diff mbox

[1/2] ath: define JP DFS patterns separated from FCC

Message ID 1427825785-21389-1-git-send-email-poh@qca.qualcomm.com (mailing list archive)
State Not Applicable
Delegated to: Kalle Valo
Headers show

Commit Message

Peter Oh March 31, 2015, 6:16 p.m. UTC
Separate Japan's DFS pattern from FCC to control PPB threshold.

Currently all the radar detectors use the same threshold rate at
50%, but it's not able to achieve if data traffic rate is higher
than 40% because WLAN baseband used by ath9k and ath10k often fails
detecting radar pulses, so that SW cannot get enough radar reports
to achieve the rate.

Since Japan's W53 band requires 50% data traffic during its DFS
test we need to apply different threshold rate than others on it.
Hence define its own pattern to give flexibility to threshold rate.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
---
 drivers/net/wireless/ath/dfs_pattern_detector.c | 27 ++++++++++++++++---------
 1 file changed, 17 insertions(+), 10 deletions(-)

Comments

Julian Calaby March 31, 2015, 11:17 p.m. UTC | #1
Hi Peter,

Two very minor points:

On Wed, Apr 1, 2015 at 5:16 AM, Peter Oh <poh@qca.qualcomm.com> wrote:
> Separate Japan's DFS pattern from FCC to control PPB threshold.
>
> Currently all the radar detectors use the same threshold rate at
> 50%, but it's not able to achieve if data traffic rate is higher
> than 40% because WLAN baseband used by ath9k and ath10k often fails
> detecting radar pulses, so that SW cannot get enough radar reports
> to achieve the rate.
>
> Since Japan's W53 band requires 50% data traffic during its DFS
> test we need to apply different threshold rate than others on it.
> Hence define its own pattern to give flexibility to threshold rate.
>
> Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
> ---
>  drivers/net/wireless/ath/dfs_pattern_detector.c | 27 ++++++++++++++++---------
>  1 file changed, 17 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c
> index b1de8c6..8d1e082 100644
> --- a/drivers/net/wireless/ath/dfs_pattern_detector.c
> +++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
> @@ -42,6 +42,7 @@ struct radar_types {
>  /* percentage on ppb threshold to trigger detection */
>  #define MIN_PPB_THRESH 50
>  #define PPB_THRESH(PPB) ((PPB * MIN_PPB_THRESH + 50) / 100)
> +#define PPB_THRESH_JP(PPB, RATE) ((PPB * RATE + 100 - RATE) / 100)

These two PPB_THRESH defines are essentially doing the same math.

Would it make sense to define them as:

#define MIN_PPB_THRESH 50
#define PPB_THRESH_RATE(PPB, RATE) ((PPB * RATE + 100 - RATE) / 100)
#define PPB_THRESH(PPB) PPB_THRESH_RATE(PPB, MIN_PPB_THRESH)

In case some other country defines a specific rate for their DFS patterns?

>  #define PRF2PRI(PRF) ((1000000 + PRF / 2) / PRF)
>  /* percentage of pulse width tolerance */
>  #define WIDTH_TOLERANCE 5
> @@ -96,17 +97,23 @@ static const struct radar_types fcc_radar_types = {
>         .radar_types            = fcc_radar_ref_types,
>  };
>
> -#define JP_PATTERN FCC_PATTERN
> +#define JP_PATTERN(ID, WMIN, WMAX, PMIN, PMAX, PRF, PPB, RATE, CHIRP)  \
> +{                                                              \
> +       ID, WIDTH_LOWER(WMIN), WIDTH_UPPER(WMAX),               \
> +       PMIN - PRI_TOLERANCE,                                   \
> +       PMAX * PRF + PRI_TOLERANCE, PRF, PPB * PRF,             \
> +       PPB_THRESH_JP(PPB, RATE), PRI_TOLERANCE, CHIRP  \
> +}
>  static const struct radar_detector_specs jp_radar_ref_types[] = {
> -       JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, false),
> -       JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, false),
> -       JP_PATTERN(2, 0, 1, 1388, 1388, 1, 18, false),
> -       JP_PATTERN(3, 1, 2, 4000, 4000, 1, 18, false),
> -       JP_PATTERN(4, 0, 5, 150, 230, 1, 23, false),
> -       JP_PATTERN(5, 6, 10, 200, 500, 1, 16, false),
> -       JP_PATTERN(6, 11, 20, 200, 500, 1, 12, false),
> -       JP_PATTERN(7, 50, 100, 1000, 2000, 1, 20, false),
> -       JP_PATTERN(5, 0, 1, 333, 333, 1, 9, false),
> +       JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, 50, false),
> +       JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, 50, false),
> +       JP_PATTERN(2, 0, 1, 1388, 1388, 1, 18, 50, false),
> +       JP_PATTERN(3, 1, 2, 4000, 4000, 1, 18, 50, false),
> +       JP_PATTERN(4, 0, 5, 150, 230, 1, 23, 50, false),
> +       JP_PATTERN(5, 6, 10, 200, 500, 1, 16, 50, false),
> +       JP_PATTERN(6, 11, 20, 200, 500, 1, 12, 50, false),
> +       JP_PATTERN(7, 50, 100, 1000, 2000, 1, 20, 50, false),
> +       JP_PATTERN(5, 0, 1, 333, 333, 1, 9, 50, false),

If no JP patterns will have CHIRP set, would it make sense to embed
that parameter into the define?

Thanks,
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c
index b1de8c6..8d1e082 100644
--- a/drivers/net/wireless/ath/dfs_pattern_detector.c
+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
@@ -42,6 +42,7 @@  struct radar_types {
 /* percentage on ppb threshold to trigger detection */
 #define MIN_PPB_THRESH	50
 #define PPB_THRESH(PPB) ((PPB * MIN_PPB_THRESH + 50) / 100)
+#define PPB_THRESH_JP(PPB, RATE) ((PPB * RATE + 100 - RATE) / 100)
 #define PRF2PRI(PRF) ((1000000 + PRF / 2) / PRF)
 /* percentage of pulse width tolerance */
 #define WIDTH_TOLERANCE 5
@@ -96,17 +97,23 @@  static const struct radar_types fcc_radar_types = {
 	.radar_types		= fcc_radar_ref_types,
 };
 
-#define JP_PATTERN FCC_PATTERN
+#define JP_PATTERN(ID, WMIN, WMAX, PMIN, PMAX, PRF, PPB, RATE, CHIRP)	\
+{								\
+	ID, WIDTH_LOWER(WMIN), WIDTH_UPPER(WMAX),		\
+	PMIN - PRI_TOLERANCE,					\
+	PMAX * PRF + PRI_TOLERANCE, PRF, PPB * PRF,		\
+	PPB_THRESH_JP(PPB, RATE), PRI_TOLERANCE, CHIRP	\
+}
 static const struct radar_detector_specs jp_radar_ref_types[] = {
-	JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, false),
-	JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, false),
-	JP_PATTERN(2, 0, 1, 1388, 1388, 1, 18, false),
-	JP_PATTERN(3, 1, 2, 4000, 4000, 1, 18, false),
-	JP_PATTERN(4, 0, 5, 150, 230, 1, 23, false),
-	JP_PATTERN(5, 6, 10, 200, 500, 1, 16, false),
-	JP_PATTERN(6, 11, 20, 200, 500, 1, 12, false),
-	JP_PATTERN(7, 50, 100, 1000, 2000, 1, 20, false),
-	JP_PATTERN(5, 0, 1, 333, 333, 1, 9, false),
+	JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, 50, false),
+	JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, 50, false),
+	JP_PATTERN(2, 0, 1, 1388, 1388, 1, 18, 50, false),
+	JP_PATTERN(3, 1, 2, 4000, 4000, 1, 18, 50, false),
+	JP_PATTERN(4, 0, 5, 150, 230, 1, 23, 50, false),
+	JP_PATTERN(5, 6, 10, 200, 500, 1, 16, 50, false),
+	JP_PATTERN(6, 11, 20, 200, 500, 1, 12, 50, false),
+	JP_PATTERN(7, 50, 100, 1000, 2000, 1, 20, 50, false),
+	JP_PATTERN(5, 0, 1, 333, 333, 1, 9, 50, false),
 };
 
 static const struct radar_types jp_radar_types = {