diff mbox series

[V4,3/8] brcmfmac: set SDIO F1 MesBusyCtrl for CYW4373

Message ID 1542786800-146083-4-git-send-email-chi-hsien.lin@cypress.com (mailing list archive)
State Accepted
Commit 58e4bbea0c1d9b5ace11df968c5dc096ce052a73
Delegated to: Kalle Valo
Headers show
Series brcmfmac: chip related changes | expand

Commit Message

Chi-Hsien Lin Nov. 21, 2018, 7:53 a.m. UTC 
From: Madhan Mohan R <MadhanMohan.R@cypress.com>

Along with F2 watermark (existing) configuration, F1 MesBusyCtrl
should be enabled & sdio device RX FIFO watermark should be
configured to avoid overflow errors.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 3 +++
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h | 9 ++++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index c833e24c751c..7a0601543dff 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -4119,6 +4119,9 @@  static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 			devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
 			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
 					   &err);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
+					   CY_4373_F2_WATERMARK |
+					   SBSDIO_MESBUSYCTRL_ENAB, &err);
 			break;
 		default:
 			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index 7faed831f07d..34b031154da9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -77,7 +77,7 @@ 
 #define SBSDIO_GPIO_OUT			0x10006
 /* gpio enable */
 #define SBSDIO_GPIO_EN			0x10007
-/* rev < 7, watermark for sdio device */
+/* rev < 7, watermark for sdio device TX path */
 #define SBSDIO_WATERMARK		0x10008
 /* control busy signal generation */
 #define SBSDIO_DEVICE_CTL		0x10009
@@ -104,6 +104,13 @@ 
 #define SBSDIO_FUNC1_RFRAMEBCHI		0x1001C
 /* MesBusyCtl (rev 11) */
 #define SBSDIO_FUNC1_MESBUSYCTRL	0x1001D
+/* Watermark for sdio device RX path */
+#define SBSDIO_MESBUSY_RXFIFO_WM_MASK	0x7F
+#define SBSDIO_MESBUSY_RXFIFO_WM_SHIFT	0
+/* Enable busy capability for MES access */
+#define SBSDIO_MESBUSYCTRL_ENAB		0x80
+#define SBSDIO_MESBUSYCTRL_ENAB_SHIFT	7
+
 /* Sdio Core Rev 12 */
 #define SBSDIO_FUNC1_WAKEUPCTRL		0x1001E
 #define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK		0x1