@@ -195,8 +195,19 @@ void mt76x02_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_bss_conf *info, u32 changed);
extern const u16 mt76x02_beacon_offsets[16];
+struct beacon_bc_data {
+ struct mt76x02_dev *dev;
+ struct sk_buff_head q;
+ struct sk_buff *tail[8];
+};
void mt76x02_init_beacon_config(struct mt76x02_dev *dev);
void mt76x02e_init_beacon_config(struct mt76x02_dev *dev);
+void mt76x02_resync_beacon_timer(struct mt76x02_dev *dev);
+void mt76x02_update_beacon_iter(void *priv, u8 *mac, struct ieee80211_vif *vif);
+void mt76x02_enqueue_buffered_bc(struct mt76x02_dev *dev,
+ struct beacon_bc_data *data,
+ int max_nframes);
+
void mt76x02_mac_start(struct mt76x02_dev *dev);
void mt76x02_init_debugfs(struct mt76x02_dev *dev);
@@ -184,6 +184,108 @@ void mt76x02_mac_set_beacon_enable(struct mt76x02_dev *dev,
dev->beacon_ops->pre_tbtt_enable(dev, true);
}
+void
+mt76x02_resync_beacon_timer(struct mt76x02_dev *dev)
+{
+ u32 timer_val = dev->beacon_int << 4;
+
+ dev->tbtt_count++;
+
+ /*
+ * Beacon timer drifts by 1us every tick, the timer is configured
+ * in 1/16 TU (64us) units.
+ */
+ if (dev->tbtt_count < 63)
+ return;
+
+ /*
+ * The updated beacon interval takes effect after two TBTT, because
+ * at this point the original interval has already been loaded into
+ * the next TBTT_TIMER value
+ */
+ if (dev->tbtt_count == 63)
+ timer_val -= 1;
+
+ mt76_rmw_field(dev, MT_BEACON_TIME_CFG,
+ MT_BEACON_TIME_CFG_INTVAL, timer_val);
+
+ if (dev->tbtt_count >= 64) {
+ dev->tbtt_count = 0;
+ return;
+ }
+}
+EXPORT_SYMBOL_GPL(mt76x02_resync_beacon_timer);
+
+void
+mt76x02_update_beacon_iter(void *priv, u8 *mac, struct ieee80211_vif *vif)
+{
+ struct mt76x02_dev *dev = (struct mt76x02_dev *)priv;
+ struct mt76x02_vif *mvif = (struct mt76x02_vif *)vif->drv_priv;
+ struct sk_buff *skb = NULL;
+
+ if (!(dev->beacon_mask & BIT(mvif->idx)))
+ return;
+
+ skb = ieee80211_beacon_get(mt76_hw(dev), vif);
+ if (!skb)
+ return;
+
+ mt76x02_mac_set_beacon(dev, mvif->idx, skb);
+}
+EXPORT_SYMBOL_GPL(mt76x02_update_beacon_iter);
+
+static void
+mt76x02_add_buffered_bc(void *priv, u8 *mac, struct ieee80211_vif *vif)
+{
+ struct beacon_bc_data *data = priv;
+ struct mt76x02_dev *dev = data->dev;
+ struct mt76x02_vif *mvif = (struct mt76x02_vif *)vif->drv_priv;
+ struct ieee80211_tx_info *info;
+ struct sk_buff *skb;
+
+ if (!(dev->beacon_mask & BIT(mvif->idx)))
+ return;
+
+ skb = ieee80211_get_buffered_bc(mt76_hw(dev), vif);
+ if (!skb)
+ return;
+
+ info = IEEE80211_SKB_CB(skb);
+ info->control.vif = vif;
+ info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
+ mt76_skb_set_moredata(skb, true);
+ __skb_queue_tail(&data->q, skb);
+ data->tail[mvif->idx] = skb;
+}
+
+void
+mt76x02_enqueue_buffered_bc(struct mt76x02_dev *dev, struct beacon_bc_data *data,
+ int max_nframes)
+{
+ int i, nframes;
+
+ data->dev = dev;
+ __skb_queue_head_init(&data->q);
+
+ do {
+ nframes = skb_queue_len(&data->q);
+ ieee80211_iterate_active_interfaces_atomic(mt76_hw(dev),
+ IEEE80211_IFACE_ITER_RESUME_ALL,
+ mt76x02_add_buffered_bc, data);
+ } while (nframes != skb_queue_len(&data->q) &&
+ skb_queue_len(&data->q) < max_nframes);
+
+ if (!skb_queue_len(&data->q))
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(data->tail); i++) {
+ if (!data->tail[i])
+ continue;
+ mt76_skb_set_moredata(data->tail[i], false);
+ }
+}
+EXPORT_SYMBOL_GPL(mt76x02_enqueue_buffered_bc);
+
void mt76x02_init_beacon_config(struct mt76x02_dev *dev)
{
int i;
@@ -22,97 +22,16 @@
#include "mt76x02_mcu.h"
#include "mt76x02_trace.h"
-struct beacon_bc_data {
- struct mt76x02_dev *dev;
- struct sk_buff_head q;
- struct sk_buff *tail[8];
-};
-
-static void
-mt76x02_update_beacon_iter(void *priv, u8 *mac, struct ieee80211_vif *vif)
-{
- struct mt76x02_dev *dev = (struct mt76x02_dev *)priv;
- struct mt76x02_vif *mvif = (struct mt76x02_vif *)vif->drv_priv;
- struct sk_buff *skb = NULL;
-
- if (!(dev->beacon_mask & BIT(mvif->idx)))
- return;
-
- skb = ieee80211_beacon_get(mt76_hw(dev), vif);
- if (!skb)
- return;
-
- mt76x02_mac_set_beacon(dev, mvif->idx, skb);
-}
-
-static void
-mt76x02_add_buffered_bc(void *priv, u8 *mac, struct ieee80211_vif *vif)
-{
- struct beacon_bc_data *data = priv;
- struct mt76x02_dev *dev = data->dev;
- struct mt76x02_vif *mvif = (struct mt76x02_vif *)vif->drv_priv;
- struct ieee80211_tx_info *info;
- struct sk_buff *skb;
-
- if (!(dev->beacon_mask & BIT(mvif->idx)))
- return;
-
- skb = ieee80211_get_buffered_bc(mt76_hw(dev), vif);
- if (!skb)
- return;
-
- info = IEEE80211_SKB_CB(skb);
- info->control.vif = vif;
- info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
- mt76_skb_set_moredata(skb, true);
- __skb_queue_tail(&data->q, skb);
- data->tail[mvif->idx] = skb;
-}
-
-static void
-mt76x02_resync_beacon_timer(struct mt76x02_dev *dev)
-{
- u32 timer_val = dev->beacon_int << 4;
-
- dev->tbtt_count++;
-
- /*
- * Beacon timer drifts by 1us every tick, the timer is configured
- * in 1/16 TU (64us) units.
- */
- if (dev->tbtt_count < 63)
- return;
-
- /*
- * The updated beacon interval takes effect after two TBTT, because
- * at this point the original interval has already been loaded into
- * the next TBTT_TIMER value
- */
- if (dev->tbtt_count == 63)
- timer_val -= 1;
-
- mt76_rmw_field(dev, MT_BEACON_TIME_CFG,
- MT_BEACON_TIME_CFG_INTVAL, timer_val);
-
- if (dev->tbtt_count >= 64) {
- dev->tbtt_count = 0;
- return;
- }
-}
-
static void mt76x02_pre_tbtt_tasklet(unsigned long arg)
{
struct mt76x02_dev *dev = (struct mt76x02_dev *)arg;
struct mt76_queue *q = dev->mt76.q_tx[MT_TXQ_PSD].q;
struct beacon_bc_data data = {};
struct sk_buff *skb;
- int i, nframes;
+ int i;
mt76x02_resync_beacon_timer(dev);
- data.dev = dev;
- __skb_queue_head_init(&data.q);
-
ieee80211_iterate_active_interfaces_atomic(mt76_hw(dev),
IEEE80211_IFACE_ITER_RESUME_ALL,
mt76x02_update_beacon_iter, dev);
@@ -122,13 +41,7 @@ static void mt76x02_pre_tbtt_tasklet(unsigned long arg)
if (dev->mt76.csa_complete)
return;
- do {
- nframes = skb_queue_len(&data.q);
- ieee80211_iterate_active_interfaces_atomic(mt76_hw(dev),
- IEEE80211_IFACE_ITER_RESUME_ALL,
- mt76x02_add_buffered_bc, &data);
- } while (nframes != skb_queue_len(&data.q) &&
- skb_queue_len(&data.q) < 8);
+ mt76x02_enqueue_buffered_bc(dev, &data, 8);
if (!skb_queue_len(&data.q))
return;
Move some TBTT mmio functions to mt76x02_beacon.c and create new ones in order to be reused by USB pre-TBTT. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> --- drivers/net/wireless/mediatek/mt76/mt76x02.h | 11 +++ .../net/wireless/mediatek/mt76/mt76x02_beacon.c | 102 +++++++++++++++++++++ drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c | 91 +----------------- 3 files changed, 115 insertions(+), 89 deletions(-)