diff mbox

[v2,09/10] rt2800: use TXOP_BACKOFF for probe frames

Message ID 1487150713-3510-10-git-send-email-sgruszka@redhat.com (mailing list archive)
State Accepted
Commit fb47ada8dc3c30c8e7b415da155742b49536c61e
Delegated to: Kalle Valo
Headers show

Commit Message

Stanislaw Gruszka Feb. 15, 2017, 9:25 a.m. UTC
Even if we do not set AMPDU bit in TXWI, device still can aggregate
frame and send it with rate not corresponding to requested. That mean
we can do not sent probe frames with requested rate. To prevent that
use TXOP_BACKOFF for probe frames.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
index e1660b9..a2c1ca5 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
@@ -372,15 +372,16 @@  static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev,
 
 	/*
 	 * Determine IFS values
-	 * - Use TXOP_BACKOFF for management frames except beacons
+	 * - Use TXOP_BACKOFF for probe and management frames except beacons
 	 * - Use TXOP_SIFS for fragment bursts
 	 * - Use TXOP_HTTXOP for everything else
 	 *
 	 * Note: rt2800 devices won't use CTS protection (if used)
 	 * for frames not transmitted with TXOP_HTTXOP
 	 */
-	if (ieee80211_is_mgmt(hdr->frame_control) &&
-	    !ieee80211_is_beacon(hdr->frame_control))
+	if ((ieee80211_is_mgmt(hdr->frame_control) &&
+	     !ieee80211_is_beacon(hdr->frame_control)) ||
+	    (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE))
 		txdesc->u.ht.txop = TXOP_BACKOFF;
 	else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT))
 		txdesc->u.ht.txop = TXOP_SIFS;