@@ -210,9 +210,6 @@ static tstrWID gastrWIDs[] = {
{WID_REKEY_POLICY, WID_CHAR},
{WID_REKEY_PERIOD, WID_INT},
{WID_REKEY_PACKET_COUNT, WID_INT},
-#if 0
- {WID_WEP_KEY_VALUE0, WID_STR},
-#endif
{WID_11I_PSK, WID_STR},
{WID_1X_KEY, WID_STR},
{WID_1X_SERV_ADDR, WID_IP},
@@ -1619,26 +1616,6 @@ s32 further_process_response(u8 *resp,
break;
case WID_BIN_DATA:
- #if 0
- /* FILE *fp_bin = NULL; */
- u8 first_bin_wid = 1;
- if (first_bin_wid) {
- /* fp_bin = fopen("wid_response.bin","wb"); */
- first_bin_wid = 0;
- } else {
- /* fp_bin = fopen("wid_response.bin","ab"); */
- }
-
- if (/*fp_bin == NULL*/ 0) {
- PRINT_ER("Error: Could not open wid_response.bin for write\n");
- return -2;
- }
-
- /* fwrite(resp + idx, cfg_len, 1, fp_bin); */
-
- /* fclose(fp_bin); */
- #endif
-
if (pstrWIDresult->s32ValueSize >= cfg_len) {
WILC_memcpy(pstrWIDresult->ps8WidVal, resp + idx, cfg_len);
pstrWIDresult->s32ValueSize = cfg_len;
@@ -1884,13 +1861,6 @@ s32 CreateConfigPacket(s8 *ps8packet, s32 *ps32PacketLength,
pstrWIDs[u32idx].ps8WidVal, pstrWIDs[u32idx].s32ValueSize);
break;
- #if 0
- case WID_ADR:
- ProcessAdrWid(ps8packet, ps32PacketLength, &pstrWIDs[u32idx],
- pstrWIDs[u32idx].ps8WidVal);
- break;
-
- #endif
case WID_IP:
ProcessIPwid(ps8packet, ps32PacketLength, &pstrWIDs[u32idx],
pstrWIDs[u32idx].ps8WidVal);
@@ -71,306 +71,6 @@ extern u16 g_num_total_switches;
/*****************************************************************************/
/* Type Definitions */
/*****************************************************************************/
-/* WID Data Types */
-#if 0
-typedef enum {
- WID_CHAR = 0,
- WID_SHORT = 1,
- WID_INT = 2,
- WID_STR = 3,
- WID_ADR = 4,
- WID_BIN = 5,
- WID_IP = 6,
- WID_UNDEF = 7,
- WID_TYPE_FORCE_32BIT = 0xFFFFFFFF
-} tenuWIDtype;
-
-/* WLAN Identifiers */
-typedef enum {
- WID_NIL = -1,
- /* EMAC Character WID list */
- WID_BSS_TYPE = 0x0000,
- WID_CURRENT_TX_RATE = 0x0001,
- WID_CURRENT_CHANNEL = 0x0002,
- WID_PREAMBLE = 0x0003,
- WID_11G_OPERATING_MODE = 0x0004,
- WID_STATUS = 0x0005,
- WID_11G_PROT_MECH = 0x0006,
- WID_SCAN_TYPE = 0x0007,
- WID_PRIVACY_INVOKED = 0x0008,
- WID_KEY_ID = 0x0009,
- WID_QOS_ENABLE = 0x000A,
- WID_POWER_MANAGEMENT = 0x000B,
- WID_11I_MODE = 0x000C,
- WID_AUTH_TYPE = 0x000D,
- WID_SITE_SURVEY = 0x000E,
- WID_LISTEN_INTERVAL = 0x000F,
- WID_DTIM_PERIOD = 0x0010,
- WID_ACK_POLICY = 0x0011,
- WID_RESET = 0x0012,
- WID_PCF_MODE = 0x0013,
- WID_CFP_PERIOD = 0x0014,
- WID_BCAST_SSID = 0x0015,
- WID_PHY_TEST_PATTERN = 0x0016,
- WID_DISCONNECT = 0x0016,
- WID_READ_ADDR_SDRAM = 0x0017,
- WID_TX_POWER_LEVEL_11A = 0x0018,
- WID_REKEY_POLICY = 0x0019,
- WID_SHORT_SLOT_ALLOWED = 0x001A,
- WID_PHY_ACTIVE_REG = 0x001B,
- WID_PHY_ACTIVE_REG_VAL = 0x001C,
- WID_TX_POWER_LEVEL_11B = 0x001D,
- WID_START_SCAN_REQ = 0x001E,
- WID_RSSI = 0x001F,
- WID_JOIN_REQ = 0x0020,
- WID_ANTENNA_SELECTION = 0x0021,
- WID_USER_CONTROL_ON_TX_POWER = 0x0027,
- WID_MEMORY_ACCESS_8BIT = 0x0029,
- WID_UAPSD_SUPPORT_AP = 0x002A,
- WID_CURRENT_MAC_STATUS = 0x0031,
- WID_AUTO_RX_SENSITIVITY = 0x0032,
- WID_DATAFLOW_CONTROL = 0x0033,
- WID_SCAN_FILTER = 0x0036,
- WID_LINK_LOSS_THRESHOLD = 0x0037,
- WID_AUTORATE_TYPE = 0x0038,
- WID_CCA_THRESHOLD = 0x0039,
- WID_802_11H_DFS_MODE = 0x003B,
- WID_802_11H_TPC_MODE = 0x003C,
- WID_DEVICE_READY = 0x003D,
- WID_PM_NULL_FRAME_INTERVAL = 0x003E,
- WID_PM_ACTIVITY_TIMER = 0x003F,
- WID_PM_NULL_FRAME_WAIT_ENABLE = 0x0040,
- WID_SCAN_WAIT_TIME = 0x0041,
- WID_WSC_IE_EN = 0x0042,
- WID_WPS_START = 0x0043,
- WID_WPS_DEV_MODE = 0x0044,
- WID_BT_COEXISTENCE = 0x0050,
- WID_TRACKING_ROAMING = 0x0070,
- WID_NUM_PKTS_FOR_RSSI_AVG = 0x0071,
- WID_FHSS_SCAN_CHAN_INDEX = 0x0072,
- WID_FHSS_SCAN_STEP_INDEX = 0x0073,
-
- /* NMAC Character WID list */
- WID_11N_PROT_MECH = 0x0080,
- WID_11N_ERP_PROT_TYPE = 0x0081,
- WID_11N_ENABLE = 0x0082,
- WID_11N_OPERATING_MODE = 0x0083,
- WID_11N_OBSS_NONHT_DETECTION = 0x0084,
- WID_11N_HT_PROT_TYPE = 0x0085,
- WID_11N_RIFS_PROT_ENABLE = 0x0086,
- WID_11N_SMPS_MODE = 0x0087,
- WID_11N_CURRENT_TX_MCS = 0x0088,
- WID_11N_PRINT_STATS = 0x0089,
- WID_HUT_FCS_CORRUPT_MODE = 0x008A,
- WID_HUT_RESTART = 0x008B,
- WID_HUT_TX_FORMAT = 0x008C,
- WID_11N_SHORT_GI_20MHZ_ENABLE = 0x008D,
- WID_HUT_BANDWIDTH = 0x008E,
- WID_HUT_OP_BAND = 0x008F,
- WID_HUT_STBC = 0x0090,
- WID_HUT_ESS = 0x0091,
- WID_HUT_ANTSET = 0x0092,
- WID_HUT_HT_OP_MODE = 0x0093,
- WID_HUT_RIFS_MODE = 0x0094,
- WID_HUT_SMOOTHING_REC = 0x0095,
- WID_HUT_SOUNDING_PKT = 0x0096,
- WID_HUT_HT_CODING = 0x0097,
- WID_HUT_TEST_DIR = 0x0098,
- WID_HUT_CAPTURE_MODE = 0x0099,
- WID_HUT_PHY_TEST_MODE = 0x009A,
- WID_HUT_PHY_TEST_RATE_HI = 0x009B,
- WID_HUT_PHY_TEST_RATE_LO = 0x009C,
- WID_HUT_DISABLE_RXQ_REPLENISH = 0x009D,
- WID_HUT_KEY_ORIGIN = 0x009E,
- WID_HUT_BCST_PERCENT = 0x009F,
- WID_HUT_GROUP_CIPHER_TYPE = 0x00A0,
- WID_TX_ABORT_CONFIG = 0x00A1,
- WID_HOST_DATA_IF_TYPE = 0x00A2,
- WID_HOST_CONFIG_IF_TYPE = 0x00A3,
- WID_HUT_TSF_TEST_MODE = 0x00A4,
- WID_HUT_TSSI_VALUE = 0x00A5,
- WID_HUT_PKT_TSSI_VALUE = 0x00A5,
- WID_REG_TSSI_11B_VALUE = 0x00A6,
- WID_REG_TSSI_11G_VALUE = 0x00A7,
- WID_REG_TSSI_11N_VALUE = 0x00A8,
- WID_TX_CALIBRATION = 0x00A9,
- WID_DSCR_TSSI_11B_VALUE = 0x00AA,
- WID_DSCR_TSSI_11G_VALUE = 0x00AB,
- WID_DSCR_TSSI_11N_VALUE = 0x00AC,
- WID_HUT_RSSI_EX = 0x00AD,
- WID_HUT_ADJ_RSSI_EX = 0x00AE,
- WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF,
- WID_11N_TXOP_PROT_DISABLE = 0x00B0,
- WID_TX_POWER_LEVEL_11N = 0x00B1,
- WID_HUT_MGMT_PERCENT = 0x00B3,
- WID_HUT_MGMT_BCST_PERCENT = 0x00B4,
- WID_HUT_MGMT_ALLOW_HT = 0x00B5,
- WID_HUT_UC_MGMT_TYPE = 0x00B6,
- WID_HUT_BC_MGMT_TYPE = 0x00B7,
- WID_HUT_11W_MFP_REQUIRED_TX = 0x00B8,
- WID_HUT_11W_MFP_PEER_CAPABLE = 0x00B9,
- WID_HUT_11W_TX_IGTK_ID = 0x00BA,
- WID_11W_ENABLE = 0x00BB,
- WID_11W_MGMT_PROT_REQ = 0x00BC,
- WID_USER_SEC_CHANNEL_OFFSET = 0x00C0,
- WID_2040_COEXISTENCE = 0x00C1,
- WID_HUT_FC_TXOP_MOD = 0x00C2,
- WID_HUT_FC_PROT_TYPE = 0x00C3,
- WID_HUT_SEC_CCA_ASSERT = 0x00C4,
- WID_2040_ENABLE = 0x00C5,
- WID_2040_CURR_CHANNEL_OFFSET = 0x00C6,
- WID_2040_40MHZ_INTOLERANT = 0x00C7,
-
-
- /* Custom Character WID list */
- WID_POWER_SAVE = 0x0100,
- WID_WAKE_STATUS = 0x0101,
- WID_WAKE_CONTROL = 0x0102,
- WID_CCA_BUSY_START = 0x0103,
-
- /* EMAC Short WID list */
- WID_RTS_THRESHOLD = 0x1000,
- WID_FRAG_THRESHOLD = 0x1001,
- WID_SHORT_RETRY_LIMIT = 0x1002,
- WID_LONG_RETRY_LIMIT = 0x1003,
- WID_CFP_MAX_DUR = 0x1004,
- WID_PHY_TEST_FRAME_LEN = 0x1005,
- WID_BEACON_INTERVAL = 0x1006,
- WID_MEMORY_ACCESS_16BIT = 0x1008,
- WID_RX_SENSE = 0x100B,
- WID_ACTIVE_SCAN_TIME = 0x100C,
- WID_PASSIVE_SCAN_TIME = 0x100D,
- WID_SITE_SURVEY_SCAN_TIME = 0x100E,
- WID_JOIN_START_TIMEOUT = 0x100F,
- WID_AUTH_TIMEOUT = 0x1010,
- WID_ASOC_TIMEOUT = 0x1011,
- WID_11I_PROTOCOL_TIMEOUT = 0x1012,
- WID_EAPOL_RESPONSE_TIMEOUT = 0x1013,
- WID_WPS_PASS_ID = 0x1017,
- WID_WPS_CONFIG_METHOD = 0x1018,
- WID_FHSS_INIT_SCAN_TIME = 0x1070,
- WID_FHSS_ROAM_SCAN_TIME = 0x1071,
-
- /* NMAC Short WID list */
- WID_11N_RF_REG_VAL = 0x1080,
- WID_HUT_FRAME_LEN = 0x1081,
- WID_HUT_TXOP_LIMIT = 0x1082,
- WID_HUT_SIG_QUAL_AVG = 0x1083,
- WID_HUT_SIG_QUAL_AVG_CNT = 0x1084,
- WID_11N_SIG_QUAL_VAL = 0x1085,
- WID_HUT_RSSI_EX_COUNT = 0x1086,
- WID_HUT_UC_MGMT_FRAME_LEN = 0x1088,
- WID_HUT_BC_MGMT_FRAME_LEN = 0x1089,
-
- /* Custom Short WID list */
-
- WID_CCA_BUSY_STATUS = 0x1100,
-
- /* EMAC Integer WID list */
- WID_FAILED_COUNT = 0x2000,
- WID_RETRY_COUNT = 0x2001,
- WID_MULTIPLE_RETRY_COUNT = 0x2002,
- WID_FRAME_DUPLICATE_COUNT = 0x2003,
- WID_ACK_FAILURE_COUNT = 0x2004,
- WID_RECEIVED_FRAGMENT_COUNT = 0x2005,
- WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006,
- WID_FCS_ERROR_COUNT = 0x2007,
- WID_SUCCESS_FRAME_COUNT = 0x2008,
- WID_PHY_TEST_PKT_CNT = 0x2009,
- WID_HUT_TX_COUNT = 0x200A,
- WID_TX_FRAGMENT_COUNT = 0x200B,
- WID_TX_MULTICAST_FRAME_COUNT = 0x200C,
- WID_RTS_SUCCESS_COUNT = 0x200D,
- WID_RTS_FAILURE_COUNT = 0x200E,
- WID_WEP_UNDECRYPTABLE_COUNT = 0x200F,
- WID_REKEY_PERIOD = 0x2010,
- WID_REKEY_PACKET_COUNT = 0x2011,
- WID_1X_SERV_ADDR = 0x2012,
- WID_STACK_IP_ADDR = 0x2013,
- WID_STACK_NETMASK_ADDR = 0x2014,
- WID_HW_RX_COUNT = 0x2015,
- WID_MEMORY_ADDRESS = 0x201E,
- WID_MEMORY_ACCESS_32BIT = 0x201F,
- WID_RF_REG_VAL = 0x2021,
- WID_FIRMWARE_INFO = 0x2023,
- WID_DEV_OS_VERSION = 0x2025,
- WID_ROAM_RSSI_THESHOLDS = 0x2070,
- WID_TRACK_INTERVAL_SEC = 0x2071,
- WID_FHSS_HOPPING_PARAMS = 0x2072,
- WID_FHSS_HOP_DWELL_TIME = 0x2073,
-
- /* NMAC Integer WID list */
- WID_11N_PHY_ACTIVE_REG_VAL = 0x2080,
- WID_HUT_NUM_TX_PKTS = 0x2081,
- WID_HUT_TX_TIME_TAKEN = 0x2082,
- WID_HUT_TX_TEST_TIME = 0x2083,
- WID_HUT_LOG_INTERVAL = 0x2084,
-
- /* EMAC String WID list */
- WID_SSID = 0x3000,
- WID_FIRMWARE_VERSION = 0x3001,
- WID_OPERATIONAL_RATE_SET = 0x3002,
- WID_BSSID = 0x3003,
- #if 0
- WID_WEP_KEY_VALUE0 = 0x3004,
- #endif
- WID_11I_PSK = 0x3008,
- WID_11E_P_ACTION_REQ = 0x3009,
- WID_1X_KEY = 0x300A,
- WID_HARDWARE_VERSION = 0x300B,
- WID_MAC_ADDR = 0x300C,
- WID_HUT_DEST_ADDR = 0x300D,
- /*WID_HUT_STATS = 0x300E,*/
- WID_PHY_VERSION = 0x300F,
- WID_SUPP_USERNAME = 0x3010,
- WID_SUPP_PASSWORD = 0x3011,
- WID_SITE_SURVEY_RESULTS = 0x3012,
- WID_RX_POWER_LEVEL = 0x3013,
- WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */
- WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */
- WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */
- WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */
-
- WID_ASSOC_RES_INFO = 0x3020,
-
- /* NMAC String WID list */
- WID_11N_P_ACTION_REQ = 0x3080,
- WID_HUT_TEST_ID = 0x3081,
- WID_PMKID_INFO = 0x3082,
-
- /* Custom String WID list */
- WID_FLASH_DATA = 0x3100,
- WID_EEPROM_DATA = 0x3101,
- WID_SERIAL_NUMBER = 0x3102,
-
- /* EMAC Binary WID list */
- WID_UAPSD_CONFIG = 0x4001,
- WID_UAPSD_STATUS = 0x4002,
- WID_AC_PARAMS_AP = 0x4003,
- WID_AC_PARAMS_STA = 0x4004,
- WID_NEWORK_INFO = 0x4005,
- WID_WPS_CRED_LIST = 0x4006,
- WID_PRIM_DEV_TYPE = 0x4007,
- WID_STA_JOIN_INFO = 0x4008,
- WID_CONNECTED_STA_LIST = 0x4009,
-
- /* NMAC Binary WID list */
- WID_11N_AUTORATE_TABLE = 0x4080,
- WID_HUT_TX_PATTERN = 0x4081,
- WID_HUT_STATS = 0x4082,
- WID_HUT_LOG_STATS = 0x4083,
-
- /*BugID_3746 WID to add IE to be added in next probe request*/
- WID_INFO_ELEMENT_PROBE = 0x4085,
- /*BugID_3746 WID to add IE to be added in next associate request*/
- WID_INFO_ELEMENT_ASSOCIATE = 0x4086,
-
- /* Miscellaneous WIDs */
- WID_ALL = 0x7FFE,
- WID_MAX = 0xFFFF
-} tenuWIDid;
-#endif
-
/* Status Codes for Authentication and Association Frames */
typedef enum {
SUCCESSFUL_STATUSCODE = 0,
@@ -1261,13 +1261,6 @@ static s32 Handle_Scan(void *drvHandler, tstrHostIFscanAttr *pstrHostIFscanAttr)
pstrWFIDrv->strWILC_UsrScanReq.u32UserScanPvoid = pstrHostIFscanAttr->pvUserArg;
#ifdef WILC_P2P
- #if 0
- if (pstrWFIDrv->enuHostIFstate == HOST_IF_P2P_LISTEN || (pstrWFIDrv->enuHostIFstate == HOST_IF_CONNECTED && pstrWFIDrv->u8P2PConnect)) {
- PRINT_INFO(GENERIC_DBG, "Busy: State: %d\n", pstrWFIDrv->enuHostIFstate);
- PRINT_INFO(GENERIC_DBG, "Current Jiffies: %lu Timeout:%llu\n", jiffies, pstrWFIDrv->u64P2p_MgmtTimeout);
- WILC_ERRORREPORT(s32Error, WILC_BUSY);
- }
- #endif
#endif
if ((pstrWFIDrv->enuHostIFstate >= HOST_IF_SCANNING) && (pstrWFIDrv->enuHostIFstate < HOST_IF_CONNECTED)) {
@@ -1682,17 +1675,6 @@ static s32 Handle_Connect(void *drvHandler, tstrHostIFconnectAttr *pstrHostIFcon
}
#endif /*WILC_PARSE_SCAN_IN_HOST*/
-#if 0
- /* if we try to connect to an already connected AP then discard the request */
- PRINT_D(GENERIC_DBG, "Bssid = %x:%x:%x:%x:%x:%x\n", (pstrHostIFconnectAttr->pu8bssid[0]), (pstrHostIFconnectAttr->pu8bssid[1]), (pstrHostIFconnectAttr->pu8bssid[2]), (pstrHostIFconnectAttr->pu8bssid[3]), (pstrHostIFconnectAttr->pu8bssid[4]), (pstrHostIFconnectAttr->pu8bssid[5]));
- PRINT_D(GENERIC_DBG, "bssid = %x:%x:%x:%x:%x:%x\n", (u8ConnectedSSID[0]), (u8ConnectedSSID[1]), (u8ConnectedSSID[2]), (u8ConnectedSSID[3]), (u8ConnectedSSID[4]), (u8ConnectedSSID[5]));
- if (WILC_memcmp(pstrHostIFconnectAttr->pu8bssid, u8ConnectedSSID, ETH_ALEN) == 0) {
- PRINT_ER("Discard connect request\n");
- s32Error = WILC_FAIL;
- return s32Error;
- }
-#endif
-
if (pstrHostIFconnectAttr->pu8bssid != NULL) {
pstrWFIDrv->strWILC_UsrConnReq.pu8bssid = (u8 *)WILC_MALLOC(6);
WILC_memcpy(pstrWFIDrv->strWILC_UsrConnReq.pu8bssid, pstrHostIFconnectAttr->pu8bssid, 6);
@@ -5101,65 +5083,7 @@ s32 host_int_add_rx_gtk(WILC_WFIDrvHandle hWFIDrv, const u8 *pu8RxGtk, u8 u8GtkK
}
return s32Error;
}
-#if 0
-/**
- * @brief host_int_add_tx_gtk
- * @details adds Tx GTk Key
- * @param[in,out] handle to the wifi driver
- * @param[in] message containing Tx GTK Key in the following format
- *|----------------------------------------------------|
- | KeyID | Key Length | Temporal Key | Tx Michael Key |
- ||-------|------------|--------------|----------------|
- ||1 byte | 1 byte | 16 bytes | 8 bytes |
- ||----------------------------------------------------|
- * @return Error code indicating success/failure
- * @note
- * @author zsalah
- * @date 8 March 2012
- * @version 1.0
- */
-s32 host_int_add_tx_gtk(WILC_WFIDrvHandle hWFIDrv, u8 u8KeyLen, u8 *pu8TxGtk, u8 u8KeyIdx)
-{
- s32 s32Error = WILC_SUCCESS;
- tstrWILC_WFIDrv *pstrWFIDrv = (tstrWILC_WFIDrv *)hWFIDrv;
- tstrHostIFmsg strHostIFmsg;
-
- if (pstrWFIDrv == NULL) {
- WILC_ERRORREPORT(s32Error, WILC_INVALID_ARGUMENT);
- }
- /* prepare the Key Message */
- WILC_memset(&strHostIFmsg, 0, sizeof(tstrHostIFmsg));
-
- strHostIFmsg.u16MsgId = HOST_IF_MSG_KEY;
- strHostIFmsg.uniHostIFmsgBody.strHostIFkeyAttr.enuKeyType = WPATxGtk;
- strHostIFmsg.uniHostIFmsgBody.strHostIFkeyAttr.u8KeyAction = ADDKEY;
-
- strHostIFmsg.uniHostIFmsgBody.strHostIFkeyAttr.
- uniHostIFkeyAttr.strHostIFwpaAttr.pu8key = (u8 *)WILC_MALLOC(u8KeyLen);
-
- WILC_memcpy(strHostIFmsg.uniHostIFmsgBody.strHostIFkeyAttr.uniHostIFkeyAttr.strHostIFwpaAttr.pu8key,
- pu8TxGtk, u8KeyLen);
-
- strHostIFmsg.uniHostIFmsgBody.strHostIFkeyAttr.uniHostIFkeyAttr.strHostIFwpaAttr.u8Keylen = u8KeyLen;
-
- /* send the message */
- s32Error = WILC_MsgQueueSend(&gMsgQHostIF, &strHostIFmsg, sizeof(tstrHostIFmsg), NULL);
- if (s32Error)
- PRINT_ER("Error in sending message queue: TX GTK\n");
-
- /* ////////////// */
- down(&hSemTestKeyBlock);
- WILC_Sleep(100);
- /* /////// */
-
- WILC_CATCH(s32Error)
- {
-
- }
- return s32Error;
-}
-#endif
/**
* @brief host_int_set_pmkid_info
* @details caches the pmkid valid only in BSS STA mode if External Supplicant
@@ -15,48 +15,6 @@
/*****************************************************************************/
/* Macros */
/*****************************************************************************/
-#if 0
-#define WID_BSS_TYPE 0x0000
-#define WID_CURRENT_TX_RATE 0x0001
-#define WID_CURRENT_CHANNEL 0x0002
-#define WID_PREAMBLE 0x0003
-#define WID_STATUS 0x0005
-#define WID_SCAN_TYPE 0x0007
-#define WID_KEY_ID 0x0009
-#define WID_DTIM_PERIOD 0x0010
-#define WID_POWER_MANAGEMENT 0x000B
-#define WID_AUTH_TYPE 0x000D
-#define WID_SITE_SURVEY 0x000E
-#define WID_DTIM_PERIOD 0x0010
-#define WID_DISCONNECT 0x0016
-#define WID_SHORT_SLOT_ALLOWED 0x001A
-#define WID_START_SCAN_REQ 0x001E
-#define WID_RSSI 0x001F
-#define WID_JOIN_REQ 0x0020
-#define WID_11N_TXOP_PROT_DISABLE 0x00B0
-#define WID_RTS_THRESHOLD 0x1000
-#define WID_FRAG_THRESHOLD 0x1001
-#define WID_SHORT_RETRY_LIMIT 0x1002
-#define WID_LONG_RETRY_LIMIT 0x1003
-#define WID_BEACON_INTERVAL 0x1006
-#define WID_ACTIVE_SCAN_TIME 0x100C
-#define WID_PASSIVE_SCAN_TIME 0x100D
-#define WID_SITE_SURVEY_SCAN_TIME 0x100E
-#define WID_AUTH_TIMEOUT 0x1010
-#define WID_11I_PSK 0x3008
-#define WID_SITE_SURVEY_RESULTS 0x3012
-#define WID_ADD_PTK 0x301B
-#define WID_ADD_RX_GTK 0x301C
-#define WID_ADD_TX_GTK 0x301D
-#define WID_ADD_WEP_KEY 0x3019
-#define WID_REMOVE_WEP_KEY 0x301A
-#define WID_REMOVE_KEY 0x301E
-#define WID_ASSOC_REQ_INFO 0x301F
-#define WID_ASSOC_RES_INFO 0x3020
-#define WID_PMKID_INFO 0x3082
-#define WID_SCAN_CHANNEL_LIST 0x4084
-#define WID_11I_MODE 0x000C
-#endif
#define FAIL 0x0000
#define SUCCESS 0x0001
@@ -115,16 +73,6 @@
/* typedef unsigned long uint32; */
/* typedef uint32 Bool; */
-#if 0
-typedef enum {WID_CHAR = 0,
- WID_SHORT = 1,
- WID_INT = 2,
- WID_STR = 3,
- WID_ADR = 4,
- WID_BIN = 5,
- WID_IP = 6,
- WID_UNDEF = 7} WID_TYPE_T;
-#endif
typedef struct {
u16 cfg_wid;
WID_TYPE_T cfg_type;
@@ -160,18 +108,7 @@ typedef struct _tstrHostIFpmkidAttr {
u8 numpmkid;
tstrHostIFpmkid pmkidlist[WILC_MAX_NUM_PMKIDS];
} tstrHostIFpmkidAttr;
-#if 0
-/* Scan type parameter for scan request */
-typedef enum {
- PASSIVE_SCAN = 0,
- ACTIVE_SCAN = 1,
- NUM_SCANTYPE
-} tenuScanType;
-
-typedef enum {SITE_SURVEY_1CH = 0,
- SITE_SURVEY_ALL_CH = 1,
- SITE_SURVEY_OFF = 2} SITE_SURVEY_T;
-#endif
+
typedef enum {
AUTORATE = 0,
MBPS_1 = 1,
@@ -533,51 +533,6 @@ struct net_device *WILC_WFI_init_mon_interface(const char *name, struct net_devi
if (wilc_wfi_mon) {
return wilc_wfi_mon;
}
-#if 0
- wilc_wfi_mon = alloc_netdev(sizeof(struct WILC_WFI_mon_priv), name, WILC_WFI_mon_setup);
- if (wilc_wfi_mon == NULL) {
- PRINT_ER("Failed to allocate netdevice\n");
- goto failed;
- }
-
- /* rtnl_lock(); */
- PRINT_INFO(HOSTAPD_DBG, "Monitor interface name %s\n", wilc_wfi_mon->name);
-
-
- ret = dev_alloc_name(wilc_wfi_mon, wilc_wfi_mon->name);
- if (ret < 0)
- goto failed_mon;
-
-
- priv = netdev_priv(wilc_wfi_mon);
- if (priv == NULL) {
- PRINT_ER("private structure is NULL\n");
- return WILC_FAIL;
- }
-
- priv->real_ndev = real_dev;
-
-
- ret = register_netdevice(wilc_wfi_mon);
-
-
- if (ret < 0) {
- PRINT_ER("Failed to register netdevice\n");
- goto failed_mon;
- }
-
-
- return WILC_SUCCESS;
- /* rtnl_unlock(); */
-
-failed:
- return ret;
-
-failed_mon:
- /* rtnl_unlock(); */
- free_netdev(wilc_wfi_mon);
- return ret;
-#endif
wilc_wfi_mon = alloc_etherdev(sizeof(struct WILC_WFI_mon_priv));
if (!wilc_wfi_mon) {
@@ -756,28 +756,6 @@ static void linux_wlan_mac_indicate(int flag)
}
if (pd->mac_status == WILC_MAC_STATUS_CONNECT) { /* Connect */
-#if 0
- /**
- * get the mac and bssid address
- **/
- PRINT_D(RX_DBG, "Calling cfg_get to get MAC_ADDR\n");
- pd->oup.wlan_cfg_get(1, WID_MAC_ADDR, 0);
- PRINT_D(RX_DBG, "Calling cfg_get to get BSSID\n");
- pd->oup.wlan_cfg_get(0, WID_BSSID, 1);
-
- /**
- * get the value
- **/
- pd->oup.wlan_cfg_get_value(WID_MAC_ADDR, pd->eth_src_address, 6);
- pd->oup.wlan_cfg_get_value(WID_BSSID, pd->eth_dst_address, 6);
-
- PRINT_D(GENERIC_DBG, "Source Address = %s", pd->eth_src_address);
- PRINT_D(GENERIC_DBG, "Destiation Address = %s", pd->eth_dst_address);
-
- /**
- * launch ndis
- **/
-#endif
}
} else if (flag == WILC_MAC_INDICATE_SCAN) {
@@ -294,13 +294,6 @@ static int sdio_write_reg(uint32_t addr, uint32_t data)
g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53, write reg (%08x)...\n", addr);
goto _fail_;
}
-
-#if 0
- if (!sdio_check_bs())
- goto _fail_;
-#else
- /* g_sdio.os_func.os_sleep(1); */
-#endif
}
return 1;
@@ -463,14 +456,6 @@ static int sdio_write(uint32_t addr, uint8_t *buf, uint32_t size)
buf += nblk * block_size;
#endif /* platform */
-
-#if 0
- if (!sdio_check_bs())
- goto _fail_;
-#else
- /* g_sdio.os_func.os_sleep(1); */
-#endif
-
}
@@ -490,13 +475,6 @@ static int sdio_write(uint32_t addr, uint8_t *buf, uint32_t size)
g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53 [%x], bytes send...\n", addr);
goto _fail_;
}
-
-#if 0
- if (!sdio_check_bs())
- goto _fail_;
-#else
- /* g_sdio.os_func.os_sleep(1); */
-#endif
}
return 1;
@@ -539,13 +517,6 @@ static int sdio_read_reg(uint32_t addr, uint32_t *data)
g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53, read reg (%08x)...\n", addr);
goto _fail_;
}
-
-#if 0
- if (!sdio_check_bs())
- goto _fail_;
-#else
- /* g_sdio.os_func.os_sleep(1); */
-#endif
}
#ifdef BIG_ENDIAN
@@ -712,14 +683,6 @@ static int sdio_read(uint32_t addr, uint8_t *buf, uint32_t size)
buf += nblk * block_size;
#endif /* platform */
-
-#if 0
- if (!sdio_check_bs())
- goto _fail_;
-#else
- /* g_sdio.os_func.os_sleep(1); */
-#endif
-
} /* if (nblk > 0) */
if (nleft > 0) {
@@ -738,13 +701,6 @@ static int sdio_read(uint32_t addr, uint8_t *buf, uint32_t size)
g_sdio.dPrint(N_ERR, "[wilc sdio]: Failed cmd53 [%x], bytes read...\n", addr);
goto _fail_;
}
-
-#if 0
- if (!sdio_check_bs())
- goto _fail_;
-#else
- /* g_sdio.os_func.os_sleep(1); */
-#endif
}
return 1;
@@ -421,42 +421,6 @@ static int spi_cmd_complete(uint8_t cmd, uint32_t adr, uint8_t *b, uint32_t sz,
return result;
}
-#if 0
- {
- int jj;
- PRINT_D(BUS_DBG, "--- cnd = %x, len=%d, len2=%d\n", cmd, len, len2);
- for (jj = 0; jj < sizeof(wb) / sizeof(wb[0]); jj++) {
-
- if (jj >= len2)
- break;
- if (((jj + 1) % 16) != 0) {
- if ((jj % 16) == 0) {
- PRINT_D(BUS_DBG, "wb[%02x]: %02x ", jj, wb[jj]);
- } else {
- PRINT_D(BUS_DBG, "%02x ", wb[jj]);
- }
- } else {
- PRINT_D(BUS_DBG, "%02x\n", wb[jj]);
- }
- }
-
- for (jj = 0; jj < sizeof(rb) / sizeof(rb[0]); jj++) {
-
- if (jj >= len2)
- break;
- if (((jj + 1) % 16) != 0) {
- if ((jj % 16) == 0) {
- PRINT_D(BUS_DBG, "rb[%02x]: %02x ", jj, rb[jj]);
- } else {
- PRINT_D(BUS_DBG, "%02x ", rb[jj]);
- }
- } else {
- PRINT_D(BUS_DBG, "%02x\n", rb[jj]);
- }
- }
- }
-#endif
-
/**
* Command/Control response
**/
@@ -552,10 +516,7 @@ static int spi_cmd_complete(uint8_t cmd, uint32_t adr, uint8_t *b, uint32_t sz,
for (ix = 0; (rix < len2) && (ix < sz); ) {
b[ix++] = rb[rix++];
}
-#if 0
- if (ix)
- PRINT_D(BUS_DBG, "ttt %d %d\n", sz, ix);
-#endif
+
sz -= ix;
if (sz > 0) {
@@ -596,9 +557,6 @@ static int spi_cmd_complete(uint8_t cmd, uint32_t adr, uint8_t *b, uint32_t sz,
while (sz > 0) {
int nbytes;
-#if 0
- PRINT_INFO(BUS_DBG, "rrr %d %d\n", sz, ix);
-#endif
if (sz <= DATA_PKT_SZ) {
nbytes = sz;
} else {
@@ -788,32 +746,6 @@ static int spi_data_write(uint8_t *b, uint32_t sz)
/**
* No need to wait for response
**/
-#if 0
- /**
- * Respnose
- **/
- if (!g_spi.spi_rx(&rsp, 1)) {
- PRINT_ER("[wilc spi]: Failed data block write, response read, bus error...\n");
- result = N_FAIL;
- break;
- }
-
- if (((rsp >> 4) & 0xf) != 0xc) {
- result = N_FAIL;
- PRINT_ER("[wilc spi]: Failed data block write response...(%02x)\n", rsp);
- break;
- }
-
- /**
- * State
- **/
- if (!g_spi.spi_rx(&rsp, 1)) {
- PRINT_ER("[wilc spi]: Failed data block write, read state, bus error...\n");
- result = N_FAIL;
- break;
- }
-#endif
-
ix += nbytes;
sz -= nbytes;
} while (sz);
@@ -332,15 +332,6 @@ void WILC_WFI_Rx(struct net_device *dev, struct WILC_WFI_packet *pkt)
WILC_WFI_monitor_rx(dev, skb);
return;
}
-#if 0
- PRINT_D(RX_DBG, "In RX NORMAl Device name %s\n", dev->name);
- /* Write metadata, and then pass to the receive level */
- skb->dev = dev;
- skb->protocol = eth_type_trans(skb, dev);
- skb->ip_summed = CHECKSUM_UNNECESSARY; /* don't check it */
- WILC_WFI_update_stats(priv->dev->ieee80211_ptr->wiphy, pkt->datalen, WILC_WFI_RX_PKT);
- netif_rx(skb);
-#endif
out:
return;
}
@@ -2044,37 +2044,6 @@ uint32_t init_chip(void)
}
}
-
- #if 0
- if ((chipid & 0xfff) < 0xf0) {
- /* Setting MUX to probe sleep signal on pin 6 of J216*/
- g_wlan.hif_func.hif_write_reg(0x1060, 0x1);
- g_wlan.hif_func.hif_write_reg(0x1180, 0x33333333);
- g_wlan.hif_func.hif_write_reg(0x1184, 0x33333333);
- g_wlan.hif_func.hif_read_reg(0x1408, ®);
- /* set MUX for GPIO_4 (pin 4) to cortus GPIO*/
- reg &= ~((0x7 << 16));
- g_wlan.hif_func.hif_write_reg(0x1408, (reg | (0x7 << 12)));
- } else {
- /* Enable test bus*/
- g_wlan.hif_func.hif_write_reg(0x1060, 0x1);
- /* Rotate bus signals to get sleep signal on pin 6 like it was on previous chips*/
- g_wlan.hif_func.hif_write_reg(0x1188, 0x70);
- /* Set output of pin 6 to test bus 0x1*/
- /* Set output of pin 9 to test bus 0x2*/
- g_wlan.hif_func.hif_write_reg(0x1180, 0x200100);
- g_wlan.hif_func.hif_read_reg(0x1408, ®);
-
- /* set MUX for GPIO_4 (pin 4) to cortus GPIO*/
- reg &= ~((0x7 << 16));
- /* set MUX for GPIO_3 (pin 6) to test bus*/
- reg |= (0x7 << 12) | (0x7 << 24);
- g_wlan.hif_func.hif_write_reg(0x1408, reg);
- }
- #endif
-
-
-
release_bus(RELEASE_ONLY);
return ret;
@@ -374,11 +374,6 @@ static int wilc_wlan_parse_info_frame(uint8_t *info, int size)
int type = WILC_CFG_RSP_STATUS;
wid = info[0] | (info[1] << 8);
-#if 0
-#ifdef BIG_ENDIAN
- wid = BYTE_SWAP(wid);
-#endif
-#endif
len = info[2];
PRINT_INFO(GENERIC_DBG, "Status Len = %d Id= %d\n", len, wid);
@@ -390,27 +385,6 @@ static int wilc_wlan_parse_info_frame(uint8_t *info, int size)
return type;
}
-#if 0
-static int wilc_wlan_parse_network_frame(uint8_t *info, int size)
-{
- wilc_mac_cfg_t *priv = (wilc_mac_cfg_t *)&g_mac;
- uint32_t wid, len;
-
- wid = info[0] | (info[1] << 8);
- len = info[2] | (info[3] << 8);
-
- /**
- * Review: this message is only for AP mode.
- * TBD
- **/
- if (wid == WID_NETWORK_INFO) { /* not send by the firmware */
-
- }
-
- return;
-}
-#endif
-
/********************************************
*
* Configuration Exported Functions
@@ -169,28 +169,6 @@ typedef struct {
wilc_wlan_indicate_func_t indicate_func;
} wilc_wlan_inp_t;
-#if 0
-typedef struct {
- int start;
- uint32_t id;
- void *buffer;
- uint32_t buffer_size;
- int commit;
-} wilc_wlan_cfg_set_t;
-
-typedef struct {
- int start;
- uint32_t id;
- int commit;
-} wilc_wlan_cfg_get_t;
-
-typedef struct {
- uint32_t id;
- void *buffer;
- uint32_t buffer_size;
-} wilc_wlan_cfg_val_t;
-#endif
-
struct tx_complete_data {
#ifdef WILC_FULLY_HOSTING_AP
struct tx_complete_data *next;
Remove the commented codes using #if 0. Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com> --- V2: revert commented code using typedef and rebase latest staging-testing. drivers/staging/wilc1000/coreconfigurator.c | 30 --- drivers/staging/wilc1000/coreconfigurator.h | 300 -------------------------- drivers/staging/wilc1000/host_interface.c | 76 ------- drivers/staging/wilc1000/host_interface.h | 65 +----- drivers/staging/wilc1000/linux_mon.c | 45 ---- drivers/staging/wilc1000/linux_wlan.c | 22 -- drivers/staging/wilc1000/wilc_sdio.c | 44 ---- drivers/staging/wilc1000/wilc_spi.c | 70 +----- drivers/staging/wilc1000/wilc_wfi_netdevice.c | 9 - drivers/staging/wilc1000/wilc_wlan.c | 31 --- drivers/staging/wilc1000/wilc_wlan_cfg.c | 26 --- drivers/staging/wilc1000/wilc_wlan_if.h | 22 -- 12 files changed, 2 insertions(+), 738 deletions(-)