@@ -568,7 +568,7 @@ struct wireless_dev *brcmf_ap_add_vif(struct wiphy *wiphy, const char *name,
/* wait for firmware event */
err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_ADD,
- msecs_to_jiffies(1500));
+ BRCMF_VIF_EVENT_TIMEOUT);
brcmf_cfg80211_arm_vif_event(cfg, NULL);
if (!err) {
brcmf_err("timeout occurred\n");
@@ -75,6 +75,8 @@
#define BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_ON 2
#define BRCMF_DEFAULT_BCN_TIMEOUT_ROAM_OFF 4
+#define BRCMF_VIF_EVENT_TIMEOUT msecs_to_jiffies(1500)
+
/**
* enum brcmf_scan_status - scan engine status
*
@@ -40,7 +40,7 @@ MODULE_AUTHOR("Broadcom Corporation");
MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
MODULE_LICENSE("Dual BSD/GPL");
-#define MAX_WAIT_FOR_8021X_TX 50 /* msecs */
+#define MAX_WAIT_FOR_8021X_TX msecs_to_jiffies(50)
/* AMPDU rx reordering definitions */
#define BRCMF_RXREORDER_FLOWID_OFFSET 0
@@ -1282,7 +1282,7 @@ int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp)
err = wait_event_timeout(ifp->pend_8021x_wait,
!brcmf_get_pend_8021x_cnt(ifp),
- msecs_to_jiffies(MAX_WAIT_FOR_8021X_TX));
+ MAX_WAIT_FOR_8021X_TX);
WARN_ON(!err);
@@ -34,7 +34,7 @@
#include "tracepoint.h"
-#define MSGBUF_IOCTL_RESP_TIMEOUT 2000
+#define MSGBUF_IOCTL_RESP_TIMEOUT msecs_to_jiffies(2000)
#define MSGBUF_TYPE_GEN_STATUS 0x1
#define MSGBUF_TYPE_RING_STATUS 0x2
@@ -466,7 +466,7 @@ static int brcmf_msgbuf_ioctl_resp_wait(struct brcmf_msgbuf *msgbuf)
{
return wait_event_timeout(msgbuf->ioctl_resp_wait,
msgbuf->ctl_completed,
- msecs_to_jiffies(MSGBUF_IOCTL_RESP_TIMEOUT));
+ MSGBUF_IOCTL_RESP_TIMEOUT);
}
@@ -71,10 +71,10 @@
#define P2P_AF_MED_DWELL_TIME 400
#define P2P_AF_LONG_DWELL_TIME 1000
#define P2P_AF_TX_MAX_RETRY 1
-#define P2P_AF_MAX_WAIT_TIME 2000
+#define P2P_AF_MAX_WAIT_TIME msecs_to_jiffies(2000)
#define P2P_INVALID_CHANNEL -1
#define P2P_CHANNEL_SYNC_RETRY 5
-#define P2P_AF_FRM_SCAN_MAX_WAIT 1500
+#define P2P_AF_FRM_SCAN_MAX_WAIT msecs_to_jiffies(1500)
#define P2P_DEFAULT_SLEEP_TIME_VSDB 200
/* WiFi P2P Public Action Frame OUI Subtypes */
@@ -102,6 +102,7 @@
#define P2PSD_ACTION_ID_GAS_CREQ 0x0c /* GAS Comback Request AF */
#define P2PSD_ACTION_ID_GAS_CRESP 0x0d /* GAS Comback Response AF */
+#define BRCMF_P2P_DISABLE_TIMEOUT msecs_to_jiffies(500)
/**
* struct brcmf_p2p_disc_st_le - set discovery state in firmware.
*
@@ -1514,7 +1515,7 @@ static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p,
p2p->af_tx_sent_jiffies = jiffies;
timeout = wait_for_completion_timeout(&p2p->send_af_done,
- msecs_to_jiffies(P2P_AF_MAX_WAIT_TIME));
+ P2P_AF_MAX_WAIT_TIME);
if (test_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED, &p2p->status)) {
brcmf_dbg(TRACE, "TX action frame operation is success\n");
@@ -1988,7 +1989,7 @@ int brcmf_p2p_ifchange(struct brcmf_cfg80211_info *cfg,
return err;
}
err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_CHANGE,
- msecs_to_jiffies(1500));
+ BRCMF_VIF_EVENT_TIMEOUT);
brcmf_cfg80211_arm_vif_event(cfg, NULL);
if (!err) {
brcmf_err("No BRCMF_E_IF_CHANGE event received\n");
@@ -2090,7 +2091,7 @@ static struct wireless_dev *brcmf_p2p_create_p2pdev(struct brcmf_p2p_info *p2p,
/* wait for firmware event */
err = brcmf_cfg80211_wait_vif_event_timeout(p2p->cfg, BRCMF_E_IF_ADD,
- msecs_to_jiffies(1500));
+ BRCMF_VIF_EVENT_TIMEOUT);
brcmf_cfg80211_arm_vif_event(p2p->cfg, NULL);
brcmf_fweh_p2pdev_setup(pri_ifp, false);
if (!err) {
@@ -2180,7 +2181,7 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
/* wait for firmware event */
err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_ADD,
- msecs_to_jiffies(1500));
+ BRCMF_VIF_EVENT_TIMEOUT);
brcmf_cfg80211_arm_vif_event(cfg, NULL);
if (!err) {
brcmf_err("timeout occurred\n");
@@ -2230,7 +2231,6 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev)
struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
struct brcmf_p2p_info *p2p = &cfg->p2p;
struct brcmf_cfg80211_vif *vif;
- unsigned long jiffie_timeout = msecs_to_jiffies(1500);
bool wait_for_disable = false;
int err;
@@ -2263,7 +2263,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev)
if (wait_for_disable)
wait_for_completion_timeout(&cfg->vif_disabled,
- msecs_to_jiffies(500));
+ BRCMF_P2P_DISABLE_TIMEOUT);
err = 0;
if (vif->wdev.iftype != NL80211_IFTYPE_P2P_DEVICE) {
@@ -2273,7 +2273,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev)
if (!err) {
/* wait for firmware event */
err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL,
- jiffie_timeout);
+ BRCMF_VIF_EVENT_TIMEOUT);
if (!err)
err = -EIO;
else
@@ -191,7 +191,7 @@ static struct brcmf_firmware_mapping brcmf_pcie_fwnames[] = {
#define BRCMF_H2D_HOST_D0_INFORM_IN_USE 0x00000008
#define BRCMF_H2D_HOST_D0_INFORM 0x00000010
-#define BRCMF_PCIE_MBDATA_TIMEOUT 2000
+#define BRCMF_PCIE_MBDATA_TIMEOUT msecs_to_jiffies(2000)
#define BRCMF_PCIE_CFGREG_STATUS_CMD 0x4
#define BRCMF_PCIE_CFGREG_PM_CSR 0x4C
@@ -1885,9 +1885,8 @@ static int brcmf_pcie_pm_enter_D3(struct device *dev)
devinfo->mbdata_completed = false;
brcmf_pcie_send_mb_data(devinfo, BRCMF_H2D_HOST_D3_INFORM);
- wait_event_timeout(devinfo->mbdata_resp_wait,
- devinfo->mbdata_completed,
- msecs_to_jiffies(BRCMF_PCIE_MBDATA_TIMEOUT));
+ wait_event_timeout(devinfo->mbdata_resp_wait, devinfo->mbdata_completed,
+ BRCMF_PCIE_MBDATA_TIMEOUT);
if (!devinfo->mbdata_completed) {
brcmf_err("Timeout on response for entering D3 substate\n");
return -EIO;
@@ -45,8 +45,8 @@
#include "chip.h"
#include "firmware.h"
-#define DCMD_RESP_TIMEOUT 2000 /* In milli second */
-#define CTL_DONE_TIMEOUT 2000 /* In milli second */
+#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2000)
+#define CTL_DONE_TIMEOUT msecs_to_jiffies(2000)
#ifdef DEBUG
@@ -1657,7 +1657,7 @@ static int brcmf_sdio_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition,
bool *pending)
{
DECLARE_WAITQUEUE(wait, current);
- int timeout = msecs_to_jiffies(DCMD_RESP_TIMEOUT);
+ int timeout = DCMD_RESP_TIMEOUT;
/* Wait until control frame is available */
add_wait_queue(&bus->dcmd_resp_wait, &wait);
@@ -2842,7 +2842,7 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
brcmf_sdio_trigger_dpc(bus);
wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat,
- msecs_to_jiffies(CTL_DONE_TIMEOUT));
+ CTL_DONE_TIMEOUT);
ret = 0;
if (bus->ctrl_frame_stat) {
sdio_claim_host(bus->sdiodev->func[1]);
@@ -3552,7 +3552,7 @@ static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
/* Poll for console output periodically */
if (bus->sdiodev->state == BRCMF_SDIOD_DATA && BRCMF_FWCON_ON() &&
bus->console_interval != 0) {
- bus->console.count += BRCMF_WD_POLL_MS;
+ bus->console.count += jiffies_to_msecs(BRCMF_WD_POLL);
if (bus->console.count >= bus->console_interval) {
bus->console.count -= bus->console_interval;
sdio_claim_host(bus->sdiodev->func[1]);
@@ -3909,7 +3909,7 @@ brcmf_sdio_watchdog(unsigned long data)
/* Reschedule the watchdog */
if (bus->wd_active)
mod_timer(&bus->timer,
- jiffies + msecs_to_jiffies(BRCMF_WD_POLL_MS));
+ jiffies + BRCMF_WD_POLL);
}
}
@@ -4234,14 +4234,12 @@ void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, bool active)
/* Create timer again when watchdog period is
dynamically changed or in the first instance
*/
- bus->timer.expires =
- jiffies + msecs_to_jiffies(BRCMF_WD_POLL_MS);
+ bus->timer.expires = jiffies + BRCMF_WD_POLL;
add_timer(&bus->timer);
bus->wd_active = true;
} else {
/* Re arm the timer, at last watchdog period */
- mod_timer(&bus->timer,
- jiffies + msecs_to_jiffies(BRCMF_WD_POLL_MS));
+ mod_timer(&bus->timer, jiffies + BRCMF_WD_POLL);
}
}
}
@@ -152,8 +152,8 @@
/* Packet alignment for most efficient SDIO (can change based on platform) */
#define BRCMF_SDALIGN (1 << 6)
-/* watchdog polling interval in ms */
-#define BRCMF_WD_POLL_MS 10
+/* watchdog polling interval */
+#define BRCMF_WD_POLL msecs_to_jiffies(10)
/**
* enum brcmf_sdiod_state - the state of the bus.
@@ -29,7 +29,7 @@
#include "usb.h"
-#define IOCTL_RESP_TIMEOUT 2000
+#define IOCTL_RESP_TIMEOUT msecs_to_jiffies(2000)
#define BRCMF_USB_RESET_GETVER_SPINWAIT 100 /* in unit of ms */
#define BRCMF_USB_RESET_GETVER_LOOP_CNT 10
@@ -190,8 +190,7 @@ static struct brcmf_usbdev_info *brcmf_usb_get_businfo(struct device *dev)
static int brcmf_usb_ioctl_resp_wait(struct brcmf_usbdev_info *devinfo)
{
return wait_event_timeout(devinfo->ioctl_resp_wait,
- devinfo->ctl_completed,
- msecs_to_jiffies(IOCTL_RESP_TIMEOUT));
+ devinfo->ctl_completed, IOCTL_RESP_TIMEOUT);
}
static void brcmf_usb_ioctl_resp_wake(struct brcmf_usbdev_info *devinfo)