diff mbox series

[v2,2/4] mt76x02: fixup MT_PROT_RATE_* defines

Message ID 1544439238-4118-2-git-send-email-sgruszka@redhat.com (mailing list archive)
State Accepted
Delegated to: Kalle Valo
Headers show
Series [v2,1/4] mt76x02: do not set protection on set_rts_threshold callback | expand

Commit Message

Stanislaw Gruszka Dec. 10, 2018, 10:53 a.m. UTC 
On new mt76 chips, phy mode is configured by last 3 bits
of rate value. Hence OFDM bit is marked by 0x2000
instead of 0x4000.

Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 drivers/net/wireless/mediatek/mt76/mt76x02_regs.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_regs.h b/drivers/net/wireless/mediatek/mt76/mt76x02_regs.h
index f7de77d09d28..d1ac847adce5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_regs.h
@@ -440,9 +440,9 @@ 
 #define MT_PROT_TXOP_ALLOW_GF40		BIT(25)
 #define MT_PROT_RTS_THR_EN		BIT(26)
 #define MT_PROT_RATE_CCK_11		0x0003
-#define MT_PROT_RATE_OFDM_6		0x4000
-#define MT_PROT_RATE_OFDM_24		0x4004
-#define MT_PROT_RATE_DUP_OFDM_24	0x4084
+#define MT_PROT_RATE_OFDM_6		0x2000
+#define MT_PROT_RATE_OFDM_24		0x2004
+#define MT_PROT_RATE_DUP_OFDM_24	0x2084
 #define MT_PROT_TXOP_ALLOW_ALL		GENMASK(25, 20)
 #define MT_PROT_TXOP_ALLOW_BW20		(MT_PROT_TXOP_ALLOW_ALL &	\
 					 ~MT_PROT_TXOP_ALLOW_MM40 &	\