diff mbox series

[3/3] ath10k: Add support to configure ftm responder role

Message ID 1534293018-4930-4-git-send-email-pradeepc@codeaurora.org (mailing list archive)
State Changes Requested
Delegated to: Johannes Berg
Headers show
Series Add support for ftm responder configuration | expand

Commit Message

Pradeep Kumar Chitrapu Aug. 15, 2018, 12:30 a.m. UTC
Configure fine timing measurement (FTM) responder role from the
ftm_responder bss param sent by mac80211. With FTM functionality
offloaded to firmware, adding the interface allows userspace
to enable or disable FTM responder functionality. ath10k disables
it at the time of interface creation.

Supported FW: 10.4

Tested on QCA9984 with debug firmware: 10.4-3.2.1-00121

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.h |  1 +
 drivers/net/wireless/ath/ath10k/mac.c  | 29 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.c  |  4 ++++
 drivers/net/wireless/ath/ath10k/wmi.h  | 10 ++++++++++
 4 files changed, 44 insertions(+)

Comments

Sebastian Gottschall Aug. 15, 2018, 10:03 a.m. UTC | #1
Am 15.08.2018 um 02:30 schrieb Pradeep Kumar Chitrapu:
> Configure fine timing measurement (FTM) responder role from the
> ftm_responder bss param sent by mac80211. With FTM functionality
> offloaded to firmware, adding the interface allows userspace
> to enable or disable FTM responder functionality. ath10k disables
> it at the time of interface creation.
>
> Supported FW: 10.4
>
> Tested on QCA9984 with debug firmware: 10.4-3.2.1-00121

Hello Pradeep

Just for curiosity 10.4-3.2.1-00121 is not available as firmware version 
for the community and does seem to be based on a old tree

how does it behave with more recent firmwares like 3.5 and 3.6 series?


Sebastian


> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
> ---
>   drivers/net/wireless/ath/ath10k/core.h |  1 +
>   drivers/net/wireless/ath/ath10k/mac.c  | 29 +++++++++++++++++++++++++++++
>   drivers/net/wireless/ath/ath10k/wmi.c  |  4 ++++
>   drivers/net/wireless/ath/ath10k/wmi.h  | 10 ++++++++++
>   4 files changed, 44 insertions(+)
>
> diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
> index 9feea02e7d37..db190230b292 100644
> --- a/drivers/net/wireless/ath/ath10k/core.h
> +++ b/drivers/net/wireless/ath/ath10k/core.h
> @@ -544,6 +544,7 @@ struct ath10k_vif {
>   	bool nohwcrypt;
>   	int num_legacy_stations;
>   	int txpower;
> +	bool ftm_responder;
>   	struct wmi_wmm_params_all_arg wmm_params;
>   	struct work_struct ap_csa_work;
>   	struct delayed_work connection_loss_work;
> diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
> index 90f9372dec25..cdb73b8cc253 100644
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -5259,6 +5259,17 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
>   		goto err_peer_delete;
>   	}
>   
> +	if (test_bit(WMI_SERVICE_RTT, ar->wmi.svc_map)) {
> +		vdev_param = ar->wmi.vdev_param->rtt_responder_role;
> +		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
> +						arvif->ftm_responder);
> +
> +		/* It is harmless to not set FTM role. Do not warn */
> +		if (ret && ret != -EOPNOTSUPP)
> +			ath10k_warn(ar, "failed to set vdev %i FTM Responder: %d\n",
> +				    arvif->vdev_id, ret);
> +	}
> +
>   	if (vif->type == NL80211_IFTYPE_MONITOR) {
>   		ar->monitor_arvif = arvif;
>   		ret = ath10k_monitor_recalc(ar);
> @@ -5532,6 +5543,20 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
>   	if (changed & BSS_CHANGED_BSSID && !is_zero_ether_addr(info->bssid))
>   		ether_addr_copy(arvif->bssid, info->bssid);
>   
> +	if (changed & BSS_CHANGED_FTM_RESPONDER &&
> +	    arvif->ftm_responder != info->ftm_responder &&
> +	    test_bit(WMI_SERVICE_RTT, ar->wmi.svc_map)) {
> +		arvif->ftm_responder = info->ftm_responder;
> +
> +		vdev_param = ar->wmi.vdev_param->rtt_responder_role;
> +		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
> +						arvif->ftm_responder);
> +
> +		ath10k_dbg(ar, ATH10K_DBG_MAC,
> +			   "mac vdev %d ftm_responder %d:ret %d\n",
> +			   arvif->vdev_id, arvif->ftm_responder, ret);
> +	}
> +
>   	if (changed & BSS_CHANGED_BEACON_ENABLED)
>   		ath10k_control_beaconing(arvif, info);
>   
> @@ -8463,6 +8488,10 @@ int ath10k_mac_register(struct ath10k *ar)
>   	wiphy_ext_feature_set(ar->hw->wiphy,
>   			      NL80211_EXT_FEATURE_SET_SCAN_DWELL);
>   
> +	if (test_bit(WMI_SERVICE_RTT, ar->wmi.svc_map))
> +		wiphy_ext_feature_set(ar->hw->wiphy,
> +				      NL80211_EXT_FEATURE_SET_FTM_RESPONDER);
> +
>   	/*
>   	 * on LL hardware queues are managed entirely by the FW
>   	 * so we only advertise to mac we can do the queues thing
> diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
> index fd612d2905b0..00c67d53eab8 100644
> --- a/drivers/net/wireless/ath/ath10k/wmi.c
> +++ b/drivers/net/wireless/ath/ath10k/wmi.c
> @@ -825,6 +825,7 @@
>   	.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
>   	.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
>   	.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
> +	.rtt_responder_role = WMI_VDEV_PARAM_UNSUPPORTED,
>   };
>   
>   /* 10.X WMI VDEV param map */
> @@ -900,6 +901,7 @@
>   	.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
>   	.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
>   	.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
> +	.rtt_responder_role = WMI_VDEV_PARAM_UNSUPPORTED,
>   };
>   
>   static struct wmi_vdev_param_map wmi_10_2_4_vdev_param_map = {
> @@ -974,6 +976,7 @@
>   	.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
>   	.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
>   	.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
> +	.rtt_responder_role = WMI_VDEV_PARAM_UNSUPPORTED,
>   };
>   
>   static struct wmi_vdev_param_map wmi_10_4_vdev_param_map = {
> @@ -1051,6 +1054,7 @@
>   	.bw_nss_ratemask = WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
>   	.inc_tsf = WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
>   	.dec_tsf = WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
> +	.rtt_responder_role = WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
>   };
>   
>   static struct wmi_pdev_param_map wmi_pdev_param_map = {
> diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
> index 36220258e3c7..fa94873fe46f 100644
> --- a/drivers/net/wireless/ath/ath10k/wmi.h
> +++ b/drivers/net/wireless/ath/ath10k/wmi.h
> @@ -5035,6 +5035,7 @@ struct wmi_vdev_param_map {
>   	u32 bw_nss_ratemask;
>   	u32 inc_tsf;
>   	u32 dec_tsf;
> +	u32 rtt_responder_role;
>   };
>   
>   #define WMI_VDEV_PARAM_UNSUPPORTED 0
> @@ -5374,6 +5375,15 @@ enum wmi_10_4_vdev_param {
>   	WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
>   	WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
>   	WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
> +	WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
> +	WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
> +	WMI_10_4_VDEV_PARAM_NSS_VHT160,
> +	WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
> +	WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
> +	WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
> +	WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
> +	WMI_10_4_VDEV_PARAM_TX_POWER,
> +	WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
>   };
>   
>   #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
Sebastian Gottschall Aug. 15, 2018, 10:16 a.m. UTC | #2
Am 15.08.2018 um 02:30 schrieb Pradeep Kumar Chitrapu:
>   
> +	if (test_bit(WMI_SERVICE_RTT, ar->wmi.svc_map))
> +		wiphy_ext_feature_set(ar->hw->wiphy,
> +				      NL80211_EXT_FEATURE_SET_FTM_RESPONDER);
> +

not sure if this is accurate. even if WMI_SERVICE_RTT is set, the 
firmware may not support this feature. this feature doesnt seem to be 
implemented in current firmware releases
i checked the firmware sourcecode i have from 3.4 series and it doesnt 
support this feature


Sebastian
Kalle Valo Oct. 1, 2018, 1:32 p.m. UTC | #3
Sebastian Gottschall <s.gottschall@dd-wrt.com> writes:

> Am 15.08.2018 um 02:30 schrieb Pradeep Kumar Chitrapu:
>>   +	if (test_bit(WMI_SERVICE_RTT, ar->wmi.svc_map))
>> +		wiphy_ext_feature_set(ar->hw->wiphy,
>> +				      NL80211_EXT_FEATURE_SET_FTM_RESPONDER);
>> +
>
> not sure if this is accurate. even if WMI_SERVICE_RTT is set, the
> firmware may not support this feature. this feature doesnt seem to be
> implemented in current firmware releases
> i checked the firmware sourcecode i have from 3.4 series and it doesnt
> support this feature

Pradeep, did you check this? It's really bad if ath10k enables the
feature even if the firmware doesn't support this.
Kalle Valo Nov. 16, 2018, 12:17 p.m. UTC | #4
Kalle Valo <kvalo@codeaurora.org> writes:

> Sebastian Gottschall <s.gottschall@dd-wrt.com> writes:
>
>> Am 15.08.2018 um 02:30 schrieb Pradeep Kumar Chitrapu:
>>>   +	if (test_bit(WMI_SERVICE_RTT, ar->wmi.svc_map))
>>> +		wiphy_ext_feature_set(ar->hw->wiphy,
>>> +				      NL80211_EXT_FEATURE_SET_FTM_RESPONDER);
>>> +
>>
>> not sure if this is accurate. even if WMI_SERVICE_RTT is set, the
>> firmware may not support this feature. this feature doesnt seem to be
>> implemented in current firmware releases
>> i checked the firmware sourcecode i have from 3.4 series and it doesnt
>> support this feature
>
> Pradeep, did you check this? It's really bad if ath10k enables the
> feature even if the firmware doesn't support this.

Pradeep, please clarify the situation. I don't want to enable features
when firmware doesn't support it.
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 9feea02e7d37..db190230b292 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -544,6 +544,7 @@  struct ath10k_vif {
 	bool nohwcrypt;
 	int num_legacy_stations;
 	int txpower;
+	bool ftm_responder;
 	struct wmi_wmm_params_all_arg wmm_params;
 	struct work_struct ap_csa_work;
 	struct delayed_work connection_loss_work;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 90f9372dec25..cdb73b8cc253 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5259,6 +5259,17 @@  static int ath10k_add_interface(struct ieee80211_hw *hw,
 		goto err_peer_delete;
 	}
 
+	if (test_bit(WMI_SERVICE_RTT, ar->wmi.svc_map)) {
+		vdev_param = ar->wmi.vdev_param->rtt_responder_role;
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+						arvif->ftm_responder);
+
+		/* It is harmless to not set FTM role. Do not warn */
+		if (ret && ret != -EOPNOTSUPP)
+			ath10k_warn(ar, "failed to set vdev %i FTM Responder: %d\n",
+				    arvif->vdev_id, ret);
+	}
+
 	if (vif->type == NL80211_IFTYPE_MONITOR) {
 		ar->monitor_arvif = arvif;
 		ret = ath10k_monitor_recalc(ar);
@@ -5532,6 +5543,20 @@  static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_BSSID && !is_zero_ether_addr(info->bssid))
 		ether_addr_copy(arvif->bssid, info->bssid);
 
+	if (changed & BSS_CHANGED_FTM_RESPONDER &&
+	    arvif->ftm_responder != info->ftm_responder &&
+	    test_bit(WMI_SERVICE_RTT, ar->wmi.svc_map)) {
+		arvif->ftm_responder = info->ftm_responder;
+
+		vdev_param = ar->wmi.vdev_param->rtt_responder_role;
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+						arvif->ftm_responder);
+
+		ath10k_dbg(ar, ATH10K_DBG_MAC,
+			   "mac vdev %d ftm_responder %d:ret %d\n",
+			   arvif->vdev_id, arvif->ftm_responder, ret);
+	}
+
 	if (changed & BSS_CHANGED_BEACON_ENABLED)
 		ath10k_control_beaconing(arvif, info);
 
@@ -8463,6 +8488,10 @@  int ath10k_mac_register(struct ath10k *ar)
 	wiphy_ext_feature_set(ar->hw->wiphy,
 			      NL80211_EXT_FEATURE_SET_SCAN_DWELL);
 
+	if (test_bit(WMI_SERVICE_RTT, ar->wmi.svc_map))
+		wiphy_ext_feature_set(ar->hw->wiphy,
+				      NL80211_EXT_FEATURE_SET_FTM_RESPONDER);
+
 	/*
 	 * on LL hardware queues are managed entirely by the FW
 	 * so we only advertise to mac we can do the queues thing
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index fd612d2905b0..00c67d53eab8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -825,6 +825,7 @@ 
 	.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
 	.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
 	.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
+	.rtt_responder_role = WMI_VDEV_PARAM_UNSUPPORTED,
 };
 
 /* 10.X WMI VDEV param map */
@@ -900,6 +901,7 @@ 
 	.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
 	.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
 	.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
+	.rtt_responder_role = WMI_VDEV_PARAM_UNSUPPORTED,
 };
 
 static struct wmi_vdev_param_map wmi_10_2_4_vdev_param_map = {
@@ -974,6 +976,7 @@ 
 	.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
 	.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
 	.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
+	.rtt_responder_role = WMI_VDEV_PARAM_UNSUPPORTED,
 };
 
 static struct wmi_vdev_param_map wmi_10_4_vdev_param_map = {
@@ -1051,6 +1054,7 @@ 
 	.bw_nss_ratemask = WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
 	.inc_tsf = WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
 	.dec_tsf = WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
+	.rtt_responder_role = WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
 };
 
 static struct wmi_pdev_param_map wmi_pdev_param_map = {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 36220258e3c7..fa94873fe46f 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -5035,6 +5035,7 @@  struct wmi_vdev_param_map {
 	u32 bw_nss_ratemask;
 	u32 inc_tsf;
 	u32 dec_tsf;
+	u32 rtt_responder_role;
 };
 
 #define WMI_VDEV_PARAM_UNSUPPORTED 0
@@ -5374,6 +5375,15 @@  enum wmi_10_4_vdev_param {
 	WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
 	WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
 	WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
+	WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
+	WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
+	WMI_10_4_VDEV_PARAM_NSS_VHT160,
+	WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
+	WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
+	WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
+	WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
+	WMI_10_4_VDEV_PARAM_TX_POWER,
+	WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
 };
 
 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)