| Message ID | 1541086502-21239-1-git-send-email-sgruszka@redhat.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | [v3,1/2] mt76x02: run calibration after scanning | expand |
On 2018-11-01 16:35, Stanislaw Gruszka wrote: > If we are associated and scanning is performed, sw_scan_complete callback > is done after we get back to operating channel, so we do not perform > queue cal work. Fix this queue cal work from sw_scan_complete(). > > On mt76x0 we have to restore gain in MT_BBP(AGC, 8) register after > scanning, as it was multiple times modified by channel switch code. > So queue cal work without any delay to set AGC gain value. > > Similar like in mt76x2 init AGC gain only when set operating channel > and just check before queuing cal work in sw_scan_complete() if > initialization was already done. > > Fixes: bbd10586f0df ("mt76x0: phy: do not run calibration during channel switch") > Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Applied both patches, thanks. - Felix
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c index ba3cbceb5dd2..b2cbe4f19023 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c @@ -657,13 +657,13 @@ int mt76x0_phy_set_channel(struct mt76x02_dev *dev, mt76x0_read_rx_gain(dev); mt76x0_phy_set_chan_bbp_params(dev, rf_bw_band); - mt76x02_init_agc_gain(dev); /* enable vco */ mt76x0_rf_set(dev, MT_RF(0, 4), BIT(7)); if (scan) return 0; + mt76x02_init_agc_gain(dev); mt76x0_phy_calibrate(dev, false); mt76x0_phy_set_txpower(dev); diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02.h b/drivers/net/wireless/mediatek/mt76/mt76x02.h index 19489a72fc2b..3a3324eb4a69 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x02.h +++ b/drivers/net/wireless/mediatek/mt76/mt76x02.h @@ -57,6 +57,7 @@ struct mt76x02_calibration { bool tssi_comp_pending; bool dpd_cal_done; bool channel_cal_done; + bool gain_init_done; }; struct mt76x02_dev { diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_phy.c b/drivers/net/wireless/mediatek/mt76/mt76x02_phy.c index 0f1d7b5c9f68..977a8e7e26df 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x02_phy.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_phy.c @@ -254,5 +254,6 @@ void mt76x02_init_agc_gain(struct mt76x02_dev *dev) memcpy(dev->cal.agc_gain_cur, dev->cal.agc_gain_init, sizeof(dev->cal.agc_gain_cur)); dev->cal.low_gain = -1; + dev->cal.gain_init_done = true; } EXPORT_SYMBOL_GPL(mt76x02_init_agc_gain); diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c index adfc46419b6b..8a250224fcd7 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c @@ -554,6 +554,9 @@ void mt76x02_sw_scan_complete(struct ieee80211_hw *hw, clear_bit(MT76_SCANNING, &dev->mt76.state); if (mt76_is_mmio(dev)) tasklet_enable(&dev->pre_tbtt_tasklet); + + if (dev->cal.gain_init_done) + ieee80211_queue_delayed_work(hw, &dev->cal_work, 0); } EXPORT_SYMBOL_GPL(mt76x02_sw_scan_complete);
If we are associated and scanning is performed, sw_scan_complete callback is done after we get back to operating channel, so we do not perform queue cal work. Fix this queue cal work from sw_scan_complete(). On mt76x0 we have to restore gain in MT_BBP(AGC, 8) register after scanning, as it was multiple times modified by channel switch code. So queue cal work without any delay to set AGC gain value. Similar like in mt76x2 init AGC gain only when set operating channel and just check before queuing cal work in sw_scan_complete() if initialization was already done. Fixes: bbd10586f0df ("mt76x0: phy: do not run calibration during channel switch") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> --- v1 -> v2: only queue cal work with 0 delay v2 -> v3: - do not check for assoc, check init gain was done - do not init agc gain for any channel in mt76x0 drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 2 +- drivers/net/wireless/mediatek/mt76/mt76x02.h | 1 + drivers/net/wireless/mediatek/mt76/mt76x02_phy.c | 1 + drivers/net/wireless/mediatek/mt76/mt76x02_util.c | 3 +++ 4 files changed, 6 insertions(+), 1 deletion(-)