diff mbox series

[v3,7/7] mt76x02: enable support for IBSS and MESH

Message ID 1548864139-27729-8-git-send-email-sgruszka@redhat.com (mailing list archive)
State Accepted
Delegated to: Kalle Valo
Headers show
Series mt76x02: Beacon support for USB | expand

Commit Message

Stanislaw Gruszka Jan. 30, 2019, 4:02 p.m. UTC 
Since we implement beconing on USB now, similar interfaces should be
supported for USB as are for MMIO. Tested only on IBSS mode and
AP mode (not enabled due to lack of PS buffering).

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
v3: enable only IBSS and MESH, do not change iface_combinations

 .../net/wireless/mediatek/mt76/mt76x02_util.c | 21 +++++++++----------
 1 file changed, 10 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
index 724b13d91898..87ed00768bc7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
@@ -140,10 +140,16 @@  void mt76x02_init_device(struct mt76x02_dev *dev)
 	hw->max_rate_tries = 1;
 	hw->extra_tx_headroom = 2;
 
+	wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_STATION) |
+#ifdef CONFIG_MAC80211_MESH
+		BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+		BIT(NL80211_IFTYPE_ADHOC);
+
 	if (mt76_is_usb(dev)) {
 		hw->extra_tx_headroom += sizeof(struct mt76x02_txwi) +
 					 MT_DMA_HDR_LEN;
-		wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 	} else {
 		INIT_DELAYED_WORK(&dev->wdt_work, mt76x02_wdt_work);
 
@@ -152,18 +158,9 @@  void mt76x02_init_device(struct mt76x02_dev *dev)
 		wiphy->reg_notifier = mt76x02_regd_notifier;
 		wiphy->iface_combinations = mt76x02_if_comb;
 		wiphy->n_iface_combinations = ARRAY_SIZE(mt76x02_if_comb);
-		wiphy->interface_modes =
-			BIT(NL80211_IFTYPE_STATION) |
-			BIT(NL80211_IFTYPE_AP) |
-#ifdef CONFIG_MAC80211_MESH
-			BIT(NL80211_IFTYPE_MESH_POINT) |
-#endif
-			BIT(NL80211_IFTYPE_ADHOC);
-
+		wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP);
 		wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
 
-		wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_VHT_IBSS);
-
 		/* init led callbacks */
 		if (IS_ENABLED(CONFIG_MT76_LEDS)) {
 			dev->mt76.led_cdev.brightness_set =
@@ -172,6 +169,8 @@  void mt76x02_init_device(struct mt76x02_dev *dev)
 		}
 	}
 
+	wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_VHT_IBSS);
+
 	hw->sta_data_size = sizeof(struct mt76x02_sta);
 	hw->vif_data_size = sizeof(struct mt76x02_vif);