diff mbox

[11/13] ath9k: enable manual peak cal for all ar9300 chips

Message ID 1456474123-10520-12-git-send-email-miaoqing@codeaurora.org (mailing list archive)
State Accepted
Delegated to: Kalle Valo
Headers show

Commit Message

Miaoqing Pan Feb. 26, 2016, 8:08 a.m. UTC 
From: Miaoqing Pan <miaoqing@codeaurora.org>

HW peak detect calibration would fail, enable all ar9300
chips manual peak calibration instead.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 0c39199..99bc1a6 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1641,14 +1641,12 @@  static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
 
 skip_tx_iqcal:
 	if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) {
-		if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah) ||
-		    AR_SREV_9561(ah)) {
-			for (i = 0; i < AR9300_MAX_CHAINS; i++) {
-				if (!(ah->rxchainmask & (1 << i)))
-					continue;
-				ar9003_hw_manual_peak_cal(ah, i,
-							  IS_CHAN_2GHZ(chan));
-			}
+		for (i = 0; i < AR9300_MAX_CHAINS; i++) {
+			if (!(ah->rxchainmask & (1 << i)))
+				continue;
+
+			ar9003_hw_manual_peak_cal(ah, i,
+						  IS_CHAN_2GHZ(chan));
 		}
 
 		/*