diff mbox series

ath10k: Fix hw-restart crash inject mode for WCN3990

Message ID 1548753967-2233-1-git-send-email-pillair@codeaurora.org (mailing list archive)
State Accepted
Commit cdb78e5af49105917ba5694bc616d12b0a4f85f3
Delegated to: Kalle Valo
Headers show
Series ath10k: Fix hw-restart crash inject mode for WCN3990 | expand

Commit Message

Rakesh Pillai Jan. 29, 2019, 9:26 a.m. UTC
The hw-restart crash inject mode is a special mode, where
there is no crash generated in the firmware, but instead
the driver restarts the firmware. In order to restart WCN3990
firmware, the driver needs to send qmi_wlan_disable message
followed by the qmi_wlan_enable message to the WCN3990 firmware.

Currently the qmi_wlan_disable message is not sent to
the WCN3990 firmware when hw-restart crash is injected,
which causes the firmware to crash when the driver sends
qmi_wlan_enable message during ath10k_restart.

Send qmi_wlan_disable to the WCN3990 firmware when the
hw-restart crash is injected via debugfs.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/snoc.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

Comments

Kalle Valo Feb. 7, 2019, 2:51 p.m. UTC | #1
Rakesh Pillai <pillair@codeaurora.org> wrote:

> The hw-restart crash inject mode is a special mode, where
> there is no crash generated in the firmware, but instead
> the driver restarts the firmware. In order to restart WCN3990
> firmware, the driver needs to send qmi_wlan_disable message
> followed by the qmi_wlan_enable message to the WCN3990 firmware.
> 
> Currently the qmi_wlan_disable message is not sent to
> the WCN3990 firmware when hw-restart crash is injected,
> which causes the firmware to crash when the driver sends
> qmi_wlan_enable message during ath10k_restart.
> 
> Send qmi_wlan_disable to the WCN3990 firmware when the
> hw-restart crash is injected via debugfs.
> 
> Tested HW: WCN3990
> Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
> 
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

cdb78e5af491 ath10k: fix hw-restart crash inject mode for WCN3990
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index 54efe6b..cceb6d4 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1000,7 +1000,16 @@  static int ath10k_snoc_wlan_enable(struct ath10k *ar)
 
 static void ath10k_snoc_wlan_disable(struct ath10k *ar)
 {
-	if (!test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags))
+	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
+
+	/* If both ATH10K_FLAG_CRASH_FLUSH and ATH10K_SNOC_FLAG_RECOVERY
+	 * flags are not set, it means that the driver has restarted
+	 * due to a crash inject via debugfs. In this case, the driver
+	 * needs to restart the firmware and hence send qmi wlan disable,
+	 * during the driver restart sequence.
+	 */
+	if (!test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags) ||
+	    !test_bit(ATH10K_SNOC_FLAG_RECOVERY, &ar_snoc->flags))
 		ath10k_qmi_wlan_disable(ar);
 }