@@ -4892,6 +4892,68 @@ exit:
return err;
}
+static int brcmf_cfg80211_get_channel(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ struct cfg80211_chan_def *chandef)
+{
+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+ struct net_device *ndev = wdev->netdev;
+ struct brcmf_if *ifp;
+ struct brcmu_chan ch;
+ enum nl80211_band band = 0;
+ enum nl80211_chan_width width = 0;
+ u32 chanspec;
+ int freq, err;
+
+ if (!ndev)
+ return -ENODEV;
+ ifp = netdev_priv(ndev);
+
+ err = brcmf_fil_iovar_int_get(ifp, "chanspec", &chanspec);
+ if (err) {
+ brcmf_err("chanspec failed (%d)\n", err);
+ return err;
+ }
+
+ ch.chspec = chanspec;
+ cfg->d11inf.decchspec(&ch);
+
+ switch (ch.band) {
+ case BRCMU_CHAN_BAND_2G:
+ band = NL80211_BAND_2GHZ;
+ break;
+ case BRCMU_CHAN_BAND_5G:
+ band = NL80211_BAND_5GHZ;
+ break;
+ }
+
+ switch (ch.bw) {
+ case BRCMU_CHAN_BW_80:
+ width = NL80211_CHAN_WIDTH_80;
+ break;
+ case BRCMU_CHAN_BW_40:
+ width = NL80211_CHAN_WIDTH_40;
+ break;
+ case BRCMU_CHAN_BW_20:
+ width = NL80211_CHAN_WIDTH_20;
+ break;
+ case BRCMU_CHAN_BW_80P80:
+ width = NL80211_CHAN_WIDTH_80P80;
+ break;
+ case BRCMU_CHAN_BW_160:
+ width = NL80211_CHAN_WIDTH_160;
+ break;
+ }
+
+ freq = ieee80211_channel_to_frequency(ch.control_ch_num, band);
+ chandef->chan = ieee80211_get_channel(wiphy, freq);
+ chandef->width = width;
+ chandef->center_freq1 = ieee80211_channel_to_frequency(ch.chnum, band);
+ chandef->center_freq2 = 0;
+
+ return 0;
+}
+
static int brcmf_cfg80211_crit_proto_start(struct wiphy *wiphy,
struct wireless_dev *wdev,
enum nl80211_crit_proto_id proto,
@@ -5054,6 +5116,7 @@ static struct cfg80211_ops brcmf_cfg80211_ops = {
.mgmt_tx = brcmf_cfg80211_mgmt_tx,
.remain_on_channel = brcmf_p2p_remain_on_channel,
.cancel_remain_on_channel = brcmf_cfg80211_cancel_remain_on_channel,
+ .get_channel = brcmf_cfg80211_get_channel,
.start_p2p_device = brcmf_p2p_start_device,
.stop_p2p_device = brcmf_p2p_stop_device,
.crit_proto_start = brcmf_cfg80211_crit_proto_start,
This is important for brcmfmac as some of released firmwares (e.g. brcmfmac4366b-pcie.bin) may pick different channel than requested. This has been tested with BCM4366B1 in D-Link DIR-885L. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> --- V2: Check if ndev isn't NULL, update description. --- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 63 ++++++++++++++++++++++ 1 file changed, 63 insertions(+)