@@ -1215,6 +1215,60 @@ void rt2800_txdone_nostatus(struct rt2x00_dev *rt2x00dev)
}
EXPORT_SYMBOL_GPL(rt2800_txdone_nostatus);
+static int rt2800_check_hung(struct data_queue *queue)
+{
+ unsigned int cur_idx = rt2800_drv_get_dma_done(queue);
+
+ if (queue->wd_idx != cur_idx)
+ queue->wd_count = 0;
+ else
+ queue->wd_count++;
+
+ return queue->wd_count > 16;
+}
+
+void rt2800_watchdog(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+ bool hung_tx = false;
+ bool hung_rx = false;
+
+ if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
+ return;
+
+ queue_for_each(rt2x00dev, queue) {
+ switch (queue->qid) {
+ case QID_AC_VO:
+ case QID_AC_VI:
+ case QID_AC_BE:
+ case QID_AC_BK:
+ case QID_MGMT:
+ if (rt2x00queue_empty(queue))
+ continue;
+ hung_tx = rt2800_check_hung(queue);
+ break;
+ case QID_RX:
+ /* For station mode we should reactive at least
+ * beacons. TODO: need to find good way detect
+ * RX hung for AP mode.
+ */
+ if (rt2x00dev->intf_sta_count == 0)
+ continue;
+ hung_rx = rt2800_check_hung(queue);
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (hung_tx)
+ rt2x00_warn(rt2x00dev, "Watchdog TX hung detected\n");
+
+ if (hung_rx)
+ rt2x00_warn(rt2x00dev, "Watchdog RX hung detected\n");
+}
+EXPORT_SYMBOL_GPL(rt2800_watchdog);
+
static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev,
unsigned int index)
{
@@ -10214,6 +10268,8 @@ int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
}
+ rt2x00dev->link.watchdog_interval = msecs_to_jiffies(100);
+
/*
* Set the rssi offset.
*/
@@ -207,6 +207,8 @@ void rt2800_txdone(struct rt2x00_dev *rt2x00dev);
void rt2800_txdone_nostatus(struct rt2x00_dev *rt2x00dev);
bool rt2800_txstatus_timeout(struct rt2x00_dev *rt2x00dev);
+void rt2800_watchdog(struct rt2x00_dev *rt2x00dev);
+
void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc);
void rt2800_clear_beacon(struct queue_entry *entry);
@@ -362,6 +362,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.link_tuner = rt2800_link_tuner,
.gain_calibration = rt2800_gain_calibration,
.vco_calibration = rt2800_vco_calibration,
+ .watchdog = rt2800_watchdog,
.start_queue = rt2800mmio_start_queue,
.kick_queue = rt2800mmio_kick_queue,
.stop_queue = rt2800mmio_stop_queue,
@@ -208,6 +208,7 @@ static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
.link_tuner = rt2800_link_tuner,
.gain_calibration = rt2800_gain_calibration,
.vco_calibration = rt2800_vco_calibration,
+ .watchdog = rt2800_watchdog,
.start_queue = rt2800mmio_start_queue,
.kick_queue = rt2800mmio_kick_queue,
.stop_queue = rt2800mmio_stop_queue,
@@ -714,6 +714,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.link_tuner = rt2800_link_tuner,
.gain_calibration = rt2800_gain_calibration,
.vco_calibration = rt2800_vco_calibration,
+ .watchdog = rt2800_watchdog,
.start_queue = rt2800usb_start_queue,
.kick_queue = rt2x00usb_kick_queue,
.stop_queue = rt2800usb_stop_queue,
@@ -449,6 +449,9 @@ enum data_queue_flags {
* @length: Number of frames in queue.
* @index: Index pointers to entry positions in the queue,
* use &enum queue_index to get a specific index field.
+ * @wd_count: watchdog counter number of times entry does change
+ * in the queue
+ * @wd_idx: index of queue entry saved by watchdog
* @txop: maximum burst time.
* @aifs: The aifs value for outgoing frames (field ignored in RX queue).
* @cw_min: The cw min value for outgoing frames (field ignored in RX queue).
@@ -476,6 +479,9 @@ struct data_queue {
unsigned short length;
unsigned short index[Q_INDEX_MAX];
+ unsigned short wd_count;
+ unsigned int wd_idx;
+
unsigned short txop;
unsigned short aifs;
unsigned short cw_min;
Add watchdog for rt2800 devices. For now it only detect hung and print error. [Note: I verified that printing messages from process context is fine on MT7620 (WT3020) platform that have problem when printk is called from interrupt context]. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> --- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 56 ++++++++++++++++++++++++ drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 2 + drivers/net/wireless/ralink/rt2x00/rt2800pci.c | 1 + drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 1 + drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 1 + drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 6 +++ 6 files changed, 67 insertions(+)