| Message ID | 1460982143-1419-1-git-send-email-akarwar@marvell.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Kalle Valo |
| Headers | show |
On Mon, Apr 18, 2016 at 05:22:22AM -0700, Amitkumar Karwar wrote: > From: Xinming Hu <huxm@marvell.com> > > Add device tree binding documentation for MARVELL's sd8xxx > (sd8897 and sd8997) wlan chip. > > Signed-off-by: Xinming Hu <huxm@marvell.com> > Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> > --- > Listing changelist for both 1/2 and 2/2 patches > v3: Don't update adapter->dt_node if mwifiex_plt_dev is NULL > > v4: a)Corrected the 'name' and 'compatible' property names.(Arnd Bergmann and Rob > Herring) > b)Patch description wraped in 72 columns(Rob Herring) > c)Moved DT binding file to bindings/net/wireless/(Rob Herring) > d)Renamed "mwifiex,chip-gpio" to "marvell,wakeup-gpios"(Rob Herring/ > Arnd Bergmann) > e)Replaced #ifdef with __maybe_unused(Arnd Bergmann) > > v5: a)Removed wildcards from compatible string(Arnd Bergmann) > b)Prepared single patch for all binding changes(Rob Herring) > c)Specified our node as a subnode of SDIO controller. With this approach, we > don't need to register new platform driver. (Rob herring) > > v6: a)List out the specific property names for marvell,caldata* and size of the data(Rob Herring) > b)Use sdio function number for both the unit address and reg(Rob Herring) > > v7: a)Use suggested specific marvell,caldata property name and generic node name(Rob Herring) > --- > .../bindings/net/wireless/marvell-sd8xxx.txt | 63 ++++++++++++++++++++++ > 1 file changed, 63 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt Acked-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> From: Xinming Hu <huxm@marvell.com> > > Add device tree binding documentation for MARVELL's sd8xxx > (sd8897 and sd8997) wlan chip. > > Signed-off-by: Xinming Hu <huxm@marvell.com> > Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> > Acked-by: Rob Herring <robh@kernel.org> Thanks, 2 patches applied to wireless-drivers-next.git: 84039920bdff dt: bindings: add MARVELL's sd8xxx wireless device ce4f6f0c353b mwifiex: add platform specific wakeup interrupt support Kalle Valo -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt new file mode 100644 index 0000000..c421aba --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt @@ -0,0 +1,63 @@ +Marvell 8897/8997 (sd8897/sd8997) SDIO devices +------ + +This node provides properties for controlling the marvell sdio wireless device. +The node is expected to be specified as a child node to the SDIO controller that +connects the device to the system. + +Required properties: + + - compatible : should be one of the following: + * "marvell,sd8897" + * "marvell,sd8997" + +Optional properties: + + - marvell,caldata* : A series of properties with marvell,caldata prefix, + represent calibration data downloaded to the device during + initialization. This is an array of unsigned 8-bit values. + the properties should follow below property name and + corresponding array length: + "marvell,caldata-txpwrlimit-2g" (length = 566). + "marvell,caldata-txpwrlimit-5g-sub0" (length = 502). + "marvell,caldata-txpwrlimit-5g-sub1" (length = 688). + "marvell,caldata-txpwrlimit-5g-sub2" (length = 750). + "marvell,caldata-txpwrlimit-5g-sub3" (length = 502). + - marvell,wakeup-pin : a wakeup pin number of wifi chip which will be configured + to firmware. Firmware will wakeup the host using this pin + during suspend/resume. + - interrupt-parent: phandle of the parent interrupt controller + - interrupts : interrupt pin number to the cpu. driver will request an irq based on + this interrupt number. during system suspend, the irq will be enabled + so that the wifi chip can wakeup host platform under certain condition. + during system resume, the irq will be disabled to make sure + unnecessary interrupt is not received. + +Example: + +Tx power limit calibration data is configured in below example. +The calibration data is an array of unsigned values, the length +can vary between hw versions. +IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured +so that firmware can wakeup host using this device side pin. + +&mmc3 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + mwifiex: wifi@1 { + compatible = "marvell,sd8897"; + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + + marvell,caldata_00_txpwrlimit_2g_cfg_set = /bits/ 8 < + 0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01>; + marvell,wakeup-pin = <3>; + }; +};