@@ -306,6 +306,7 @@ typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t;
* is supported.
* @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
* @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan
+ * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement
*
* @NUM_IWL_UCODE_TLV_CAPA: number of bits used
*/
@@ -330,6 +331,7 @@ enum iwl_ucode_tlv_capa {
IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = (__force iwl_ucode_tlv_capa_t)29,
IWL_UCODE_TLV_CAPA_BT_COEX_RRC = (__force iwl_ucode_tlv_capa_t)30,
IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)31,
+ IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE = (__force iwl_ucode_tlv_capa_t)64,
NUM_IWL_UCODE_TLV_CAPA
#ifdef __CHECKER__
@@ -1524,6 +1524,69 @@ struct iwl_dts_measurement_cmd {
} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */
/**
+* enum iwl_dts_control_measurement_mode - DTS measurement type
+* @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read
+* back (latest value. Not waiting for new value). Use automatic
+* SW DTS configuration.
+* @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings,
+* trigger DTS reading and provide read back temperature read
+* when available.
+* @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read
+* @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result,
+* without measurement trigger.
+*/
+enum iwl_dts_control_measurement_mode {
+ DTS_AUTOMATIC = 0,
+ DTS_REQUEST_READ = 1,
+ DTS_OVER_WRITE = 2,
+ DTS_DIRECT_WITHOUT_MEASURE = 3,
+};
+
+/**
+* enum iwl_dts_used - DTS to use or used for measurement in the DTS request
+* @DTS_USE_TOP: Top
+* @DTS_USE_CHAIN_A: chain A
+* @DTS_USE_CHAIN_B: chain B
+* @DTS_USE_CHAIN_C: chain C
+* @XTAL_TEMPERATURE - read temperature from xtal
+*/
+enum iwl_dts_used {
+ DTS_USE_TOP = 0,
+ DTS_USE_CHAIN_A = 1,
+ DTS_USE_CHAIN_B = 2,
+ DTS_USE_CHAIN_C = 3,
+ XTAL_TEMPERATURE = 4,
+};
+
+/**
+* enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode
+* @DTS_BIT6_MODE: bit 6 mode
+* @DTS_BIT8_MODE: bit 8 mode
+*/
+enum iwl_dts_bit_mode {
+ DTS_BIT6_MODE = 0,
+ DTS_BIT8_MODE = 1,
+};
+
+/**
+ * iwl_ext_dts_measurement_cmd - request extended DTS temperature measurements
+ * @control_mode: see &enum iwl_dts_control_measurement_mode
+ * @temperature: used when over write DTS mode is selected
+ * @sensor: set temperature sensor to use. See &enum iwl_dts_used
+ * @avg_factor: average factor to DTS in request DTS read mode
+ * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode
+ * @step_duration: step duration for the DTS
+ */
+struct iwl_ext_dts_measurement_cmd {
+ __le32 control_mode;
+ __le32 temperature;
+ __le32 sensor;
+ __le32 avg_factor;
+ __le32 bit_mode;
+ __le32 step_duration;
+} __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */
+
+/**
* iwl_dts_measurement_notif - notification received with the measurements
*
* @temp: the measured temperature
@@ -176,6 +176,9 @@ static int iwl_mvm_get_temp_cmd(struct iwl_mvm *mvm)
struct iwl_dts_measurement_cmd cmd = {
.flags = cpu_to_le32(DTS_TRIGGER_CMD_FLAGS_TEMP),
};
+ struct iwl_ext_dts_measurement_cmd extcmd = {
+ .control_mode = cpu_to_le32(DTS_AUTOMATIC),
+ };
u32 cmdid;
if (fw_has_api(&mvm->fw->ucode_capa, IWL_UCODE_TLV_API_WIDE_CMD_HDR))
@@ -183,8 +186,12 @@ static int iwl_mvm_get_temp_cmd(struct iwl_mvm *mvm)
PHY_OPS_GROUP, 0);
else
cmdid = CMD_DTS_MEASUREMENT_TRIGGER;
- return iwl_mvm_send_cmd_pdu(mvm, cmdid, 0,
- sizeof(cmd), &cmd);
+
+ if (!fw_has_capa(&mvm->fw->ucode_capa,
+ IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE))
+ return iwl_mvm_send_cmd_pdu(mvm, cmdid, 0, sizeof(cmd), &cmd);
+
+ return iwl_mvm_send_cmd_pdu(mvm, cmdid, 0, sizeof(extcmd), &extcmd);
}
int iwl_mvm_get_temp(struct iwl_mvm *mvm)