@@ -1137,36 +1137,47 @@ void rt2800_txdone(struct rt2x00_dev *rt2x00dev)
}
EXPORT_SYMBOL_GPL(rt2800_txdone);
-static inline bool rt2800_entry_txstatus_timeout(struct queue_entry *entry)
+static inline bool rt2800_entry_txstatus_timeout(struct rt2x00_dev *rt2x00dev,
+ struct queue_entry *entry)
{
- bool tout;
+ bool ret;
+ unsigned long tout;
if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
return false;
- tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(500));
- if (unlikely(tout))
+ if (test_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags))
+ tout = msecs_to_jiffies(100);
+ else
+ tout = msecs_to_jiffies(2000);
+
+ ret = time_after(jiffies, entry->last_action + tout);
+ if (unlikely(ret))
rt2x00_dbg(entry->queue->rt2x00dev,
"TX status timeout for entry %d in queue %d\n",
entry->entry_idx, entry->queue->qid);
- return tout;
-
+ return ret;
}
bool rt2800_txstatus_timeout(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
struct queue_entry *entry;
+ unsigned long tout;
+
+ if (test_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags))
+ tout = msecs_to_jiffies(50);
+ else
+ tout = msecs_to_jiffies(1000);
- if (time_before(jiffies,
- rt2x00dev->last_nostatus_check + msecs_to_jiffies(500)))
+ if (time_before(jiffies, rt2x00dev->last_nostatus_check + tout))
return false;
rt2x00dev->last_nostatus_check = jiffies;
tx_queue_for_each(rt2x00dev, queue) {
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
- if (rt2800_entry_txstatus_timeout(entry))
+ if (rt2800_entry_txstatus_timeout(rt2x00dev, entry))
return true;
}
@@ -1195,7 +1206,7 @@ void rt2800_txdone_nostatus(struct rt2x00_dev *rt2x00dev)
break;
if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags) ||
- rt2800_entry_txstatus_timeout(entry))
+ rt2800_entry_txstatus_timeout(rt2x00dev, entry))
rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
else
break;
@@ -665,6 +665,7 @@ enum rt2x00_state_flags {
DEVICE_STATE_STARTED,
DEVICE_STATE_ENABLED_RADIO,
DEVICE_STATE_SCANNING,
+ DEVICE_STATE_FLUSHING,
/*
* Driver configuration
@@ -720,8 +720,12 @@ void rt2x00mac_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return;
+ set_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags);
+
tx_queue_for_each(rt2x00dev, queue)
rt2x00queue_flush_queue(queue, drop);
+
+ clear_bit(DEVICE_STATE_FLUSHING, &rt2x00dev->flags);
}
EXPORT_SYMBOL_GPL(rt2x00mac_flush);
Use different tx status timeouts for normal operation and when flushing. This increase timeout to 2s for normal operation as when there are bad radio conditions and frames are reposted many times device can not provide the status for quite long. With new timeout we can still get valid status on such bad conditions. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> --- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 31 +++++++++++++++++--------- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 + drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 4 ++++ 3 files changed, 26 insertions(+), 10 deletions(-)