@@ -1060,6 +1060,82 @@ static int rsi_mac80211_sta_remove(struct ieee80211_hw *hw,
return 0;
}
+/**
+ * rsi_mac80211_set_antenna() - This function is used to configure
+ * tx and rx antennas.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @tx_ant: Bitmap for tx antenna
+ * @rx_ant: Bitmap for rx antenna
+ *
+ * Return: 0 on success, Negative error code on failure.
+ */
+static int rsi_mac80211_set_antenna(struct ieee80211_hw *hw,
+ u32 tx_ant, u32 rx_ant)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+ u8 antenna = 0;
+
+ if (tx_ant > 1 || rx_ant > 1) {
+ rsi_dbg(ERR_ZONE,
+ "Invalid antenna selection (tx: %d, rx:%d)\n",
+ tx_ant, rx_ant);
+ rsi_dbg(ERR_ZONE,
+ "Use 0 for int_ant, 1 for ext_ant\n");
+ return -EINVAL;
+ }
+
+ rsi_dbg(INFO_ZONE, "%s: Antenna map Tx %x Rx %d\n",
+ __func__, tx_ant, rx_ant);
+
+ mutex_lock(&common->mutex);
+
+ antenna = tx_ant ? ANTENNA_SEL_UFL : ANTENNA_SEL_INT;
+ if (common->ant_in_use != antenna)
+ if (rsi_set_antenna(common, antenna))
+ goto fail_set_antenna;
+
+ rsi_dbg(INFO_ZONE, "(%s) Antenna path configured successfully\n",
+ tx_ant ? "UFL" : "INT");
+
+ common->ant_in_use = antenna;
+
+ mutex_unlock(&common->mutex);
+
+ return 0;
+
+fail_set_antenna:
+ rsi_dbg(ERR_ZONE, "%s: Failed.\n", __func__);
+ mutex_unlock(&common->mutex);
+ return -EINVAL;
+}
+
+/**
+ * rsi_mac80211_get_antenna() - This function is used to configure
+ * tx and rx antennas.
+ *
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @tx_ant: Bitmap for tx antenna
+ * @rx_ant: Bitmap for rx antenna
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_mac80211_get_antenna(struct ieee80211_hw *hw,
+ u32 *tx_ant, u32 *rx_ant)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+
+ mutex_lock(&common->mutex);
+
+ *tx_ant = (common->ant_in_use == ANTENNA_SEL_UFL) ? 1 : 0;
+ *rx_ant = 0;
+
+ mutex_unlock(&common->mutex);
+
+ return 0;
+}
+
static struct ieee80211_ops mac80211_ops = {
.tx = rsi_mac80211_tx,
.start = rsi_mac80211_start,
@@ -1076,6 +1152,8 @@ static struct ieee80211_ops mac80211_ops = {
.ampdu_action = rsi_mac80211_ampdu_action,
.sta_add = rsi_mac80211_sta_add,
.sta_remove = rsi_mac80211_sta_remove,
+ .set_antenna = rsi_mac80211_set_antenna,
+ .get_antenna = rsi_mac80211_get_antenna,
};
/**
@@ -1312,6 +1312,39 @@ int rsi_send_rx_filter_frame(struct rsi_common *common, u16 rx_filter_word)
}
/**
+ * rsi_set_antenna() - This fuction send antenna configuration request
+ * to device
+ *
+ * @common: Pointer to the driver private structure.
+ * @antenna: bitmap for tx antenna selection
+ *
+ * Return: 0 on Success, negative error code on failure
+ */
+int rsi_set_antenna(struct rsi_common *common, u8 antenna)
+{
+ struct rsi_mac_frame *cmd_frame;
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(FRAME_DESC_SZ);
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ cmd_frame = (struct rsi_mac_frame *)skb->data;
+
+ cmd_frame->desc_word[1] = cpu_to_le16(ANT_SEL_FRAME);
+ cmd_frame->desc_word[3] = cpu_to_le16(antenna & 0x00ff);
+ cmd_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+
+ skb_put(skb, FRAME_DESC_SZ);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
* rsi_handle_ta_confirm_type() - This function handles the confirm frames.
* @common: Pointer to the driver private structure.
* @msg: Pointer to received packet.
@@ -206,6 +206,7 @@ struct rsi_common {
bool hw_data_qs_blocked;
int tx_power;
+ u8 ant_in_use;
};
struct rsi_hw {
@@ -141,6 +141,9 @@
#define RSI_SUPP_FILTERS (FIF_ALLMULTI | FIF_PROBE_REQ |\
FIF_BCN_PRBRESP_PROMISC)
+#define ANTENNA_SEL_INT 0x02 /* RF_OUT_2 / Integerated */
+#define ANTENNA_SEL_UFL 0x03 /* RF_OUT_1 / U.FL */
+
/* Rx filter word definitions */
#define PROMISCOUS_MODE BIT(0)
#define ALLOW_DATA_ASSOC_PEER BIT(1)
@@ -195,6 +198,7 @@ enum cmd_frame_type {
BG_SCAN_PROBE_REQ,
CW_MODE_REQ,
PER_CMD_PKT,
+ ANT_SEL_FRAME = 0x20,
RADIO_PARAMS_UPDATE = 0x29
};
@@ -319,4 +323,5 @@ int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb);
int rsi_band_check(struct rsi_common *common);
int rsi_send_rx_filter_frame(struct rsi_common *common, u16 rx_filter_word);
int rsi_send_radio_params_update(struct rsi_common *common);
+int rsi_set_antenna(struct rsi_common *common, u8 antenna);
#endif
RSI 9113 device supports single antenna for tx and rx. Support for using external is added. This can be configured from user space using iw. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> --- drivers/net/wireless/rsi/rsi_91x_mac80211.c | 78 +++++++++++++++++++++++++++++ drivers/net/wireless/rsi/rsi_91x_mgmt.c | 33 ++++++++++++ drivers/net/wireless/rsi/rsi_main.h | 1 + drivers/net/wireless/rsi/rsi_mgmt.h | 5 ++ 4 files changed, 117 insertions(+)