@@ -26,8 +26,6 @@
#include <linux/version.h>
#include <linux/semaphore.h>
-#include "linux_wlan_sdio.h"
-
static int dev_state_ev_handler(struct notifier_block *this, unsigned long event, void *ptr);
static struct notifier_block g_dev_notifier = {
@@ -826,9 +824,10 @@ void wilc1000_wlan_deinit(struct wilc *nic)
#endif
PRINT_D(INIT_DBG, "Disabling IRQ\n");
- if (wilc1000_dev->gpio < 0) {
+ if (wilc1000_dev->gpio < 0 &&
+ wilc1000_dev->ops->disable_interrupt) {
mutex_lock(&wilc1000_dev->hif_cs);
- wilc1000_sdio_disable_interrupt();
+ wilc1000_dev->ops->disable_interrupt(wilc1000_dev);
mutex_unlock(&wilc1000_dev->hif_cs);
}
if (&wilc1000_dev->txq_event != NULL)
@@ -845,11 +844,12 @@ void wilc1000_wlan_deinit(struct wilc *nic)
PRINT_D(INIT_DBG, "Deinitializing WILC Wlan\n");
wilc_wlan_cleanup();
#if defined(PLAT_ALLWINNER_A20) || defined(PLAT_ALLWINNER_A23) || defined(PLAT_ALLWINNER_A31)
- if (wilc1000_dev->gpio < 0) {
+ if (wilc1000_dev->gpio < 0 &&
+ wilc1000_dev->ops->disable_interrupt) {
PRINT_D(INIT_DBG, "Disabling IRQ 2\n");
mutex_lock(&wilc1000_dev->hif_cs);
- wilc1000_sdio_disable_interrupt();
+ wilc1000_dev->ops->disable_interrupt(wilc1000_dev);
mutex_unlock(&wilc1000_dev->hif_cs);
#endif
@@ -983,7 +983,9 @@ int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic)
goto _fail_threads_;
}
- if (wilc1000_dev->gpio < 0 && wilc1000_sdio_enable_interrupt()) {
+ if (wilc1000_dev->gpio < 0 &&
+ wilc1000_dev->ops->enable_interrupt &&
+ wilc1000_dev->ops->enable_interrupt(wilc1000_dev)) {
PRINT_ER("couldn't initialize IRQ\n");
ret = -EIO;
goto _fail_irq_init_;
@@ -1039,8 +1041,9 @@ _fail_fw_start_:
wilc_wlan_stop();
_fail_irq_enable_:
- if (wilc1000_dev->gpio < 0)
- wilc1000_sdio_disable_interrupt();
+ if (wilc1000_dev->gpio < 0 &&
+ wilc1000_dev->ops->disable_interrupt)
+ wilc1000_dev->ops->disable_interrupt(wilc1000_dev);
_fail_irq_init_:
if (wilc1000_dev->gpio >= 0)
deinit_irq(wilc1000_dev);
@@ -1,5 +1,4 @@
#include "wilc_wfi_netdevice.h"
-#include "linux_wlan_sdio.h"
#include "wilc_wfi_netdevice.h"
#include <linux/mmc/sdio_func.h>
@@ -160,7 +159,7 @@ static int repeat_power_cycle(perInterface_wlan_t *nic)
wilc1000_dev->mac_status = WILC_MAC_STATUS_INIT;
if (wilc1000_dev->gpio < 0)
- wilc1000_sdio_enable_interrupt();
+ wilc1000_dev->ops->enable_interrupt(wilc1000_dev);
if (wilc1000_wlan_get_firmware(nic)) {
PRINT_ER("Can't get firmware\n");
@@ -232,13 +231,14 @@ static struct sdio_driver wilc_bus = {
.remove = linux_sdio_remove,
};
-int wilc1000_sdio_enable_interrupt(void)
+static int wilc1000_sdio_enable_interrupt(struct wilc *dev)
{
+ struct sdio_func *func = container_of(dev->dev, struct sdio_func, dev);
int ret = 0;
- sdio_claim_host(wilc1000_sdio_func);
- ret = sdio_claim_irq(wilc1000_sdio_func, wilc_sdio_interrupt);
- sdio_release_host(wilc1000_sdio_func);
+ sdio_claim_host(func);
+ ret = sdio_claim_irq(func, wilc_sdio_interrupt);
+ sdio_release_host(func);
if (ret < 0) {
PRINT_ER("can't claim sdio_irq, err(%d)\n", ret);
@@ -247,18 +247,19 @@ int wilc1000_sdio_enable_interrupt(void)
return ret;
}
-void wilc1000_sdio_disable_interrupt(void)
+static void wilc1000_sdio_disable_interrupt(struct wilc *dev)
{
+ struct sdio_func *func = container_of(dev->dev, struct sdio_func, dev);
int ret;
PRINT_D(INIT_DBG, "wilc1000_sdio_disable_interrupt IN\n");
- sdio_claim_host(wilc1000_sdio_func);
- ret = sdio_release_irq(wilc1000_sdio_func);
+ sdio_claim_host(func);
+ ret = sdio_release_irq(func);
if (ret < 0) {
PRINT_ER("can't release sdio_irq, err(%d)\n", ret);
}
- sdio_release_host(wilc1000_sdio_func);
+ sdio_release_host(func);
PRINT_D(INIT_DBG, "wilc1000_sdio_disable_interrupt OUT\n");
}
@@ -325,6 +326,8 @@ static const struct wilc1000_ops wilc1000_sdio_ops = {
.repeat_power_cycle = repeat_power_cycle,
.prepare_11b_core = wilc1000_prepare_11b_core,
#endif
+ .enable_interrupt = wilc1000_sdio_enable_interrupt,
+ .disable_interrupt = wilc1000_sdio_disable_interrupt,
.u.sdio.sdio_cmd52 = wilc1000_sdio_cmd52,
.u.sdio.sdio_cmd53 = wilc1000_sdio_cmd53,
.u.sdio.sdio_set_max_speed = wilc1000_sdio_set_max_speed,
deleted file mode 100644
@@ -1,5 +0,0 @@
-#include <linux/mmc/sdio_func.h>
-
-int wilc1000_sdio_enable_interrupt(void);
-void wilc1000_sdio_disable_interrupt(void);
-
@@ -79,6 +79,8 @@ struct wilc1000_ops {
void (*io_deinit)(void *);
int (*repeat_power_cycle)(struct wilc_per_interface *nic);
u8 (*prepare_11b_core)(struct wilc *nic);
+ int (*enable_interrupt)(struct wilc *nic);
+ void (*disable_interrupt)(struct wilc *nic);
union {
struct {
As a preparation for turning the SDIO side of wilc1000 into a separate module, this removes the last direct caller from the core module into the sdio specific portion. All calls to wilc1000_sdio_enable_interrupt() and wilc1000_sdio_disable_interrupt() now go through a function pointer in wilc1000_ops. We also change arguments slightly to pass the device, as we are already touching those lines and the change will be needed later to remove the global variables. The linux_wlan_sdio.h file is now unused and gets deleted. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- drivers/staging/wilc1000/linux_wlan.c | 21 ++++++++++++--------- drivers/staging/wilc1000/linux_wlan_sdio.c | 23 +++++++++++++---------- drivers/staging/wilc1000/linux_wlan_sdio.h | 5 ----- drivers/staging/wilc1000/wilc_wlan_if.h | 2 ++ 4 files changed, 27 insertions(+), 24 deletions(-) delete mode 100644 drivers/staging/wilc1000/linux_wlan_sdio.h