@@ -1274,6 +1274,31 @@ static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len)
return err;
}
+static int brcmf_set_sae_password(struct brcmf_if *ifp, const u8 *pwd_data,
+ u16 pwd_len)
+{
+ struct brcmf_pub *drvr = ifp->drvr;
+ struct brcmf_wsec_sae_pwd_le sae_pwd;
+ int err;
+
+ if (pwd_len > BRCMF_WSEC_MAX_SAE_PASSWORD_LEN) {
+ bphy_err(drvr, "sae_password must be less than %d\n",
+ BRCMF_WSEC_MAX_SAE_PASSWORD_LEN);
+ return -EINVAL;
+ }
+
+ sae_pwd.key_len = cpu_to_le16(pwd_len);
+ memcpy(sae_pwd.key, pwd_data, pwd_len);
+
+ err = brcmf_fil_iovar_data_set(ifp, "sae_password", &sae_pwd,
+ sizeof(sae_pwd));
+ if (err < 0)
+ bphy_err(drvr, "failed to set SAE password in firmware (len=%u)\n",
+ pwd_len);
+
+ return err;
+}
+
static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason)
{
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy);
@@ -1492,6 +1517,8 @@ static s32 brcmf_set_wpa_version(struct net_device *ndev,
val = WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED;
else if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_2)
val = WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED;
+ else if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_3)
+ val = WPA3_AUTH_SAE_PSK;
else
val = WPA_AUTH_DISABLED;
brcmf_dbg(CONN, "setting wpa_auth to 0x%0x\n", val);
@@ -1524,6 +1551,10 @@ static s32 brcmf_set_auth_type(struct net_device *ndev,
val = 1;
brcmf_dbg(CONN, "shared key\n");
break;
+ case NL80211_AUTHTYPE_SAE:
+ val = 3;
+ brcmf_dbg(CONN, "SAE authentication\n");
+ break;
default:
val = 2;
brcmf_dbg(CONN, "automatic, auth type (%d)\n", sme->auth_type);
@@ -1689,6 +1720,16 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
sme->crypto.cipher_group);
return -EINVAL;
}
+ } else if (val & WPA3_AUTH_SAE_PSK) {
+ switch (sme->crypto.akm_suites[0]) {
+ case WLAN_AKM_SUITE_SAE:
+ val = WPA3_AUTH_SAE_PSK;
+ break;
+ default:
+ bphy_err(drvr, "invalid cipher group (%d)\n",
+ sme->crypto.cipher_group);
+ return -EINVAL;
+ }
}
if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_1X)
@@ -1760,7 +1801,8 @@ brcmf_set_sharedkey(struct net_device *ndev,
brcmf_dbg(CONN, "wpa_versions 0x%x cipher_pairwise 0x%x\n",
sec->wpa_versions, sec->cipher_pairwise);
- if (sec->wpa_versions & (NL80211_WPA_VERSION_1 | NL80211_WPA_VERSION_2))
+ if (sec->wpa_versions & (NL80211_WPA_VERSION_1 | NL80211_WPA_VERSION_2 |
+ NL80211_WPA_VERSION_3))
return 0;
if (!(sec->cipher_pairwise &
@@ -1967,7 +2009,13 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
goto done;
}
- if (sme->crypto.psk) {
+ if (sme->crypto.sae_pwd) {
+ brcmf_dbg(INFO, "using SAE offload\n");
+ profile->use_fwsup = BRCMF_PROFILE_FWSUP_SAE;
+ }
+
+ if (sme->crypto.psk &&
+ profile->use_fwsup != BRCMF_PROFILE_FWSUP_SAE) {
if (WARN_ON(profile->use_fwsup != BRCMF_PROFILE_FWSUP_NONE)) {
err = -EINVAL;
goto done;
@@ -1985,12 +2033,23 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
}
}
- if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_PSK) {
+ if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_PSK)
err = brcmf_set_pmk(ifp, sme->crypto.psk,
BRCMF_WSEC_MAX_PSK_LEN);
- if (err)
+ else if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_SAE) {
+ /* clean up user-space RSNE */
+ if (brcmf_fil_iovar_data_set(ifp, "wpaie", NULL, 0)) {
+ bphy_err(drvr, "failed to clean up user-space RSNE\n");
goto done;
+ }
+ err = brcmf_set_sae_password(ifp, sme->crypto.sae_pwd,
+ sme->crypto.sae_pwd_len);
+ if (!err && sme->crypto.psk)
+ err = brcmf_set_pmk(ifp, sme->crypto.psk,
+ BRCMF_WSEC_MAX_PSK_LEN);
}
+ if (err)
+ goto done;
/* Join with specific BSSID and cached SSID
* If SSID is zero join based on BSSID only
@@ -5362,7 +5421,8 @@ static bool brcmf_is_linkup(struct brcmf_cfg80211_vif *vif,
if (event == BRCMF_E_SET_SSID && status == BRCMF_E_STATUS_SUCCESS) {
brcmf_dbg(CONN, "Processing set ssid\n");
memcpy(vif->profile.bssid, e->addr, ETH_ALEN);
- if (vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_PSK)
+ if (vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_PSK &&
+ vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_SAE)
return true;
set_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state);
@@ -6667,6 +6727,9 @@ static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK);
wiphy_ext_feature_set(wiphy,
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X);
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SAE))
+ wiphy_ext_feature_set(wiphy,
+ NL80211_EXT_FEATURE_SAE_OFFLOAD);
}
wiphy->mgmt_stypes = brcmf_txrx_stypes;
wiphy->max_remain_on_channel_duration = 5000;
@@ -118,7 +118,8 @@ struct brcmf_cfg80211_security {
enum brcmf_profile_fwsup {
BRCMF_PROFILE_FWSUP_NONE,
BRCMF_PROFILE_FWSUP_PSK,
- BRCMF_PROFILE_FWSUP_1X
+ BRCMF_PROFILE_FWSUP_1X,
+ BRCMF_PROFILE_FWSUP_SAE
};
/**
@@ -50,6 +50,7 @@ static const struct brcmf_feat_fwcap brcmf_fwcap_map[] = {
{ BRCMF_FEAT_P2P, "p2p" },
{ BRCMF_FEAT_MONITOR, "monitor" },
{ BRCMF_FEAT_MONITOR_FMT_RADIOTAP, "rtap" },
+ { BRCMF_FEAT_SAE, "sae" },
};
#ifdef DEBUG
@@ -36,6 +36,7 @@
* MONITOR: firmware can pass monitor packets to host.
* MONITOR_FMT_RADIOTAP: firmware provides monitor packets with radiotap header
* MONITOR_FMT_HW_RX_HDR: firmware provides monitor packets with hw/ucode header
+ * SAE: simultaneous authentication of equals
*/
#define BRCMF_FEAT_LIST \
BRCMF_FEAT_DEF(MBSS) \
@@ -54,7 +55,8 @@
BRCMF_FEAT_DEF(FWSUP) \
BRCMF_FEAT_DEF(MONITOR) \
BRCMF_FEAT_DEF(MONITOR_FMT_RADIOTAP) \
- BRCMF_FEAT_DEF(MONITOR_FMT_HW_RX_HDR)
+ BRCMF_FEAT_DEF(MONITOR_FMT_HW_RX_HDR) \
+ BRCMF_FEAT_DEF(SAE)
/*
* Quirks:
@@ -72,6 +72,8 @@
#define BRCMF_WSEC_MAX_PSK_LEN 32
#define BRCMF_WSEC_PASSPHRASE BIT(0)
+#define BRCMF_WSEC_MAX_SAE_PASSWORD_LEN 128
+
/* primary (ie tx) key */
#define BRCMF_PRIMARY_KEY (1 << 1)
#define DOT11_BSSTYPE_ANY 2
@@ -529,6 +531,17 @@ struct brcmf_wsec_pmk_le {
u8 key[2 * BRCMF_WSEC_MAX_PSK_LEN + 1];
};
+/**
+ * struct brcmf_wsec_sae_pwd_le - firmware SAE password material.
+ *
+ * @key_len: number of octets in key materials.
+ * @key: SAE password material.
+ */
+struct brcmf_wsec_sae_pwd_le {
+ __le16 key_len;
+ u8 key[BRCMF_WSEC_MAX_SAE_PASSWORD_LEN];
+};
+
/* Used to get specific STA parameters */
struct brcmf_scb_val_le {
__le32 val;
@@ -242,6 +242,8 @@ static inline bool ac_bitmap_tst(u8 bitmap, int prec)
#define WPA2_AUTH_FT 0x4000 /* Fast BSS Transition */
#define WPA2_AUTH_PSK_SHA256 0x8000 /* PSK with SHA256 key derivation */
+#define WPA3_AUTH_SAE_PSK 0x40000 /* SAE with 4-way handshake */
+
#define DOT11_DEFAULT_RTS_LEN 2347
#define DOT11_DEFAULT_FRAG_LEN 2346