@@ -378,4 +378,15 @@ config BT_QCOMSMD
Say Y here to compile support for HCI over Qualcomm SMD into the
kernel or say M to compile as a module.
+config BT_RSI
+ tristate "Redpine HCI support"
+ default m
+ help
+ Redpine BT driver.
+ This driver handles BT traffic from upper layers and pass
+ to the RSI_91x coex module for further scheduling to device
+
+ Say Y here to compile support for HCI over Redpine into the
+ kernel or say M to compile as a module.
+
endmenu
@@ -28,6 +28,8 @@ obj-$(CONFIG_BT_QCA) += btqca.o
obj-$(CONFIG_BT_HCIUART_NOKIA) += hci_nokia.o
+obj-$(CONFIG_BT_RSI) += btrsi.o
+
btmrvl-y := btmrvl_main.o
btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o
new file mode 100644
@@ -0,0 +1,216 @@
+/**
+ * Copyright (c) 2017 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+e* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "rsi_hci.h"
+
+struct rsi_hci_adapter {
+ void *priv;
+ struct rsi_proto_ops *proto_ops;
+ struct hci_dev *hdev;
+};
+
+static struct rsi_mod_ops rsi_bt_ops = {
+ .attach = rsi_hci_attach,
+ .detach = rsi_hci_detach,
+ .recv_pkt = rsi_hci_recv_pkt,
+};
+
+static int rsi_hci_open(struct hci_dev *hdev)
+{
+ return 0;
+}
+
+static int rsi_hci_close(struct hci_dev *hdev)
+{
+ return 0;
+}
+
+static int rsi_hci_flush(struct hci_dev *hdev)
+{
+ return 0;
+}
+
+static int rsi_hci_send_pkt(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct rsi_hci_adapter *h_adapter = hci_get_drvdata(hdev);
+ struct sk_buff *new_skb = NULL;
+
+ switch (bt_cb(skb)->pkt_type) {
+ case HCI_COMMAND_PKT:
+ hdev->stat.cmd_tx++;
+ break;
+
+ case HCI_ACLDATA_PKT:
+ hdev->stat.acl_tx++;
+ break;
+
+ case HCI_SCODATA_PKT:
+ hdev->stat.sco_tx++;
+ break;
+ }
+
+ if (skb_headroom(skb) < RSI_HEADROOM_FOR_BT_HAL) {
+ /* Insufficient skb headroom - allocate a new skb */
+ new_skb = skb_realloc_headroom(skb, RSI_HEADROOM_FOR_BT_HAL);
+ if (unlikely(!new_skb))
+ return -ENOMEM;
+ bt_cb(new_skb)->pkt_type = bt_cb(skb)->pkt_type;
+ kfree_skb(skb);
+ skb = new_skb;
+ }
+
+ return h_adapter->proto_ops->coex_send_pkt(h_adapter->priv, skb,
+ RSI_BT_Q);
+}
+
+int rsi_hci_recv_pkt(void *priv, u8 *pkt)
+{
+ struct rsi_hci_adapter *h_adapter = (struct rsi_hci_adapter *)priv;
+ struct hci_dev *hdev = h_adapter->hdev;
+ struct sk_buff *skb;
+
+ int pkt_len = get_unaligned_le16(pkt) & 0x0fff;
+ u8 queue_no = (get_unaligned_le16(pkt) & 0x7000) >> 12;
+
+ if (queue_no == RSI_BT_MGMT_Q) {
+ u8 msg_type = pkt[14] & 0xFF;
+
+ switch (msg_type) {
+ case RSI_RESULT_CONFIRM:
+ bt_dev_info(hdev, "BT Result Confirm");
+ return 0;
+ case RSI_BT_BER:
+ bt_dev_info(hdev, "BT Ber");
+ return 0;
+ case RSI_BT_CW:
+ bt_dev_info(hdev, "BT CW");
+ return 0;
+ default:
+ break;
+ }
+ }
+
+ skb = dev_alloc_skb(pkt_len);
+ if (!skb)
+ return -ENOMEM;
+
+ memcpy(skb->data, pkt + RSI_FRAME_DESC_SIZE, pkt_len);
+ skb_put(skb, pkt_len);
+ h_adapter->hdev->stat.byte_rx += skb->len;
+
+ skb->dev = (void *)hdev;
+ bt_cb(skb)->pkt_type = pkt[14];
+
+ return hci_recv_frame(hdev, skb);
+}
+
+int rsi_hci_attach(void *priv, struct rsi_proto_ops *ops)
+{
+ struct rsi_hci_adapter *h_adapter = NULL;
+ struct hci_dev *hdev;
+ int status = 0;
+
+ h_adapter = kzalloc(sizeof(*h_adapter), GFP_KERNEL);
+ if (!h_adapter)
+ return -ENOMEM;
+
+ h_adapter->priv = priv;
+ ops->set_bt_context(priv, h_adapter);
+ h_adapter->proto_ops = ops;
+
+ hdev = hci_alloc_dev();
+ if (!hdev) {
+ BT_ERR("Failed to alloc HCI device\n");
+ goto err;
+ }
+
+ h_adapter->hdev = hdev;
+
+ if (ops->get_host_intf(priv) == RSI_HOST_INTF_SDIO)
+ hdev->bus = HCI_SDIO;
+ else
+ hdev->bus = HCI_USB;
+
+ hci_set_drvdata(hdev, h_adapter);
+ hdev->dev_type = HCI_PRIMARY;
+ hdev->open = rsi_hci_open;
+ hdev->close = rsi_hci_close;
+ hdev->flush = rsi_hci_flush;
+ hdev->send = rsi_hci_send_pkt;
+
+ status = hci_register_dev(hdev);
+ if (status < 0) {
+ BT_ERR("%s: HCI registration failed with errcode %d\n",
+ __func__, status);
+ goto err;
+ }
+
+ return 0;
+err:
+ if (hdev) {
+ hci_unregister_dev(hdev);
+ hci_free_dev(hdev);
+ h_adapter->hdev = NULL;
+ }
+ kfree(h_adapter);
+
+ return -EINVAL;
+}
+
+void rsi_hci_detach(void *priv)
+{
+ struct rsi_hci_adapter *h_adapter = (struct rsi_hci_adapter *)priv;
+ struct hci_dev *hdev;
+
+ if (!h_adapter)
+ return;
+
+ hdev = h_adapter->hdev;
+ if (hdev) {
+ hci_unregister_dev(hdev);
+ hci_free_dev(hdev);
+ h_adapter->hdev = NULL;
+ }
+
+ kfree(h_adapter);
+}
+
+struct rsi_mod_ops *rsi_get_hci_ops(void)
+{
+ return &rsi_bt_ops;
+};
+EXPORT_SYMBOL_GPL(rsi_get_hci_ops);
+
+static int rsi_91x_bt_module_init(void)
+{
+ BT_INFO("%s: BT Module init called\n", __func__);
+
+ return 0;
+}
+
+static void rsi_91x_bt_module_exit(void)
+{
+ BT_INFO("%s: BT Module exit called\n", __func__);
+}
+
+module_init(rsi_91x_bt_module_init);
+module_exit(rsi_91x_bt_module_exit);
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("RSI BT driver");
+MODULE_SUPPORTED_DEVICE("RSI-BT");
+MODULE_LICENSE("Dual BSD/GPL");
new file mode 100644
@@ -0,0 +1,40 @@
+/**
+ * Copyright (c) 2017 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_HCI_H__
+#define __RSI_HCI_H__
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/rsi_header.h>
+#include <net/genetlink.h>
+
+/* RX frame types */
+#define RSI_RESULT_CONFIRM 0x80
+#define RSI_BT_PER 0x10
+#define RSI_BT_BER 0x11
+#define RSI_BT_CW 0x12
+
+#define RSI_HEADROOM_FOR_BT_HAL 16
+
+#define RSI_FRAME_DESC_SIZE 16
+
+int rsi_hci_attach(void *priv, struct rsi_proto_ops *ops);
+void rsi_hci_detach(void *priv);
+int rsi_hci_recv_pkt(void *data, u8 *pkt);
+
+#endif