diff mbox

[5/8] mwifiex: add memrw command information in README

Message ID 1475066908-11771-5-git-send-email-akarwar@marvell.com (mailing list archive)
State Accepted
Commit a936ea543657d9764947eada7fa42bb570425118
Delegated to: Kalle Valo
Headers show

Commit Message

Amitkumar Karwar Sept. 28, 2016, 12:48 p.m. UTC 
Support for this debugfs command is available in driver. This patch
adds usage information in README file.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
---
 drivers/net/wireless/marvell/mwifiex/README | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
diff mbox

Patch

diff --git a/drivers/net/wireless/marvell/mwifiex/README b/drivers/net/wireless/marvell/mwifiex/README
index 24e649b..588fcbe 100644
--- a/drivers/net/wireless/marvell/mwifiex/README
+++ b/drivers/net/wireless/marvell/mwifiex/README
@@ -180,6 +180,29 @@  regrdwr
 		echo "1 0xa060 0x12" > regrdwr      : Write the MAC register
 		echo "1 0xa794 0x80000000" > regrdwr
 		                                    : Write 0x80000000 to MAC register
+
+memrw
+	This command is used to read/write the firmware memory.
+
+	Usage:
+		1) For reading firmware memory location.
+			echo r <address> 0 > /sys/kernel/debug/mwifiex/mlan0/memrw
+			cat /sys/kernel/debug/mwifiex/mlan0/memrw
+		2) For writing value to firmware memory location.
+			echo w <address> [value] > /sys/kernel/debug/mwifiex/mlan0/memrw
+
+	where the parameters are,
+		<address>:  memory address
+		[value]:    value to be written
+
+	Examples:
+		echo r 0x4cf70 0 > /sys/kernel/debug/mwifiex/mlan0/memrw
+		cat /sys/kernel/debug/mwifiex/mlan0/memrw
+						: Read memory address 0x4cf70
+		iwpriv mlan0 memrdwr -0x7fff6000 -0x40000000
+		echo w 0x8000a000 0xc0000000 > /sys/kernel/debug/mwifiex/mlan0/memrw
+						: Write 0xc0000000 to memory address 0x8000a000
+
 rdeeprom
 	This command is used to read the EEPROM contents of the card.