diff mbox series

[19/21] wil6210: add support for ucode tracing

Message ID 1550845279-16103-20-git-send-email-merez@codeaurora.org (mailing list archive)
State Accepted
Commit 8454e72a3644c7f3617ed85be899291f344dba7f
Delegated to: Kalle Valo
Headers show
Series wil6210 patches | expand

Commit Message

Maya Erez Feb. 22, 2019, 2:21 p.m. UTC 
From: Ahmad Masri <amasri@codeaurora.org>

The driver needs to expose RGF_USER_USAGE_2 register that contains
the offset of the ucode logging table.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/debugfs.c | 1 +
 drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
 2 files changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 817762f..78320ec 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -2392,6 +2392,7 @@  static void wil6210_debugfs_init_isr(struct wil6210_priv *wil,
 	{"RGF_MAC_MTRL_COUNTER_0", 0444, HOSTADDR(RGF_MAC_MTRL_COUNTER_0),
 		doff_io32},
 	{"RGF_USER_USAGE_1", 0444, HOSTADDR(RGF_USER_USAGE_1), doff_io32},
+	{"RGF_USER_USAGE_2", 0444, HOSTADDR(RGF_USER_USAGE_2), doff_io32},
 	{},
 };
 
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 9d7e02e..f508d52 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -185,6 +185,7 @@  struct RGF_ICR {
 
 /* registers - FW addresses */
 #define RGF_USER_USAGE_1		(0x880004)
+#define RGF_USER_USAGE_2		(0x880008)
 #define RGF_USER_USAGE_6		(0x880018)
 	#define BIT_USER_OOB_MODE		BIT(31)
 	#define BIT_USER_OOB_R2_MODE		BIT(30)