diff mbox

ath9k: enable hw manual peak calibration for QCA9561

Message ID 1441076169-13398-1-git-send-email-miaoqing@qca.qualcomm.com (mailing list archive)
State Accepted
Delegated to: Kalle Valo
Headers show

Commit Message

miaoqing pan Sept. 1, 2015, 2:56 a.m. UTC 
From: Miaoqing Pan <miaoqing@qca.qualcomm.com>

This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/
2015-August/034979.html. As the peak detect calibration is set
incorrectly.

Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

Comments

Kalle Valo Sept. 29, 2015, 7:34 a.m. UTC | #1 
> From: Miaoqing Pan <miaoqing@qca.qualcomm.com>
> 
> This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/
> 2015-August/034979.html. As the peak detect calibration is set
> incorrectly.
> 
> Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com>

Thanks, applied to wireless-drivers-next.git.

Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 174442b..0c39199 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1249,7 +1249,8 @@  static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g)
 		REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
 			      AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, 0x0);
 
-	if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
+	if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah) ||
+	    AR_SREV_9561(ah)) {
 		if (is_2g)
 			REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
 				      AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR,
@@ -1640,7 +1641,8 @@  static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
 
 skip_tx_iqcal:
 	if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) {
-		if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) {
+		if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah) ||
+		    AR_SREV_9561(ah)) {
 			for (i = 0; i < AR9300_MAX_CHAINS; i++) {
 				if (!(ah->rxchainmask & (1 << i)))
 					continue;