diff mbox

[2/2] mwifiex: Enable dynamic bandwidth signalling

Message ID 1481873145-5381-2-git-send-email-akarwar@marvell.com (mailing list archive)
State Accepted
Commit d7864cf2123503b83880d4b8d5786cb5641d64d8
Delegated to: Kalle Valo
Headers show

Commit Message

Amitkumar Karwar Dec. 16, 2016, 7:25 a.m. UTC 
Enable dynamic bandwidth signalling by setting the corresponding
bit in MAC control register.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
---
 drivers/net/wireless/marvell/mwifiex/fw.h   | 1 +
 drivers/net/wireless/marvell/mwifiex/init.c | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h
index f48247c..55db158f 100644
--- a/drivers/net/wireless/marvell/mwifiex/fw.h
+++ b/drivers/net/wireless/marvell/mwifiex/fw.h
@@ -441,6 +441,7 @@  enum mwifiex_channel_flags {
 #define HostCmd_ACT_MAC_PROMISCUOUS_ENABLE    BIT(7)
 #define HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE  BIT(8)
 #define HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON BIT(13)
+#define HostCmd_ACT_MAC_DYNAMIC_BW_ENABLE     BIT(16)
 
 #define HostCmd_BSS_MODE_IBSS               0x0002
 #define HostCmd_BSS_MODE_ANY                0x0003
diff --git a/drivers/net/wireless/marvell/mwifiex/init.c b/drivers/net/wireless/marvell/mwifiex/init.c
index 87cda4f..7569483 100644
--- a/drivers/net/wireless/marvell/mwifiex/init.c
+++ b/drivers/net/wireless/marvell/mwifiex/init.c
@@ -92,7 +92,8 @@  int mwifiex_init_priv(struct mwifiex_private *priv)
 	for (i = 0; i < ARRAY_SIZE(priv->wep_key); i++)
 		memset(&priv->wep_key[i], 0, sizeof(struct mwifiex_wep_key));
 	priv->wep_key_curr_index = 0;
-	priv->curr_pkt_filter = HostCmd_ACT_MAC_RX_ON | HostCmd_ACT_MAC_TX_ON |
+	priv->curr_pkt_filter = HostCmd_ACT_MAC_DYNAMIC_BW_ENABLE |
+				HostCmd_ACT_MAC_RX_ON | HostCmd_ACT_MAC_TX_ON |
 				HostCmd_ACT_MAC_ETHERNETII_ENABLE;
 
 	priv->beacon_period = 100; /* beacon interval */