@@ -3891,18 +3891,24 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.rx_chain_num) {
case 3:
/* Turn on tertiary LNAs */
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN,
+ rf->channel > 14);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN,
+ rf->channel <= 14);
/* fall-through */
case 2:
/* Turn on secondary LNAs */
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN,
+ rf->channel > 14);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN,
+ rf->channel <= 14);
/* fall-through */
case 1:
/* Turn on primary LNAs */
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
- rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN,
+ rf->channel > 14);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN,
+ rf->channel <= 14);
break;
}
Do not enable TX_PIN_CFG_LNA_PE_A* bits for 2.4GHz band and vice versa TX_PIN_CFG_LNA_PE_G* bits for 5GHz. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> --- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)