[4/6] ath10k: initialise struct ath10k_bus params to zero

Commit Message

Kalle Valo April 12, 2019, 1:28 p.m. UTC

This way we don't need to set every variable and give them to default, which is
zero. This is also safer in case we forgot to initalise a new field in some of
the bus modules.

Compile tested only.

Signed-off-by: Kalle Valo <[e-mail]>
---
 drivers/net/wireless/ath/ath10k/ahb.c  |    2 +-
 drivers/net/wireless/ath/ath10k/pci.c  |    2 +-
 drivers/net/wireless/ath/ath10k/sdio.c |    2 +-
 drivers/net/wireless/ath/ath10k/snoc.c |    2 +-
 drivers/net/wireless/ath/ath10k/usb.c  |    2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

Patch

diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index 0bf726c55736..f80854180e21 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -740,7 +740,7 @@  static int ath10k_ahb_probe(struct platform_device *pdev)
 	enum ath10k_hw_rev hw_rev;
 	size_t size;
 	int ret;
-	struct ath10k_bus_params bus_params;
+	struct ath10k_bus_params bus_params = {};
 
 	of_id = of_match_device(ath10k_ahb_of_match, &pdev->dev);
 	if (!of_id) {
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 271f92c24d44..13c24cd977d2 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3478,7 +3478,7 @@  static int ath10k_pci_probe(struct pci_dev *pdev,
 	struct ath10k *ar;
 	struct ath10k_pci *ar_pci;
 	enum ath10k_hw_rev hw_rev;
-	struct ath10k_bus_params bus_params;
+	struct ath10k_bus_params bus_params = {};
 	bool pci_ps;
 	int (*pci_soft_reset)(struct ath10k *ar);
 	int (*pci_hard_reset)(struct ath10k *ar);
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index d573d24624c0..bbfdc4d7cf5f 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -1954,7 +1954,7 @@  static int ath10k_sdio_probe(struct sdio_func *func,
 	struct ath10k *ar;
 	enum ath10k_hw_rev hw_rev;
 	u32 dev_id_base;
-	struct ath10k_bus_params bus_params;
+	struct ath10k_bus_params bus_params = {};
 	int ret, i;
 
 	/* Assumption: All SDIO based chipsets (so far) are QCA6174 based.
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index 873cb4ce419b..845914f2eaf8 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1249,7 +1249,7 @@  static int ath10k_snoc_resource_init(struct ath10k *ar)
 int ath10k_snoc_fw_indication(struct ath10k *ar, u64 type)
 {
 	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
-	struct ath10k_bus_params bus_params;
+	struct ath10k_bus_params bus_params = {};
 	int ret;
 
 	if (test_bit(ATH10K_SNOC_FLAG_UNREGISTERING, &ar_snoc->flags))
diff --git a/drivers/net/wireless/ath/ath10k/usb.c b/drivers/net/wireless/ath/ath10k/usb.c
index 970cf69ac35f..2fb0fb40e86d 100644
--- a/drivers/net/wireless/ath/ath10k/usb.c
+++ b/drivers/net/wireless/ath/ath10k/usb.c
@@ -973,7 +973,7 @@  static int ath10k_usb_probe(struct usb_interface *interface,
 	struct usb_device *dev = interface_to_usbdev(interface);
 	int ret, vendor_id, product_id;
 	enum ath10k_hw_rev hw_rev;
-	struct ath10k_bus_params bus_params;
+	struct ath10k_bus_params bus_params = {};
 
 	/* Assumption: All USB based chipsets (so far) are QCA9377 based.
 	 * If there will be newer chipsets that does not use the hw reg