| Message ID | 1568639388-27291-2-git-send-email-yiboz@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Johannes Berg |
| Headers | show |
| Series | [1/4] mac80211: Switch to a virtual time-based airtime scheduler | expand |
Yibo Zhao <yiboz@codeaurora.org> writes: > In a loop txqs dequeue scenario, if the first txq in the rbtree gets > removed from rbtree immediately in the ieee80211_return_txq(), the > loop will break soon in the ieee80211_next_txq() due to schedule_pos > not leading to the second txq in the rbtree. Thus, defering the > removal right before the end of this schedule round. > > Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> > Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> > Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> I didn't write this patch, so please don't use my sign-off. I'll add ack or review tags as appropriate in reply; but a few comments first: > --- > include/net/mac80211.h | 16 ++++++++++-- > net/mac80211/ieee80211_i.h | 3 +++ > net/mac80211/main.c | 6 +++++ > net/mac80211/tx.c | 63 +++++++++++++++++++++++++++++++++++++++++++--- > 4 files changed, 83 insertions(+), 5 deletions(-) > > diff --git a/include/net/mac80211.h b/include/net/mac80211.h > index ac2ed8e..ba5a345 100644 > --- a/include/net/mac80211.h > +++ b/include/net/mac80211.h > @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { > > #define IEEE80211_MAX_TX_RETRY 31 > > +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 > + > static inline void ieee80211_rate_set_vht(struct ieee80211_tx_rate *rate, > u8 mcs, u8 nss) > { > @@ -6232,7 +6234,8 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, > * @ac: AC number to return packets from. > * > * Should only be called between calls to ieee80211_txq_schedule_start() > - * and ieee80211_txq_schedule_end(). > + * and ieee80211_txq_schedule_end(). If the txq is empty, it will be added > + * to a remove list and get removed later. > * Returns the next txq if successful, %NULL if no queue is eligible. If a txq > * is returned, it should be returned with ieee80211_return_txq() after the > * driver has finished scheduling it. > @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac) > * @hw: pointer as obtained from ieee80211_alloc_hw() > * @ac: AC number to acquire locks for > * > - * Release locks previously acquired by ieee80211_txq_schedule_end(). > + * Release locks previously acquired by ieee80211_txq_schedule_end(). Check > + * and remove the empty txq from rb-tree. > */ > void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) > __releases(txq_lock); > @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq) > __acquires(txq_lock) __releases(txq_lock); > > /** > + * ieee80211_txqs_check - Check txqs waiting for removal > + * > + * @tmr: pointer as obtained from local > + * > + */ > +void ieee80211_txqs_check(struct timer_list *tmr); > + > +/** > * ieee80211_txq_may_transmit - check whether TXQ is allowed to transmit > * > * This function is used to check whether given txq is allowed to transmit by > diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h > index a4556f9..49aa143e 100644 > --- a/net/mac80211/ieee80211_i.h > +++ b/net/mac80211/ieee80211_i.h > @@ -847,6 +847,7 @@ struct txq_info { > struct codel_stats cstats; > struct sk_buff_head frags; > struct rb_node schedule_order; > + struct list_head candidate; > unsigned long flags; > > /* keep last! */ > @@ -1145,6 +1146,8 @@ struct ieee80211_local { > u64 airtime_v_t[IEEE80211_NUM_ACS]; > u64 airtime_weight_sum[IEEE80211_NUM_ACS]; > > + struct list_head remove_list[IEEE80211_NUM_ACS]; > + struct timer_list remove_timer; > u16 airtime_flags; > > const struct ieee80211_ops *ops; > diff --git a/net/mac80211/main.c b/net/mac80211/main.c > index e9ffa8e..78fe24a 100644 > --- a/net/mac80211/main.c > +++ b/net/mac80211/main.c > @@ -667,10 +667,15 @@ struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len, > > for (i = 0; i < IEEE80211_NUM_ACS; i++) { > local->active_txqs[i] = RB_ROOT_CACHED; > + INIT_LIST_HEAD(&local->remove_list[i]); > spin_lock_init(&local->active_txq_lock[i]); > } > local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; > > + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); > + mod_timer(&local->remove_timer, > + jiffies + msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); > + > INIT_LIST_HEAD(&local->chanctx_list); > mutex_init(&local->chanctx_mtx); > > @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) > tasklet_kill(&local->tx_pending_tasklet); > tasklet_kill(&local->tasklet); > > + del_timer_sync(&local->remove_timer); > #ifdef CONFIG_INET > unregister_inetaddr_notifier(&local->ifa_notifier); > #endif > diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c > index d00baaa..42ca010 100644 > --- a/net/mac80211/tx.c > +++ b/net/mac80211/tx.c > @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct ieee80211_sub_if_data *sdata, > codel_stats_init(&txqi->cstats); > __skb_queue_head_init(&txqi->frags); > RB_CLEAR_NODE(&txqi->schedule_order); > + INIT_LIST_HEAD(&txqi->candidate); > > txqi->txq.vif = &sdata->vif; > > @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct ieee80211_hw *hw, > > spin_lock_bh(&local->active_txq_lock[ac]); > > + if (!list_empty(&txqi->candidate)) > + list_del_init(&txqi->candidate); > + > if (!RB_EMPTY_NODE(&txqi->schedule_order)) > goto out; > > @@ -3783,6 +3787,20 @@ static void __ieee80211_unschedule_txq(struct ieee80211_hw *hw, > RB_CLEAR_NODE(&txqi->schedule_order); > } > > +void ieee80211_remove_txq(struct ieee80211_hw *hw, > + struct ieee80211_txq *txq) > +{ > + struct ieee80211_local *local = hw_to_local(hw); > + struct txq_info *txqi = to_txq_info(txq); > + > + lockdep_assert_held(&local->active_txq_lock[txq->ac]); > + > + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { > + __ieee80211_unschedule_txq(hw, txq); > + list_del_init(&txqi->candidate); > + } > +} > + > void ieee80211_unschedule_txq(struct ieee80211_hw *hw, > struct ieee80211_txq *txq) > __acquires(txq_lock) __releases(txq_lock) > @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct ieee80211_hw *hw, > struct ieee80211_local *local = hw_to_local(hw); > > spin_lock_bh(&local->active_txq_lock[txq->ac]); > - __ieee80211_unschedule_txq(hw, txq); > + ieee80211_remove_txq(hw, txq); > spin_unlock_bh(&local->active_txq_lock[txq->ac]); > } > > @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct ieee80211_hw *hw, > lockdep_assert_held(&local->active_txq_lock[txq->ac]); > > if (!RB_EMPTY_NODE(&txqi->schedule_order) && > - (skb_queue_empty(&txqi->frags) && !txqi->tin.backlog_packets)) > - __ieee80211_unschedule_txq(hw, txq); > + !txq_has_queue(&txqi->txq) && > + list_empty(&txqi->candidate)) > + list_add_tail(&txqi->candidate, &local->remove_list[txq->ac]); > + > } > EXPORT_SYMBOL(ieee80211_return_txq); > > +void __ieee80211_check_txqs(struct ieee80211_local *local, int ac) > +{ > + struct txq_info *iter, *tmp; > + struct sta_info *sta; > + > + lockdep_assert_held(&local->active_txq_lock[ac]); > + > + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], > + candidate) { > + sta = container_of(iter->txq.sta, struct sta_info, sta); > + > + if (txq_has_queue(&iter->txq)) > + list_del_init(&iter->candidate); > + else > + ieee80211_remove_txq(&local->hw, &iter->txq); > + } > +} > + > +void ieee80211_txqs_check(struct timer_list *t) > +{ > + struct ieee80211_local *local = from_timer(local, t, remove_timer); > + struct txq_info *iter, *tmp; > + struct sta_info *sta; > + int ac; > + > + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { > + spin_lock_bh(&local->active_txq_lock[ac]); > + __ieee80211_check_txqs(local, ac); > + spin_unlock_bh(&local->active_txq_lock[ac]); > + } > + > + mod_timer(&local->remove_timer, > + jiffies + msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); > +} I'll ask the same as I did last time (where you told me to hold off until this round): Why do you need the timer and the periodic check? If TXQs are added to the remove list during the scheduling run, and __ieee80211_check_txqs() is run from schedule_end(), isn't that sufficient to clear the list? -Toke
On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: > Yibo Zhao <yiboz@codeaurora.org> writes: > >> In a loop txqs dequeue scenario, if the first txq in the rbtree gets >> removed from rbtree immediately in the ieee80211_return_txq(), the >> loop will break soon in the ieee80211_next_txq() due to schedule_pos >> not leading to the second txq in the rbtree. Thus, defering the >> removal right before the end of this schedule round. >> >> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> > > I didn't write this patch, so please don't use my sign-off. I'll add > ack or review tags as appropriate in reply; but a few comments first: > >> --- >> include/net/mac80211.h | 16 ++++++++++-- >> net/mac80211/ieee80211_i.h | 3 +++ >> net/mac80211/main.c | 6 +++++ >> net/mac80211/tx.c | 63 >> +++++++++++++++++++++++++++++++++++++++++++--- >> 4 files changed, 83 insertions(+), 5 deletions(-) >> >> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >> index ac2ed8e..ba5a345 100644 >> --- a/include/net/mac80211.h >> +++ b/include/net/mac80211.h >> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >> >> #define IEEE80211_MAX_TX_RETRY 31 >> >> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >> + >> static inline void ieee80211_rate_set_vht(struct ieee80211_tx_rate >> *rate, >> u8 mcs, u8 nss) >> { >> @@ -6232,7 +6234,8 @@ struct sk_buff *ieee80211_tx_dequeue(struct >> ieee80211_hw *hw, >> * @ac: AC number to return packets from. >> * >> * Should only be called between calls to >> ieee80211_txq_schedule_start() >> - * and ieee80211_txq_schedule_end(). >> + * and ieee80211_txq_schedule_end(). If the txq is empty, it will be >> added >> + * to a remove list and get removed later. >> * Returns the next txq if successful, %NULL if no queue is eligible. >> If a txq >> * is returned, it should be returned with ieee80211_return_txq() >> after the >> * driver has finished scheduling it. >> @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct >> ieee80211_hw *hw, u8 ac) >> * @hw: pointer as obtained from ieee80211_alloc_hw() >> * @ac: AC number to acquire locks for >> * >> - * Release locks previously acquired by ieee80211_txq_schedule_end(). >> + * Release locks previously acquired by ieee80211_txq_schedule_end(). >> Check >> + * and remove the empty txq from rb-tree. >> */ >> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) >> __releases(txq_lock); >> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct ieee80211_hw >> *hw, struct ieee80211_txq *txq) >> __acquires(txq_lock) __releases(txq_lock); >> >> /** >> + * ieee80211_txqs_check - Check txqs waiting for removal >> + * >> + * @tmr: pointer as obtained from local >> + * >> + */ >> +void ieee80211_txqs_check(struct timer_list *tmr); >> + >> +/** >> * ieee80211_txq_may_transmit - check whether TXQ is allowed to >> transmit >> * >> * This function is used to check whether given txq is allowed to >> transmit by >> diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h >> index a4556f9..49aa143e 100644 >> --- a/net/mac80211/ieee80211_i.h >> +++ b/net/mac80211/ieee80211_i.h >> @@ -847,6 +847,7 @@ struct txq_info { >> struct codel_stats cstats; >> struct sk_buff_head frags; >> struct rb_node schedule_order; >> + struct list_head candidate; >> unsigned long flags; >> >> /* keep last! */ >> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >> u64 airtime_v_t[IEEE80211_NUM_ACS]; >> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >> >> + struct list_head remove_list[IEEE80211_NUM_ACS]; >> + struct timer_list remove_timer; >> u16 airtime_flags; >> >> const struct ieee80211_ops *ops; >> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >> index e9ffa8e..78fe24a 100644 >> --- a/net/mac80211/main.c >> +++ b/net/mac80211/main.c >> @@ -667,10 +667,15 @@ struct ieee80211_hw >> *ieee80211_alloc_hw_nm(size_t priv_data_len, >> >> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >> local->active_txqs[i] = RB_ROOT_CACHED; >> + INIT_LIST_HEAD(&local->remove_list[i]); >> spin_lock_init(&local->active_txq_lock[i]); >> } >> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >> >> + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); >> + mod_timer(&local->remove_timer, >> + jiffies + >> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >> + >> INIT_LIST_HEAD(&local->chanctx_list); >> mutex_init(&local->chanctx_mtx); >> >> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw >> *hw) >> tasklet_kill(&local->tx_pending_tasklet); >> tasklet_kill(&local->tasklet); >> >> + del_timer_sync(&local->remove_timer); >> #ifdef CONFIG_INET >> unregister_inetaddr_notifier(&local->ifa_notifier); >> #endif >> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >> index d00baaa..42ca010 100644 >> --- a/net/mac80211/tx.c >> +++ b/net/mac80211/tx.c >> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >> ieee80211_sub_if_data *sdata, >> codel_stats_init(&txqi->cstats); >> __skb_queue_head_init(&txqi->frags); >> RB_CLEAR_NODE(&txqi->schedule_order); >> + INIT_LIST_HEAD(&txqi->candidate); >> >> txqi->txq.vif = &sdata->vif; >> >> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct ieee80211_hw >> *hw, >> >> spin_lock_bh(&local->active_txq_lock[ac]); >> >> + if (!list_empty(&txqi->candidate)) >> + list_del_init(&txqi->candidate); >> + >> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >> goto out; >> >> @@ -3783,6 +3787,20 @@ static void __ieee80211_unschedule_txq(struct >> ieee80211_hw *hw, >> RB_CLEAR_NODE(&txqi->schedule_order); >> } >> >> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >> + struct ieee80211_txq *txq) >> +{ >> + struct ieee80211_local *local = hw_to_local(hw); >> + struct txq_info *txqi = to_txq_info(txq); >> + >> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >> + >> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >> + __ieee80211_unschedule_txq(hw, txq); >> + list_del_init(&txqi->candidate); >> + } >> +} >> + >> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >> struct ieee80211_txq *txq) >> __acquires(txq_lock) __releases(txq_lock) >> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >> ieee80211_hw *hw, >> struct ieee80211_local *local = hw_to_local(hw); >> >> spin_lock_bh(&local->active_txq_lock[txq->ac]); >> - __ieee80211_unschedule_txq(hw, txq); >> + ieee80211_remove_txq(hw, txq); >> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >> } >> >> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct ieee80211_hw >> *hw, >> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >> >> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >> - (skb_queue_empty(&txqi->frags) && !txqi->tin.backlog_packets)) >> - __ieee80211_unschedule_txq(hw, txq); >> + !txq_has_queue(&txqi->txq) && >> + list_empty(&txqi->candidate)) >> + list_add_tail(&txqi->candidate, &local->remove_list[txq->ac]); >> + >> } >> EXPORT_SYMBOL(ieee80211_return_txq); >> >> +void __ieee80211_check_txqs(struct ieee80211_local *local, int ac) >> +{ >> + struct txq_info *iter, *tmp; >> + struct sta_info *sta; >> + >> + lockdep_assert_held(&local->active_txq_lock[ac]); >> + >> + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], >> + candidate) { >> + sta = container_of(iter->txq.sta, struct sta_info, sta); >> + >> + if (txq_has_queue(&iter->txq)) >> + list_del_init(&iter->candidate); >> + else >> + ieee80211_remove_txq(&local->hw, &iter->txq); >> + } >> +} >> + >> +void ieee80211_txqs_check(struct timer_list *t) >> +{ >> + struct ieee80211_local *local = from_timer(local, t, remove_timer); >> + struct txq_info *iter, *tmp; >> + struct sta_info *sta; >> + int ac; >> + >> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >> + spin_lock_bh(&local->active_txq_lock[ac]); >> + __ieee80211_check_txqs(local, ac); >> + spin_unlock_bh(&local->active_txq_lock[ac]); >> + } >> + >> + mod_timer(&local->remove_timer, >> + jiffies + >> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >> +} > > I'll ask the same as I did last time (where you told me to hold off > until this round): > > Why do you need the timer and the periodic check? If TXQs are added to > the remove list during the scheduling run, and __ieee80211_check_txqs() > is run from schedule_end(), isn't that sufficient to clear the list? Is it possible that a txq is not added to the remove list but then packets in it are dropped by fq_codel algo? Like the station disconnects without any notification. > > -Toke
Yibo Zhao <yiboz@codeaurora.org> writes: > On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >> Yibo Zhao <yiboz@codeaurora.org> writes: >> >>> In a loop txqs dequeue scenario, if the first txq in the rbtree gets >>> removed from rbtree immediately in the ieee80211_return_txq(), the >>> loop will break soon in the ieee80211_next_txq() due to schedule_pos >>> not leading to the second txq in the rbtree. Thus, defering the >>> removal right before the end of this schedule round. >>> >>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >> >> I didn't write this patch, so please don't use my sign-off. I'll add >> ack or review tags as appropriate in reply; but a few comments first: >> >>> --- >>> include/net/mac80211.h | 16 ++++++++++-- >>> net/mac80211/ieee80211_i.h | 3 +++ >>> net/mac80211/main.c | 6 +++++ >>> net/mac80211/tx.c | 63 >>> +++++++++++++++++++++++++++++++++++++++++++--- >>> 4 files changed, 83 insertions(+), 5 deletions(-) >>> >>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>> index ac2ed8e..ba5a345 100644 >>> --- a/include/net/mac80211.h >>> +++ b/include/net/mac80211.h >>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>> >>> #define IEEE80211_MAX_TX_RETRY 31 >>> >>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>> + >>> static inline void ieee80211_rate_set_vht(struct ieee80211_tx_rate >>> *rate, >>> u8 mcs, u8 nss) >>> { >>> @@ -6232,7 +6234,8 @@ struct sk_buff *ieee80211_tx_dequeue(struct >>> ieee80211_hw *hw, >>> * @ac: AC number to return packets from. >>> * >>> * Should only be called between calls to >>> ieee80211_txq_schedule_start() >>> - * and ieee80211_txq_schedule_end(). >>> + * and ieee80211_txq_schedule_end(). If the txq is empty, it will be >>> added >>> + * to a remove list and get removed later. >>> * Returns the next txq if successful, %NULL if no queue is eligible. >>> If a txq >>> * is returned, it should be returned with ieee80211_return_txq() >>> after the >>> * driver has finished scheduling it. >>> @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct >>> ieee80211_hw *hw, u8 ac) >>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>> * @ac: AC number to acquire locks for >>> * >>> - * Release locks previously acquired by ieee80211_txq_schedule_end(). >>> + * Release locks previously acquired by ieee80211_txq_schedule_end(). >>> Check >>> + * and remove the empty txq from rb-tree. >>> */ >>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) >>> __releases(txq_lock); >>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct ieee80211_hw >>> *hw, struct ieee80211_txq *txq) >>> __acquires(txq_lock) __releases(txq_lock); >>> >>> /** >>> + * ieee80211_txqs_check - Check txqs waiting for removal >>> + * >>> + * @tmr: pointer as obtained from local >>> + * >>> + */ >>> +void ieee80211_txqs_check(struct timer_list *tmr); >>> + >>> +/** >>> * ieee80211_txq_may_transmit - check whether TXQ is allowed to >>> transmit >>> * >>> * This function is used to check whether given txq is allowed to >>> transmit by >>> diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h >>> index a4556f9..49aa143e 100644 >>> --- a/net/mac80211/ieee80211_i.h >>> +++ b/net/mac80211/ieee80211_i.h >>> @@ -847,6 +847,7 @@ struct txq_info { >>> struct codel_stats cstats; >>> struct sk_buff_head frags; >>> struct rb_node schedule_order; >>> + struct list_head candidate; >>> unsigned long flags; >>> >>> /* keep last! */ >>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>> >>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>> + struct timer_list remove_timer; >>> u16 airtime_flags; >>> >>> const struct ieee80211_ops *ops; >>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>> index e9ffa8e..78fe24a 100644 >>> --- a/net/mac80211/main.c >>> +++ b/net/mac80211/main.c >>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>> >>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>> local->active_txqs[i] = RB_ROOT_CACHED; >>> + INIT_LIST_HEAD(&local->remove_list[i]); >>> spin_lock_init(&local->active_txq_lock[i]); >>> } >>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>> >>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); >>> + mod_timer(&local->remove_timer, >>> + jiffies + >>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>> + >>> INIT_LIST_HEAD(&local->chanctx_list); >>> mutex_init(&local->chanctx_mtx); >>> >>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw >>> *hw) >>> tasklet_kill(&local->tx_pending_tasklet); >>> tasklet_kill(&local->tasklet); >>> >>> + del_timer_sync(&local->remove_timer); >>> #ifdef CONFIG_INET >>> unregister_inetaddr_notifier(&local->ifa_notifier); >>> #endif >>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>> index d00baaa..42ca010 100644 >>> --- a/net/mac80211/tx.c >>> +++ b/net/mac80211/tx.c >>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>> ieee80211_sub_if_data *sdata, >>> codel_stats_init(&txqi->cstats); >>> __skb_queue_head_init(&txqi->frags); >>> RB_CLEAR_NODE(&txqi->schedule_order); >>> + INIT_LIST_HEAD(&txqi->candidate); >>> >>> txqi->txq.vif = &sdata->vif; >>> >>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct ieee80211_hw >>> *hw, >>> >>> spin_lock_bh(&local->active_txq_lock[ac]); >>> >>> + if (!list_empty(&txqi->candidate)) >>> + list_del_init(&txqi->candidate); >>> + >>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>> goto out; >>> >>> @@ -3783,6 +3787,20 @@ static void __ieee80211_unschedule_txq(struct >>> ieee80211_hw *hw, >>> RB_CLEAR_NODE(&txqi->schedule_order); >>> } >>> >>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>> + struct ieee80211_txq *txq) >>> +{ >>> + struct ieee80211_local *local = hw_to_local(hw); >>> + struct txq_info *txqi = to_txq_info(txq); >>> + >>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>> + >>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>> + __ieee80211_unschedule_txq(hw, txq); >>> + list_del_init(&txqi->candidate); >>> + } >>> +} >>> + >>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>> struct ieee80211_txq *txq) >>> __acquires(txq_lock) __releases(txq_lock) >>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>> ieee80211_hw *hw, >>> struct ieee80211_local *local = hw_to_local(hw); >>> >>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>> - __ieee80211_unschedule_txq(hw, txq); >>> + ieee80211_remove_txq(hw, txq); >>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>> } >>> >>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct ieee80211_hw >>> *hw, >>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>> >>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>> - (skb_queue_empty(&txqi->frags) && !txqi->tin.backlog_packets)) >>> - __ieee80211_unschedule_txq(hw, txq); >>> + !txq_has_queue(&txqi->txq) && >>> + list_empty(&txqi->candidate)) >>> + list_add_tail(&txqi->candidate, &local->remove_list[txq->ac]); >>> + >>> } >>> EXPORT_SYMBOL(ieee80211_return_txq); >>> >>> +void __ieee80211_check_txqs(struct ieee80211_local *local, int ac) >>> +{ >>> + struct txq_info *iter, *tmp; >>> + struct sta_info *sta; >>> + >>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>> + >>> + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], >>> + candidate) { >>> + sta = container_of(iter->txq.sta, struct sta_info, sta); >>> + >>> + if (txq_has_queue(&iter->txq)) >>> + list_del_init(&iter->candidate); >>> + else >>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>> + } >>> +} >>> + >>> +void ieee80211_txqs_check(struct timer_list *t) >>> +{ >>> + struct ieee80211_local *local = from_timer(local, t, remove_timer); >>> + struct txq_info *iter, *tmp; >>> + struct sta_info *sta; >>> + int ac; >>> + >>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>> + spin_lock_bh(&local->active_txq_lock[ac]); >>> + __ieee80211_check_txqs(local, ac); >>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>> + } >>> + >>> + mod_timer(&local->remove_timer, >>> + jiffies + >>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>> +} >> >> I'll ask the same as I did last time (where you told me to hold off >> until this round): >> >> Why do you need the timer and the periodic check? If TXQs are added to >> the remove list during the scheduling run, and __ieee80211_check_txqs() >> is run from schedule_end(), isn't that sufficient to clear the list? > Is it possible that a txq is not added to the remove list but then > packets in it are dropped by fq_codel algo? Like the station disconnects > without any notification. Well as long as all the other cleanup paths call directly into __unschedule_txq(), that should remove stations from the scheduler when they disconnect etc. We only need to defer removal inside a single "scheduling round" (i.e., between a pair of ieee80211_txq_schedule_start/end. So if we just walk the remove list in schedule_end() we should be enough, no? Hmm, or maybe a simpler way to fix the original issue is just to have unschedule_txq() update the schedule_pos() pointer? I.e., unschedule_txq checks if the txq being removed is currently being pointed to by schedule_pos[ac], and if it is, it updates schedule_pos to be the rb_next of the current value? -Toke
On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: > Yibo Zhao <yiboz@codeaurora.org> writes: > >> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>> Yibo Zhao <yiboz@codeaurora.org> writes: >>> >>>> In a loop txqs dequeue scenario, if the first txq in the rbtree gets >>>> removed from rbtree immediately in the ieee80211_return_txq(), the >>>> loop will break soon in the ieee80211_next_txq() due to schedule_pos >>>> not leading to the second txq in the rbtree. Thus, defering the >>>> removal right before the end of this schedule round. >>>> >>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>> >>> I didn't write this patch, so please don't use my sign-off. I'll add >>> ack or review tags as appropriate in reply; but a few comments first: >>> >>>> --- >>>> include/net/mac80211.h | 16 ++++++++++-- >>>> net/mac80211/ieee80211_i.h | 3 +++ >>>> net/mac80211/main.c | 6 +++++ >>>> net/mac80211/tx.c | 63 >>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>> >>>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>>> index ac2ed8e..ba5a345 100644 >>>> --- a/include/net/mac80211.h >>>> +++ b/include/net/mac80211.h >>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>> >>>> #define IEEE80211_MAX_TX_RETRY 31 >>>> >>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>> + >>>> static inline void ieee80211_rate_set_vht(struct ieee80211_tx_rate >>>> *rate, >>>> u8 mcs, u8 nss) >>>> { >>>> @@ -6232,7 +6234,8 @@ struct sk_buff *ieee80211_tx_dequeue(struct >>>> ieee80211_hw *hw, >>>> * @ac: AC number to return packets from. >>>> * >>>> * Should only be called between calls to >>>> ieee80211_txq_schedule_start() >>>> - * and ieee80211_txq_schedule_end(). >>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, it will >>>> be >>>> added >>>> + * to a remove list and get removed later. >>>> * Returns the next txq if successful, %NULL if no queue is >>>> eligible. >>>> If a txq >>>> * is returned, it should be returned with ieee80211_return_txq() >>>> after the >>>> * driver has finished scheduling it. >>>> @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct >>>> ieee80211_hw *hw, u8 ac) >>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>> * @ac: AC number to acquire locks for >>>> * >>>> - * Release locks previously acquired by >>>> ieee80211_txq_schedule_end(). >>>> + * Release locks previously acquired by >>>> ieee80211_txq_schedule_end(). >>>> Check >>>> + * and remove the empty txq from rb-tree. >>>> */ >>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) >>>> __releases(txq_lock); >>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>> ieee80211_hw >>>> *hw, struct ieee80211_txq *txq) >>>> __acquires(txq_lock) __releases(txq_lock); >>>> >>>> /** >>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>> + * >>>> + * @tmr: pointer as obtained from local >>>> + * >>>> + */ >>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>> + >>>> +/** >>>> * ieee80211_txq_may_transmit - check whether TXQ is allowed to >>>> transmit >>>> * >>>> * This function is used to check whether given txq is allowed to >>>> transmit by >>>> diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h >>>> index a4556f9..49aa143e 100644 >>>> --- a/net/mac80211/ieee80211_i.h >>>> +++ b/net/mac80211/ieee80211_i.h >>>> @@ -847,6 +847,7 @@ struct txq_info { >>>> struct codel_stats cstats; >>>> struct sk_buff_head frags; >>>> struct rb_node schedule_order; >>>> + struct list_head candidate; >>>> unsigned long flags; >>>> >>>> /* keep last! */ >>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>> >>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>> + struct timer_list remove_timer; >>>> u16 airtime_flags; >>>> >>>> const struct ieee80211_ops *ops; >>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>> index e9ffa8e..78fe24a 100644 >>>> --- a/net/mac80211/main.c >>>> +++ b/net/mac80211/main.c >>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>> >>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>> spin_lock_init(&local->active_txq_lock[i]); >>>> } >>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>> >>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); >>>> + mod_timer(&local->remove_timer, >>>> + jiffies + >>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>> + >>>> INIT_LIST_HEAD(&local->chanctx_list); >>>> mutex_init(&local->chanctx_mtx); >>>> >>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>> ieee80211_hw >>>> *hw) >>>> tasklet_kill(&local->tx_pending_tasklet); >>>> tasklet_kill(&local->tasklet); >>>> >>>> + del_timer_sync(&local->remove_timer); >>>> #ifdef CONFIG_INET >>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>> #endif >>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>> index d00baaa..42ca010 100644 >>>> --- a/net/mac80211/tx.c >>>> +++ b/net/mac80211/tx.c >>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>> ieee80211_sub_if_data *sdata, >>>> codel_stats_init(&txqi->cstats); >>>> __skb_queue_head_init(&txqi->frags); >>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>> + INIT_LIST_HEAD(&txqi->candidate); >>>> >>>> txqi->txq.vif = &sdata->vif; >>>> >>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>> ieee80211_hw >>>> *hw, >>>> >>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>> >>>> + if (!list_empty(&txqi->candidate)) >>>> + list_del_init(&txqi->candidate); >>>> + >>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>> goto out; >>>> >>>> @@ -3783,6 +3787,20 @@ static void __ieee80211_unschedule_txq(struct >>>> ieee80211_hw *hw, >>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>> } >>>> >>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>> + struct ieee80211_txq *txq) >>>> +{ >>>> + struct ieee80211_local *local = hw_to_local(hw); >>>> + struct txq_info *txqi = to_txq_info(txq); >>>> + >>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>> + >>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>> + __ieee80211_unschedule_txq(hw, txq); >>>> + list_del_init(&txqi->candidate); >>>> + } >>>> +} >>>> + >>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>> struct ieee80211_txq *txq) >>>> __acquires(txq_lock) __releases(txq_lock) >>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>> ieee80211_hw *hw, >>>> struct ieee80211_local *local = hw_to_local(hw); >>>> >>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>> - __ieee80211_unschedule_txq(hw, txq); >>>> + ieee80211_remove_txq(hw, txq); >>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>> } >>>> >>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>> ieee80211_hw >>>> *hw, >>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>> >>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>> - (skb_queue_empty(&txqi->frags) && !txqi->tin.backlog_packets)) >>>> - __ieee80211_unschedule_txq(hw, txq); >>>> + !txq_has_queue(&txqi->txq) && >>>> + list_empty(&txqi->candidate)) >>>> + list_add_tail(&txqi->candidate, &local->remove_list[txq->ac]); >>>> + >>>> } >>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>> >>>> +void __ieee80211_check_txqs(struct ieee80211_local *local, int ac) >>>> +{ >>>> + struct txq_info *iter, *tmp; >>>> + struct sta_info *sta; >>>> + >>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>> + >>>> + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], >>>> + candidate) { >>>> + sta = container_of(iter->txq.sta, struct sta_info, sta); >>>> + >>>> + if (txq_has_queue(&iter->txq)) >>>> + list_del_init(&iter->candidate); >>>> + else >>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>> + } >>>> +} >>>> + >>>> +void ieee80211_txqs_check(struct timer_list *t) >>>> +{ >>>> + struct ieee80211_local *local = from_timer(local, t, >>>> remove_timer); >>>> + struct txq_info *iter, *tmp; >>>> + struct sta_info *sta; >>>> + int ac; >>>> + >>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>> + __ieee80211_check_txqs(local, ac); >>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>> + } >>>> + >>>> + mod_timer(&local->remove_timer, >>>> + jiffies + >>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>> +} >>> >>> I'll ask the same as I did last time (where you told me to hold off >>> until this round): >>> >>> Why do you need the timer and the periodic check? If TXQs are added >>> to >>> the remove list during the scheduling run, and >>> __ieee80211_check_txqs() >>> is run from schedule_end(), isn't that sufficient to clear the list? >> Is it possible that a txq is not added to the remove list but then >> packets in it are dropped by fq_codel algo? Like the station >> disconnects >> without any notification. > > Well as long as all the other cleanup paths call directly into > __unschedule_txq(), that should remove stations from the scheduler when > they disconnect etc. Yes, the disconnect scenario is a bad example. My concern is, say, we have 10 stations and only one of them is assigned a very small weight compared with that of others. Suppose, after its chance of Tx, it is most likely to be placed in the rightmost(still has some packets in the txq) and no more incoming data for it. The remaining packets in txq will be dropped due to timeout algo in codel(correct me if I am wrong) but this empty txq will stay on the rbtree until other txqs get drained or global vt catch up with its vt. The staying time could be long if weight is extremely small. Then do we need timer to check or any other better solution? > > We only need to defer removal inside a single "scheduling round" (i.e., > between a pair of ieee80211_txq_schedule_start/end. So if we just walk > the remove list in schedule_end() we should be enough, no? > > Hmm, or maybe a simpler way to fix the original issue is just to have > unschedule_txq() update the schedule_pos() pointer? > > I.e., unschedule_txq checks if the txq being removed is currently being > pointed to by schedule_pos[ac], and if it is, it updates schedule_pos > to > be the rb_next of the current value? Actually, if schedule_pos is updated to rb_next of the current value, then in the next_txq() where we are going to use rb_next again and finally pick the next node of the node we really want. Is it fine to update schedule_pos to NULL? > > -Toke
Yibo Zhao <yiboz@codeaurora.org> writes: > On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >> Yibo Zhao <yiboz@codeaurora.org> writes: >> >>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>> >>>>> In a loop txqs dequeue scenario, if the first txq in the rbtree gets >>>>> removed from rbtree immediately in the ieee80211_return_txq(), the >>>>> loop will break soon in the ieee80211_next_txq() due to schedule_pos >>>>> not leading to the second txq in the rbtree. Thus, defering the >>>>> removal right before the end of this schedule round. >>>>> >>>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>>> >>>> I didn't write this patch, so please don't use my sign-off. I'll add >>>> ack or review tags as appropriate in reply; but a few comments first: >>>> >>>>> --- >>>>> include/net/mac80211.h | 16 ++++++++++-- >>>>> net/mac80211/ieee80211_i.h | 3 +++ >>>>> net/mac80211/main.c | 6 +++++ >>>>> net/mac80211/tx.c | 63 >>>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>>> >>>>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>>>> index ac2ed8e..ba5a345 100644 >>>>> --- a/include/net/mac80211.h >>>>> +++ b/include/net/mac80211.h >>>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>>> >>>>> #define IEEE80211_MAX_TX_RETRY 31 >>>>> >>>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>>> + >>>>> static inline void ieee80211_rate_set_vht(struct ieee80211_tx_rate >>>>> *rate, >>>>> u8 mcs, u8 nss) >>>>> { >>>>> @@ -6232,7 +6234,8 @@ struct sk_buff *ieee80211_tx_dequeue(struct >>>>> ieee80211_hw *hw, >>>>> * @ac: AC number to return packets from. >>>>> * >>>>> * Should only be called between calls to >>>>> ieee80211_txq_schedule_start() >>>>> - * and ieee80211_txq_schedule_end(). >>>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, it will >>>>> be >>>>> added >>>>> + * to a remove list and get removed later. >>>>> * Returns the next txq if successful, %NULL if no queue is >>>>> eligible. >>>>> If a txq >>>>> * is returned, it should be returned with ieee80211_return_txq() >>>>> after the >>>>> * driver has finished scheduling it. >>>>> @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct >>>>> ieee80211_hw *hw, u8 ac) >>>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>>> * @ac: AC number to acquire locks for >>>>> * >>>>> - * Release locks previously acquired by >>>>> ieee80211_txq_schedule_end(). >>>>> + * Release locks previously acquired by >>>>> ieee80211_txq_schedule_end(). >>>>> Check >>>>> + * and remove the empty txq from rb-tree. >>>>> */ >>>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) >>>>> __releases(txq_lock); >>>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>>> ieee80211_hw >>>>> *hw, struct ieee80211_txq *txq) >>>>> __acquires(txq_lock) __releases(txq_lock); >>>>> >>>>> /** >>>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>>> + * >>>>> + * @tmr: pointer as obtained from local >>>>> + * >>>>> + */ >>>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>>> + >>>>> +/** >>>>> * ieee80211_txq_may_transmit - check whether TXQ is allowed to >>>>> transmit >>>>> * >>>>> * This function is used to check whether given txq is allowed to >>>>> transmit by >>>>> diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h >>>>> index a4556f9..49aa143e 100644 >>>>> --- a/net/mac80211/ieee80211_i.h >>>>> +++ b/net/mac80211/ieee80211_i.h >>>>> @@ -847,6 +847,7 @@ struct txq_info { >>>>> struct codel_stats cstats; >>>>> struct sk_buff_head frags; >>>>> struct rb_node schedule_order; >>>>> + struct list_head candidate; >>>>> unsigned long flags; >>>>> >>>>> /* keep last! */ >>>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>>> >>>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>>> + struct timer_list remove_timer; >>>>> u16 airtime_flags; >>>>> >>>>> const struct ieee80211_ops *ops; >>>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>>> index e9ffa8e..78fe24a 100644 >>>>> --- a/net/mac80211/main.c >>>>> +++ b/net/mac80211/main.c >>>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>>> >>>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>>> spin_lock_init(&local->active_txq_lock[i]); >>>>> } >>>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>>> >>>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); >>>>> + mod_timer(&local->remove_timer, >>>>> + jiffies + >>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>> + >>>>> INIT_LIST_HEAD(&local->chanctx_list); >>>>> mutex_init(&local->chanctx_mtx); >>>>> >>>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>>> ieee80211_hw >>>>> *hw) >>>>> tasklet_kill(&local->tx_pending_tasklet); >>>>> tasklet_kill(&local->tasklet); >>>>> >>>>> + del_timer_sync(&local->remove_timer); >>>>> #ifdef CONFIG_INET >>>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>>> #endif >>>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>>> index d00baaa..42ca010 100644 >>>>> --- a/net/mac80211/tx.c >>>>> +++ b/net/mac80211/tx.c >>>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>>> ieee80211_sub_if_data *sdata, >>>>> codel_stats_init(&txqi->cstats); >>>>> __skb_queue_head_init(&txqi->frags); >>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>> + INIT_LIST_HEAD(&txqi->candidate); >>>>> >>>>> txqi->txq.vif = &sdata->vif; >>>>> >>>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>>> ieee80211_hw >>>>> *hw, >>>>> >>>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>>> >>>>> + if (!list_empty(&txqi->candidate)) >>>>> + list_del_init(&txqi->candidate); >>>>> + >>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>>> goto out; >>>>> >>>>> @@ -3783,6 +3787,20 @@ static void __ieee80211_unschedule_txq(struct >>>>> ieee80211_hw *hw, >>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>> } >>>>> >>>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>>> + struct ieee80211_txq *txq) >>>>> +{ >>>>> + struct ieee80211_local *local = hw_to_local(hw); >>>>> + struct txq_info *txqi = to_txq_info(txq); >>>>> + >>>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>> + >>>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>>> + __ieee80211_unschedule_txq(hw, txq); >>>>> + list_del_init(&txqi->candidate); >>>>> + } >>>>> +} >>>>> + >>>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>>> struct ieee80211_txq *txq) >>>>> __acquires(txq_lock) __releases(txq_lock) >>>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>>> ieee80211_hw *hw, >>>>> struct ieee80211_local *local = hw_to_local(hw); >>>>> >>>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>> + ieee80211_remove_txq(hw, txq); >>>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>>> } >>>>> >>>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>>> ieee80211_hw >>>>> *hw, >>>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>> >>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>>> - (skb_queue_empty(&txqi->frags) && !txqi->tin.backlog_packets)) >>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>> + !txq_has_queue(&txqi->txq) && >>>>> + list_empty(&txqi->candidate)) >>>>> + list_add_tail(&txqi->candidate, &local->remove_list[txq->ac]); >>>>> + >>>>> } >>>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>>> >>>>> +void __ieee80211_check_txqs(struct ieee80211_local *local, int ac) >>>>> +{ >>>>> + struct txq_info *iter, *tmp; >>>>> + struct sta_info *sta; >>>>> + >>>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>>> + >>>>> + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], >>>>> + candidate) { >>>>> + sta = container_of(iter->txq.sta, struct sta_info, sta); >>>>> + >>>>> + if (txq_has_queue(&iter->txq)) >>>>> + list_del_init(&iter->candidate); >>>>> + else >>>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>>> + } >>>>> +} >>>>> + >>>>> +void ieee80211_txqs_check(struct timer_list *t) >>>>> +{ >>>>> + struct ieee80211_local *local = from_timer(local, t, >>>>> remove_timer); >>>>> + struct txq_info *iter, *tmp; >>>>> + struct sta_info *sta; >>>>> + int ac; >>>>> + >>>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>>> + __ieee80211_check_txqs(local, ac); >>>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>>> + } >>>>> + >>>>> + mod_timer(&local->remove_timer, >>>>> + jiffies + >>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>> +} >>>> >>>> I'll ask the same as I did last time (where you told me to hold off >>>> until this round): >>>> >>>> Why do you need the timer and the periodic check? If TXQs are added >>>> to >>>> the remove list during the scheduling run, and >>>> __ieee80211_check_txqs() >>>> is run from schedule_end(), isn't that sufficient to clear the list? >>> Is it possible that a txq is not added to the remove list but then >>> packets in it are dropped by fq_codel algo? Like the station >>> disconnects >>> without any notification. >> >> Well as long as all the other cleanup paths call directly into >> __unschedule_txq(), that should remove stations from the scheduler when >> they disconnect etc. > Yes, the disconnect scenario is a bad example. My concern is, say, we > have 10 stations and only one of them is assigned a very small weight > compared with that of others. Suppose, after its chance of Tx, it is > most likely to be placed in the rightmost(still has some packets in the > txq) and no more incoming data for it. The remaining packets in txq will > be dropped due to timeout algo in codel(correct me if I am wrong) but > this empty txq will stay on the rbtree until other txqs get drained or > global vt catch up with its vt. The staying time could be long if weight > is extremely small. Then do we need timer to check or any other better > solution? Ah, I see what you mean. No, I don't think this will be a problem; the scenario you're describing would play out like this: 1. Station ends transmitting, still has a single packet queued, gets moved to the end of the rbtree (and stays there for a while). 2. When we finally get to the point where this station gets another chance to transmit, the CoDel drop timer triggers and the last packet is dropped[0]. This means that the queue will just be empty (and ieee80211_tx_dequeue() will return NULL). 3. Because the queue is empty, ieee80211_return_txq() will not put it back on the rbtree. Crucially, in 2. the CoDel algorithm doesn't kick in until the point of packet dequeue. But even if an empty queue stays on the rbtree for a while, there is no harm in that: eventually it will get its turn, it will turn out to be empty, and just be skipped over. The issue we need to be concerned about is the opposite: If we have a queue that *does* have packets queued, but which is *not* scheduled for transmission, that will stall TX. [0] CoDel in most cases only drops a single packet at a time, so it will not clear out an entire queue with multiple packets in one go. But you are right that it could conceivably drop the last packet in a queue. >> We only need to defer removal inside a single "scheduling round" (i.e., >> between a pair of ieee80211_txq_schedule_start/end. So if we just walk >> the remove list in schedule_end() we should be enough, no? >> >> Hmm, or maybe a simpler way to fix the original issue is just to have >> unschedule_txq() update the schedule_pos() pointer? >> >> I.e., unschedule_txq checks if the txq being removed is currently being >> pointed to by schedule_pos[ac], and if it is, it updates schedule_pos >> to >> be the rb_next of the current value? > Actually, if schedule_pos is updated to rb_next of the current value, > then in the next_txq() where we are going to use rb_next again and > finally pick the next node of the node we really want. Is it fine to > update schedule_pos to NULL? Hmm, yeah, good point. If we do end up setting schedule_pos to NULL in the middle of a scheduling round, that will make next_txq() "start over", and do another loop through the whole thing. I guess we may be able hit a case where things can oscillate back and forth between addition and removal resulting in an infinite loop? Not sure, but at least I can't seem to convince myself that this can't happen. But in that case, we could fix it by just conditionally assigning either rb_next or rb_prev to the schedule_pos in unschedule_txq()? I.e., something like: local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); -Toke
On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: > Yibo Zhao <yiboz@codeaurora.org> writes: > >> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>> Yibo Zhao <yiboz@codeaurora.org> writes: >>> >>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>> >>>>>> In a loop txqs dequeue scenario, if the first txq in the rbtree >>>>>> gets >>>>>> removed from rbtree immediately in the ieee80211_return_txq(), the >>>>>> loop will break soon in the ieee80211_next_txq() due to >>>>>> schedule_pos >>>>>> not leading to the second txq in the rbtree. Thus, defering the >>>>>> removal right before the end of this schedule round. >>>>>> >>>>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>>>> >>>>> I didn't write this patch, so please don't use my sign-off. I'll >>>>> add >>>>> ack or review tags as appropriate in reply; but a few comments >>>>> first: >>>>> >>>>>> --- >>>>>> include/net/mac80211.h | 16 ++++++++++-- >>>>>> net/mac80211/ieee80211_i.h | 3 +++ >>>>>> net/mac80211/main.c | 6 +++++ >>>>>> net/mac80211/tx.c | 63 >>>>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>>>> >>>>>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>>>>> index ac2ed8e..ba5a345 100644 >>>>>> --- a/include/net/mac80211.h >>>>>> +++ b/include/net/mac80211.h >>>>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>>>> >>>>>> #define IEEE80211_MAX_TX_RETRY 31 >>>>>> >>>>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>>>> + >>>>>> static inline void ieee80211_rate_set_vht(struct >>>>>> ieee80211_tx_rate >>>>>> *rate, >>>>>> u8 mcs, u8 nss) >>>>>> { >>>>>> @@ -6232,7 +6234,8 @@ struct sk_buff *ieee80211_tx_dequeue(struct >>>>>> ieee80211_hw *hw, >>>>>> * @ac: AC number to return packets from. >>>>>> * >>>>>> * Should only be called between calls to >>>>>> ieee80211_txq_schedule_start() >>>>>> - * and ieee80211_txq_schedule_end(). >>>>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, it will >>>>>> be >>>>>> added >>>>>> + * to a remove list and get removed later. >>>>>> * Returns the next txq if successful, %NULL if no queue is >>>>>> eligible. >>>>>> If a txq >>>>>> * is returned, it should be returned with ieee80211_return_txq() >>>>>> after the >>>>>> * driver has finished scheduling it. >>>>>> @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct >>>>>> ieee80211_hw *hw, u8 ac) >>>>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>>>> * @ac: AC number to acquire locks for >>>>>> * >>>>>> - * Release locks previously acquired by >>>>>> ieee80211_txq_schedule_end(). >>>>>> + * Release locks previously acquired by >>>>>> ieee80211_txq_schedule_end(). >>>>>> Check >>>>>> + * and remove the empty txq from rb-tree. >>>>>> */ >>>>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) >>>>>> __releases(txq_lock); >>>>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>>>> ieee80211_hw >>>>>> *hw, struct ieee80211_txq *txq) >>>>>> __acquires(txq_lock) __releases(txq_lock); >>>>>> >>>>>> /** >>>>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>>>> + * >>>>>> + * @tmr: pointer as obtained from local >>>>>> + * >>>>>> + */ >>>>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>>>> + >>>>>> +/** >>>>>> * ieee80211_txq_may_transmit - check whether TXQ is allowed to >>>>>> transmit >>>>>> * >>>>>> * This function is used to check whether given txq is allowed to >>>>>> transmit by >>>>>> diff --git a/net/mac80211/ieee80211_i.h >>>>>> b/net/mac80211/ieee80211_i.h >>>>>> index a4556f9..49aa143e 100644 >>>>>> --- a/net/mac80211/ieee80211_i.h >>>>>> +++ b/net/mac80211/ieee80211_i.h >>>>>> @@ -847,6 +847,7 @@ struct txq_info { >>>>>> struct codel_stats cstats; >>>>>> struct sk_buff_head frags; >>>>>> struct rb_node schedule_order; >>>>>> + struct list_head candidate; >>>>>> unsigned long flags; >>>>>> >>>>>> /* keep last! */ >>>>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>>>> >>>>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>>>> + struct timer_list remove_timer; >>>>>> u16 airtime_flags; >>>>>> >>>>>> const struct ieee80211_ops *ops; >>>>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>>>> index e9ffa8e..78fe24a 100644 >>>>>> --- a/net/mac80211/main.c >>>>>> +++ b/net/mac80211/main.c >>>>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>>>> >>>>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>>>> spin_lock_init(&local->active_txq_lock[i]); >>>>>> } >>>>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>>>> >>>>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); >>>>>> + mod_timer(&local->remove_timer, >>>>>> + jiffies + >>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>> + >>>>>> INIT_LIST_HEAD(&local->chanctx_list); >>>>>> mutex_init(&local->chanctx_mtx); >>>>>> >>>>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>>>> ieee80211_hw >>>>>> *hw) >>>>>> tasklet_kill(&local->tx_pending_tasklet); >>>>>> tasklet_kill(&local->tasklet); >>>>>> >>>>>> + del_timer_sync(&local->remove_timer); >>>>>> #ifdef CONFIG_INET >>>>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>>>> #endif >>>>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>>>> index d00baaa..42ca010 100644 >>>>>> --- a/net/mac80211/tx.c >>>>>> +++ b/net/mac80211/tx.c >>>>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>>>> ieee80211_sub_if_data *sdata, >>>>>> codel_stats_init(&txqi->cstats); >>>>>> __skb_queue_head_init(&txqi->frags); >>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>> + INIT_LIST_HEAD(&txqi->candidate); >>>>>> >>>>>> txqi->txq.vif = &sdata->vif; >>>>>> >>>>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>>>> ieee80211_hw >>>>>> *hw, >>>>>> >>>>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>>>> >>>>>> + if (!list_empty(&txqi->candidate)) >>>>>> + list_del_init(&txqi->candidate); >>>>>> + >>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>>>> goto out; >>>>>> >>>>>> @@ -3783,6 +3787,20 @@ static void >>>>>> __ieee80211_unschedule_txq(struct >>>>>> ieee80211_hw *hw, >>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>> } >>>>>> >>>>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>>>> + struct ieee80211_txq *txq) >>>>>> +{ >>>>>> + struct ieee80211_local *local = hw_to_local(hw); >>>>>> + struct txq_info *txqi = to_txq_info(txq); >>>>>> + >>>>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>> + >>>>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>>>> + __ieee80211_unschedule_txq(hw, txq); >>>>>> + list_del_init(&txqi->candidate); >>>>>> + } >>>>>> +} >>>>>> + >>>>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>>>> struct ieee80211_txq *txq) >>>>>> __acquires(txq_lock) __releases(txq_lock) >>>>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>>>> ieee80211_hw *hw, >>>>>> struct ieee80211_local *local = hw_to_local(hw); >>>>>> >>>>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>> + ieee80211_remove_txq(hw, txq); >>>>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>>>> } >>>>>> >>>>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>>>> ieee80211_hw >>>>>> *hw, >>>>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>> >>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>>>> - (skb_queue_empty(&txqi->frags) && >>>>>> !txqi->tin.backlog_packets)) >>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>> + !txq_has_queue(&txqi->txq) && >>>>>> + list_empty(&txqi->candidate)) >>>>>> + list_add_tail(&txqi->candidate, &local->remove_list[txq->ac]); >>>>>> + >>>>>> } >>>>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>>>> >>>>>> +void __ieee80211_check_txqs(struct ieee80211_local *local, int >>>>>> ac) >>>>>> +{ >>>>>> + struct txq_info *iter, *tmp; >>>>>> + struct sta_info *sta; >>>>>> + >>>>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>>>> + >>>>>> + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], >>>>>> + candidate) { >>>>>> + sta = container_of(iter->txq.sta, struct sta_info, sta); >>>>>> + >>>>>> + if (txq_has_queue(&iter->txq)) >>>>>> + list_del_init(&iter->candidate); >>>>>> + else >>>>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>>>> + } >>>>>> +} >>>>>> + >>>>>> +void ieee80211_txqs_check(struct timer_list *t) >>>>>> +{ >>>>>> + struct ieee80211_local *local = from_timer(local, t, >>>>>> remove_timer); >>>>>> + struct txq_info *iter, *tmp; >>>>>> + struct sta_info *sta; >>>>>> + int ac; >>>>>> + >>>>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>>>> + __ieee80211_check_txqs(local, ac); >>>>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>>>> + } >>>>>> + >>>>>> + mod_timer(&local->remove_timer, >>>>>> + jiffies + >>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>> +} >>>>> >>>>> I'll ask the same as I did last time (where you told me to hold off >>>>> until this round): >>>>> >>>>> Why do you need the timer and the periodic check? If TXQs are added >>>>> to >>>>> the remove list during the scheduling run, and >>>>> __ieee80211_check_txqs() >>>>> is run from schedule_end(), isn't that sufficient to clear the >>>>> list? >>>> Is it possible that a txq is not added to the remove list but then >>>> packets in it are dropped by fq_codel algo? Like the station >>>> disconnects >>>> without any notification. >>> >>> Well as long as all the other cleanup paths call directly into >>> __unschedule_txq(), that should remove stations from the scheduler >>> when >>> they disconnect etc. >> Yes, the disconnect scenario is a bad example. My concern is, say, we >> have 10 stations and only one of them is assigned a very small weight >> compared with that of others. Suppose, after its chance of Tx, it is >> most likely to be placed in the rightmost(still has some packets in >> the >> txq) and no more incoming data for it. The remaining packets in txq >> will >> be dropped due to timeout algo in codel(correct me if I am wrong) but >> this empty txq will stay on the rbtree until other txqs get drained or >> global vt catch up with its vt. The staying time could be long if >> weight >> is extremely small. Then do we need timer to check or any other better >> solution? > > Ah, I see what you mean. No, I don't think this will be a problem; the > scenario you're describing would play out like this: > > 1. Station ends transmitting, still has a single packet queued, gets > moved to the end of the rbtree (and stays there for a while). > > 2. When we finally get to the point where this station gets another > chance to transmit, the CoDel drop timer triggers and the last > packet > is dropped[0]. This means that the queue will just be empty > (and ieee80211_tx_dequeue() will return NULL). > > 3. Because the queue is empty, ieee80211_return_txq() will not put it > back on the rbtree. > > Crucially, in 2. the CoDel algorithm doesn't kick in until the point of > packet dequeue. But even if an empty queue stays on the rbtree for a > while, there is no harm in that: eventually it will get its turn, it > will turn out to be empty, and just be skipped over. Then that will be fine. Thanks for the explanation of the dropping part in CoDel algorithm. > > The issue we need to be concerned about is the opposite: If we have a > queue that *does* have packets queued, but which is *not* scheduled for > transmission, that will stall TX. Is it by design since its vt is more than global vt, right? The lattency may somehow get impacted though. > > [0] CoDel in most cases only drops a single packet at a time, so it > will > not clear out an entire queue with multiple packets in one go. But you > are right that it could conceivably drop the last packet in a queue. > >>> We only need to defer removal inside a single "scheduling round" >>> (i.e., >>> between a pair of ieee80211_txq_schedule_start/end. So if we just >>> walk >>> the remove list in schedule_end() we should be enough, no? >>> >>> Hmm, or maybe a simpler way to fix the original issue is just to have >>> unschedule_txq() update the schedule_pos() pointer? >>> >>> I.e., unschedule_txq checks if the txq being removed is currently >>> being >>> pointed to by schedule_pos[ac], and if it is, it updates schedule_pos >>> to >>> be the rb_next of the current value? >> Actually, if schedule_pos is updated to rb_next of the current value, >> then in the next_txq() where we are going to use rb_next again and >> finally pick the next node of the node we really want. Is it fine to >> update schedule_pos to NULL? > > Hmm, yeah, good point. > > If we do end up setting schedule_pos to NULL in the middle of a > scheduling round, that will make next_txq() "start over", and do > another > loop through the whole thing. I guess we may be able hit a case where > things can oscillate back and forth between addition and removal > resulting in an infinite loop? Not sure, but at least I can't seem to > convince myself that this can't happen. As the loop of next_txq under lock protection as below, txq_schedule_start(); while(txq=next_txq()){ ... return_txq(txq); } txq_schedule_end(); I do not see any chance of addition, no? In ath10k, we will usually push packets of first txq as many as we can until it is drained and then move to the next one. So if a txq gets removed in the return_txq, it should always be the leftmost. And during this period, neither vt of any station or global vt can be updated due to lock protection. > > But in that case, we could fix it by just conditionally assigning > either > rb_next or rb_prev to the schedule_pos in unschedule_txq()? I.e., > something like: > > local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); I am not sure I am getting your point. Still in next_txq, schedule_pos[ac] will lead us to the next node of the one we want. > > -Toke
Yibo Zhao <yiboz@codeaurora.org> writes: > On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >> Yibo Zhao <yiboz@codeaurora.org> writes: >> >>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>> >>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>> >>>>>>> In a loop txqs dequeue scenario, if the first txq in the rbtree >>>>>>> gets >>>>>>> removed from rbtree immediately in the ieee80211_return_txq(), the >>>>>>> loop will break soon in the ieee80211_next_txq() due to >>>>>>> schedule_pos >>>>>>> not leading to the second txq in the rbtree. Thus, defering the >>>>>>> removal right before the end of this schedule round. >>>>>>> >>>>>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>>>>> >>>>>> I didn't write this patch, so please don't use my sign-off. I'll >>>>>> add >>>>>> ack or review tags as appropriate in reply; but a few comments >>>>>> first: >>>>>> >>>>>>> --- >>>>>>> include/net/mac80211.h | 16 ++++++++++-- >>>>>>> net/mac80211/ieee80211_i.h | 3 +++ >>>>>>> net/mac80211/main.c | 6 +++++ >>>>>>> net/mac80211/tx.c | 63 >>>>>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>>>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>>>>> >>>>>>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>>>>>> index ac2ed8e..ba5a345 100644 >>>>>>> --- a/include/net/mac80211.h >>>>>>> +++ b/include/net/mac80211.h >>>>>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>>>>> >>>>>>> #define IEEE80211_MAX_TX_RETRY 31 >>>>>>> >>>>>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>>>>> + >>>>>>> static inline void ieee80211_rate_set_vht(struct >>>>>>> ieee80211_tx_rate >>>>>>> *rate, >>>>>>> u8 mcs, u8 nss) >>>>>>> { >>>>>>> @@ -6232,7 +6234,8 @@ struct sk_buff *ieee80211_tx_dequeue(struct >>>>>>> ieee80211_hw *hw, >>>>>>> * @ac: AC number to return packets from. >>>>>>> * >>>>>>> * Should only be called between calls to >>>>>>> ieee80211_txq_schedule_start() >>>>>>> - * and ieee80211_txq_schedule_end(). >>>>>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, it will >>>>>>> be >>>>>>> added >>>>>>> + * to a remove list and get removed later. >>>>>>> * Returns the next txq if successful, %NULL if no queue is >>>>>>> eligible. >>>>>>> If a txq >>>>>>> * is returned, it should be returned with ieee80211_return_txq() >>>>>>> after the >>>>>>> * driver has finished scheduling it. >>>>>>> @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct >>>>>>> ieee80211_hw *hw, u8 ac) >>>>>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>>>>> * @ac: AC number to acquire locks for >>>>>>> * >>>>>>> - * Release locks previously acquired by >>>>>>> ieee80211_txq_schedule_end(). >>>>>>> + * Release locks previously acquired by >>>>>>> ieee80211_txq_schedule_end(). >>>>>>> Check >>>>>>> + * and remove the empty txq from rb-tree. >>>>>>> */ >>>>>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) >>>>>>> __releases(txq_lock); >>>>>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>>>>> ieee80211_hw >>>>>>> *hw, struct ieee80211_txq *txq) >>>>>>> __acquires(txq_lock) __releases(txq_lock); >>>>>>> >>>>>>> /** >>>>>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>>>>> + * >>>>>>> + * @tmr: pointer as obtained from local >>>>>>> + * >>>>>>> + */ >>>>>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>>>>> + >>>>>>> +/** >>>>>>> * ieee80211_txq_may_transmit - check whether TXQ is allowed to >>>>>>> transmit >>>>>>> * >>>>>>> * This function is used to check whether given txq is allowed to >>>>>>> transmit by >>>>>>> diff --git a/net/mac80211/ieee80211_i.h >>>>>>> b/net/mac80211/ieee80211_i.h >>>>>>> index a4556f9..49aa143e 100644 >>>>>>> --- a/net/mac80211/ieee80211_i.h >>>>>>> +++ b/net/mac80211/ieee80211_i.h >>>>>>> @@ -847,6 +847,7 @@ struct txq_info { >>>>>>> struct codel_stats cstats; >>>>>>> struct sk_buff_head frags; >>>>>>> struct rb_node schedule_order; >>>>>>> + struct list_head candidate; >>>>>>> unsigned long flags; >>>>>>> >>>>>>> /* keep last! */ >>>>>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>>>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>>>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>>>>> >>>>>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>>>>> + struct timer_list remove_timer; >>>>>>> u16 airtime_flags; >>>>>>> >>>>>>> const struct ieee80211_ops *ops; >>>>>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>>>>> index e9ffa8e..78fe24a 100644 >>>>>>> --- a/net/mac80211/main.c >>>>>>> +++ b/net/mac80211/main.c >>>>>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>>>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>>>>> >>>>>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>>>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>>>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>>>>> spin_lock_init(&local->active_txq_lock[i]); >>>>>>> } >>>>>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>>>>> >>>>>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); >>>>>>> + mod_timer(&local->remove_timer, >>>>>>> + jiffies + >>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>> + >>>>>>> INIT_LIST_HEAD(&local->chanctx_list); >>>>>>> mutex_init(&local->chanctx_mtx); >>>>>>> >>>>>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>>>>> ieee80211_hw >>>>>>> *hw) >>>>>>> tasklet_kill(&local->tx_pending_tasklet); >>>>>>> tasklet_kill(&local->tasklet); >>>>>>> >>>>>>> + del_timer_sync(&local->remove_timer); >>>>>>> #ifdef CONFIG_INET >>>>>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>>>>> #endif >>>>>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>>>>> index d00baaa..42ca010 100644 >>>>>>> --- a/net/mac80211/tx.c >>>>>>> +++ b/net/mac80211/tx.c >>>>>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>>>>> ieee80211_sub_if_data *sdata, >>>>>>> codel_stats_init(&txqi->cstats); >>>>>>> __skb_queue_head_init(&txqi->frags); >>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>> + INIT_LIST_HEAD(&txqi->candidate); >>>>>>> >>>>>>> txqi->txq.vif = &sdata->vif; >>>>>>> >>>>>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>>>>> ieee80211_hw >>>>>>> *hw, >>>>>>> >>>>>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>> >>>>>>> + if (!list_empty(&txqi->candidate)) >>>>>>> + list_del_init(&txqi->candidate); >>>>>>> + >>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>>>>> goto out; >>>>>>> >>>>>>> @@ -3783,6 +3787,20 @@ static void >>>>>>> __ieee80211_unschedule_txq(struct >>>>>>> ieee80211_hw *hw, >>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>> } >>>>>>> >>>>>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>>>>> + struct ieee80211_txq *txq) >>>>>>> +{ >>>>>>> + struct ieee80211_local *local = hw_to_local(hw); >>>>>>> + struct txq_info *txqi = to_txq_info(txq); >>>>>>> + >>>>>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>> + >>>>>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>>>>> + __ieee80211_unschedule_txq(hw, txq); >>>>>>> + list_del_init(&txqi->candidate); >>>>>>> + } >>>>>>> +} >>>>>>> + >>>>>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>>>>> struct ieee80211_txq *txq) >>>>>>> __acquires(txq_lock) __releases(txq_lock) >>>>>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>>>>> ieee80211_hw *hw, >>>>>>> struct ieee80211_local *local = hw_to_local(hw); >>>>>>> >>>>>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>> + ieee80211_remove_txq(hw, txq); >>>>>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>>>>> } >>>>>>> >>>>>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>>>>> ieee80211_hw >>>>>>> *hw, >>>>>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>> >>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>>>>> - (skb_queue_empty(&txqi->frags) && >>>>>>> !txqi->tin.backlog_packets)) >>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>> + !txq_has_queue(&txqi->txq) && >>>>>>> + list_empty(&txqi->candidate)) >>>>>>> + list_add_tail(&txqi->candidate, &local->remove_list[txq->ac]); >>>>>>> + >>>>>>> } >>>>>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>>>>> >>>>>>> +void __ieee80211_check_txqs(struct ieee80211_local *local, int >>>>>>> ac) >>>>>>> +{ >>>>>>> + struct txq_info *iter, *tmp; >>>>>>> + struct sta_info *sta; >>>>>>> + >>>>>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>>>>> + >>>>>>> + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], >>>>>>> + candidate) { >>>>>>> + sta = container_of(iter->txq.sta, struct sta_info, sta); >>>>>>> + >>>>>>> + if (txq_has_queue(&iter->txq)) >>>>>>> + list_del_init(&iter->candidate); >>>>>>> + else >>>>>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>>>>> + } >>>>>>> +} >>>>>>> + >>>>>>> +void ieee80211_txqs_check(struct timer_list *t) >>>>>>> +{ >>>>>>> + struct ieee80211_local *local = from_timer(local, t, >>>>>>> remove_timer); >>>>>>> + struct txq_info *iter, *tmp; >>>>>>> + struct sta_info *sta; >>>>>>> + int ac; >>>>>>> + >>>>>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>>>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>> + __ieee80211_check_txqs(local, ac); >>>>>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>>>>> + } >>>>>>> + >>>>>>> + mod_timer(&local->remove_timer, >>>>>>> + jiffies + >>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>> +} >>>>>> >>>>>> I'll ask the same as I did last time (where you told me to hold off >>>>>> until this round): >>>>>> >>>>>> Why do you need the timer and the periodic check? If TXQs are added >>>>>> to >>>>>> the remove list during the scheduling run, and >>>>>> __ieee80211_check_txqs() >>>>>> is run from schedule_end(), isn't that sufficient to clear the >>>>>> list? >>>>> Is it possible that a txq is not added to the remove list but then >>>>> packets in it are dropped by fq_codel algo? Like the station >>>>> disconnects >>>>> without any notification. >>>> >>>> Well as long as all the other cleanup paths call directly into >>>> __unschedule_txq(), that should remove stations from the scheduler >>>> when >>>> they disconnect etc. >>> Yes, the disconnect scenario is a bad example. My concern is, say, we >>> have 10 stations and only one of them is assigned a very small weight >>> compared with that of others. Suppose, after its chance of Tx, it is >>> most likely to be placed in the rightmost(still has some packets in >>> the >>> txq) and no more incoming data for it. The remaining packets in txq >>> will >>> be dropped due to timeout algo in codel(correct me if I am wrong) but >>> this empty txq will stay on the rbtree until other txqs get drained or >>> global vt catch up with its vt. The staying time could be long if >>> weight >>> is extremely small. Then do we need timer to check or any other better >>> solution? >> >> Ah, I see what you mean. No, I don't think this will be a problem; the >> scenario you're describing would play out like this: >> >> 1. Station ends transmitting, still has a single packet queued, gets >> moved to the end of the rbtree (and stays there for a while). >> >> 2. When we finally get to the point where this station gets another >> chance to transmit, the CoDel drop timer triggers and the last >> packet >> is dropped[0]. This means that the queue will just be empty >> (and ieee80211_tx_dequeue() will return NULL). >> >> 3. Because the queue is empty, ieee80211_return_txq() will not put it >> back on the rbtree. >> >> Crucially, in 2. the CoDel algorithm doesn't kick in until the point of >> packet dequeue. But even if an empty queue stays on the rbtree for a >> while, there is no harm in that: eventually it will get its turn, it >> will turn out to be empty, and just be skipped over. > Then that will be fine. Thanks for the explanation of the dropping part > in CoDel algorithm. Yup, think so. And you're welcome :) >> The issue we need to be concerned about is the opposite: If we have a >> queue that *does* have packets queued, but which is *not* scheduled for >> transmission, that will stall TX. > Is it by design since its vt is more than global vt, right? The lattency > may somehow get impacted though. Well, it should still stay on the rbtree as long as it has packets queued. We don't have a check anywhere that reschedules TXQs whose v_t drops below global v_t... >> [0] CoDel in most cases only drops a single packet at a time, so it >> will >> not clear out an entire queue with multiple packets in one go. But you >> are right that it could conceivably drop the last packet in a queue. >> >>>> We only need to defer removal inside a single "scheduling round" >>>> (i.e., >>>> between a pair of ieee80211_txq_schedule_start/end. So if we just >>>> walk >>>> the remove list in schedule_end() we should be enough, no? >>>> >>>> Hmm, or maybe a simpler way to fix the original issue is just to have >>>> unschedule_txq() update the schedule_pos() pointer? >>>> >>>> I.e., unschedule_txq checks if the txq being removed is currently >>>> being >>>> pointed to by schedule_pos[ac], and if it is, it updates schedule_pos >>>> to >>>> be the rb_next of the current value? >>> Actually, if schedule_pos is updated to rb_next of the current value, >>> then in the next_txq() where we are going to use rb_next again and >>> finally pick the next node of the node we really want. Is it fine to >>> update schedule_pos to NULL? >> >> Hmm, yeah, good point. >> >> If we do end up setting schedule_pos to NULL in the middle of a >> scheduling round, that will make next_txq() "start over", and do >> another >> loop through the whole thing. I guess we may be able hit a case where >> things can oscillate back and forth between addition and removal >> resulting in an infinite loop? Not sure, but at least I can't seem to >> convince myself that this can't happen. > > As the loop of next_txq under lock protection as below, > > txq_schedule_start(); > while(txq=next_txq()){ > ... > return_txq(txq); > } > txq_schedule_end(); > > I do not see any chance of addition, no? As you noted in your other email, Felix reduced the locking. And yeah, we need to rebase this series to also incorporate that. I figure I can send an updated version of the first patch in the series once we've worked out the remaining issues with your follow-up patches. > In ath10k, we will usually push packets of first txq as many as we can > until it is drained and then move to the next one. So if a txq gets > removed in the return_txq, it should always be the leftmost. And > during this period, neither vt of any station or global vt can be > updated due to lock protection. > >> >> But in that case, we could fix it by just conditionally assigning >> either >> rb_next or rb_prev to the schedule_pos in unschedule_txq()? I.e., >> something like: >> >> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); > I am not sure I am getting your point. Still in next_txq, > schedule_pos[ac] will lead us to the next node of the one we want. The logic in next_txq is different when schedule_pos[ac] is NULL, vs when rb_next(schedule_pos[ac]) is NULL. The former restarts a new scheduling round, while the latter ends the current round. -Toke
On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: > Yibo Zhao <yiboz@codeaurora.org> writes: > >> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>> Yibo Zhao <yiboz@codeaurora.org> writes: >>> >>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>> >>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>> >>>>>>>> In a loop txqs dequeue scenario, if the first txq in the rbtree >>>>>>>> gets >>>>>>>> removed from rbtree immediately in the ieee80211_return_txq(), >>>>>>>> the >>>>>>>> loop will break soon in the ieee80211_next_txq() due to >>>>>>>> schedule_pos >>>>>>>> not leading to the second txq in the rbtree. Thus, defering the >>>>>>>> removal right before the end of this schedule round. >>>>>>>> >>>>>>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>>>>>> >>>>>>> I didn't write this patch, so please don't use my sign-off. I'll >>>>>>> add >>>>>>> ack or review tags as appropriate in reply; but a few comments >>>>>>> first: >>>>>>> >>>>>>>> --- >>>>>>>> include/net/mac80211.h | 16 ++++++++++-- >>>>>>>> net/mac80211/ieee80211_i.h | 3 +++ >>>>>>>> net/mac80211/main.c | 6 +++++ >>>>>>>> net/mac80211/tx.c | 63 >>>>>>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>>>>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>>>>>> >>>>>>>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>>>>>>> index ac2ed8e..ba5a345 100644 >>>>>>>> --- a/include/net/mac80211.h >>>>>>>> +++ b/include/net/mac80211.h >>>>>>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>>>>>> >>>>>>>> #define IEEE80211_MAX_TX_RETRY 31 >>>>>>>> >>>>>>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>>>>>> + >>>>>>>> static inline void ieee80211_rate_set_vht(struct >>>>>>>> ieee80211_tx_rate >>>>>>>> *rate, >>>>>>>> u8 mcs, u8 nss) >>>>>>>> { >>>>>>>> @@ -6232,7 +6234,8 @@ struct sk_buff >>>>>>>> *ieee80211_tx_dequeue(struct >>>>>>>> ieee80211_hw *hw, >>>>>>>> * @ac: AC number to return packets from. >>>>>>>> * >>>>>>>> * Should only be called between calls to >>>>>>>> ieee80211_txq_schedule_start() >>>>>>>> - * and ieee80211_txq_schedule_end(). >>>>>>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, it >>>>>>>> will >>>>>>>> be >>>>>>>> added >>>>>>>> + * to a remove list and get removed later. >>>>>>>> * Returns the next txq if successful, %NULL if no queue is >>>>>>>> eligible. >>>>>>>> If a txq >>>>>>>> * is returned, it should be returned with >>>>>>>> ieee80211_return_txq() >>>>>>>> after the >>>>>>>> * driver has finished scheduling it. >>>>>>>> @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct >>>>>>>> ieee80211_hw *hw, u8 ac) >>>>>>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>>>>>> * @ac: AC number to acquire locks for >>>>>>>> * >>>>>>>> - * Release locks previously acquired by >>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>> + * Release locks previously acquired by >>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>> Check >>>>>>>> + * and remove the empty txq from rb-tree. >>>>>>>> */ >>>>>>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) >>>>>>>> __releases(txq_lock); >>>>>>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>>>>>> ieee80211_hw >>>>>>>> *hw, struct ieee80211_txq *txq) >>>>>>>> __acquires(txq_lock) __releases(txq_lock); >>>>>>>> >>>>>>>> /** >>>>>>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>>>>>> + * >>>>>>>> + * @tmr: pointer as obtained from local >>>>>>>> + * >>>>>>>> + */ >>>>>>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>>>>>> + >>>>>>>> +/** >>>>>>>> * ieee80211_txq_may_transmit - check whether TXQ is allowed to >>>>>>>> transmit >>>>>>>> * >>>>>>>> * This function is used to check whether given txq is allowed >>>>>>>> to >>>>>>>> transmit by >>>>>>>> diff --git a/net/mac80211/ieee80211_i.h >>>>>>>> b/net/mac80211/ieee80211_i.h >>>>>>>> index a4556f9..49aa143e 100644 >>>>>>>> --- a/net/mac80211/ieee80211_i.h >>>>>>>> +++ b/net/mac80211/ieee80211_i.h >>>>>>>> @@ -847,6 +847,7 @@ struct txq_info { >>>>>>>> struct codel_stats cstats; >>>>>>>> struct sk_buff_head frags; >>>>>>>> struct rb_node schedule_order; >>>>>>>> + struct list_head candidate; >>>>>>>> unsigned long flags; >>>>>>>> >>>>>>>> /* keep last! */ >>>>>>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>>>>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>>>>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>>>>>> >>>>>>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>>>>>> + struct timer_list remove_timer; >>>>>>>> u16 airtime_flags; >>>>>>>> >>>>>>>> const struct ieee80211_ops *ops; >>>>>>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>>>>>> index e9ffa8e..78fe24a 100644 >>>>>>>> --- a/net/mac80211/main.c >>>>>>>> +++ b/net/mac80211/main.c >>>>>>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>>>>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>>>>>> >>>>>>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>>>>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>>>>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>>>>>> spin_lock_init(&local->active_txq_lock[i]); >>>>>>>> } >>>>>>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>>>>>> >>>>>>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); >>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>> + jiffies + >>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>> + >>>>>>>> INIT_LIST_HEAD(&local->chanctx_list); >>>>>>>> mutex_init(&local->chanctx_mtx); >>>>>>>> >>>>>>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>>>>>> ieee80211_hw >>>>>>>> *hw) >>>>>>>> tasklet_kill(&local->tx_pending_tasklet); >>>>>>>> tasklet_kill(&local->tasklet); >>>>>>>> >>>>>>>> + del_timer_sync(&local->remove_timer); >>>>>>>> #ifdef CONFIG_INET >>>>>>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>>>>>> #endif >>>>>>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>>>>>> index d00baaa..42ca010 100644 >>>>>>>> --- a/net/mac80211/tx.c >>>>>>>> +++ b/net/mac80211/tx.c >>>>>>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>>>>>> ieee80211_sub_if_data *sdata, >>>>>>>> codel_stats_init(&txqi->cstats); >>>>>>>> __skb_queue_head_init(&txqi->frags); >>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>> + INIT_LIST_HEAD(&txqi->candidate); >>>>>>>> >>>>>>>> txqi->txq.vif = &sdata->vif; >>>>>>>> >>>>>>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>>>>>> ieee80211_hw >>>>>>>> *hw, >>>>>>>> >>>>>>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>> >>>>>>>> + if (!list_empty(&txqi->candidate)) >>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>> + >>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>>>>>> goto out; >>>>>>>> >>>>>>>> @@ -3783,6 +3787,20 @@ static void >>>>>>>> __ieee80211_unschedule_txq(struct >>>>>>>> ieee80211_hw *hw, >>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>> } >>>>>>>> >>>>>>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>>>>>> + struct ieee80211_txq *txq) >>>>>>>> +{ >>>>>>>> + struct ieee80211_local *local = hw_to_local(hw); >>>>>>>> + struct txq_info *txqi = to_txq_info(txq); >>>>>>>> + >>>>>>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>> + >>>>>>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>>>>>> + __ieee80211_unschedule_txq(hw, txq); >>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>> + } >>>>>>>> +} >>>>>>>> + >>>>>>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>>>>>> struct ieee80211_txq *txq) >>>>>>>> __acquires(txq_lock) __releases(txq_lock) >>>>>>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>>>>>> ieee80211_hw *hw, >>>>>>>> struct ieee80211_local *local = hw_to_local(hw); >>>>>>>> >>>>>>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>> + ieee80211_remove_txq(hw, txq); >>>>>>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>> } >>>>>>>> >>>>>>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>>>>>> ieee80211_hw >>>>>>>> *hw, >>>>>>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>> >>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>>>>>> - (skb_queue_empty(&txqi->frags) && >>>>>>>> !txqi->tin.backlog_packets)) >>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>> + !txq_has_queue(&txqi->txq) && >>>>>>>> + list_empty(&txqi->candidate)) >>>>>>>> + list_add_tail(&txqi->candidate, >>>>>>>> &local->remove_list[txq->ac]); >>>>>>>> + >>>>>>>> } >>>>>>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>>>>>> >>>>>>>> +void __ieee80211_check_txqs(struct ieee80211_local *local, int >>>>>>>> ac) >>>>>>>> +{ >>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>> + struct sta_info *sta; >>>>>>>> + >>>>>>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>>>>>> + >>>>>>>> + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], >>>>>>>> + candidate) { >>>>>>>> + sta = container_of(iter->txq.sta, struct sta_info, sta); >>>>>>>> + >>>>>>>> + if (txq_has_queue(&iter->txq)) >>>>>>>> + list_del_init(&iter->candidate); >>>>>>>> + else >>>>>>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>>>>>> + } >>>>>>>> +} >>>>>>>> + >>>>>>>> +void ieee80211_txqs_check(struct timer_list *t) >>>>>>>> +{ >>>>>>>> + struct ieee80211_local *local = from_timer(local, t, >>>>>>>> remove_timer); >>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>> + struct sta_info *sta; >>>>>>>> + int ac; >>>>>>>> + >>>>>>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>>>>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>> + __ieee80211_check_txqs(local, ac); >>>>>>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>>>>>> + } >>>>>>>> + >>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>> + jiffies + >>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>> +} >>>>>>> >>>>>>> I'll ask the same as I did last time (where you told me to hold >>>>>>> off >>>>>>> until this round): >>>>>>> >>>>>>> Why do you need the timer and the periodic check? If TXQs are >>>>>>> added >>>>>>> to >>>>>>> the remove list during the scheduling run, and >>>>>>> __ieee80211_check_txqs() >>>>>>> is run from schedule_end(), isn't that sufficient to clear the >>>>>>> list? >>>>>> Is it possible that a txq is not added to the remove list but then >>>>>> packets in it are dropped by fq_codel algo? Like the station >>>>>> disconnects >>>>>> without any notification. >>>>> >>>>> Well as long as all the other cleanup paths call directly into >>>>> __unschedule_txq(), that should remove stations from the scheduler >>>>> when >>>>> they disconnect etc. >>>> Yes, the disconnect scenario is a bad example. My concern is, say, >>>> we >>>> have 10 stations and only one of them is assigned a very small >>>> weight >>>> compared with that of others. Suppose, after its chance of Tx, it is >>>> most likely to be placed in the rightmost(still has some packets in >>>> the >>>> txq) and no more incoming data for it. The remaining packets in txq >>>> will >>>> be dropped due to timeout algo in codel(correct me if I am wrong) >>>> but >>>> this empty txq will stay on the rbtree until other txqs get drained >>>> or >>>> global vt catch up with its vt. The staying time could be long if >>>> weight >>>> is extremely small. Then do we need timer to check or any other >>>> better >>>> solution? >>> >>> Ah, I see what you mean. No, I don't think this will be a problem; >>> the >>> scenario you're describing would play out like this: >>> >>> 1. Station ends transmitting, still has a single packet queued, gets >>> moved to the end of the rbtree (and stays there for a while). >>> >>> 2. When we finally get to the point where this station gets another >>> chance to transmit, the CoDel drop timer triggers and the last >>> packet >>> is dropped[0]. This means that the queue will just be empty >>> (and ieee80211_tx_dequeue() will return NULL). >>> >>> 3. Because the queue is empty, ieee80211_return_txq() will not put it >>> back on the rbtree. >>> >>> Crucially, in 2. the CoDel algorithm doesn't kick in until the point >>> of >>> packet dequeue. But even if an empty queue stays on the rbtree for a >>> while, there is no harm in that: eventually it will get its turn, it >>> will turn out to be empty, and just be skipped over. >> Then that will be fine. Thanks for the explanation of the dropping >> part >> in CoDel algorithm. > > Yup, think so. And you're welcome :) > >>> The issue we need to be concerned about is the opposite: If we have a >>> queue that *does* have packets queued, but which is *not* scheduled >>> for >>> transmission, that will stall TX. >> Is it by design since its vt is more than global vt, right? The >> lattency >> may somehow get impacted though. > > Well, it should still stay on the rbtree as long as it has packets > queued. We don't have a check anywhere that reschedules TXQs whose v_t > drops below global v_t... > >>> [0] CoDel in most cases only drops a single packet at a time, so it >>> will >>> not clear out an entire queue with multiple packets in one go. But >>> you >>> are right that it could conceivably drop the last packet in a queue. >>> >>>>> We only need to defer removal inside a single "scheduling round" >>>>> (i.e., >>>>> between a pair of ieee80211_txq_schedule_start/end. So if we just >>>>> walk >>>>> the remove list in schedule_end() we should be enough, no? >>>>> >>>>> Hmm, or maybe a simpler way to fix the original issue is just to >>>>> have >>>>> unschedule_txq() update the schedule_pos() pointer? >>>>> >>>>> I.e., unschedule_txq checks if the txq being removed is currently >>>>> being >>>>> pointed to by schedule_pos[ac], and if it is, it updates >>>>> schedule_pos >>>>> to >>>>> be the rb_next of the current value? >>>> Actually, if schedule_pos is updated to rb_next of the current >>>> value, >>>> then in the next_txq() where we are going to use rb_next again and >>>> finally pick the next node of the node we really want. Is it fine to >>>> update schedule_pos to NULL? >>> >>> Hmm, yeah, good point. >>> >>> If we do end up setting schedule_pos to NULL in the middle of a >>> scheduling round, that will make next_txq() "start over", and do >>> another >>> loop through the whole thing. I guess we may be able hit a case where >>> things can oscillate back and forth between addition and removal >>> resulting in an infinite loop? Not sure, but at least I can't seem to >>> convince myself that this can't happen. >> >> As the loop of next_txq under lock protection as below, >> >> txq_schedule_start(); >> while(txq=next_txq()){ >> ... >> return_txq(txq); >> } >> txq_schedule_end(); >> >> I do not see any chance of addition, no? > > As you noted in your other email, Felix reduced the locking. And yeah, > we need to rebase this series to also incorporate that. I figure I can > send an updated version of the first patch in the series once we've > worked out the remaining issues with your follow-up patches. > Oh, I was thinking we were discussing without locking reduced. Yes, I also agree there might be a case causing infinite loop. With locking reduced, the tree can be adjusted between next_txq() and return_txq() in the loop situation. For further discussion, let 's consider, 1) the tree starts like: A->B->C->D->E 2) then next_txq() returns A for dequeuing 3) driver dequeues A and draines A without any active txq locked meaning the tree could be changed upon Tx compeletion. 4) then in return_txq(), the tree could be, i A->B->C->D->E （A is empty, and maybe soon be added back before the loop end） ii B->C->A->D->E （A is empty, and maybe soon be added back before the loop end） iii B->C->D->E->A （A is empty, and maybe soon be added back before the loop end) with this change: local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); for case i, local->schedule_pos[ac] is rb_next(A) which is B, and in next_txq(), rb_next(B) is what we returns which actually is C and B is skipped, no? Similiar for case ii, we skip B, C, D. Also I am wondering if there will be some SMP issues relating with local->schedule_pos[ac]. >> In ath10k, we will usually push packets of first txq as many as we can >> until it is drained and then move to the next one. So if a txq gets >> removed in the return_txq, it should always be the leftmost. And >> during this period, neither vt of any station or global vt can be >> updated due to lock protection. >> >>> >>> But in that case, we could fix it by just conditionally assigning >>> either >>> rb_next or rb_prev to the schedule_pos in unschedule_txq()? I.e., >>> something like: >>> >>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >> I am not sure I am getting your point. Still in next_txq, >> schedule_pos[ac] will lead us to the next node of the one we want. > > The logic in next_txq is different when schedule_pos[ac] is NULL, vs > when rb_next(schedule_pos[ac]) is NULL. The former restarts a new > scheduling round, while the latter ends the current round. > > -Toke
Yibo Zhao <yiboz@codeaurora.org> writes: > On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: >> Yibo Zhao <yiboz@codeaurora.org> writes: >> >>> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>> >>>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>> >>>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>> >>>>>>>>> In a loop txqs dequeue scenario, if the first txq in the rbtree >>>>>>>>> gets >>>>>>>>> removed from rbtree immediately in the ieee80211_return_txq(), >>>>>>>>> the >>>>>>>>> loop will break soon in the ieee80211_next_txq() due to >>>>>>>>> schedule_pos >>>>>>>>> not leading to the second txq in the rbtree. Thus, defering the >>>>>>>>> removal right before the end of this schedule round. >>>>>>>>> >>>>>>>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>>>>>>> >>>>>>>> I didn't write this patch, so please don't use my sign-off. I'll >>>>>>>> add >>>>>>>> ack or review tags as appropriate in reply; but a few comments >>>>>>>> first: >>>>>>>> >>>>>>>>> --- >>>>>>>>> include/net/mac80211.h | 16 ++++++++++-- >>>>>>>>> net/mac80211/ieee80211_i.h | 3 +++ >>>>>>>>> net/mac80211/main.c | 6 +++++ >>>>>>>>> net/mac80211/tx.c | 63 >>>>>>>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>>>>>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>>>>>>> >>>>>>>>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>>>>>>>> index ac2ed8e..ba5a345 100644 >>>>>>>>> --- a/include/net/mac80211.h >>>>>>>>> +++ b/include/net/mac80211.h >>>>>>>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>>>>>>> >>>>>>>>> #define IEEE80211_MAX_TX_RETRY 31 >>>>>>>>> >>>>>>>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>>>>>>> + >>>>>>>>> static inline void ieee80211_rate_set_vht(struct >>>>>>>>> ieee80211_tx_rate >>>>>>>>> *rate, >>>>>>>>> u8 mcs, u8 nss) >>>>>>>>> { >>>>>>>>> @@ -6232,7 +6234,8 @@ struct sk_buff >>>>>>>>> *ieee80211_tx_dequeue(struct >>>>>>>>> ieee80211_hw *hw, >>>>>>>>> * @ac: AC number to return packets from. >>>>>>>>> * >>>>>>>>> * Should only be called between calls to >>>>>>>>> ieee80211_txq_schedule_start() >>>>>>>>> - * and ieee80211_txq_schedule_end(). >>>>>>>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, it >>>>>>>>> will >>>>>>>>> be >>>>>>>>> added >>>>>>>>> + * to a remove list and get removed later. >>>>>>>>> * Returns the next txq if successful, %NULL if no queue is >>>>>>>>> eligible. >>>>>>>>> If a txq >>>>>>>>> * is returned, it should be returned with >>>>>>>>> ieee80211_return_txq() >>>>>>>>> after the >>>>>>>>> * driver has finished scheduling it. >>>>>>>>> @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct >>>>>>>>> ieee80211_hw *hw, u8 ac) >>>>>>>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>>>>>>> * @ac: AC number to acquire locks for >>>>>>>>> * >>>>>>>>> - * Release locks previously acquired by >>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>> + * Release locks previously acquired by >>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>> Check >>>>>>>>> + * and remove the empty txq from rb-tree. >>>>>>>>> */ >>>>>>>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) >>>>>>>>> __releases(txq_lock); >>>>>>>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>>>>>>> ieee80211_hw >>>>>>>>> *hw, struct ieee80211_txq *txq) >>>>>>>>> __acquires(txq_lock) __releases(txq_lock); >>>>>>>>> >>>>>>>>> /** >>>>>>>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>>>>>>> + * >>>>>>>>> + * @tmr: pointer as obtained from local >>>>>>>>> + * >>>>>>>>> + */ >>>>>>>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>>>>>>> + >>>>>>>>> +/** >>>>>>>>> * ieee80211_txq_may_transmit - check whether TXQ is allowed to >>>>>>>>> transmit >>>>>>>>> * >>>>>>>>> * This function is used to check whether given txq is allowed >>>>>>>>> to >>>>>>>>> transmit by >>>>>>>>> diff --git a/net/mac80211/ieee80211_i.h >>>>>>>>> b/net/mac80211/ieee80211_i.h >>>>>>>>> index a4556f9..49aa143e 100644 >>>>>>>>> --- a/net/mac80211/ieee80211_i.h >>>>>>>>> +++ b/net/mac80211/ieee80211_i.h >>>>>>>>> @@ -847,6 +847,7 @@ struct txq_info { >>>>>>>>> struct codel_stats cstats; >>>>>>>>> struct sk_buff_head frags; >>>>>>>>> struct rb_node schedule_order; >>>>>>>>> + struct list_head candidate; >>>>>>>>> unsigned long flags; >>>>>>>>> >>>>>>>>> /* keep last! */ >>>>>>>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>>>>>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>>>>>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>>>>>>> >>>>>>>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>>>>>>> + struct timer_list remove_timer; >>>>>>>>> u16 airtime_flags; >>>>>>>>> >>>>>>>>> const struct ieee80211_ops *ops; >>>>>>>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>>>>>>> index e9ffa8e..78fe24a 100644 >>>>>>>>> --- a/net/mac80211/main.c >>>>>>>>> +++ b/net/mac80211/main.c >>>>>>>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>>>>>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>>>>>>> >>>>>>>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>>>>>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>>>>>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>>>>>>> spin_lock_init(&local->active_txq_lock[i]); >>>>>>>>> } >>>>>>>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>>>>>>> >>>>>>>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); >>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>> + jiffies + >>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>> + >>>>>>>>> INIT_LIST_HEAD(&local->chanctx_list); >>>>>>>>> mutex_init(&local->chanctx_mtx); >>>>>>>>> >>>>>>>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>>>>>>> ieee80211_hw >>>>>>>>> *hw) >>>>>>>>> tasklet_kill(&local->tx_pending_tasklet); >>>>>>>>> tasklet_kill(&local->tasklet); >>>>>>>>> >>>>>>>>> + del_timer_sync(&local->remove_timer); >>>>>>>>> #ifdef CONFIG_INET >>>>>>>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>>>>>>> #endif >>>>>>>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>>>>>>> index d00baaa..42ca010 100644 >>>>>>>>> --- a/net/mac80211/tx.c >>>>>>>>> +++ b/net/mac80211/tx.c >>>>>>>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>>>>>>> ieee80211_sub_if_data *sdata, >>>>>>>>> codel_stats_init(&txqi->cstats); >>>>>>>>> __skb_queue_head_init(&txqi->frags); >>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>> + INIT_LIST_HEAD(&txqi->candidate); >>>>>>>>> >>>>>>>>> txqi->txq.vif = &sdata->vif; >>>>>>>>> >>>>>>>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>>>>>>> ieee80211_hw >>>>>>>>> *hw, >>>>>>>>> >>>>>>>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>> >>>>>>>>> + if (!list_empty(&txqi->candidate)) >>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>> + >>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>>>>>>> goto out; >>>>>>>>> >>>>>>>>> @@ -3783,6 +3787,20 @@ static void >>>>>>>>> __ieee80211_unschedule_txq(struct >>>>>>>>> ieee80211_hw *hw, >>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>> } >>>>>>>>> >>>>>>>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>>>>>>> + struct ieee80211_txq *txq) >>>>>>>>> +{ >>>>>>>>> + struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>> + struct txq_info *txqi = to_txq_info(txq); >>>>>>>>> + >>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>> + >>>>>>>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>>>>>>> + __ieee80211_unschedule_txq(hw, txq); >>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>> + } >>>>>>>>> +} >>>>>>>>> + >>>>>>>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>>>>>>> struct ieee80211_txq *txq) >>>>>>>>> __acquires(txq_lock) __releases(txq_lock) >>>>>>>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>>>>>>> ieee80211_hw *hw, >>>>>>>>> struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>> >>>>>>>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>> + ieee80211_remove_txq(hw, txq); >>>>>>>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>> } >>>>>>>>> >>>>>>>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>>>>>>> ieee80211_hw >>>>>>>>> *hw, >>>>>>>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>> >>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>>>>>>> - (skb_queue_empty(&txqi->frags) && >>>>>>>>> !txqi->tin.backlog_packets)) >>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>> + !txq_has_queue(&txqi->txq) && >>>>>>>>> + list_empty(&txqi->candidate)) >>>>>>>>> + list_add_tail(&txqi->candidate, >>>>>>>>> &local->remove_list[txq->ac]); >>>>>>>>> + >>>>>>>>> } >>>>>>>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>>>>>>> >>>>>>>>> +void __ieee80211_check_txqs(struct ieee80211_local *local, int >>>>>>>>> ac) >>>>>>>>> +{ >>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>> + struct sta_info *sta; >>>>>>>>> + >>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>>>>>>> + >>>>>>>>> + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], >>>>>>>>> + candidate) { >>>>>>>>> + sta = container_of(iter->txq.sta, struct sta_info, sta); >>>>>>>>> + >>>>>>>>> + if (txq_has_queue(&iter->txq)) >>>>>>>>> + list_del_init(&iter->candidate); >>>>>>>>> + else >>>>>>>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>>>>>>> + } >>>>>>>>> +} >>>>>>>>> + >>>>>>>>> +void ieee80211_txqs_check(struct timer_list *t) >>>>>>>>> +{ >>>>>>>>> + struct ieee80211_local *local = from_timer(local, t, >>>>>>>>> remove_timer); >>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>> + struct sta_info *sta; >>>>>>>>> + int ac; >>>>>>>>> + >>>>>>>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>>>>>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>> + __ieee80211_check_txqs(local, ac); >>>>>>>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>>>>>>> + } >>>>>>>>> + >>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>> + jiffies + >>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>> +} >>>>>>>> >>>>>>>> I'll ask the same as I did last time (where you told me to hold >>>>>>>> off >>>>>>>> until this round): >>>>>>>> >>>>>>>> Why do you need the timer and the periodic check? If TXQs are >>>>>>>> added >>>>>>>> to >>>>>>>> the remove list during the scheduling run, and >>>>>>>> __ieee80211_check_txqs() >>>>>>>> is run from schedule_end(), isn't that sufficient to clear the >>>>>>>> list? >>>>>>> Is it possible that a txq is not added to the remove list but then >>>>>>> packets in it are dropped by fq_codel algo? Like the station >>>>>>> disconnects >>>>>>> without any notification. >>>>>> >>>>>> Well as long as all the other cleanup paths call directly into >>>>>> __unschedule_txq(), that should remove stations from the scheduler >>>>>> when >>>>>> they disconnect etc. >>>>> Yes, the disconnect scenario is a bad example. My concern is, say, >>>>> we >>>>> have 10 stations and only one of them is assigned a very small >>>>> weight >>>>> compared with that of others. Suppose, after its chance of Tx, it is >>>>> most likely to be placed in the rightmost(still has some packets in >>>>> the >>>>> txq) and no more incoming data for it. The remaining packets in txq >>>>> will >>>>> be dropped due to timeout algo in codel(correct me if I am wrong) >>>>> but >>>>> this empty txq will stay on the rbtree until other txqs get drained >>>>> or >>>>> global vt catch up with its vt. The staying time could be long if >>>>> weight >>>>> is extremely small. Then do we need timer to check or any other >>>>> better >>>>> solution? >>>> >>>> Ah, I see what you mean. No, I don't think this will be a problem; >>>> the >>>> scenario you're describing would play out like this: >>>> >>>> 1. Station ends transmitting, still has a single packet queued, gets >>>> moved to the end of the rbtree (and stays there for a while). >>>> >>>> 2. When we finally get to the point where this station gets another >>>> chance to transmit, the CoDel drop timer triggers and the last >>>> packet >>>> is dropped[0]. This means that the queue will just be empty >>>> (and ieee80211_tx_dequeue() will return NULL). >>>> >>>> 3. Because the queue is empty, ieee80211_return_txq() will not put it >>>> back on the rbtree. >>>> >>>> Crucially, in 2. the CoDel algorithm doesn't kick in until the point >>>> of >>>> packet dequeue. But even if an empty queue stays on the rbtree for a >>>> while, there is no harm in that: eventually it will get its turn, it >>>> will turn out to be empty, and just be skipped over. >>> Then that will be fine. Thanks for the explanation of the dropping >>> part >>> in CoDel algorithm. >> >> Yup, think so. And you're welcome :) >> >>>> The issue we need to be concerned about is the opposite: If we have a >>>> queue that *does* have packets queued, but which is *not* scheduled >>>> for >>>> transmission, that will stall TX. >>> Is it by design since its vt is more than global vt, right? The >>> lattency >>> may somehow get impacted though. >> >> Well, it should still stay on the rbtree as long as it has packets >> queued. We don't have a check anywhere that reschedules TXQs whose v_t >> drops below global v_t... >> >>>> [0] CoDel in most cases only drops a single packet at a time, so it >>>> will >>>> not clear out an entire queue with multiple packets in one go. But >>>> you >>>> are right that it could conceivably drop the last packet in a queue. >>>> >>>>>> We only need to defer removal inside a single "scheduling round" >>>>>> (i.e., >>>>>> between a pair of ieee80211_txq_schedule_start/end. So if we just >>>>>> walk >>>>>> the remove list in schedule_end() we should be enough, no? >>>>>> >>>>>> Hmm, or maybe a simpler way to fix the original issue is just to >>>>>> have >>>>>> unschedule_txq() update the schedule_pos() pointer? >>>>>> >>>>>> I.e., unschedule_txq checks if the txq being removed is currently >>>>>> being >>>>>> pointed to by schedule_pos[ac], and if it is, it updates >>>>>> schedule_pos >>>>>> to >>>>>> be the rb_next of the current value? >>>>> Actually, if schedule_pos is updated to rb_next of the current >>>>> value, >>>>> then in the next_txq() where we are going to use rb_next again and >>>>> finally pick the next node of the node we really want. Is it fine to >>>>> update schedule_pos to NULL? >>>> >>>> Hmm, yeah, good point. >>>> >>>> If we do end up setting schedule_pos to NULL in the middle of a >>>> scheduling round, that will make next_txq() "start over", and do >>>> another >>>> loop through the whole thing. I guess we may be able hit a case where >>>> things can oscillate back and forth between addition and removal >>>> resulting in an infinite loop? Not sure, but at least I can't seem to >>>> convince myself that this can't happen. >>> >>> As the loop of next_txq under lock protection as below, >>> >>> txq_schedule_start(); >>> while(txq=next_txq()){ >>> ... >>> return_txq(txq); >>> } >>> txq_schedule_end(); >>> >>> I do not see any chance of addition, no? >> >> As you noted in your other email, Felix reduced the locking. And yeah, >> we need to rebase this series to also incorporate that. I figure I can >> send an updated version of the first patch in the series once we've >> worked out the remaining issues with your follow-up patches. >> > Oh, I was thinking we were discussing without locking reduced. Yes, I > also agree there might be a case causing infinite loop. With locking > reduced, the tree can be adjusted between next_txq() and return_txq() in > the loop situation. For further discussion, let 's consider, > 1) the tree starts like: > A->B->C->D->E > 2) then next_txq() returns A for dequeuing > 3) driver dequeues A and draines A without any active txq locked meaning > the tree could be changed upon Tx compeletion. > 4) then in return_txq(), the tree could be, > i A->B->C->D->E （A is empty, and maybe soon be added back > before the loop end） > ii B->C->A->D->E （A is empty, and maybe soon be added back > before the loop end） > iii B->C->D->E->A （A is empty, and maybe soon be added back > before the loop end) > > with this change: > local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); > > for case i, local->schedule_pos[ac] is rb_next(A) which is B, and in > next_txq(), rb_next(B) is what we returns which actually is C and B is > skipped, no? > > Similiar for case ii, we skip B, C, D. Yup, I think you're right. But if we can fix this by making ieee80211_resort_txq() aware of the schedule_pos as well, no? I.e., if resort_txq() acts on the txq that's currently in schedule_pos, it will update schedule pos with the same rb_next(node) ?: rb_prev(node); (optionally after checking that the position of the node is actually going to change). > Also I am wondering if there will be some SMP issues relating with > local->schedule_pos[ac]. Not sure what you mean by this? >>> In ath10k, we will usually push packets of first txq as many as we can >>> until it is drained and then move to the next one. So if a txq gets >>> removed in the return_txq, it should always be the leftmost. And >>> during this period, neither vt of any station or global vt can be >>> updated due to lock protection. >>> >>>> >>>> But in that case, we could fix it by just conditionally assigning >>>> either >>>> rb_next or rb_prev to the schedule_pos in unschedule_txq()? I.e., >>>> something like: >>>> >>>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>> I am not sure I am getting your point. Still in next_txq, >>> schedule_pos[ac] will lead us to the next node of the one we want. >> >> The logic in next_txq is different when schedule_pos[ac] is NULL, vs >> when rb_next(schedule_pos[ac]) is NULL. The former restarts a new >> scheduling round, while the latter ends the current round. >> >> -Toke > > -- > Yibo
On 2019-09-21 19:27, Toke Høiland-Jørgensen wrote: > Yibo Zhao <yiboz@codeaurora.org> writes: > >> On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: >>> Yibo Zhao <yiboz@codeaurora.org> writes: >>> >>>> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>> >>>>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>> >>>>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>> >>>>>>>>>> In a loop txqs dequeue scenario, if the first txq in the >>>>>>>>>> rbtree >>>>>>>>>> gets >>>>>>>>>> removed from rbtree immediately in the ieee80211_return_txq(), >>>>>>>>>> the >>>>>>>>>> loop will break soon in the ieee80211_next_txq() due to >>>>>>>>>> schedule_pos >>>>>>>>>> not leading to the second txq in the rbtree. Thus, defering >>>>>>>>>> the >>>>>>>>>> removal right before the end of this schedule round. >>>>>>>>>> >>>>>>>>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>>>>>>>> >>>>>>>>> I didn't write this patch, so please don't use my sign-off. >>>>>>>>> I'll >>>>>>>>> add >>>>>>>>> ack or review tags as appropriate in reply; but a few comments >>>>>>>>> first: >>>>>>>>> >>>>>>>>>> --- >>>>>>>>>> include/net/mac80211.h | 16 ++++++++++-- >>>>>>>>>> net/mac80211/ieee80211_i.h | 3 +++ >>>>>>>>>> net/mac80211/main.c | 6 +++++ >>>>>>>>>> net/mac80211/tx.c | 63 >>>>>>>>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>>>>>>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>>>>>>>> >>>>>>>>>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>>>>>>>>> index ac2ed8e..ba5a345 100644 >>>>>>>>>> --- a/include/net/mac80211.h >>>>>>>>>> +++ b/include/net/mac80211.h >>>>>>>>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>>>>>>>> >>>>>>>>>> #define IEEE80211_MAX_TX_RETRY 31 >>>>>>>>>> >>>>>>>>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>>>>>>>> + >>>>>>>>>> static inline void ieee80211_rate_set_vht(struct >>>>>>>>>> ieee80211_tx_rate >>>>>>>>>> *rate, >>>>>>>>>> u8 mcs, u8 nss) >>>>>>>>>> { >>>>>>>>>> @@ -6232,7 +6234,8 @@ struct sk_buff >>>>>>>>>> *ieee80211_tx_dequeue(struct >>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>> * @ac: AC number to return packets from. >>>>>>>>>> * >>>>>>>>>> * Should only be called between calls to >>>>>>>>>> ieee80211_txq_schedule_start() >>>>>>>>>> - * and ieee80211_txq_schedule_end(). >>>>>>>>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, it >>>>>>>>>> will >>>>>>>>>> be >>>>>>>>>> added >>>>>>>>>> + * to a remove list and get removed later. >>>>>>>>>> * Returns the next txq if successful, %NULL if no queue is >>>>>>>>>> eligible. >>>>>>>>>> If a txq >>>>>>>>>> * is returned, it should be returned with >>>>>>>>>> ieee80211_return_txq() >>>>>>>>>> after the >>>>>>>>>> * driver has finished scheduling it. >>>>>>>>>> @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct >>>>>>>>>> ieee80211_hw *hw, u8 ac) >>>>>>>>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>>>>>>>> * @ac: AC number to acquire locks for >>>>>>>>>> * >>>>>>>>>> - * Release locks previously acquired by >>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>> + * Release locks previously acquired by >>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>> Check >>>>>>>>>> + * and remove the empty txq from rb-tree. >>>>>>>>>> */ >>>>>>>>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 >>>>>>>>>> ac) >>>>>>>>>> __releases(txq_lock); >>>>>>>>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>>>>>>>> ieee80211_hw >>>>>>>>>> *hw, struct ieee80211_txq *txq) >>>>>>>>>> __acquires(txq_lock) __releases(txq_lock); >>>>>>>>>> >>>>>>>>>> /** >>>>>>>>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>>>>>>>> + * >>>>>>>>>> + * @tmr: pointer as obtained from local >>>>>>>>>> + * >>>>>>>>>> + */ >>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>>>>>>>> + >>>>>>>>>> +/** >>>>>>>>>> * ieee80211_txq_may_transmit - check whether TXQ is allowed >>>>>>>>>> to >>>>>>>>>> transmit >>>>>>>>>> * >>>>>>>>>> * This function is used to check whether given txq is >>>>>>>>>> allowed >>>>>>>>>> to >>>>>>>>>> transmit by >>>>>>>>>> diff --git a/net/mac80211/ieee80211_i.h >>>>>>>>>> b/net/mac80211/ieee80211_i.h >>>>>>>>>> index a4556f9..49aa143e 100644 >>>>>>>>>> --- a/net/mac80211/ieee80211_i.h >>>>>>>>>> +++ b/net/mac80211/ieee80211_i.h >>>>>>>>>> @@ -847,6 +847,7 @@ struct txq_info { >>>>>>>>>> struct codel_stats cstats; >>>>>>>>>> struct sk_buff_head frags; >>>>>>>>>> struct rb_node schedule_order; >>>>>>>>>> + struct list_head candidate; >>>>>>>>>> unsigned long flags; >>>>>>>>>> >>>>>>>>>> /* keep last! */ >>>>>>>>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>>>>>>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>>>>>>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>>>>>>>> >>>>>>>>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>>>>>>>> + struct timer_list remove_timer; >>>>>>>>>> u16 airtime_flags; >>>>>>>>>> >>>>>>>>>> const struct ieee80211_ops *ops; >>>>>>>>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>>>>>>>> index e9ffa8e..78fe24a 100644 >>>>>>>>>> --- a/net/mac80211/main.c >>>>>>>>>> +++ b/net/mac80211/main.c >>>>>>>>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>>>>>>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>>>>>>>> >>>>>>>>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>>>>>>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>>>>>>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>>>>>>>> spin_lock_init(&local->active_txq_lock[i]); >>>>>>>>>> } >>>>>>>>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>>>>>>>> >>>>>>>>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); >>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>> + jiffies + >>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>> + >>>>>>>>>> INIT_LIST_HEAD(&local->chanctx_list); >>>>>>>>>> mutex_init(&local->chanctx_mtx); >>>>>>>>>> >>>>>>>>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>>>>>>>> ieee80211_hw >>>>>>>>>> *hw) >>>>>>>>>> tasklet_kill(&local->tx_pending_tasklet); >>>>>>>>>> tasklet_kill(&local->tasklet); >>>>>>>>>> >>>>>>>>>> + del_timer_sync(&local->remove_timer); >>>>>>>>>> #ifdef CONFIG_INET >>>>>>>>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>>>>>>>> #endif >>>>>>>>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>>>>>>>> index d00baaa..42ca010 100644 >>>>>>>>>> --- a/net/mac80211/tx.c >>>>>>>>>> +++ b/net/mac80211/tx.c >>>>>>>>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>>>>>>>> ieee80211_sub_if_data *sdata, >>>>>>>>>> codel_stats_init(&txqi->cstats); >>>>>>>>>> __skb_queue_head_init(&txqi->frags); >>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>> + INIT_LIST_HEAD(&txqi->candidate); >>>>>>>>>> >>>>>>>>>> txqi->txq.vif = &sdata->vif; >>>>>>>>>> >>>>>>>>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>>>>>>>> ieee80211_hw >>>>>>>>>> *hw, >>>>>>>>>> >>>>>>>>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>> >>>>>>>>>> + if (!list_empty(&txqi->candidate)) >>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>> + >>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>>>>>>>> goto out; >>>>>>>>>> >>>>>>>>>> @@ -3783,6 +3787,20 @@ static void >>>>>>>>>> __ieee80211_unschedule_txq(struct >>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>>>>>>>> + struct ieee80211_txq *txq) >>>>>>>>>> +{ >>>>>>>>>> + struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>> + struct txq_info *txqi = to_txq_info(txq); >>>>>>>>>> + >>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>> + >>>>>>>>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>>>>>>>> + __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>> + } >>>>>>>>>> +} >>>>>>>>>> + >>>>>>>>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>>>>>>>> struct ieee80211_txq *txq) >>>>>>>>>> __acquires(txq_lock) __releases(txq_lock) >>>>>>>>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>> struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>> >>>>>>>>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>> + ieee80211_remove_txq(hw, txq); >>>>>>>>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>>>>>>>> ieee80211_hw >>>>>>>>>> *hw, >>>>>>>>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>> >>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>>>>>>>> - (skb_queue_empty(&txqi->frags) && >>>>>>>>>> !txqi->tin.backlog_packets)) >>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>> + !txq_has_queue(&txqi->txq) && >>>>>>>>>> + list_empty(&txqi->candidate)) >>>>>>>>>> + list_add_tail(&txqi->candidate, >>>>>>>>>> &local->remove_list[txq->ac]); >>>>>>>>>> + >>>>>>>>>> } >>>>>>>>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>>>>>>>> >>>>>>>>>> +void __ieee80211_check_txqs(struct ieee80211_local *local, >>>>>>>>>> int >>>>>>>>>> ac) >>>>>>>>>> +{ >>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>> + struct sta_info *sta; >>>>>>>>>> + >>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>>>>>>>> + >>>>>>>>>> + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], >>>>>>>>>> + candidate) { >>>>>>>>>> + sta = container_of(iter->txq.sta, struct sta_info, sta); >>>>>>>>>> + >>>>>>>>>> + if (txq_has_queue(&iter->txq)) >>>>>>>>>> + list_del_init(&iter->candidate); >>>>>>>>>> + else >>>>>>>>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>>>>>>>> + } >>>>>>>>>> +} >>>>>>>>>> + >>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *t) >>>>>>>>>> +{ >>>>>>>>>> + struct ieee80211_local *local = from_timer(local, t, >>>>>>>>>> remove_timer); >>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>> + struct sta_info *sta; >>>>>>>>>> + int ac; >>>>>>>>>> + >>>>>>>>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>>>>>>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>> + __ieee80211_check_txqs(local, ac); >>>>>>>>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>>>>>>>> + } >>>>>>>>>> + >>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>> + jiffies + >>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>> +} >>>>>>>>> >>>>>>>>> I'll ask the same as I did last time (where you told me to hold >>>>>>>>> off >>>>>>>>> until this round): >>>>>>>>> >>>>>>>>> Why do you need the timer and the periodic check? If TXQs are >>>>>>>>> added >>>>>>>>> to >>>>>>>>> the remove list during the scheduling run, and >>>>>>>>> __ieee80211_check_txqs() >>>>>>>>> is run from schedule_end(), isn't that sufficient to clear the >>>>>>>>> list? >>>>>>>> Is it possible that a txq is not added to the remove list but >>>>>>>> then >>>>>>>> packets in it are dropped by fq_codel algo? Like the station >>>>>>>> disconnects >>>>>>>> without any notification. >>>>>>> >>>>>>> Well as long as all the other cleanup paths call directly into >>>>>>> __unschedule_txq(), that should remove stations from the >>>>>>> scheduler >>>>>>> when >>>>>>> they disconnect etc. >>>>>> Yes, the disconnect scenario is a bad example. My concern is, say, >>>>>> we >>>>>> have 10 stations and only one of them is assigned a very small >>>>>> weight >>>>>> compared with that of others. Suppose, after its chance of Tx, it >>>>>> is >>>>>> most likely to be placed in the rightmost(still has some packets >>>>>> in >>>>>> the >>>>>> txq) and no more incoming data for it. The remaining packets in >>>>>> txq >>>>>> will >>>>>> be dropped due to timeout algo in codel(correct me if I am wrong) >>>>>> but >>>>>> this empty txq will stay on the rbtree until other txqs get >>>>>> drained >>>>>> or >>>>>> global vt catch up with its vt. The staying time could be long if >>>>>> weight >>>>>> is extremely small. Then do we need timer to check or any other >>>>>> better >>>>>> solution? >>>>> >>>>> Ah, I see what you mean. No, I don't think this will be a problem; >>>>> the >>>>> scenario you're describing would play out like this: >>>>> >>>>> 1. Station ends transmitting, still has a single packet queued, >>>>> gets >>>>> moved to the end of the rbtree (and stays there for a while). >>>>> >>>>> 2. When we finally get to the point where this station gets another >>>>> chance to transmit, the CoDel drop timer triggers and the last >>>>> packet >>>>> is dropped[0]. This means that the queue will just be empty >>>>> (and ieee80211_tx_dequeue() will return NULL). >>>>> >>>>> 3. Because the queue is empty, ieee80211_return_txq() will not put >>>>> it >>>>> back on the rbtree. >>>>> >>>>> Crucially, in 2. the CoDel algorithm doesn't kick in until the >>>>> point >>>>> of >>>>> packet dequeue. But even if an empty queue stays on the rbtree for >>>>> a >>>>> while, there is no harm in that: eventually it will get its turn, >>>>> it >>>>> will turn out to be empty, and just be skipped over. >>>> Then that will be fine. Thanks for the explanation of the dropping >>>> part >>>> in CoDel algorithm. >>> >>> Yup, think so. And you're welcome :) >>> >>>>> The issue we need to be concerned about is the opposite: If we have >>>>> a >>>>> queue that *does* have packets queued, but which is *not* scheduled >>>>> for >>>>> transmission, that will stall TX. >>>> Is it by design since its vt is more than global vt, right? The >>>> lattency >>>> may somehow get impacted though. >>> >>> Well, it should still stay on the rbtree as long as it has packets >>> queued. We don't have a check anywhere that reschedules TXQs whose >>> v_t >>> drops below global v_t... >>> >>>>> [0] CoDel in most cases only drops a single packet at a time, so it >>>>> will >>>>> not clear out an entire queue with multiple packets in one go. But >>>>> you >>>>> are right that it could conceivably drop the last packet in a >>>>> queue. >>>>> >>>>>>> We only need to defer removal inside a single "scheduling round" >>>>>>> (i.e., >>>>>>> between a pair of ieee80211_txq_schedule_start/end. So if we just >>>>>>> walk >>>>>>> the remove list in schedule_end() we should be enough, no? >>>>>>> >>>>>>> Hmm, or maybe a simpler way to fix the original issue is just to >>>>>>> have >>>>>>> unschedule_txq() update the schedule_pos() pointer? >>>>>>> >>>>>>> I.e., unschedule_txq checks if the txq being removed is currently >>>>>>> being >>>>>>> pointed to by schedule_pos[ac], and if it is, it updates >>>>>>> schedule_pos >>>>>>> to >>>>>>> be the rb_next of the current value? >>>>>> Actually, if schedule_pos is updated to rb_next of the current >>>>>> value, >>>>>> then in the next_txq() where we are going to use rb_next again and >>>>>> finally pick the next node of the node we really want. Is it fine >>>>>> to >>>>>> update schedule_pos to NULL? >>>>> >>>>> Hmm, yeah, good point. >>>>> >>>>> If we do end up setting schedule_pos to NULL in the middle of a >>>>> scheduling round, that will make next_txq() "start over", and do >>>>> another >>>>> loop through the whole thing. I guess we may be able hit a case >>>>> where >>>>> things can oscillate back and forth between addition and removal >>>>> resulting in an infinite loop? Not sure, but at least I can't seem >>>>> to >>>>> convince myself that this can't happen. >>>> >>>> As the loop of next_txq under lock protection as below, >>>> >>>> txq_schedule_start(); >>>> while(txq=next_txq()){ >>>> ... >>>> return_txq(txq); >>>> } >>>> txq_schedule_end(); >>>> >>>> I do not see any chance of addition, no? >>> >>> As you noted in your other email, Felix reduced the locking. And >>> yeah, >>> we need to rebase this series to also incorporate that. I figure I >>> can >>> send an updated version of the first patch in the series once we've >>> worked out the remaining issues with your follow-up patches. >>> >> Oh, I was thinking we were discussing without locking reduced. Yes, I >> also agree there might be a case causing infinite loop. With locking >> reduced, the tree can be adjusted between next_txq() and return_txq() >> in >> the loop situation. For further discussion, let 's consider, >> 1) the tree starts like: >> A->B->C->D->E >> 2) then next_txq() returns A for dequeuing >> 3) driver dequeues A and draines A without any active txq locked >> meaning >> the tree could be changed upon Tx compeletion. >> 4) then in return_txq(), the tree could be, >> i A->B->C->D->E （A is empty, and maybe soon be added back >> before the loop end） >> ii B->C->A->D->E （A is empty, and maybe soon be added back >> before the loop end） >> iii B->C->D->E->A （A is empty, and maybe soon be added back >> before the loop end) >> >> with this change: >> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >> >> for case i, local->schedule_pos[ac] is rb_next(A) which is B, and in >> next_txq(), rb_next(B) is what we returns which actually is C and B is >> skipped, no? >> >> Similiar for case ii, we skip B, C, D. > > Yup, I think you're right. But if we can fix this by making > ieee80211_resort_txq() aware of the schedule_pos as well, no? I.e., if > resort_txq() acts on the txq that's currently in schedule_pos, it will > update schedule pos with the same rb_next(node) ?: rb_prev(node); > (optionally after checking that the position of the node is actually > going to change). > >> Also I am wondering if there will be some SMP issues relating with >> local->schedule_pos[ac]. > > Not sure what you mean by this? > >>>> In ath10k, we will usually push packets of first txq as many as we >>>> can >>>> until it is drained and then move to the next one. So if a txq gets >>>> removed in the return_txq, it should always be the leftmost. And >>>> during this period, neither vt of any station or global vt can be >>>> updated due to lock protection. >>>> >>>>> >>>>> But in that case, we could fix it by just conditionally assigning >>>>> either >>>>> rb_next or rb_prev to the schedule_pos in unschedule_txq()? I.e., >>>>> something like: >>>>> >>>>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>>> I am not sure I am getting your point. Still in next_txq, >>>> schedule_pos[ac] will lead us to the next node of the one we want. >>> >>> The logic in next_txq is different when schedule_pos[ac] is NULL, vs >>> when rb_next(schedule_pos[ac]) is NULL. The former restarts a new >>> scheduling round, while the latter ends the current round. >>> >>> -Toke >> >> -- >> Yibo
On 2019-09-21 19:27, Toke Høiland-Jørgensen wrote: > Yibo Zhao <yiboz@codeaurora.org> writes: > >> On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: >>> Yibo Zhao <yiboz@codeaurora.org> writes: >>> >>>> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>> >>>>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>> >>>>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>> >>>>>>>>>> In a loop txqs dequeue scenario, if the first txq in the >>>>>>>>>> rbtree >>>>>>>>>> gets >>>>>>>>>> removed from rbtree immediately in the ieee80211_return_txq(), >>>>>>>>>> the >>>>>>>>>> loop will break soon in the ieee80211_next_txq() due to >>>>>>>>>> schedule_pos >>>>>>>>>> not leading to the second txq in the rbtree. Thus, defering >>>>>>>>>> the >>>>>>>>>> removal right before the end of this schedule round. >>>>>>>>>> >>>>>>>>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>>>>>>>> >>>>>>>>> I didn't write this patch, so please don't use my sign-off. >>>>>>>>> I'll >>>>>>>>> add >>>>>>>>> ack or review tags as appropriate in reply; but a few comments >>>>>>>>> first: >>>>>>>>> >>>>>>>>>> --- >>>>>>>>>> include/net/mac80211.h | 16 ++++++++++-- >>>>>>>>>> net/mac80211/ieee80211_i.h | 3 +++ >>>>>>>>>> net/mac80211/main.c | 6 +++++ >>>>>>>>>> net/mac80211/tx.c | 63 >>>>>>>>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>>>>>>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>>>>>>>> >>>>>>>>>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>>>>>>>>> index ac2ed8e..ba5a345 100644 >>>>>>>>>> --- a/include/net/mac80211.h >>>>>>>>>> +++ b/include/net/mac80211.h >>>>>>>>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>>>>>>>> >>>>>>>>>> #define IEEE80211_MAX_TX_RETRY 31 >>>>>>>>>> >>>>>>>>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>>>>>>>> + >>>>>>>>>> static inline void ieee80211_rate_set_vht(struct >>>>>>>>>> ieee80211_tx_rate >>>>>>>>>> *rate, >>>>>>>>>> u8 mcs, u8 nss) >>>>>>>>>> { >>>>>>>>>> @@ -6232,7 +6234,8 @@ struct sk_buff >>>>>>>>>> *ieee80211_tx_dequeue(struct >>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>> * @ac: AC number to return packets from. >>>>>>>>>> * >>>>>>>>>> * Should only be called between calls to >>>>>>>>>> ieee80211_txq_schedule_start() >>>>>>>>>> - * and ieee80211_txq_schedule_end(). >>>>>>>>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, it >>>>>>>>>> will >>>>>>>>>> be >>>>>>>>>> added >>>>>>>>>> + * to a remove list and get removed later. >>>>>>>>>> * Returns the next txq if successful, %NULL if no queue is >>>>>>>>>> eligible. >>>>>>>>>> If a txq >>>>>>>>>> * is returned, it should be returned with >>>>>>>>>> ieee80211_return_txq() >>>>>>>>>> after the >>>>>>>>>> * driver has finished scheduling it. >>>>>>>>>> @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct >>>>>>>>>> ieee80211_hw *hw, u8 ac) >>>>>>>>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>>>>>>>> * @ac: AC number to acquire locks for >>>>>>>>>> * >>>>>>>>>> - * Release locks previously acquired by >>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>> + * Release locks previously acquired by >>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>> Check >>>>>>>>>> + * and remove the empty txq from rb-tree. >>>>>>>>>> */ >>>>>>>>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 >>>>>>>>>> ac) >>>>>>>>>> __releases(txq_lock); >>>>>>>>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>>>>>>>> ieee80211_hw >>>>>>>>>> *hw, struct ieee80211_txq *txq) >>>>>>>>>> __acquires(txq_lock) __releases(txq_lock); >>>>>>>>>> >>>>>>>>>> /** >>>>>>>>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>>>>>>>> + * >>>>>>>>>> + * @tmr: pointer as obtained from local >>>>>>>>>> + * >>>>>>>>>> + */ >>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>>>>>>>> + >>>>>>>>>> +/** >>>>>>>>>> * ieee80211_txq_may_transmit - check whether TXQ is allowed >>>>>>>>>> to >>>>>>>>>> transmit >>>>>>>>>> * >>>>>>>>>> * This function is used to check whether given txq is >>>>>>>>>> allowed >>>>>>>>>> to >>>>>>>>>> transmit by >>>>>>>>>> diff --git a/net/mac80211/ieee80211_i.h >>>>>>>>>> b/net/mac80211/ieee80211_i.h >>>>>>>>>> index a4556f9..49aa143e 100644 >>>>>>>>>> --- a/net/mac80211/ieee80211_i.h >>>>>>>>>> +++ b/net/mac80211/ieee80211_i.h >>>>>>>>>> @@ -847,6 +847,7 @@ struct txq_info { >>>>>>>>>> struct codel_stats cstats; >>>>>>>>>> struct sk_buff_head frags; >>>>>>>>>> struct rb_node schedule_order; >>>>>>>>>> + struct list_head candidate; >>>>>>>>>> unsigned long flags; >>>>>>>>>> >>>>>>>>>> /* keep last! */ >>>>>>>>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>>>>>>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>>>>>>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>>>>>>>> >>>>>>>>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>>>>>>>> + struct timer_list remove_timer; >>>>>>>>>> u16 airtime_flags; >>>>>>>>>> >>>>>>>>>> const struct ieee80211_ops *ops; >>>>>>>>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>>>>>>>> index e9ffa8e..78fe24a 100644 >>>>>>>>>> --- a/net/mac80211/main.c >>>>>>>>>> +++ b/net/mac80211/main.c >>>>>>>>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>>>>>>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>>>>>>>> >>>>>>>>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>>>>>>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>>>>>>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>>>>>>>> spin_lock_init(&local->active_txq_lock[i]); >>>>>>>>>> } >>>>>>>>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>>>>>>>> >>>>>>>>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); >>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>> + jiffies + >>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>> + >>>>>>>>>> INIT_LIST_HEAD(&local->chanctx_list); >>>>>>>>>> mutex_init(&local->chanctx_mtx); >>>>>>>>>> >>>>>>>>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>>>>>>>> ieee80211_hw >>>>>>>>>> *hw) >>>>>>>>>> tasklet_kill(&local->tx_pending_tasklet); >>>>>>>>>> tasklet_kill(&local->tasklet); >>>>>>>>>> >>>>>>>>>> + del_timer_sync(&local->remove_timer); >>>>>>>>>> #ifdef CONFIG_INET >>>>>>>>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>>>>>>>> #endif >>>>>>>>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>>>>>>>> index d00baaa..42ca010 100644 >>>>>>>>>> --- a/net/mac80211/tx.c >>>>>>>>>> +++ b/net/mac80211/tx.c >>>>>>>>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>>>>>>>> ieee80211_sub_if_data *sdata, >>>>>>>>>> codel_stats_init(&txqi->cstats); >>>>>>>>>> __skb_queue_head_init(&txqi->frags); >>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>> + INIT_LIST_HEAD(&txqi->candidate); >>>>>>>>>> >>>>>>>>>> txqi->txq.vif = &sdata->vif; >>>>>>>>>> >>>>>>>>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>>>>>>>> ieee80211_hw >>>>>>>>>> *hw, >>>>>>>>>> >>>>>>>>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>> >>>>>>>>>> + if (!list_empty(&txqi->candidate)) >>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>> + >>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>>>>>>>> goto out; >>>>>>>>>> >>>>>>>>>> @@ -3783,6 +3787,20 @@ static void >>>>>>>>>> __ieee80211_unschedule_txq(struct >>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>>>>>>>> + struct ieee80211_txq *txq) >>>>>>>>>> +{ >>>>>>>>>> + struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>> + struct txq_info *txqi = to_txq_info(txq); >>>>>>>>>> + >>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>> + >>>>>>>>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>>>>>>>> + __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>> + } >>>>>>>>>> +} >>>>>>>>>> + >>>>>>>>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>>>>>>>> struct ieee80211_txq *txq) >>>>>>>>>> __acquires(txq_lock) __releases(txq_lock) >>>>>>>>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>> struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>> >>>>>>>>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>> + ieee80211_remove_txq(hw, txq); >>>>>>>>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>>>>>>>> ieee80211_hw >>>>>>>>>> *hw, >>>>>>>>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>> >>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>>>>>>>> - (skb_queue_empty(&txqi->frags) && >>>>>>>>>> !txqi->tin.backlog_packets)) >>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>> + !txq_has_queue(&txqi->txq) && >>>>>>>>>> + list_empty(&txqi->candidate)) >>>>>>>>>> + list_add_tail(&txqi->candidate, >>>>>>>>>> &local->remove_list[txq->ac]); >>>>>>>>>> + >>>>>>>>>> } >>>>>>>>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>>>>>>>> >>>>>>>>>> +void __ieee80211_check_txqs(struct ieee80211_local *local, >>>>>>>>>> int >>>>>>>>>> ac) >>>>>>>>>> +{ >>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>> + struct sta_info *sta; >>>>>>>>>> + >>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>>>>>>>> + >>>>>>>>>> + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], >>>>>>>>>> + candidate) { >>>>>>>>>> + sta = container_of(iter->txq.sta, struct sta_info, sta); >>>>>>>>>> + >>>>>>>>>> + if (txq_has_queue(&iter->txq)) >>>>>>>>>> + list_del_init(&iter->candidate); >>>>>>>>>> + else >>>>>>>>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>>>>>>>> + } >>>>>>>>>> +} >>>>>>>>>> + >>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *t) >>>>>>>>>> +{ >>>>>>>>>> + struct ieee80211_local *local = from_timer(local, t, >>>>>>>>>> remove_timer); >>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>> + struct sta_info *sta; >>>>>>>>>> + int ac; >>>>>>>>>> + >>>>>>>>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>>>>>>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>> + __ieee80211_check_txqs(local, ac); >>>>>>>>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>>>>>>>> + } >>>>>>>>>> + >>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>> + jiffies + >>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>> +} >>>>>>>>> >>>>>>>>> I'll ask the same as I did last time (where you told me to hold >>>>>>>>> off >>>>>>>>> until this round): >>>>>>>>> >>>>>>>>> Why do you need the timer and the periodic check? If TXQs are >>>>>>>>> added >>>>>>>>> to >>>>>>>>> the remove list during the scheduling run, and >>>>>>>>> __ieee80211_check_txqs() >>>>>>>>> is run from schedule_end(), isn't that sufficient to clear the >>>>>>>>> list? >>>>>>>> Is it possible that a txq is not added to the remove list but >>>>>>>> then >>>>>>>> packets in it are dropped by fq_codel algo? Like the station >>>>>>>> disconnects >>>>>>>> without any notification. >>>>>>> >>>>>>> Well as long as all the other cleanup paths call directly into >>>>>>> __unschedule_txq(), that should remove stations from the >>>>>>> scheduler >>>>>>> when >>>>>>> they disconnect etc. >>>>>> Yes, the disconnect scenario is a bad example. My concern is, say, >>>>>> we >>>>>> have 10 stations and only one of them is assigned a very small >>>>>> weight >>>>>> compared with that of others. Suppose, after its chance of Tx, it >>>>>> is >>>>>> most likely to be placed in the rightmost(still has some packets >>>>>> in >>>>>> the >>>>>> txq) and no more incoming data for it. The remaining packets in >>>>>> txq >>>>>> will >>>>>> be dropped due to timeout algo in codel(correct me if I am wrong) >>>>>> but >>>>>> this empty txq will stay on the rbtree until other txqs get >>>>>> drained >>>>>> or >>>>>> global vt catch up with its vt. The staying time could be long if >>>>>> weight >>>>>> is extremely small. Then do we need timer to check or any other >>>>>> better >>>>>> solution? >>>>> >>>>> Ah, I see what you mean. No, I don't think this will be a problem; >>>>> the >>>>> scenario you're describing would play out like this: >>>>> >>>>> 1. Station ends transmitting, still has a single packet queued, >>>>> gets >>>>> moved to the end of the rbtree (and stays there for a while). >>>>> >>>>> 2. When we finally get to the point where this station gets another >>>>> chance to transmit, the CoDel drop timer triggers and the last >>>>> packet >>>>> is dropped[0]. This means that the queue will just be empty >>>>> (and ieee80211_tx_dequeue() will return NULL). >>>>> >>>>> 3. Because the queue is empty, ieee80211_return_txq() will not put >>>>> it >>>>> back on the rbtree. >>>>> >>>>> Crucially, in 2. the CoDel algorithm doesn't kick in until the >>>>> point >>>>> of >>>>> packet dequeue. But even if an empty queue stays on the rbtree for >>>>> a >>>>> while, there is no harm in that: eventually it will get its turn, >>>>> it >>>>> will turn out to be empty, and just be skipped over. >>>> Then that will be fine. Thanks for the explanation of the dropping >>>> part >>>> in CoDel algorithm. >>> >>> Yup, think so. And you're welcome :) >>> >>>>> The issue we need to be concerned about is the opposite: If we have >>>>> a >>>>> queue that *does* have packets queued, but which is *not* scheduled >>>>> for >>>>> transmission, that will stall TX. >>>> Is it by design since its vt is more than global vt, right? The >>>> lattency >>>> may somehow get impacted though. >>> >>> Well, it should still stay on the rbtree as long as it has packets >>> queued. We don't have a check anywhere that reschedules TXQs whose >>> v_t >>> drops below global v_t... >>> >>>>> [0] CoDel in most cases only drops a single packet at a time, so it >>>>> will >>>>> not clear out an entire queue with multiple packets in one go. But >>>>> you >>>>> are right that it could conceivably drop the last packet in a >>>>> queue. >>>>> >>>>>>> We only need to defer removal inside a single "scheduling round" >>>>>>> (i.e., >>>>>>> between a pair of ieee80211_txq_schedule_start/end. So if we just >>>>>>> walk >>>>>>> the remove list in schedule_end() we should be enough, no? >>>>>>> >>>>>>> Hmm, or maybe a simpler way to fix the original issue is just to >>>>>>> have >>>>>>> unschedule_txq() update the schedule_pos() pointer? >>>>>>> >>>>>>> I.e., unschedule_txq checks if the txq being removed is currently >>>>>>> being >>>>>>> pointed to by schedule_pos[ac], and if it is, it updates >>>>>>> schedule_pos >>>>>>> to >>>>>>> be the rb_next of the current value? >>>>>> Actually, if schedule_pos is updated to rb_next of the current >>>>>> value, >>>>>> then in the next_txq() where we are going to use rb_next again and >>>>>> finally pick the next node of the node we really want. Is it fine >>>>>> to >>>>>> update schedule_pos to NULL? >>>>> >>>>> Hmm, yeah, good point. >>>>> >>>>> If we do end up setting schedule_pos to NULL in the middle of a >>>>> scheduling round, that will make next_txq() "start over", and do >>>>> another >>>>> loop through the whole thing. I guess we may be able hit a case >>>>> where >>>>> things can oscillate back and forth between addition and removal >>>>> resulting in an infinite loop? Not sure, but at least I can't seem >>>>> to >>>>> convince myself that this can't happen. >>>> >>>> As the loop of next_txq under lock protection as below, >>>> >>>> txq_schedule_start(); >>>> while(txq=next_txq()){ >>>> ... >>>> return_txq(txq); >>>> } >>>> txq_schedule_end(); >>>> >>>> I do not see any chance of addition, no? >>> >>> As you noted in your other email, Felix reduced the locking. And >>> yeah, >>> we need to rebase this series to also incorporate that. I figure I >>> can >>> send an updated version of the first patch in the series once we've >>> worked out the remaining issues with your follow-up patches. >>> >> Oh, I was thinking we were discussing without locking reduced. Yes, I >> also agree there might be a case causing infinite loop. With locking >> reduced, the tree can be adjusted between next_txq() and return_txq() >> in >> the loop situation. For further discussion, let 's consider, >> 1) the tree starts like: >> A->B->C->D->E >> 2) then next_txq() returns A for dequeuing >> 3) driver dequeues A and draines A without any active txq locked >> meaning >> the tree could be changed upon Tx compeletion. >> 4) then in return_txq(), the tree could be, >> i A->B->C->D->E （A is empty, and maybe soon be added back >> before the loop end） >> ii B->C->A->D->E （A is empty, and maybe soon be added back >> before the loop end） >> iii B->C->D->E->A （A is empty, and maybe soon be added back >> before the loop end) >> >> with this change: >> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >> >> for case i, local->schedule_pos[ac] is rb_next(A) which is B, and in >> next_txq(), rb_next(B) is what we returns which actually is C and B is >> skipped, no? >> >> Similiar for case ii, we skip B, C, D. > > Yup, I think you're right. But if we can fix this by making > ieee80211_resort_txq() aware of the schedule_pos as well, no? I.e., if > resort_txq() acts on the txq that's currently in schedule_pos, it will > update schedule pos with the same rb_next(node) ?: rb_prev(node); > (optionally after checking that the position of the node is actually > going to change). Sorry, please igore last email sent by mistake. I don't think it makes any difference with that in unschedule_txq(). For case i, it finally picks C as well in next_txq(). For next_txq(), schedule_pos means previous candidate node whereas with your change, it looks like schedule_pos is current candidate node instead. >> Also I am wondering if there will be some SMP issues relating with >> local->schedule_pos[ac]. > > Not sure what you mean by this? My bad. Please ignore this. > >>>> In ath10k, we will usually push packets of first txq as many as we >>>> can >>>> until it is drained and then move to the next one. So if a txq gets >>>> removed in the return_txq, it should always be the leftmost. And >>>> during this period, neither vt of any station or global vt can be >>>> updated due to lock protection. >>>> >>>>> >>>>> But in that case, we could fix it by just conditionally assigning >>>>> either >>>>> rb_next or rb_prev to the schedule_pos in unschedule_txq()? I.e., >>>>> something like: >>>>> >>>>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>>> I am not sure I am getting your point. Still in next_txq, >>>> schedule_pos[ac] will lead us to the next node of the one we want. >>> >>> The logic in next_txq is different when schedule_pos[ac] is NULL, vs >>> when rb_next(schedule_pos[ac]) is NULL. The former restarts a new >>> scheduling round, while the latter ends the current round. >>> >>> -Toke >> >> -- >> Yibo
Yibo Zhao <yiboz@codeaurora.org> writes: > On 2019-09-21 19:27, Toke Høiland-Jørgensen wrote: >> Yibo Zhao <yiboz@codeaurora.org> writes: >> >>> On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: >>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>> >>>>> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>> >>>>>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>> >>>>>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>> >>>>>>>>>>> In a loop txqs dequeue scenario, if the first txq in the >>>>>>>>>>> rbtree >>>>>>>>>>> gets >>>>>>>>>>> removed from rbtree immediately in the ieee80211_return_txq(), >>>>>>>>>>> the >>>>>>>>>>> loop will break soon in the ieee80211_next_txq() due to >>>>>>>>>>> schedule_pos >>>>>>>>>>> not leading to the second txq in the rbtree. Thus, defering >>>>>>>>>>> the >>>>>>>>>>> removal right before the end of this schedule round. >>>>>>>>>>> >>>>>>>>>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>>>>>>>>> >>>>>>>>>> I didn't write this patch, so please don't use my sign-off. >>>>>>>>>> I'll >>>>>>>>>> add >>>>>>>>>> ack or review tags as appropriate in reply; but a few comments >>>>>>>>>> first: >>>>>>>>>> >>>>>>>>>>> --- >>>>>>>>>>> include/net/mac80211.h | 16 ++++++++++-- >>>>>>>>>>> net/mac80211/ieee80211_i.h | 3 +++ >>>>>>>>>>> net/mac80211/main.c | 6 +++++ >>>>>>>>>>> net/mac80211/tx.c | 63 >>>>>>>>>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>>>>>>>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>>>>>>>>> >>>>>>>>>>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>>>>>>>>>> index ac2ed8e..ba5a345 100644 >>>>>>>>>>> --- a/include/net/mac80211.h >>>>>>>>>>> +++ b/include/net/mac80211.h >>>>>>>>>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>>>>>>>>> >>>>>>>>>>> #define IEEE80211_MAX_TX_RETRY 31 >>>>>>>>>>> >>>>>>>>>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>>>>>>>>> + >>>>>>>>>>> static inline void ieee80211_rate_set_vht(struct >>>>>>>>>>> ieee80211_tx_rate >>>>>>>>>>> *rate, >>>>>>>>>>> u8 mcs, u8 nss) >>>>>>>>>>> { >>>>>>>>>>> @@ -6232,7 +6234,8 @@ struct sk_buff >>>>>>>>>>> *ieee80211_tx_dequeue(struct >>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>> * @ac: AC number to return packets from. >>>>>>>>>>> * >>>>>>>>>>> * Should only be called between calls to >>>>>>>>>>> ieee80211_txq_schedule_start() >>>>>>>>>>> - * and ieee80211_txq_schedule_end(). >>>>>>>>>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, it >>>>>>>>>>> will >>>>>>>>>>> be >>>>>>>>>>> added >>>>>>>>>>> + * to a remove list and get removed later. >>>>>>>>>>> * Returns the next txq if successful, %NULL if no queue is >>>>>>>>>>> eligible. >>>>>>>>>>> If a txq >>>>>>>>>>> * is returned, it should be returned with >>>>>>>>>>> ieee80211_return_txq() >>>>>>>>>>> after the >>>>>>>>>>> * driver has finished scheduling it. >>>>>>>>>>> @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct >>>>>>>>>>> ieee80211_hw *hw, u8 ac) >>>>>>>>>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>>>>>>>>> * @ac: AC number to acquire locks for >>>>>>>>>>> * >>>>>>>>>>> - * Release locks previously acquired by >>>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>>> + * Release locks previously acquired by >>>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>>> Check >>>>>>>>>>> + * and remove the empty txq from rb-tree. >>>>>>>>>>> */ >>>>>>>>>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 >>>>>>>>>>> ac) >>>>>>>>>>> __releases(txq_lock); >>>>>>>>>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>>>>>>>>> ieee80211_hw >>>>>>>>>>> *hw, struct ieee80211_txq *txq) >>>>>>>>>>> __acquires(txq_lock) __releases(txq_lock); >>>>>>>>>>> >>>>>>>>>>> /** >>>>>>>>>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>>>>>>>>> + * >>>>>>>>>>> + * @tmr: pointer as obtained from local >>>>>>>>>>> + * >>>>>>>>>>> + */ >>>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>>>>>>>>> + >>>>>>>>>>> +/** >>>>>>>>>>> * ieee80211_txq_may_transmit - check whether TXQ is allowed >>>>>>>>>>> to >>>>>>>>>>> transmit >>>>>>>>>>> * >>>>>>>>>>> * This function is used to check whether given txq is >>>>>>>>>>> allowed >>>>>>>>>>> to >>>>>>>>>>> transmit by >>>>>>>>>>> diff --git a/net/mac80211/ieee80211_i.h >>>>>>>>>>> b/net/mac80211/ieee80211_i.h >>>>>>>>>>> index a4556f9..49aa143e 100644 >>>>>>>>>>> --- a/net/mac80211/ieee80211_i.h >>>>>>>>>>> +++ b/net/mac80211/ieee80211_i.h >>>>>>>>>>> @@ -847,6 +847,7 @@ struct txq_info { >>>>>>>>>>> struct codel_stats cstats; >>>>>>>>>>> struct sk_buff_head frags; >>>>>>>>>>> struct rb_node schedule_order; >>>>>>>>>>> + struct list_head candidate; >>>>>>>>>>> unsigned long flags; >>>>>>>>>>> >>>>>>>>>>> /* keep last! */ >>>>>>>>>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>>>>>>>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>>>>>>>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>>>>>>>>> >>>>>>>>>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>>>>>>>>> + struct timer_list remove_timer; >>>>>>>>>>> u16 airtime_flags; >>>>>>>>>>> >>>>>>>>>>> const struct ieee80211_ops *ops; >>>>>>>>>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>>>>>>>>> index e9ffa8e..78fe24a 100644 >>>>>>>>>>> --- a/net/mac80211/main.c >>>>>>>>>>> +++ b/net/mac80211/main.c >>>>>>>>>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>>>>>>>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>>>>>>>>> >>>>>>>>>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>>>>>>>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>>>>>>>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>>>>>>>>> spin_lock_init(&local->active_txq_lock[i]); >>>>>>>>>>> } >>>>>>>>>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>>>>>>>>> >>>>>>>>>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); >>>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>>> + jiffies + >>>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>>> + >>>>>>>>>>> INIT_LIST_HEAD(&local->chanctx_list); >>>>>>>>>>> mutex_init(&local->chanctx_mtx); >>>>>>>>>>> >>>>>>>>>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>>>>>>>>> ieee80211_hw >>>>>>>>>>> *hw) >>>>>>>>>>> tasklet_kill(&local->tx_pending_tasklet); >>>>>>>>>>> tasklet_kill(&local->tasklet); >>>>>>>>>>> >>>>>>>>>>> + del_timer_sync(&local->remove_timer); >>>>>>>>>>> #ifdef CONFIG_INET >>>>>>>>>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>>>>>>>>> #endif >>>>>>>>>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>>>>>>>>> index d00baaa..42ca010 100644 >>>>>>>>>>> --- a/net/mac80211/tx.c >>>>>>>>>>> +++ b/net/mac80211/tx.c >>>>>>>>>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>>>>>>>>> ieee80211_sub_if_data *sdata, >>>>>>>>>>> codel_stats_init(&txqi->cstats); >>>>>>>>>>> __skb_queue_head_init(&txqi->frags); >>>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>>> + INIT_LIST_HEAD(&txqi->candidate); >>>>>>>>>>> >>>>>>>>>>> txqi->txq.vif = &sdata->vif; >>>>>>>>>>> >>>>>>>>>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>>>>>>>>> ieee80211_hw >>>>>>>>>>> *hw, >>>>>>>>>>> >>>>>>>>>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>> >>>>>>>>>>> + if (!list_empty(&txqi->candidate)) >>>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>>> + >>>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>>>>>>>>> goto out; >>>>>>>>>>> >>>>>>>>>>> @@ -3783,6 +3787,20 @@ static void >>>>>>>>>>> __ieee80211_unschedule_txq(struct >>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>>>>>>>>> + struct ieee80211_txq *txq) >>>>>>>>>>> +{ >>>>>>>>>>> + struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>>> + struct txq_info *txqi = to_txq_info(txq); >>>>>>>>>>> + >>>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>>> + >>>>>>>>>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>>>>>>>>> + __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>>> + } >>>>>>>>>>> +} >>>>>>>>>>> + >>>>>>>>>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>>>>>>>>> struct ieee80211_txq *txq) >>>>>>>>>>> __acquires(txq_lock) __releases(txq_lock) >>>>>>>>>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>> struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>>> >>>>>>>>>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>> + ieee80211_remove_txq(hw, txq); >>>>>>>>>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>>>>>>>>> ieee80211_hw >>>>>>>>>>> *hw, >>>>>>>>>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>>> >>>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>>>>>>>>> - (skb_queue_empty(&txqi->frags) && >>>>>>>>>>> !txqi->tin.backlog_packets)) >>>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>> + !txq_has_queue(&txqi->txq) && >>>>>>>>>>> + list_empty(&txqi->candidate)) >>>>>>>>>>> + list_add_tail(&txqi->candidate, >>>>>>>>>>> &local->remove_list[txq->ac]); >>>>>>>>>>> + >>>>>>>>>>> } >>>>>>>>>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>>>>>>>>> >>>>>>>>>>> +void __ieee80211_check_txqs(struct ieee80211_local *local, >>>>>>>>>>> int >>>>>>>>>>> ac) >>>>>>>>>>> +{ >>>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>>> + struct sta_info *sta; >>>>>>>>>>> + >>>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>>>>>>>>> + >>>>>>>>>>> + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], >>>>>>>>>>> + candidate) { >>>>>>>>>>> + sta = container_of(iter->txq.sta, struct sta_info, sta); >>>>>>>>>>> + >>>>>>>>>>> + if (txq_has_queue(&iter->txq)) >>>>>>>>>>> + list_del_init(&iter->candidate); >>>>>>>>>>> + else >>>>>>>>>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>>>>>>>>> + } >>>>>>>>>>> +} >>>>>>>>>>> + >>>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *t) >>>>>>>>>>> +{ >>>>>>>>>>> + struct ieee80211_local *local = from_timer(local, t, >>>>>>>>>>> remove_timer); >>>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>>> + struct sta_info *sta; >>>>>>>>>>> + int ac; >>>>>>>>>>> + >>>>>>>>>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>>>>>>>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>> + __ieee80211_check_txqs(local, ac); >>>>>>>>>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>> + } >>>>>>>>>>> + >>>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>>> + jiffies + >>>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>>> +} >>>>>>>>>> >>>>>>>>>> I'll ask the same as I did last time (where you told me to hold >>>>>>>>>> off >>>>>>>>>> until this round): >>>>>>>>>> >>>>>>>>>> Why do you need the timer and the periodic check? If TXQs are >>>>>>>>>> added >>>>>>>>>> to >>>>>>>>>> the remove list during the scheduling run, and >>>>>>>>>> __ieee80211_check_txqs() >>>>>>>>>> is run from schedule_end(), isn't that sufficient to clear the >>>>>>>>>> list? >>>>>>>>> Is it possible that a txq is not added to the remove list but >>>>>>>>> then >>>>>>>>> packets in it are dropped by fq_codel algo? Like the station >>>>>>>>> disconnects >>>>>>>>> without any notification. >>>>>>>> >>>>>>>> Well as long as all the other cleanup paths call directly into >>>>>>>> __unschedule_txq(), that should remove stations from the >>>>>>>> scheduler >>>>>>>> when >>>>>>>> they disconnect etc. >>>>>>> Yes, the disconnect scenario is a bad example. My concern is, say, >>>>>>> we >>>>>>> have 10 stations and only one of them is assigned a very small >>>>>>> weight >>>>>>> compared with that of others. Suppose, after its chance of Tx, it >>>>>>> is >>>>>>> most likely to be placed in the rightmost(still has some packets >>>>>>> in >>>>>>> the >>>>>>> txq) and no more incoming data for it. The remaining packets in >>>>>>> txq >>>>>>> will >>>>>>> be dropped due to timeout algo in codel(correct me if I am wrong) >>>>>>> but >>>>>>> this empty txq will stay on the rbtree until other txqs get >>>>>>> drained >>>>>>> or >>>>>>> global vt catch up with its vt. The staying time could be long if >>>>>>> weight >>>>>>> is extremely small. Then do we need timer to check or any other >>>>>>> better >>>>>>> solution? >>>>>> >>>>>> Ah, I see what you mean. No, I don't think this will be a problem; >>>>>> the >>>>>> scenario you're describing would play out like this: >>>>>> >>>>>> 1. Station ends transmitting, still has a single packet queued, >>>>>> gets >>>>>> moved to the end of the rbtree (and stays there for a while). >>>>>> >>>>>> 2. When we finally get to the point where this station gets another >>>>>> chance to transmit, the CoDel drop timer triggers and the last >>>>>> packet >>>>>> is dropped[0]. This means that the queue will just be empty >>>>>> (and ieee80211_tx_dequeue() will return NULL). >>>>>> >>>>>> 3. Because the queue is empty, ieee80211_return_txq() will not put >>>>>> it >>>>>> back on the rbtree. >>>>>> >>>>>> Crucially, in 2. the CoDel algorithm doesn't kick in until the >>>>>> point >>>>>> of >>>>>> packet dequeue. But even if an empty queue stays on the rbtree for >>>>>> a >>>>>> while, there is no harm in that: eventually it will get its turn, >>>>>> it >>>>>> will turn out to be empty, and just be skipped over. >>>>> Then that will be fine. Thanks for the explanation of the dropping >>>>> part >>>>> in CoDel algorithm. >>>> >>>> Yup, think so. And you're welcome :) >>>> >>>>>> The issue we need to be concerned about is the opposite: If we have >>>>>> a >>>>>> queue that *does* have packets queued, but which is *not* scheduled >>>>>> for >>>>>> transmission, that will stall TX. >>>>> Is it by design since its vt is more than global vt, right? The >>>>> lattency >>>>> may somehow get impacted though. >>>> >>>> Well, it should still stay on the rbtree as long as it has packets >>>> queued. We don't have a check anywhere that reschedules TXQs whose >>>> v_t >>>> drops below global v_t... >>>> >>>>>> [0] CoDel in most cases only drops a single packet at a time, so it >>>>>> will >>>>>> not clear out an entire queue with multiple packets in one go. But >>>>>> you >>>>>> are right that it could conceivably drop the last packet in a >>>>>> queue. >>>>>> >>>>>>>> We only need to defer removal inside a single "scheduling round" >>>>>>>> (i.e., >>>>>>>> between a pair of ieee80211_txq_schedule_start/end. So if we just >>>>>>>> walk >>>>>>>> the remove list in schedule_end() we should be enough, no? >>>>>>>> >>>>>>>> Hmm, or maybe a simpler way to fix the original issue is just to >>>>>>>> have >>>>>>>> unschedule_txq() update the schedule_pos() pointer? >>>>>>>> >>>>>>>> I.e., unschedule_txq checks if the txq being removed is currently >>>>>>>> being >>>>>>>> pointed to by schedule_pos[ac], and if it is, it updates >>>>>>>> schedule_pos >>>>>>>> to >>>>>>>> be the rb_next of the current value? >>>>>>> Actually, if schedule_pos is updated to rb_next of the current >>>>>>> value, >>>>>>> then in the next_txq() where we are going to use rb_next again and >>>>>>> finally pick the next node of the node we really want. Is it fine >>>>>>> to >>>>>>> update schedule_pos to NULL? >>>>>> >>>>>> Hmm, yeah, good point. >>>>>> >>>>>> If we do end up setting schedule_pos to NULL in the middle of a >>>>>> scheduling round, that will make next_txq() "start over", and do >>>>>> another >>>>>> loop through the whole thing. I guess we may be able hit a case >>>>>> where >>>>>> things can oscillate back and forth between addition and removal >>>>>> resulting in an infinite loop? Not sure, but at least I can't seem >>>>>> to >>>>>> convince myself that this can't happen. >>>>> >>>>> As the loop of next_txq under lock protection as below, >>>>> >>>>> txq_schedule_start(); >>>>> while(txq=next_txq()){ >>>>> ... >>>>> return_txq(txq); >>>>> } >>>>> txq_schedule_end(); >>>>> >>>>> I do not see any chance of addition, no? >>>> >>>> As you noted in your other email, Felix reduced the locking. And >>>> yeah, >>>> we need to rebase this series to also incorporate that. I figure I >>>> can >>>> send an updated version of the first patch in the series once we've >>>> worked out the remaining issues with your follow-up patches. >>>> >>> Oh, I was thinking we were discussing without locking reduced. Yes, I >>> also agree there might be a case causing infinite loop. With locking >>> reduced, the tree can be adjusted between next_txq() and return_txq() >>> in >>> the loop situation. For further discussion, let 's consider, >>> 1) the tree starts like: >>> A->B->C->D->E >>> 2) then next_txq() returns A for dequeuing >>> 3) driver dequeues A and draines A without any active txq locked >>> meaning >>> the tree could be changed upon Tx compeletion. >>> 4) then in return_txq(), the tree could be, >>> i A->B->C->D->E （A is empty, and maybe soon be added back >>> before the loop end） >>> ii B->C->A->D->E （A is empty, and maybe soon be added back >>> before the loop end） >>> iii B->C->D->E->A （A is empty, and maybe soon be added back >>> before the loop end) >>> >>> with this change: >>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>> >>> for case i, local->schedule_pos[ac] is rb_next(A) which is B, and in >>> next_txq(), rb_next(B) is what we returns which actually is C and B is >>> skipped, no? >>> >>> Similiar for case ii, we skip B, C, D. >> >> Yup, I think you're right. But if we can fix this by making >> ieee80211_resort_txq() aware of the schedule_pos as well, no? I.e., if >> resort_txq() acts on the txq that's currently in schedule_pos, it will >> update schedule pos with the same rb_next(node) ?: rb_prev(node); >> (optionally after checking that the position of the node is actually >> going to change). > Sorry, please igore last email sent by mistake. > > I don't think it makes any difference with that in unschedule_txq(). For > case i, it finally picks C as well in next_txq(). For next_txq(), > schedule_pos means previous candidate node whereas with your change, it > looks like schedule_pos is current candidate node instead. Hmm, that was not actually what I was thinking, but yeah I think you're right that it would be easier to just change it so schedule_pos is pointing to the next and not the current txq we want to schedule. We'd still need a check in resort_txq() then, but it would make it safe to unschedule in return_txq()... >>> Also I am wondering if there will be some SMP issues relating with >>> local->schedule_pos[ac]. >> >> Not sure what you mean by this? > My bad. Please ignore this. > > >> >>>>> In ath10k, we will usually push packets of first txq as many as we >>>>> can >>>>> until it is drained and then move to the next one. So if a txq gets >>>>> removed in the return_txq, it should always be the leftmost. And >>>>> during this period, neither vt of any station or global vt can be >>>>> updated due to lock protection. >>>>> >>>>>> >>>>>> But in that case, we could fix it by just conditionally assigning >>>>>> either >>>>>> rb_next or rb_prev to the schedule_pos in unschedule_txq()? I.e., >>>>>> something like: >>>>>> >>>>>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>>>> I am not sure I am getting your point. Still in next_txq, >>>>> schedule_pos[ac] will lead us to the next node of the one we want. >>>> >>>> The logic in next_txq is different when schedule_pos[ac] is NULL, vs >>>> when rb_next(schedule_pos[ac]) is NULL. The former restarts a new >>>> scheduling round, while the latter ends the current round. >>>> >>>> -Toke >>> >>> -- >>> Yibo > > -- > Yibo
On 2019-09-21 21:02, Toke Høiland-Jørgensen wrote: > Yibo Zhao <yiboz@codeaurora.org> writes: > >> On 2019-09-21 19:27, Toke Høiland-Jørgensen wrote: >>> Yibo Zhao <yiboz@codeaurora.org> writes: >>> >>>> On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: >>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>> >>>>>> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>> >>>>>>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>> >>>>>>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>> >>>>>>>>>>>> In a loop txqs dequeue scenario, if the first txq in the >>>>>>>>>>>> rbtree >>>>>>>>>>>> gets >>>>>>>>>>>> removed from rbtree immediately in the >>>>>>>>>>>> ieee80211_return_txq(), >>>>>>>>>>>> the >>>>>>>>>>>> loop will break soon in the ieee80211_next_txq() due to >>>>>>>>>>>> schedule_pos >>>>>>>>>>>> not leading to the second txq in the rbtree. Thus, defering >>>>>>>>>>>> the >>>>>>>>>>>> removal right before the end of this schedule round. >>>>>>>>>>>> >>>>>>>>>>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>>>>>>>>>> >>>>>>>>>>> I didn't write this patch, so please don't use my sign-off. >>>>>>>>>>> I'll >>>>>>>>>>> add >>>>>>>>>>> ack or review tags as appropriate in reply; but a few >>>>>>>>>>> comments >>>>>>>>>>> first: >>>>>>>>>>> >>>>>>>>>>>> --- >>>>>>>>>>>> include/net/mac80211.h | 16 ++++++++++-- >>>>>>>>>>>> net/mac80211/ieee80211_i.h | 3 +++ >>>>>>>>>>>> net/mac80211/main.c | 6 +++++ >>>>>>>>>>>> net/mac80211/tx.c | 63 >>>>>>>>>>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>>>>>>>>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>>>>>>>>>> >>>>>>>>>>>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>>>>>>>>>>> index ac2ed8e..ba5a345 100644 >>>>>>>>>>>> --- a/include/net/mac80211.h >>>>>>>>>>>> +++ b/include/net/mac80211.h >>>>>>>>>>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>>>>>>>>>> >>>>>>>>>>>> #define IEEE80211_MAX_TX_RETRY 31 >>>>>>>>>>>> >>>>>>>>>>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>>>>>>>>>> + >>>>>>>>>>>> static inline void ieee80211_rate_set_vht(struct >>>>>>>>>>>> ieee80211_tx_rate >>>>>>>>>>>> *rate, >>>>>>>>>>>> u8 mcs, u8 nss) >>>>>>>>>>>> { >>>>>>>>>>>> @@ -6232,7 +6234,8 @@ struct sk_buff >>>>>>>>>>>> *ieee80211_tx_dequeue(struct >>>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>>> * @ac: AC number to return packets from. >>>>>>>>>>>> * >>>>>>>>>>>> * Should only be called between calls to >>>>>>>>>>>> ieee80211_txq_schedule_start() >>>>>>>>>>>> - * and ieee80211_txq_schedule_end(). >>>>>>>>>>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, >>>>>>>>>>>> it >>>>>>>>>>>> will >>>>>>>>>>>> be >>>>>>>>>>>> added >>>>>>>>>>>> + * to a remove list and get removed later. >>>>>>>>>>>> * Returns the next txq if successful, %NULL if no queue is >>>>>>>>>>>> eligible. >>>>>>>>>>>> If a txq >>>>>>>>>>>> * is returned, it should be returned with >>>>>>>>>>>> ieee80211_return_txq() >>>>>>>>>>>> after the >>>>>>>>>>>> * driver has finished scheduling it. >>>>>>>>>>>> @@ -6268,7 +6271,8 @@ void >>>>>>>>>>>> ieee80211_txq_schedule_start(struct >>>>>>>>>>>> ieee80211_hw *hw, u8 ac) >>>>>>>>>>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>>>>>>>>>> * @ac: AC number to acquire locks for >>>>>>>>>>>> * >>>>>>>>>>>> - * Release locks previously acquired by >>>>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>>>> + * Release locks previously acquired by >>>>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>>>> Check >>>>>>>>>>>> + * and remove the empty txq from rb-tree. >>>>>>>>>>>> */ >>>>>>>>>>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 >>>>>>>>>>>> ac) >>>>>>>>>>>> __releases(txq_lock); >>>>>>>>>>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>> *hw, struct ieee80211_txq *txq) >>>>>>>>>>>> __acquires(txq_lock) __releases(txq_lock); >>>>>>>>>>>> >>>>>>>>>>>> /** >>>>>>>>>>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>>>>>>>>>> + * >>>>>>>>>>>> + * @tmr: pointer as obtained from local >>>>>>>>>>>> + * >>>>>>>>>>>> + */ >>>>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>>>>>>>>>> + >>>>>>>>>>>> +/** >>>>>>>>>>>> * ieee80211_txq_may_transmit - check whether TXQ is >>>>>>>>>>>> allowed >>>>>>>>>>>> to >>>>>>>>>>>> transmit >>>>>>>>>>>> * >>>>>>>>>>>> * This function is used to check whether given txq is >>>>>>>>>>>> allowed >>>>>>>>>>>> to >>>>>>>>>>>> transmit by >>>>>>>>>>>> diff --git a/net/mac80211/ieee80211_i.h >>>>>>>>>>>> b/net/mac80211/ieee80211_i.h >>>>>>>>>>>> index a4556f9..49aa143e 100644 >>>>>>>>>>>> --- a/net/mac80211/ieee80211_i.h >>>>>>>>>>>> +++ b/net/mac80211/ieee80211_i.h >>>>>>>>>>>> @@ -847,6 +847,7 @@ struct txq_info { >>>>>>>>>>>> struct codel_stats cstats; >>>>>>>>>>>> struct sk_buff_head frags; >>>>>>>>>>>> struct rb_node schedule_order; >>>>>>>>>>>> + struct list_head candidate; >>>>>>>>>>>> unsigned long flags; >>>>>>>>>>>> >>>>>>>>>>>> /* keep last! */ >>>>>>>>>>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>>>>>>>>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>>>>>>>>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>>>>>>>>>> >>>>>>>>>>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>>>>>>>>>> + struct timer_list remove_timer; >>>>>>>>>>>> u16 airtime_flags; >>>>>>>>>>>> >>>>>>>>>>>> const struct ieee80211_ops *ops; >>>>>>>>>>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>>>>>>>>>> index e9ffa8e..78fe24a 100644 >>>>>>>>>>>> --- a/net/mac80211/main.c >>>>>>>>>>>> +++ b/net/mac80211/main.c >>>>>>>>>>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>>>>>>>>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>>>>>>>>>> >>>>>>>>>>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>>>>>>>>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>>>>>>>>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>>>>>>>>>> spin_lock_init(&local->active_txq_lock[i]); >>>>>>>>>>>> } >>>>>>>>>>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>>>>>>>>>> >>>>>>>>>>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, >>>>>>>>>>>> 0); >>>>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>>>> + jiffies + >>>>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>>>> + >>>>>>>>>>>> INIT_LIST_HEAD(&local->chanctx_list); >>>>>>>>>>>> mutex_init(&local->chanctx_mtx); >>>>>>>>>>>> >>>>>>>>>>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>> *hw) >>>>>>>>>>>> tasklet_kill(&local->tx_pending_tasklet); >>>>>>>>>>>> tasklet_kill(&local->tasklet); >>>>>>>>>>>> >>>>>>>>>>>> + del_timer_sync(&local->remove_timer); >>>>>>>>>>>> #ifdef CONFIG_INET >>>>>>>>>>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>>>>>>>>>> #endif >>>>>>>>>>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>>>>>>>>>> index d00baaa..42ca010 100644 >>>>>>>>>>>> --- a/net/mac80211/tx.c >>>>>>>>>>>> +++ b/net/mac80211/tx.c >>>>>>>>>>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>>>>>>>>>> ieee80211_sub_if_data *sdata, >>>>>>>>>>>> codel_stats_init(&txqi->cstats); >>>>>>>>>>>> __skb_queue_head_init(&txqi->frags); >>>>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>>>> + INIT_LIST_HEAD(&txqi->candidate); >>>>>>>>>>>> >>>>>>>>>>>> txqi->txq.vif = &sdata->vif; >>>>>>>>>>>> >>>>>>>>>>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>> *hw, >>>>>>>>>>>> >>>>>>>>>>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>>> >>>>>>>>>>>> + if (!list_empty(&txqi->candidate)) >>>>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>>>> + >>>>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>>>>>>>>>> goto out; >>>>>>>>>>>> >>>>>>>>>>>> @@ -3783,6 +3787,20 @@ static void >>>>>>>>>>>> __ieee80211_unschedule_txq(struct >>>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>>>> } >>>>>>>>>>>> >>>>>>>>>>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>>>>>>>>>> + struct ieee80211_txq *txq) >>>>>>>>>>>> +{ >>>>>>>>>>>> + struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>>>> + struct txq_info *txqi = to_txq_info(txq); >>>>>>>>>>>> + >>>>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>> + >>>>>>>>>>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>>>>>>>>>> + __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>>>> + } >>>>>>>>>>>> +} >>>>>>>>>>>> + >>>>>>>>>>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>>>>>>>>>> struct ieee80211_txq *txq) >>>>>>>>>>>> __acquires(txq_lock) __releases(txq_lock) >>>>>>>>>>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>>> struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>>>> >>>>>>>>>>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>>> + ieee80211_remove_txq(hw, txq); >>>>>>>>>>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>> } >>>>>>>>>>>> >>>>>>>>>>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>> *hw, >>>>>>>>>>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>> >>>>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>>>>>>>>>> - (skb_queue_empty(&txqi->frags) && >>>>>>>>>>>> !txqi->tin.backlog_packets)) >>>>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>>> + !txq_has_queue(&txqi->txq) && >>>>>>>>>>>> + list_empty(&txqi->candidate)) >>>>>>>>>>>> + list_add_tail(&txqi->candidate, >>>>>>>>>>>> &local->remove_list[txq->ac]); >>>>>>>>>>>> + >>>>>>>>>>>> } >>>>>>>>>>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>>>>>>>>>> >>>>>>>>>>>> +void __ieee80211_check_txqs(struct ieee80211_local *local, >>>>>>>>>>>> int >>>>>>>>>>>> ac) >>>>>>>>>>>> +{ >>>>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>>>> + struct sta_info *sta; >>>>>>>>>>>> + >>>>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>>>>>>>>>> + >>>>>>>>>>>> + list_for_each_entry_safe(iter, tmp, >>>>>>>>>>>> &local->remove_list[ac], >>>>>>>>>>>> + candidate) { >>>>>>>>>>>> + sta = container_of(iter->txq.sta, struct sta_info, sta); >>>>>>>>>>>> + >>>>>>>>>>>> + if (txq_has_queue(&iter->txq)) >>>>>>>>>>>> + list_del_init(&iter->candidate); >>>>>>>>>>>> + else >>>>>>>>>>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>>>>>>>>>> + } >>>>>>>>>>>> +} >>>>>>>>>>>> + >>>>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *t) >>>>>>>>>>>> +{ >>>>>>>>>>>> + struct ieee80211_local *local = from_timer(local, t, >>>>>>>>>>>> remove_timer); >>>>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>>>> + struct sta_info *sta; >>>>>>>>>>>> + int ac; >>>>>>>>>>>> + >>>>>>>>>>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>>>>>>>>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>>> + __ieee80211_check_txqs(local, ac); >>>>>>>>>>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>>> + } >>>>>>>>>>>> + >>>>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>>>> + jiffies + >>>>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>>>> +} >>>>>>>>>>> >>>>>>>>>>> I'll ask the same as I did last time (where you told me to >>>>>>>>>>> hold >>>>>>>>>>> off >>>>>>>>>>> until this round): >>>>>>>>>>> >>>>>>>>>>> Why do you need the timer and the periodic check? If TXQs are >>>>>>>>>>> added >>>>>>>>>>> to >>>>>>>>>>> the remove list during the scheduling run, and >>>>>>>>>>> __ieee80211_check_txqs() >>>>>>>>>>> is run from schedule_end(), isn't that sufficient to clear >>>>>>>>>>> the >>>>>>>>>>> list? >>>>>>>>>> Is it possible that a txq is not added to the remove list but >>>>>>>>>> then >>>>>>>>>> packets in it are dropped by fq_codel algo? Like the station >>>>>>>>>> disconnects >>>>>>>>>> without any notification. >>>>>>>>> >>>>>>>>> Well as long as all the other cleanup paths call directly into >>>>>>>>> __unschedule_txq(), that should remove stations from the >>>>>>>>> scheduler >>>>>>>>> when >>>>>>>>> they disconnect etc. >>>>>>>> Yes, the disconnect scenario is a bad example. My concern is, >>>>>>>> say, >>>>>>>> we >>>>>>>> have 10 stations and only one of them is assigned a very small >>>>>>>> weight >>>>>>>> compared with that of others. Suppose, after its chance of Tx, >>>>>>>> it >>>>>>>> is >>>>>>>> most likely to be placed in the rightmost(still has some packets >>>>>>>> in >>>>>>>> the >>>>>>>> txq) and no more incoming data for it. The remaining packets in >>>>>>>> txq >>>>>>>> will >>>>>>>> be dropped due to timeout algo in codel(correct me if I am >>>>>>>> wrong) >>>>>>>> but >>>>>>>> this empty txq will stay on the rbtree until other txqs get >>>>>>>> drained >>>>>>>> or >>>>>>>> global vt catch up with its vt. The staying time could be long >>>>>>>> if >>>>>>>> weight >>>>>>>> is extremely small. Then do we need timer to check or any other >>>>>>>> better >>>>>>>> solution? >>>>>>> >>>>>>> Ah, I see what you mean. No, I don't think this will be a >>>>>>> problem; >>>>>>> the >>>>>>> scenario you're describing would play out like this: >>>>>>> >>>>>>> 1. Station ends transmitting, still has a single packet queued, >>>>>>> gets >>>>>>> moved to the end of the rbtree (and stays there for a while). >>>>>>> >>>>>>> 2. When we finally get to the point where this station gets >>>>>>> another >>>>>>> chance to transmit, the CoDel drop timer triggers and the last >>>>>>> packet >>>>>>> is dropped[0]. This means that the queue will just be empty >>>>>>> (and ieee80211_tx_dequeue() will return NULL). >>>>>>> >>>>>>> 3. Because the queue is empty, ieee80211_return_txq() will not >>>>>>> put >>>>>>> it >>>>>>> back on the rbtree. >>>>>>> >>>>>>> Crucially, in 2. the CoDel algorithm doesn't kick in until the >>>>>>> point >>>>>>> of >>>>>>> packet dequeue. But even if an empty queue stays on the rbtree >>>>>>> for >>>>>>> a >>>>>>> while, there is no harm in that: eventually it will get its turn, >>>>>>> it >>>>>>> will turn out to be empty, and just be skipped over. >>>>>> Then that will be fine. Thanks for the explanation of the dropping >>>>>> part >>>>>> in CoDel algorithm. >>>>> >>>>> Yup, think so. And you're welcome :) >>>>> >>>>>>> The issue we need to be concerned about is the opposite: If we >>>>>>> have >>>>>>> a >>>>>>> queue that *does* have packets queued, but which is *not* >>>>>>> scheduled >>>>>>> for >>>>>>> transmission, that will stall TX. >>>>>> Is it by design since its vt is more than global vt, right? The >>>>>> lattency >>>>>> may somehow get impacted though. >>>>> >>>>> Well, it should still stay on the rbtree as long as it has packets >>>>> queued. We don't have a check anywhere that reschedules TXQs whose >>>>> v_t >>>>> drops below global v_t... >>>>> >>>>>>> [0] CoDel in most cases only drops a single packet at a time, so >>>>>>> it >>>>>>> will >>>>>>> not clear out an entire queue with multiple packets in one go. >>>>>>> But >>>>>>> you >>>>>>> are right that it could conceivably drop the last packet in a >>>>>>> queue. >>>>>>> >>>>>>>>> We only need to defer removal inside a single "scheduling >>>>>>>>> round" >>>>>>>>> (i.e., >>>>>>>>> between a pair of ieee80211_txq_schedule_start/end. So if we >>>>>>>>> just >>>>>>>>> walk >>>>>>>>> the remove list in schedule_end() we should be enough, no? >>>>>>>>> >>>>>>>>> Hmm, or maybe a simpler way to fix the original issue is just >>>>>>>>> to >>>>>>>>> have >>>>>>>>> unschedule_txq() update the schedule_pos() pointer? >>>>>>>>> >>>>>>>>> I.e., unschedule_txq checks if the txq being removed is >>>>>>>>> currently >>>>>>>>> being >>>>>>>>> pointed to by schedule_pos[ac], and if it is, it updates >>>>>>>>> schedule_pos >>>>>>>>> to >>>>>>>>> be the rb_next of the current value? >>>>>>>> Actually, if schedule_pos is updated to rb_next of the current >>>>>>>> value, >>>>>>>> then in the next_txq() where we are going to use rb_next again >>>>>>>> and >>>>>>>> finally pick the next node of the node we really want. Is it >>>>>>>> fine >>>>>>>> to >>>>>>>> update schedule_pos to NULL? >>>>>>> >>>>>>> Hmm, yeah, good point. >>>>>>> >>>>>>> If we do end up setting schedule_pos to NULL in the middle of a >>>>>>> scheduling round, that will make next_txq() "start over", and do >>>>>>> another >>>>>>> loop through the whole thing. I guess we may be able hit a case >>>>>>> where >>>>>>> things can oscillate back and forth between addition and removal >>>>>>> resulting in an infinite loop? Not sure, but at least I can't >>>>>>> seem >>>>>>> to >>>>>>> convince myself that this can't happen. >>>>>> >>>>>> As the loop of next_txq under lock protection as below, >>>>>> >>>>>> txq_schedule_start(); >>>>>> while(txq=next_txq()){ >>>>>> ... >>>>>> return_txq(txq); >>>>>> } >>>>>> txq_schedule_end(); >>>>>> >>>>>> I do not see any chance of addition, no? >>>>> >>>>> As you noted in your other email, Felix reduced the locking. And >>>>> yeah, >>>>> we need to rebase this series to also incorporate that. I figure I >>>>> can >>>>> send an updated version of the first patch in the series once we've >>>>> worked out the remaining issues with your follow-up patches. >>>>> >>>> Oh, I was thinking we were discussing without locking reduced. Yes, >>>> I >>>> also agree there might be a case causing infinite loop. With locking >>>> reduced, the tree can be adjusted between next_txq() and >>>> return_txq() >>>> in >>>> the loop situation. For further discussion, let 's consider, >>>> 1) the tree starts like: >>>> A->B->C->D->E >>>> 2) then next_txq() returns A for dequeuing >>>> 3) driver dequeues A and draines A without any active txq locked >>>> meaning >>>> the tree could be changed upon Tx compeletion. >>>> 4) then in return_txq(), the tree could be, >>>> i A->B->C->D->E （A is empty, and maybe soon be added back >>>> before the loop end） >>>> ii B->C->A->D->E （A is empty, and maybe soon be added back >>>> before the loop end） >>>> iii B->C->D->E->A （A is empty, and maybe soon be added back >>>> before the loop end) >>>> >>>> with this change: >>>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>>> >>>> for case i, local->schedule_pos[ac] is rb_next(A) which is B, and in >>>> next_txq(), rb_next(B) is what we returns which actually is C and B >>>> is >>>> skipped, no? >>>> >>>> Similiar for case ii, we skip B, C, D. >>> >>> Yup, I think you're right. But if we can fix this by making >>> ieee80211_resort_txq() aware of the schedule_pos as well, no? I.e., >>> if >>> resort_txq() acts on the txq that's currently in schedule_pos, it >>> will >>> update schedule pos with the same rb_next(node) ?: rb_prev(node); >>> (optionally after checking that the position of the node is actually >>> going to change). >> Sorry, please igore last email sent by mistake. >> >> I don't think it makes any difference with that in unschedule_txq(). >> For >> case i, it finally picks C as well in next_txq(). For next_txq(), >> schedule_pos means previous candidate node whereas with your change, >> it >> looks like schedule_pos is current candidate node instead. > > Hmm, that was not actually what I was thinking, but yeah I think you're > right that it would be easier to just change it so schedule_pos is > pointing to the next and not the current txq we want to schedule. So do you mean we can change next_txq like this, struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 ac) { struct ieee80211_local *local = hw_to_local(hw); struct rb_node *node = local->schedule_pos[ac]; struct txq_info *txqi = NULL; bool first = false; lockdep_assert_held(&local->active_txq_lock[ac]); if (!node) { node = rb_first_cached(&local->active_txqs[ac]); first = true; - } else - node = rb_next(node); + } + if (!node) return NULL; > > We'd still need a check in resort_txq() then, but it would make it safe > to unschedule in return_txq()... Yes, agree with that. > >>>> Also I am wondering if there will be some SMP issues relating with >>>> local->schedule_pos[ac]. >>> >>> Not sure what you mean by this? >> My bad. Please ignore this. >> >> >>> >>>>>> In ath10k, we will usually push packets of first txq as many as we >>>>>> can >>>>>> until it is drained and then move to the next one. So if a txq >>>>>> gets >>>>>> removed in the return_txq, it should always be the leftmost. And >>>>>> during this period, neither vt of any station or global vt can be >>>>>> updated due to lock protection. >>>>>> >>>>>>> >>>>>>> But in that case, we could fix it by just conditionally assigning >>>>>>> either >>>>>>> rb_next or rb_prev to the schedule_pos in unschedule_txq()? I.e., >>>>>>> something like: >>>>>>> >>>>>>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>>>>> I am not sure I am getting your point. Still in next_txq, >>>>>> schedule_pos[ac] will lead us to the next node of the one we want. >>>>> >>>>> The logic in next_txq is different when schedule_pos[ac] is NULL, >>>>> vs >>>>> when rb_next(schedule_pos[ac]) is NULL. The former restarts a new >>>>> scheduling round, while the latter ends the current round. >>>>> >>>>> -Toke >>>> >>>> -- >>>> Yibo >> >> -- >> Yibo
Yibo Zhao <yiboz@codeaurora.org> writes: > On 2019-09-21 21:02, Toke Høiland-Jørgensen wrote: >> Yibo Zhao <yiboz@codeaurora.org> writes: >> >>> On 2019-09-21 19:27, Toke Høiland-Jørgensen wrote: >>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>> >>>>> On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: >>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>> >>>>>>> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>> >>>>>>>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>> >>>>>>>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>>> >>>>>>>>>>>>> In a loop txqs dequeue scenario, if the first txq in the >>>>>>>>>>>>> rbtree >>>>>>>>>>>>> gets >>>>>>>>>>>>> removed from rbtree immediately in the >>>>>>>>>>>>> ieee80211_return_txq(), >>>>>>>>>>>>> the >>>>>>>>>>>>> loop will break soon in the ieee80211_next_txq() due to >>>>>>>>>>>>> schedule_pos >>>>>>>>>>>>> not leading to the second txq in the rbtree. Thus, defering >>>>>>>>>>>>> the >>>>>>>>>>>>> removal right before the end of this schedule round. >>>>>>>>>>>>> >>>>>>>>>>>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>>>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>>>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>>>>>>>>>>> >>>>>>>>>>>> I didn't write this patch, so please don't use my sign-off. >>>>>>>>>>>> I'll >>>>>>>>>>>> add >>>>>>>>>>>> ack or review tags as appropriate in reply; but a few >>>>>>>>>>>> comments >>>>>>>>>>>> first: >>>>>>>>>>>> >>>>>>>>>>>>> --- >>>>>>>>>>>>> include/net/mac80211.h | 16 ++++++++++-- >>>>>>>>>>>>> net/mac80211/ieee80211_i.h | 3 +++ >>>>>>>>>>>>> net/mac80211/main.c | 6 +++++ >>>>>>>>>>>>> net/mac80211/tx.c | 63 >>>>>>>>>>>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>>>>>>>>>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>>>>>>>>>>> >>>>>>>>>>>>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>>>>>>>>>>>> index ac2ed8e..ba5a345 100644 >>>>>>>>>>>>> --- a/include/net/mac80211.h >>>>>>>>>>>>> +++ b/include/net/mac80211.h >>>>>>>>>>>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>>>>>>>>>>> >>>>>>>>>>>>> #define IEEE80211_MAX_TX_RETRY 31 >>>>>>>>>>>>> >>>>>>>>>>>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>>>>>>>>>>> + >>>>>>>>>>>>> static inline void ieee80211_rate_set_vht(struct >>>>>>>>>>>>> ieee80211_tx_rate >>>>>>>>>>>>> *rate, >>>>>>>>>>>>> u8 mcs, u8 nss) >>>>>>>>>>>>> { >>>>>>>>>>>>> @@ -6232,7 +6234,8 @@ struct sk_buff >>>>>>>>>>>>> *ieee80211_tx_dequeue(struct >>>>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>>>> * @ac: AC number to return packets from. >>>>>>>>>>>>> * >>>>>>>>>>>>> * Should only be called between calls to >>>>>>>>>>>>> ieee80211_txq_schedule_start() >>>>>>>>>>>>> - * and ieee80211_txq_schedule_end(). >>>>>>>>>>>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, >>>>>>>>>>>>> it >>>>>>>>>>>>> will >>>>>>>>>>>>> be >>>>>>>>>>>>> added >>>>>>>>>>>>> + * to a remove list and get removed later. >>>>>>>>>>>>> * Returns the next txq if successful, %NULL if no queue is >>>>>>>>>>>>> eligible. >>>>>>>>>>>>> If a txq >>>>>>>>>>>>> * is returned, it should be returned with >>>>>>>>>>>>> ieee80211_return_txq() >>>>>>>>>>>>> after the >>>>>>>>>>>>> * driver has finished scheduling it. >>>>>>>>>>>>> @@ -6268,7 +6271,8 @@ void >>>>>>>>>>>>> ieee80211_txq_schedule_start(struct >>>>>>>>>>>>> ieee80211_hw *hw, u8 ac) >>>>>>>>>>>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>>>>>>>>>>> * @ac: AC number to acquire locks for >>>>>>>>>>>>> * >>>>>>>>>>>>> - * Release locks previously acquired by >>>>>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>>>>> + * Release locks previously acquired by >>>>>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>>>>> Check >>>>>>>>>>>>> + * and remove the empty txq from rb-tree. >>>>>>>>>>>>> */ >>>>>>>>>>>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 >>>>>>>>>>>>> ac) >>>>>>>>>>>>> __releases(txq_lock); >>>>>>>>>>>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>>> *hw, struct ieee80211_txq *txq) >>>>>>>>>>>>> __acquires(txq_lock) __releases(txq_lock); >>>>>>>>>>>>> >>>>>>>>>>>>> /** >>>>>>>>>>>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>>>>>>>>>>> + * >>>>>>>>>>>>> + * @tmr: pointer as obtained from local >>>>>>>>>>>>> + * >>>>>>>>>>>>> + */ >>>>>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>>>>>>>>>>> + >>>>>>>>>>>>> +/** >>>>>>>>>>>>> * ieee80211_txq_may_transmit - check whether TXQ is >>>>>>>>>>>>> allowed >>>>>>>>>>>>> to >>>>>>>>>>>>> transmit >>>>>>>>>>>>> * >>>>>>>>>>>>> * This function is used to check whether given txq is >>>>>>>>>>>>> allowed >>>>>>>>>>>>> to >>>>>>>>>>>>> transmit by >>>>>>>>>>>>> diff --git a/net/mac80211/ieee80211_i.h >>>>>>>>>>>>> b/net/mac80211/ieee80211_i.h >>>>>>>>>>>>> index a4556f9..49aa143e 100644 >>>>>>>>>>>>> --- a/net/mac80211/ieee80211_i.h >>>>>>>>>>>>> +++ b/net/mac80211/ieee80211_i.h >>>>>>>>>>>>> @@ -847,6 +847,7 @@ struct txq_info { >>>>>>>>>>>>> struct codel_stats cstats; >>>>>>>>>>>>> struct sk_buff_head frags; >>>>>>>>>>>>> struct rb_node schedule_order; >>>>>>>>>>>>> + struct list_head candidate; >>>>>>>>>>>>> unsigned long flags; >>>>>>>>>>>>> >>>>>>>>>>>>> /* keep last! */ >>>>>>>>>>>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>>>>>>>>>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>>>>>>>>>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>>>>>>>>>>> >>>>>>>>>>>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>>>>>>>>>>> + struct timer_list remove_timer; >>>>>>>>>>>>> u16 airtime_flags; >>>>>>>>>>>>> >>>>>>>>>>>>> const struct ieee80211_ops *ops; >>>>>>>>>>>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>>>>>>>>>>> index e9ffa8e..78fe24a 100644 >>>>>>>>>>>>> --- a/net/mac80211/main.c >>>>>>>>>>>>> +++ b/net/mac80211/main.c >>>>>>>>>>>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>>>>>>>>>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>>>>>>>>>>> >>>>>>>>>>>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>>>>>>>>>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>>>>>>>>>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>>>>>>>>>>> spin_lock_init(&local->active_txq_lock[i]); >>>>>>>>>>>>> } >>>>>>>>>>>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>>>>>>>>>>> >>>>>>>>>>>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, >>>>>>>>>>>>> 0); >>>>>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>>>>> + jiffies + >>>>>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>>>>> + >>>>>>>>>>>>> INIT_LIST_HEAD(&local->chanctx_list); >>>>>>>>>>>>> mutex_init(&local->chanctx_mtx); >>>>>>>>>>>>> >>>>>>>>>>>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>>> *hw) >>>>>>>>>>>>> tasklet_kill(&local->tx_pending_tasklet); >>>>>>>>>>>>> tasklet_kill(&local->tasklet); >>>>>>>>>>>>> >>>>>>>>>>>>> + del_timer_sync(&local->remove_timer); >>>>>>>>>>>>> #ifdef CONFIG_INET >>>>>>>>>>>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>>>>>>>>>>> #endif >>>>>>>>>>>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>>>>>>>>>>> index d00baaa..42ca010 100644 >>>>>>>>>>>>> --- a/net/mac80211/tx.c >>>>>>>>>>>>> +++ b/net/mac80211/tx.c >>>>>>>>>>>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>>>>>>>>>>> ieee80211_sub_if_data *sdata, >>>>>>>>>>>>> codel_stats_init(&txqi->cstats); >>>>>>>>>>>>> __skb_queue_head_init(&txqi->frags); >>>>>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>>>>> + INIT_LIST_HEAD(&txqi->candidate); >>>>>>>>>>>>> >>>>>>>>>>>>> txqi->txq.vif = &sdata->vif; >>>>>>>>>>>>> >>>>>>>>>>>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>>> *hw, >>>>>>>>>>>>> >>>>>>>>>>>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>>>> >>>>>>>>>>>>> + if (!list_empty(&txqi->candidate)) >>>>>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>>>>> + >>>>>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>>>>>>>>>>> goto out; >>>>>>>>>>>>> >>>>>>>>>>>>> @@ -3783,6 +3787,20 @@ static void >>>>>>>>>>>>> __ieee80211_unschedule_txq(struct >>>>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>>>>> } >>>>>>>>>>>>> >>>>>>>>>>>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>>>>>>>>>>> + struct ieee80211_txq *txq) >>>>>>>>>>>>> +{ >>>>>>>>>>>>> + struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>>>>> + struct txq_info *txqi = to_txq_info(txq); >>>>>>>>>>>>> + >>>>>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>>> + >>>>>>>>>>>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>>>>>>>>>>> + __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>>>>> + } >>>>>>>>>>>>> +} >>>>>>>>>>>>> + >>>>>>>>>>>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>>>>>>>>>>> struct ieee80211_txq *txq) >>>>>>>>>>>>> __acquires(txq_lock) __releases(txq_lock) >>>>>>>>>>>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>>>> struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>>>>> >>>>>>>>>>>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>>>> + ieee80211_remove_txq(hw, txq); >>>>>>>>>>>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>>> } >>>>>>>>>>>>> >>>>>>>>>>>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>>> *hw, >>>>>>>>>>>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>>> >>>>>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>>>>>>>>>>> - (skb_queue_empty(&txqi->frags) && >>>>>>>>>>>>> !txqi->tin.backlog_packets)) >>>>>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>>>> + !txq_has_queue(&txqi->txq) && >>>>>>>>>>>>> + list_empty(&txqi->candidate)) >>>>>>>>>>>>> + list_add_tail(&txqi->candidate, >>>>>>>>>>>>> &local->remove_list[txq->ac]); >>>>>>>>>>>>> + >>>>>>>>>>>>> } >>>>>>>>>>>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>>>>>>>>>>> >>>>>>>>>>>>> +void __ieee80211_check_txqs(struct ieee80211_local *local, >>>>>>>>>>>>> int >>>>>>>>>>>>> ac) >>>>>>>>>>>>> +{ >>>>>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>>>>> + struct sta_info *sta; >>>>>>>>>>>>> + >>>>>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>>>>>>>>>>> + >>>>>>>>>>>>> + list_for_each_entry_safe(iter, tmp, >>>>>>>>>>>>> &local->remove_list[ac], >>>>>>>>>>>>> + candidate) { >>>>>>>>>>>>> + sta = container_of(iter->txq.sta, struct sta_info, sta); >>>>>>>>>>>>> + >>>>>>>>>>>>> + if (txq_has_queue(&iter->txq)) >>>>>>>>>>>>> + list_del_init(&iter->candidate); >>>>>>>>>>>>> + else >>>>>>>>>>>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>>>>>>>>>>> + } >>>>>>>>>>>>> +} >>>>>>>>>>>>> + >>>>>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *t) >>>>>>>>>>>>> +{ >>>>>>>>>>>>> + struct ieee80211_local *local = from_timer(local, t, >>>>>>>>>>>>> remove_timer); >>>>>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>>>>> + struct sta_info *sta; >>>>>>>>>>>>> + int ac; >>>>>>>>>>>>> + >>>>>>>>>>>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>>>>>>>>>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>>>> + __ieee80211_check_txqs(local, ac); >>>>>>>>>>>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>>>> + } >>>>>>>>>>>>> + >>>>>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>>>>> + jiffies + >>>>>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>>>>> +} >>>>>>>>>>>> >>>>>>>>>>>> I'll ask the same as I did last time (where you told me to >>>>>>>>>>>> hold >>>>>>>>>>>> off >>>>>>>>>>>> until this round): >>>>>>>>>>>> >>>>>>>>>>>> Why do you need the timer and the periodic check? If TXQs are >>>>>>>>>>>> added >>>>>>>>>>>> to >>>>>>>>>>>> the remove list during the scheduling run, and >>>>>>>>>>>> __ieee80211_check_txqs() >>>>>>>>>>>> is run from schedule_end(), isn't that sufficient to clear >>>>>>>>>>>> the >>>>>>>>>>>> list? >>>>>>>>>>> Is it possible that a txq is not added to the remove list but >>>>>>>>>>> then >>>>>>>>>>> packets in it are dropped by fq_codel algo? Like the station >>>>>>>>>>> disconnects >>>>>>>>>>> without any notification. >>>>>>>>>> >>>>>>>>>> Well as long as all the other cleanup paths call directly into >>>>>>>>>> __unschedule_txq(), that should remove stations from the >>>>>>>>>> scheduler >>>>>>>>>> when >>>>>>>>>> they disconnect etc. >>>>>>>>> Yes, the disconnect scenario is a bad example. My concern is, >>>>>>>>> say, >>>>>>>>> we >>>>>>>>> have 10 stations and only one of them is assigned a very small >>>>>>>>> weight >>>>>>>>> compared with that of others. Suppose, after its chance of Tx, >>>>>>>>> it >>>>>>>>> is >>>>>>>>> most likely to be placed in the rightmost(still has some packets >>>>>>>>> in >>>>>>>>> the >>>>>>>>> txq) and no more incoming data for it. The remaining packets in >>>>>>>>> txq >>>>>>>>> will >>>>>>>>> be dropped due to timeout algo in codel(correct me if I am >>>>>>>>> wrong) >>>>>>>>> but >>>>>>>>> this empty txq will stay on the rbtree until other txqs get >>>>>>>>> drained >>>>>>>>> or >>>>>>>>> global vt catch up with its vt. The staying time could be long >>>>>>>>> if >>>>>>>>> weight >>>>>>>>> is extremely small. Then do we need timer to check or any other >>>>>>>>> better >>>>>>>>> solution? >>>>>>>> >>>>>>>> Ah, I see what you mean. No, I don't think this will be a >>>>>>>> problem; >>>>>>>> the >>>>>>>> scenario you're describing would play out like this: >>>>>>>> >>>>>>>> 1. Station ends transmitting, still has a single packet queued, >>>>>>>> gets >>>>>>>> moved to the end of the rbtree (and stays there for a while). >>>>>>>> >>>>>>>> 2. When we finally get to the point where this station gets >>>>>>>> another >>>>>>>> chance to transmit, the CoDel drop timer triggers and the last >>>>>>>> packet >>>>>>>> is dropped[0]. This means that the queue will just be empty >>>>>>>> (and ieee80211_tx_dequeue() will return NULL). >>>>>>>> >>>>>>>> 3. Because the queue is empty, ieee80211_return_txq() will not >>>>>>>> put >>>>>>>> it >>>>>>>> back on the rbtree. >>>>>>>> >>>>>>>> Crucially, in 2. the CoDel algorithm doesn't kick in until the >>>>>>>> point >>>>>>>> of >>>>>>>> packet dequeue. But even if an empty queue stays on the rbtree >>>>>>>> for >>>>>>>> a >>>>>>>> while, there is no harm in that: eventually it will get its turn, >>>>>>>> it >>>>>>>> will turn out to be empty, and just be skipped over. >>>>>>> Then that will be fine. Thanks for the explanation of the dropping >>>>>>> part >>>>>>> in CoDel algorithm. >>>>>> >>>>>> Yup, think so. And you're welcome :) >>>>>> >>>>>>>> The issue we need to be concerned about is the opposite: If we >>>>>>>> have >>>>>>>> a >>>>>>>> queue that *does* have packets queued, but which is *not* >>>>>>>> scheduled >>>>>>>> for >>>>>>>> transmission, that will stall TX. >>>>>>> Is it by design since its vt is more than global vt, right? The >>>>>>> lattency >>>>>>> may somehow get impacted though. >>>>>> >>>>>> Well, it should still stay on the rbtree as long as it has packets >>>>>> queued. We don't have a check anywhere that reschedules TXQs whose >>>>>> v_t >>>>>> drops below global v_t... >>>>>> >>>>>>>> [0] CoDel in most cases only drops a single packet at a time, so >>>>>>>> it >>>>>>>> will >>>>>>>> not clear out an entire queue with multiple packets in one go. >>>>>>>> But >>>>>>>> you >>>>>>>> are right that it could conceivably drop the last packet in a >>>>>>>> queue. >>>>>>>> >>>>>>>>>> We only need to defer removal inside a single "scheduling >>>>>>>>>> round" >>>>>>>>>> (i.e., >>>>>>>>>> between a pair of ieee80211_txq_schedule_start/end. So if we >>>>>>>>>> just >>>>>>>>>> walk >>>>>>>>>> the remove list in schedule_end() we should be enough, no? >>>>>>>>>> >>>>>>>>>> Hmm, or maybe a simpler way to fix the original issue is just >>>>>>>>>> to >>>>>>>>>> have >>>>>>>>>> unschedule_txq() update the schedule_pos() pointer? >>>>>>>>>> >>>>>>>>>> I.e., unschedule_txq checks if the txq being removed is >>>>>>>>>> currently >>>>>>>>>> being >>>>>>>>>> pointed to by schedule_pos[ac], and if it is, it updates >>>>>>>>>> schedule_pos >>>>>>>>>> to >>>>>>>>>> be the rb_next of the current value? >>>>>>>>> Actually, if schedule_pos is updated to rb_next of the current >>>>>>>>> value, >>>>>>>>> then in the next_txq() where we are going to use rb_next again >>>>>>>>> and >>>>>>>>> finally pick the next node of the node we really want. Is it >>>>>>>>> fine >>>>>>>>> to >>>>>>>>> update schedule_pos to NULL? >>>>>>>> >>>>>>>> Hmm, yeah, good point. >>>>>>>> >>>>>>>> If we do end up setting schedule_pos to NULL in the middle of a >>>>>>>> scheduling round, that will make next_txq() "start over", and do >>>>>>>> another >>>>>>>> loop through the whole thing. I guess we may be able hit a case >>>>>>>> where >>>>>>>> things can oscillate back and forth between addition and removal >>>>>>>> resulting in an infinite loop? Not sure, but at least I can't >>>>>>>> seem >>>>>>>> to >>>>>>>> convince myself that this can't happen. >>>>>>> >>>>>>> As the loop of next_txq under lock protection as below, >>>>>>> >>>>>>> txq_schedule_start(); >>>>>>> while(txq=next_txq()){ >>>>>>> ... >>>>>>> return_txq(txq); >>>>>>> } >>>>>>> txq_schedule_end(); >>>>>>> >>>>>>> I do not see any chance of addition, no? >>>>>> >>>>>> As you noted in your other email, Felix reduced the locking. And >>>>>> yeah, >>>>>> we need to rebase this series to also incorporate that. I figure I >>>>>> can >>>>>> send an updated version of the first patch in the series once we've >>>>>> worked out the remaining issues with your follow-up patches. >>>>>> >>>>> Oh, I was thinking we were discussing without locking reduced. Yes, >>>>> I >>>>> also agree there might be a case causing infinite loop. With locking >>>>> reduced, the tree can be adjusted between next_txq() and >>>>> return_txq() >>>>> in >>>>> the loop situation. For further discussion, let 's consider, >>>>> 1) the tree starts like: >>>>> A->B->C->D->E >>>>> 2) then next_txq() returns A for dequeuing >>>>> 3) driver dequeues A and draines A without any active txq locked >>>>> meaning >>>>> the tree could be changed upon Tx compeletion. >>>>> 4) then in return_txq(), the tree could be, >>>>> i A->B->C->D->E （A is empty, and maybe soon be added back >>>>> before the loop end） >>>>> ii B->C->A->D->E （A is empty, and maybe soon be added back >>>>> before the loop end） >>>>> iii B->C->D->E->A （A is empty, and maybe soon be added back >>>>> before the loop end) >>>>> >>>>> with this change: >>>>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>>>> >>>>> for case i, local->schedule_pos[ac] is rb_next(A) which is B, and in >>>>> next_txq(), rb_next(B) is what we returns which actually is C and B >>>>> is >>>>> skipped, no? >>>>> >>>>> Similiar for case ii, we skip B, C, D. >>>> >>>> Yup, I think you're right. But if we can fix this by making >>>> ieee80211_resort_txq() aware of the schedule_pos as well, no? I.e., >>>> if >>>> resort_txq() acts on the txq that's currently in schedule_pos, it >>>> will >>>> update schedule pos with the same rb_next(node) ?: rb_prev(node); >>>> (optionally after checking that the position of the node is actually >>>> going to change). >>> Sorry, please igore last email sent by mistake. >>> >>> I don't think it makes any difference with that in unschedule_txq(). >>> For >>> case i, it finally picks C as well in next_txq(). For next_txq(), >>> schedule_pos means previous candidate node whereas with your change, >>> it >>> looks like schedule_pos is current candidate node instead. >> >> Hmm, that was not actually what I was thinking, but yeah I think you're >> right that it would be easier to just change it so schedule_pos is >> pointing to the next and not the current txq we want to schedule. > So do you mean we can change next_txq like this, > > struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 > ac) > { > struct ieee80211_local *local = hw_to_local(hw); > struct rb_node *node = local->schedule_pos[ac]; > struct txq_info *txqi = NULL; > bool first = false; > > lockdep_assert_held(&local->active_txq_lock[ac]); > > if (!node) { > node = rb_first_cached(&local->active_txqs[ac]); > first = true; > - } else > - node = rb_next(node); > + } > + > if (!node) > return NULL; Ah, no, now I remember why this didn't work and I went with the other approach: If you make this change, you also have to have this at the end: local->schedule_pos[ac] = rb_next(node); But this means we can no longer distinguish between having gone through the whole thing (so rb_next() returns NULL), or starting out with nothing. So, instead we need to keep next_txq() the way it is, and just add local->schedule_pos[ac] = rb_prev(node); whenever we remove a node (both in return_txq() and resort_txq()). >> >> We'd still need a check in resort_txq() then, but it would make it safe >> to unschedule in return_txq()... > Yes, agree with that. > > >> >>>>> Also I am wondering if there will be some SMP issues relating with >>>>> local->schedule_pos[ac]. >>>> >>>> Not sure what you mean by this? >>> My bad. Please ignore this. >>> >>> >>>> >>>>>>> In ath10k, we will usually push packets of first txq as many as we >>>>>>> can >>>>>>> until it is drained and then move to the next one. So if a txq >>>>>>> gets >>>>>>> removed in the return_txq, it should always be the leftmost. And >>>>>>> during this period, neither vt of any station or global vt can be >>>>>>> updated due to lock protection. >>>>>>> >>>>>>>> >>>>>>>> But in that case, we could fix it by just conditionally assigning >>>>>>>> either >>>>>>>> rb_next or rb_prev to the schedule_pos in unschedule_txq()? I.e., >>>>>>>> something like: >>>>>>>> >>>>>>>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>>>>>> I am not sure I am getting your point. Still in next_txq, >>>>>>> schedule_pos[ac] will lead us to the next node of the one we want. >>>>>> >>>>>> The logic in next_txq is different when schedule_pos[ac] is NULL, >>>>>> vs >>>>>> when rb_next(schedule_pos[ac]) is NULL. The former restarts a new >>>>>> scheduling round, while the latter ends the current round. >>>>>> >>>>>> -Toke >>>>> >>>>> -- >>>>> Yibo >>> >>> -- >>> Yibo > > -- > Yibo
On 2019-09-21 22:00, Toke Høiland-Jørgensen wrote: > Yibo Zhao <yiboz@codeaurora.org> writes: > >> On 2019-09-21 21:02, Toke Høiland-Jørgensen wrote: >>> Yibo Zhao <yiboz@codeaurora.org> writes: >>> >>>> On 2019-09-21 19:27, Toke Høiland-Jørgensen wrote: >>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>> >>>>>> On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: >>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>> >>>>>>>> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>> >>>>>>>>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>> >>>>>>>>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>>>> >>>>>>>>>>>>>> In a loop txqs dequeue scenario, if the first txq in the >>>>>>>>>>>>>> rbtree >>>>>>>>>>>>>> gets >>>>>>>>>>>>>> removed from rbtree immediately in the >>>>>>>>>>>>>> ieee80211_return_txq(), >>>>>>>>>>>>>> the >>>>>>>>>>>>>> loop will break soon in the ieee80211_next_txq() due to >>>>>>>>>>>>>> schedule_pos >>>>>>>>>>>>>> not leading to the second txq in the rbtree. Thus, >>>>>>>>>>>>>> defering >>>>>>>>>>>>>> the >>>>>>>>>>>>>> removal right before the end of this schedule round. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>>>>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>>>>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>>>>>>>>>>>> >>>>>>>>>>>>> I didn't write this patch, so please don't use my sign-off. >>>>>>>>>>>>> I'll >>>>>>>>>>>>> add >>>>>>>>>>>>> ack or review tags as appropriate in reply; but a few >>>>>>>>>>>>> comments >>>>>>>>>>>>> first: >>>>>>>>>>>>> >>>>>>>>>>>>>> --- >>>>>>>>>>>>>> include/net/mac80211.h | 16 ++++++++++-- >>>>>>>>>>>>>> net/mac80211/ieee80211_i.h | 3 +++ >>>>>>>>>>>>>> net/mac80211/main.c | 6 +++++ >>>>>>>>>>>>>> net/mac80211/tx.c | 63 >>>>>>>>>>>>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>>>>>>>>>>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>>>>>>>>>>>> >>>>>>>>>>>>>> diff --git a/include/net/mac80211.h >>>>>>>>>>>>>> b/include/net/mac80211.h >>>>>>>>>>>>>> index ac2ed8e..ba5a345 100644 >>>>>>>>>>>>>> --- a/include/net/mac80211.h >>>>>>>>>>>>>> +++ b/include/net/mac80211.h >>>>>>>>>>>>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>>>>>>>>>>>> >>>>>>>>>>>>>> #define IEEE80211_MAX_TX_RETRY 31 >>>>>>>>>>>>>> >>>>>>>>>>>>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>>>>>>>>>>>> + >>>>>>>>>>>>>> static inline void ieee80211_rate_set_vht(struct >>>>>>>>>>>>>> ieee80211_tx_rate >>>>>>>>>>>>>> *rate, >>>>>>>>>>>>>> u8 mcs, u8 nss) >>>>>>>>>>>>>> { >>>>>>>>>>>>>> @@ -6232,7 +6234,8 @@ struct sk_buff >>>>>>>>>>>>>> *ieee80211_tx_dequeue(struct >>>>>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>>>>> * @ac: AC number to return packets from. >>>>>>>>>>>>>> * >>>>>>>>>>>>>> * Should only be called between calls to >>>>>>>>>>>>>> ieee80211_txq_schedule_start() >>>>>>>>>>>>>> - * and ieee80211_txq_schedule_end(). >>>>>>>>>>>>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, >>>>>>>>>>>>>> it >>>>>>>>>>>>>> will >>>>>>>>>>>>>> be >>>>>>>>>>>>>> added >>>>>>>>>>>>>> + * to a remove list and get removed later. >>>>>>>>>>>>>> * Returns the next txq if successful, %NULL if no queue >>>>>>>>>>>>>> is >>>>>>>>>>>>>> eligible. >>>>>>>>>>>>>> If a txq >>>>>>>>>>>>>> * is returned, it should be returned with >>>>>>>>>>>>>> ieee80211_return_txq() >>>>>>>>>>>>>> after the >>>>>>>>>>>>>> * driver has finished scheduling it. >>>>>>>>>>>>>> @@ -6268,7 +6271,8 @@ void >>>>>>>>>>>>>> ieee80211_txq_schedule_start(struct >>>>>>>>>>>>>> ieee80211_hw *hw, u8 ac) >>>>>>>>>>>>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>>>>>>>>>>>> * @ac: AC number to acquire locks for >>>>>>>>>>>>>> * >>>>>>>>>>>>>> - * Release locks previously acquired by >>>>>>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>>>>>> + * Release locks previously acquired by >>>>>>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>>>>>> Check >>>>>>>>>>>>>> + * and remove the empty txq from rb-tree. >>>>>>>>>>>>>> */ >>>>>>>>>>>>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, >>>>>>>>>>>>>> u8 >>>>>>>>>>>>>> ac) >>>>>>>>>>>>>> __releases(txq_lock); >>>>>>>>>>>>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>>>> *hw, struct ieee80211_txq *txq) >>>>>>>>>>>>>> __acquires(txq_lock) __releases(txq_lock); >>>>>>>>>>>>>> >>>>>>>>>>>>>> /** >>>>>>>>>>>>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>>>>>>>>>>>> + * >>>>>>>>>>>>>> + * @tmr: pointer as obtained from local >>>>>>>>>>>>>> + * >>>>>>>>>>>>>> + */ >>>>>>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>>>>>>>>>>>> + >>>>>>>>>>>>>> +/** >>>>>>>>>>>>>> * ieee80211_txq_may_transmit - check whether TXQ is >>>>>>>>>>>>>> allowed >>>>>>>>>>>>>> to >>>>>>>>>>>>>> transmit >>>>>>>>>>>>>> * >>>>>>>>>>>>>> * This function is used to check whether given txq is >>>>>>>>>>>>>> allowed >>>>>>>>>>>>>> to >>>>>>>>>>>>>> transmit by >>>>>>>>>>>>>> diff --git a/net/mac80211/ieee80211_i.h >>>>>>>>>>>>>> b/net/mac80211/ieee80211_i.h >>>>>>>>>>>>>> index a4556f9..49aa143e 100644 >>>>>>>>>>>>>> --- a/net/mac80211/ieee80211_i.h >>>>>>>>>>>>>> +++ b/net/mac80211/ieee80211_i.h >>>>>>>>>>>>>> @@ -847,6 +847,7 @@ struct txq_info { >>>>>>>>>>>>>> struct codel_stats cstats; >>>>>>>>>>>>>> struct sk_buff_head frags; >>>>>>>>>>>>>> struct rb_node schedule_order; >>>>>>>>>>>>>> + struct list_head candidate; >>>>>>>>>>>>>> unsigned long flags; >>>>>>>>>>>>>> >>>>>>>>>>>>>> /* keep last! */ >>>>>>>>>>>>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>>>>>>>>>>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>>>>>>>>>>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>>>>>>>>>>>> >>>>>>>>>>>>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>>>>>>>>>>>> + struct timer_list remove_timer; >>>>>>>>>>>>>> u16 airtime_flags; >>>>>>>>>>>>>> >>>>>>>>>>>>>> const struct ieee80211_ops *ops; >>>>>>>>>>>>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>>>>>>>>>>>> index e9ffa8e..78fe24a 100644 >>>>>>>>>>>>>> --- a/net/mac80211/main.c >>>>>>>>>>>>>> +++ b/net/mac80211/main.c >>>>>>>>>>>>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>>>>>>>>>>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>>>>>>>>>>>> >>>>>>>>>>>>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>>>>>>>>>>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>>>>>>>>>>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>>>>>>>>>>>> spin_lock_init(&local->active_txq_lock[i]); >>>>>>>>>>>>>> } >>>>>>>>>>>>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>>>>>>>>>>>> >>>>>>>>>>>>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, >>>>>>>>>>>>>> 0); >>>>>>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>>>>>> + jiffies + >>>>>>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>>>>>> + >>>>>>>>>>>>>> INIT_LIST_HEAD(&local->chanctx_list); >>>>>>>>>>>>>> mutex_init(&local->chanctx_mtx); >>>>>>>>>>>>>> >>>>>>>>>>>>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>>>> *hw) >>>>>>>>>>>>>> tasklet_kill(&local->tx_pending_tasklet); >>>>>>>>>>>>>> tasklet_kill(&local->tasklet); >>>>>>>>>>>>>> >>>>>>>>>>>>>> + del_timer_sync(&local->remove_timer); >>>>>>>>>>>>>> #ifdef CONFIG_INET >>>>>>>>>>>>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>>>>>>>>>>>> #endif >>>>>>>>>>>>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>>>>>>>>>>>> index d00baaa..42ca010 100644 >>>>>>>>>>>>>> --- a/net/mac80211/tx.c >>>>>>>>>>>>>> +++ b/net/mac80211/tx.c >>>>>>>>>>>>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>>>>>>>>>>>> ieee80211_sub_if_data *sdata, >>>>>>>>>>>>>> codel_stats_init(&txqi->cstats); >>>>>>>>>>>>>> __skb_queue_head_init(&txqi->frags); >>>>>>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>>>>>> + INIT_LIST_HEAD(&txqi->candidate); >>>>>>>>>>>>>> >>>>>>>>>>>>>> txqi->txq.vif = &sdata->vif; >>>>>>>>>>>>>> >>>>>>>>>>>>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>>>> *hw, >>>>>>>>>>>>>> >>>>>>>>>>>>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>>>>> >>>>>>>>>>>>>> + if (!list_empty(&txqi->candidate)) >>>>>>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>>>>>> + >>>>>>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>>>>>>>>>>>> goto out; >>>>>>>>>>>>>> >>>>>>>>>>>>>> @@ -3783,6 +3787,20 @@ static void >>>>>>>>>>>>>> __ieee80211_unschedule_txq(struct >>>>>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>>>>>> } >>>>>>>>>>>>>> >>>>>>>>>>>>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>>>>>>>>>>>> + struct ieee80211_txq *txq) >>>>>>>>>>>>>> +{ >>>>>>>>>>>>>> + struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>>>>>> + struct txq_info *txqi = to_txq_info(txq); >>>>>>>>>>>>>> + >>>>>>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>>>> + >>>>>>>>>>>>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>>>>>>>>>>>> + __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>>>>>> + } >>>>>>>>>>>>>> +} >>>>>>>>>>>>>> + >>>>>>>>>>>>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>>>>>>>>>>>> struct ieee80211_txq *txq) >>>>>>>>>>>>>> __acquires(txq_lock) __releases(txq_lock) >>>>>>>>>>>>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>>>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>>>>> struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>>>>>> >>>>>>>>>>>>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>>>>> + ieee80211_remove_txq(hw, txq); >>>>>>>>>>>>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>>>> } >>>>>>>>>>>>>> >>>>>>>>>>>>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>>>> *hw, >>>>>>>>>>>>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>>>> >>>>>>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>>>>>>>>>>>> - (skb_queue_empty(&txqi->frags) && >>>>>>>>>>>>>> !txqi->tin.backlog_packets)) >>>>>>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>>>>> + !txq_has_queue(&txqi->txq) && >>>>>>>>>>>>>> + list_empty(&txqi->candidate)) >>>>>>>>>>>>>> + list_add_tail(&txqi->candidate, >>>>>>>>>>>>>> &local->remove_list[txq->ac]); >>>>>>>>>>>>>> + >>>>>>>>>>>>>> } >>>>>>>>>>>>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>>>>>>>>>>>> >>>>>>>>>>>>>> +void __ieee80211_check_txqs(struct ieee80211_local >>>>>>>>>>>>>> *local, >>>>>>>>>>>>>> int >>>>>>>>>>>>>> ac) >>>>>>>>>>>>>> +{ >>>>>>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>>>>>> + struct sta_info *sta; >>>>>>>>>>>>>> + >>>>>>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>>>>>>>>>>>> + >>>>>>>>>>>>>> + list_for_each_entry_safe(iter, tmp, >>>>>>>>>>>>>> &local->remove_list[ac], >>>>>>>>>>>>>> + candidate) { >>>>>>>>>>>>>> + sta = container_of(iter->txq.sta, struct sta_info, >>>>>>>>>>>>>> sta); >>>>>>>>>>>>>> + >>>>>>>>>>>>>> + if (txq_has_queue(&iter->txq)) >>>>>>>>>>>>>> + list_del_init(&iter->candidate); >>>>>>>>>>>>>> + else >>>>>>>>>>>>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>>>>>>>>>>>> + } >>>>>>>>>>>>>> +} >>>>>>>>>>>>>> + >>>>>>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *t) >>>>>>>>>>>>>> +{ >>>>>>>>>>>>>> + struct ieee80211_local *local = from_timer(local, t, >>>>>>>>>>>>>> remove_timer); >>>>>>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>>>>>> + struct sta_info *sta; >>>>>>>>>>>>>> + int ac; >>>>>>>>>>>>>> + >>>>>>>>>>>>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>>>>>>>>>>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>>>>> + __ieee80211_check_txqs(local, ac); >>>>>>>>>>>>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>>>>> + } >>>>>>>>>>>>>> + >>>>>>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>>>>>> + jiffies + >>>>>>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>>>>>> +} >>>>>>>>>>>>> >>>>>>>>>>>>> I'll ask the same as I did last time (where you told me to >>>>>>>>>>>>> hold >>>>>>>>>>>>> off >>>>>>>>>>>>> until this round): >>>>>>>>>>>>> >>>>>>>>>>>>> Why do you need the timer and the periodic check? If TXQs >>>>>>>>>>>>> are >>>>>>>>>>>>> added >>>>>>>>>>>>> to >>>>>>>>>>>>> the remove list during the scheduling run, and >>>>>>>>>>>>> __ieee80211_check_txqs() >>>>>>>>>>>>> is run from schedule_end(), isn't that sufficient to clear >>>>>>>>>>>>> the >>>>>>>>>>>>> list? >>>>>>>>>>>> Is it possible that a txq is not added to the remove list >>>>>>>>>>>> but >>>>>>>>>>>> then >>>>>>>>>>>> packets in it are dropped by fq_codel algo? Like the station >>>>>>>>>>>> disconnects >>>>>>>>>>>> without any notification. >>>>>>>>>>> >>>>>>>>>>> Well as long as all the other cleanup paths call directly >>>>>>>>>>> into >>>>>>>>>>> __unschedule_txq(), that should remove stations from the >>>>>>>>>>> scheduler >>>>>>>>>>> when >>>>>>>>>>> they disconnect etc. >>>>>>>>>> Yes, the disconnect scenario is a bad example. My concern is, >>>>>>>>>> say, >>>>>>>>>> we >>>>>>>>>> have 10 stations and only one of them is assigned a very small >>>>>>>>>> weight >>>>>>>>>> compared with that of others. Suppose, after its chance of Tx, >>>>>>>>>> it >>>>>>>>>> is >>>>>>>>>> most likely to be placed in the rightmost(still has some >>>>>>>>>> packets >>>>>>>>>> in >>>>>>>>>> the >>>>>>>>>> txq) and no more incoming data for it. The remaining packets >>>>>>>>>> in >>>>>>>>>> txq >>>>>>>>>> will >>>>>>>>>> be dropped due to timeout algo in codel(correct me if I am >>>>>>>>>> wrong) >>>>>>>>>> but >>>>>>>>>> this empty txq will stay on the rbtree until other txqs get >>>>>>>>>> drained >>>>>>>>>> or >>>>>>>>>> global vt catch up with its vt. The staying time could be long >>>>>>>>>> if >>>>>>>>>> weight >>>>>>>>>> is extremely small. Then do we need timer to check or any >>>>>>>>>> other >>>>>>>>>> better >>>>>>>>>> solution? >>>>>>>>> >>>>>>>>> Ah, I see what you mean. No, I don't think this will be a >>>>>>>>> problem; >>>>>>>>> the >>>>>>>>> scenario you're describing would play out like this: >>>>>>>>> >>>>>>>>> 1. Station ends transmitting, still has a single packet queued, >>>>>>>>> gets >>>>>>>>> moved to the end of the rbtree (and stays there for a >>>>>>>>> while). >>>>>>>>> >>>>>>>>> 2. When we finally get to the point where this station gets >>>>>>>>> another >>>>>>>>> chance to transmit, the CoDel drop timer triggers and the >>>>>>>>> last >>>>>>>>> packet >>>>>>>>> is dropped[0]. This means that the queue will just be empty >>>>>>>>> (and ieee80211_tx_dequeue() will return NULL). >>>>>>>>> >>>>>>>>> 3. Because the queue is empty, ieee80211_return_txq() will not >>>>>>>>> put >>>>>>>>> it >>>>>>>>> back on the rbtree. >>>>>>>>> >>>>>>>>> Crucially, in 2. the CoDel algorithm doesn't kick in until the >>>>>>>>> point >>>>>>>>> of >>>>>>>>> packet dequeue. But even if an empty queue stays on the rbtree >>>>>>>>> for >>>>>>>>> a >>>>>>>>> while, there is no harm in that: eventually it will get its >>>>>>>>> turn, >>>>>>>>> it >>>>>>>>> will turn out to be empty, and just be skipped over. >>>>>>>> Then that will be fine. Thanks for the explanation of the >>>>>>>> dropping >>>>>>>> part >>>>>>>> in CoDel algorithm. >>>>>>> >>>>>>> Yup, think so. And you're welcome :) >>>>>>> >>>>>>>>> The issue we need to be concerned about is the opposite: If we >>>>>>>>> have >>>>>>>>> a >>>>>>>>> queue that *does* have packets queued, but which is *not* >>>>>>>>> scheduled >>>>>>>>> for >>>>>>>>> transmission, that will stall TX. >>>>>>>> Is it by design since its vt is more than global vt, right? The >>>>>>>> lattency >>>>>>>> may somehow get impacted though. >>>>>>> >>>>>>> Well, it should still stay on the rbtree as long as it has >>>>>>> packets >>>>>>> queued. We don't have a check anywhere that reschedules TXQs >>>>>>> whose >>>>>>> v_t >>>>>>> drops below global v_t... >>>>>>> >>>>>>>>> [0] CoDel in most cases only drops a single packet at a time, >>>>>>>>> so >>>>>>>>> it >>>>>>>>> will >>>>>>>>> not clear out an entire queue with multiple packets in one go. >>>>>>>>> But >>>>>>>>> you >>>>>>>>> are right that it could conceivably drop the last packet in a >>>>>>>>> queue. >>>>>>>>> >>>>>>>>>>> We only need to defer removal inside a single "scheduling >>>>>>>>>>> round" >>>>>>>>>>> (i.e., >>>>>>>>>>> between a pair of ieee80211_txq_schedule_start/end. So if we >>>>>>>>>>> just >>>>>>>>>>> walk >>>>>>>>>>> the remove list in schedule_end() we should be enough, no? >>>>>>>>>>> >>>>>>>>>>> Hmm, or maybe a simpler way to fix the original issue is just >>>>>>>>>>> to >>>>>>>>>>> have >>>>>>>>>>> unschedule_txq() update the schedule_pos() pointer? >>>>>>>>>>> >>>>>>>>>>> I.e., unschedule_txq checks if the txq being removed is >>>>>>>>>>> currently >>>>>>>>>>> being >>>>>>>>>>> pointed to by schedule_pos[ac], and if it is, it updates >>>>>>>>>>> schedule_pos >>>>>>>>>>> to >>>>>>>>>>> be the rb_next of the current value? >>>>>>>>>> Actually, if schedule_pos is updated to rb_next of the current >>>>>>>>>> value, >>>>>>>>>> then in the next_txq() where we are going to use rb_next again >>>>>>>>>> and >>>>>>>>>> finally pick the next node of the node we really want. Is it >>>>>>>>>> fine >>>>>>>>>> to >>>>>>>>>> update schedule_pos to NULL? >>>>>>>>> >>>>>>>>> Hmm, yeah, good point. >>>>>>>>> >>>>>>>>> If we do end up setting schedule_pos to NULL in the middle of a >>>>>>>>> scheduling round, that will make next_txq() "start over", and >>>>>>>>> do >>>>>>>>> another >>>>>>>>> loop through the whole thing. I guess we may be able hit a case >>>>>>>>> where >>>>>>>>> things can oscillate back and forth between addition and >>>>>>>>> removal >>>>>>>>> resulting in an infinite loop? Not sure, but at least I can't >>>>>>>>> seem >>>>>>>>> to >>>>>>>>> convince myself that this can't happen. >>>>>>>> >>>>>>>> As the loop of next_txq under lock protection as below, >>>>>>>> >>>>>>>> txq_schedule_start(); >>>>>>>> while(txq=next_txq()){ >>>>>>>> ... >>>>>>>> return_txq(txq); >>>>>>>> } >>>>>>>> txq_schedule_end(); >>>>>>>> >>>>>>>> I do not see any chance of addition, no? >>>>>>> >>>>>>> As you noted in your other email, Felix reduced the locking. And >>>>>>> yeah, >>>>>>> we need to rebase this series to also incorporate that. I figure >>>>>>> I >>>>>>> can >>>>>>> send an updated version of the first patch in the series once >>>>>>> we've >>>>>>> worked out the remaining issues with your follow-up patches. >>>>>>> >>>>>> Oh, I was thinking we were discussing without locking reduced. >>>>>> Yes, >>>>>> I >>>>>> also agree there might be a case causing infinite loop. With >>>>>> locking >>>>>> reduced, the tree can be adjusted between next_txq() and >>>>>> return_txq() >>>>>> in >>>>>> the loop situation. For further discussion, let 's consider, >>>>>> 1) the tree starts like: >>>>>> A->B->C->D->E >>>>>> 2) then next_txq() returns A for dequeuing >>>>>> 3) driver dequeues A and draines A without any active txq locked >>>>>> meaning >>>>>> the tree could be changed upon Tx compeletion. >>>>>> 4) then in return_txq(), the tree could be, >>>>>> i A->B->C->D->E （A is empty, and maybe soon be added >>>>>> back >>>>>> before the loop end） >>>>>> ii B->C->A->D->E （A is empty, and maybe soon be added >>>>>> back >>>>>> before the loop end） >>>>>> iii B->C->D->E->A （A is empty, and maybe soon be added >>>>>> back >>>>>> before the loop end) >>>>>> >>>>>> with this change: >>>>>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>>>>> >>>>>> for case i, local->schedule_pos[ac] is rb_next(A) which is B, and >>>>>> in >>>>>> next_txq(), rb_next(B) is what we returns which actually is C and >>>>>> B >>>>>> is >>>>>> skipped, no? >>>>>> >>>>>> Similiar for case ii, we skip B, C, D. >>>>> >>>>> Yup, I think you're right. But if we can fix this by making >>>>> ieee80211_resort_txq() aware of the schedule_pos as well, no? I.e., >>>>> if >>>>> resort_txq() acts on the txq that's currently in schedule_pos, it >>>>> will >>>>> update schedule pos with the same rb_next(node) ?: rb_prev(node); >>>>> (optionally after checking that the position of the node is >>>>> actually >>>>> going to change). >>>> Sorry, please igore last email sent by mistake. >>>> >>>> I don't think it makes any difference with that in unschedule_txq(). >>>> For >>>> case i, it finally picks C as well in next_txq(). For next_txq(), >>>> schedule_pos means previous candidate node whereas with your change, >>>> it >>>> looks like schedule_pos is current candidate node instead. >>> >>> Hmm, that was not actually what I was thinking, but yeah I think >>> you're >>> right that it would be easier to just change it so schedule_pos is >>> pointing to the next and not the current txq we want to schedule. >> So do you mean we can change next_txq like this, >> >> struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 >> ac) >> { >> struct ieee80211_local *local = hw_to_local(hw); >> struct rb_node *node = local->schedule_pos[ac]; >> struct txq_info *txqi = NULL; >> bool first = false; >> >> lockdep_assert_held(&local->active_txq_lock[ac]); >> >> if (!node) { >> node = rb_first_cached(&local->active_txqs[ac]); >> first = true; >> - } else >> - node = rb_next(node); >> + } >> + >> if (!node) >> return NULL; > > Ah, no, now I remember why this didn't work and I went with the other > approach: If you make this change, you also have to have this at the > end: > > local->schedule_pos[ac] = rb_next(node); > > > But this means we can no longer distinguish between having gone through > the whole thing (so rb_next() returns NULL), or starting out with > nothing. > > So, instead we need to keep next_txq() the way it is, and just add Right, should keep next_txq() the way it is. > > local->schedule_pos[ac] = rb_prev(node); > > whenever we remove a node (both in return_txq() and resort_txq()). Agree, and also we may need to consider case like A is removed and soon be added back just the same as ii), B->C->A->D->E then B is schedule, removed and soon added back, C->A->B->D->E A and B will have a second chance to be scheduled and this may happen to others as well leading to the infinite loop as you have mentioned previously, so do we need to maintain a schedule_round like we do in DRR? Like, - If the node is in the same round, by pass schedule, go to rb_next(), either continue loop this round or end this round. - Increase the schedule_round at the schedule_start() only when the schedule_pos is NULL. > >>> >>> We'd still need a check in resort_txq() then, but it would make it >>> safe >>> to unschedule in return_txq()... >> Yes, agree with that. >> >> >>> >>>>>> Also I am wondering if there will be some SMP issues relating with >>>>>> local->schedule_pos[ac]. >>>>> >>>>> Not sure what you mean by this? >>>> My bad. Please ignore this. >>>> >>>> >>>>> >>>>>>>> In ath10k, we will usually push packets of first txq as many as >>>>>>>> we >>>>>>>> can >>>>>>>> until it is drained and then move to the next one. So if a txq >>>>>>>> gets >>>>>>>> removed in the return_txq, it should always be the leftmost. And >>>>>>>> during this period, neither vt of any station or global vt can >>>>>>>> be >>>>>>>> updated due to lock protection. >>>>>>>> >>>>>>>>> >>>>>>>>> But in that case, we could fix it by just conditionally >>>>>>>>> assigning >>>>>>>>> either >>>>>>>>> rb_next or rb_prev to the schedule_pos in unschedule_txq()? >>>>>>>>> I.e., >>>>>>>>> something like: >>>>>>>>> >>>>>>>>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>>>>>>> I am not sure I am getting your point. Still in next_txq, >>>>>>>> schedule_pos[ac] will lead us to the next node of the one we >>>>>>>> want. >>>>>>> >>>>>>> The logic in next_txq is different when schedule_pos[ac] is NULL, >>>>>>> vs >>>>>>> when rb_next(schedule_pos[ac]) is NULL. The former restarts a new >>>>>>> scheduling round, while the latter ends the current round. >>>>>>> >>>>>>> -Toke >>>>>> >>>>>> -- >>>>>> Yibo >>>> >>>> -- >>>> Yibo >> >> -- >> Yibo
Yibo Zhao <yiboz@codeaurora.org> writes: > On 2019-09-21 22:00, Toke Høiland-Jørgensen wrote: >> Yibo Zhao <yiboz@codeaurora.org> writes: >> >>> On 2019-09-21 21:02, Toke Høiland-Jørgensen wrote: >>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>> >>>>> On 2019-09-21 19:27, Toke Høiland-Jørgensen wrote: >>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>> >>>>>>> On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: >>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>> >>>>>>>>> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>> >>>>>>>>>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>>> >>>>>>>>>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> In a loop txqs dequeue scenario, if the first txq in the >>>>>>>>>>>>>>> rbtree >>>>>>>>>>>>>>> gets >>>>>>>>>>>>>>> removed from rbtree immediately in the >>>>>>>>>>>>>>> ieee80211_return_txq(), >>>>>>>>>>>>>>> the >>>>>>>>>>>>>>> loop will break soon in the ieee80211_next_txq() due to >>>>>>>>>>>>>>> schedule_pos >>>>>>>>>>>>>>> not leading to the second txq in the rbtree. Thus, >>>>>>>>>>>>>>> defering >>>>>>>>>>>>>>> the >>>>>>>>>>>>>>> removal right before the end of this schedule round. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>>>>>>> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> >>>>>>>>>>>>>>> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> >>>>>>>>>>>>>> >>>>>>>>>>>>>> I didn't write this patch, so please don't use my sign-off. >>>>>>>>>>>>>> I'll >>>>>>>>>>>>>> add >>>>>>>>>>>>>> ack or review tags as appropriate in reply; but a few >>>>>>>>>>>>>> comments >>>>>>>>>>>>>> first: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> --- >>>>>>>>>>>>>>> include/net/mac80211.h | 16 ++++++++++-- >>>>>>>>>>>>>>> net/mac80211/ieee80211_i.h | 3 +++ >>>>>>>>>>>>>>> net/mac80211/main.c | 6 +++++ >>>>>>>>>>>>>>> net/mac80211/tx.c | 63 >>>>>>>>>>>>>>> +++++++++++++++++++++++++++++++++++++++++++--- >>>>>>>>>>>>>>> 4 files changed, 83 insertions(+), 5 deletions(-) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> diff --git a/include/net/mac80211.h >>>>>>>>>>>>>>> b/include/net/mac80211.h >>>>>>>>>>>>>>> index ac2ed8e..ba5a345 100644 >>>>>>>>>>>>>>> --- a/include/net/mac80211.h >>>>>>>>>>>>>>> +++ b/include/net/mac80211.h >>>>>>>>>>>>>>> @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> #define IEEE80211_MAX_TX_RETRY 31 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> static inline void ieee80211_rate_set_vht(struct >>>>>>>>>>>>>>> ieee80211_tx_rate >>>>>>>>>>>>>>> *rate, >>>>>>>>>>>>>>> u8 mcs, u8 nss) >>>>>>>>>>>>>>> { >>>>>>>>>>>>>>> @@ -6232,7 +6234,8 @@ struct sk_buff >>>>>>>>>>>>>>> *ieee80211_tx_dequeue(struct >>>>>>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>>>>>> * @ac: AC number to return packets from. >>>>>>>>>>>>>>> * >>>>>>>>>>>>>>> * Should only be called between calls to >>>>>>>>>>>>>>> ieee80211_txq_schedule_start() >>>>>>>>>>>>>>> - * and ieee80211_txq_schedule_end(). >>>>>>>>>>>>>>> + * and ieee80211_txq_schedule_end(). If the txq is empty, >>>>>>>>>>>>>>> it >>>>>>>>>>>>>>> will >>>>>>>>>>>>>>> be >>>>>>>>>>>>>>> added >>>>>>>>>>>>>>> + * to a remove list and get removed later. >>>>>>>>>>>>>>> * Returns the next txq if successful, %NULL if no queue >>>>>>>>>>>>>>> is >>>>>>>>>>>>>>> eligible. >>>>>>>>>>>>>>> If a txq >>>>>>>>>>>>>>> * is returned, it should be returned with >>>>>>>>>>>>>>> ieee80211_return_txq() >>>>>>>>>>>>>>> after the >>>>>>>>>>>>>>> * driver has finished scheduling it. >>>>>>>>>>>>>>> @@ -6268,7 +6271,8 @@ void >>>>>>>>>>>>>>> ieee80211_txq_schedule_start(struct >>>>>>>>>>>>>>> ieee80211_hw *hw, u8 ac) >>>>>>>>>>>>>>> * @hw: pointer as obtained from ieee80211_alloc_hw() >>>>>>>>>>>>>>> * @ac: AC number to acquire locks for >>>>>>>>>>>>>>> * >>>>>>>>>>>>>>> - * Release locks previously acquired by >>>>>>>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>>>>>>> + * Release locks previously acquired by >>>>>>>>>>>>>>> ieee80211_txq_schedule_end(). >>>>>>>>>>>>>>> Check >>>>>>>>>>>>>>> + * and remove the empty txq from rb-tree. >>>>>>>>>>>>>>> */ >>>>>>>>>>>>>>> void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, >>>>>>>>>>>>>>> u8 >>>>>>>>>>>>>>> ac) >>>>>>>>>>>>>>> __releases(txq_lock); >>>>>>>>>>>>>>> @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct >>>>>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>>>>> *hw, struct ieee80211_txq *txq) >>>>>>>>>>>>>>> __acquires(txq_lock) __releases(txq_lock); >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /** >>>>>>>>>>>>>>> + * ieee80211_txqs_check - Check txqs waiting for removal >>>>>>>>>>>>>>> + * >>>>>>>>>>>>>>> + * @tmr: pointer as obtained from local >>>>>>>>>>>>>>> + * >>>>>>>>>>>>>>> + */ >>>>>>>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *tmr); >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> +/** >>>>>>>>>>>>>>> * ieee80211_txq_may_transmit - check whether TXQ is >>>>>>>>>>>>>>> allowed >>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> transmit >>>>>>>>>>>>>>> * >>>>>>>>>>>>>>> * This function is used to check whether given txq is >>>>>>>>>>>>>>> allowed >>>>>>>>>>>>>>> to >>>>>>>>>>>>>>> transmit by >>>>>>>>>>>>>>> diff --git a/net/mac80211/ieee80211_i.h >>>>>>>>>>>>>>> b/net/mac80211/ieee80211_i.h >>>>>>>>>>>>>>> index a4556f9..49aa143e 100644 >>>>>>>>>>>>>>> --- a/net/mac80211/ieee80211_i.h >>>>>>>>>>>>>>> +++ b/net/mac80211/ieee80211_i.h >>>>>>>>>>>>>>> @@ -847,6 +847,7 @@ struct txq_info { >>>>>>>>>>>>>>> struct codel_stats cstats; >>>>>>>>>>>>>>> struct sk_buff_head frags; >>>>>>>>>>>>>>> struct rb_node schedule_order; >>>>>>>>>>>>>>> + struct list_head candidate; >>>>>>>>>>>>>>> unsigned long flags; >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> /* keep last! */ >>>>>>>>>>>>>>> @@ -1145,6 +1146,8 @@ struct ieee80211_local { >>>>>>>>>>>>>>> u64 airtime_v_t[IEEE80211_NUM_ACS]; >>>>>>>>>>>>>>> u64 airtime_weight_sum[IEEE80211_NUM_ACS]; >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> + struct list_head remove_list[IEEE80211_NUM_ACS]; >>>>>>>>>>>>>>> + struct timer_list remove_timer; >>>>>>>>>>>>>>> u16 airtime_flags; >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> const struct ieee80211_ops *ops; >>>>>>>>>>>>>>> diff --git a/net/mac80211/main.c b/net/mac80211/main.c >>>>>>>>>>>>>>> index e9ffa8e..78fe24a 100644 >>>>>>>>>>>>>>> --- a/net/mac80211/main.c >>>>>>>>>>>>>>> +++ b/net/mac80211/main.c >>>>>>>>>>>>>>> @@ -667,10 +667,15 @@ struct ieee80211_hw >>>>>>>>>>>>>>> *ieee80211_alloc_hw_nm(size_t priv_data_len, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> for (i = 0; i < IEEE80211_NUM_ACS; i++) { >>>>>>>>>>>>>>> local->active_txqs[i] = RB_ROOT_CACHED; >>>>>>>>>>>>>>> + INIT_LIST_HEAD(&local->remove_list[i]); >>>>>>>>>>>>>>> spin_lock_init(&local->active_txq_lock[i]); >>>>>>>>>>>>>>> } >>>>>>>>>>>>>>> local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> + timer_setup(&local->remove_timer, ieee80211_txqs_check, >>>>>>>>>>>>>>> 0); >>>>>>>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>>>>>>> + jiffies + >>>>>>>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> INIT_LIST_HEAD(&local->chanctx_list); >>>>>>>>>>>>>>> mutex_init(&local->chanctx_mtx); >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct >>>>>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>>>>> *hw) >>>>>>>>>>>>>>> tasklet_kill(&local->tx_pending_tasklet); >>>>>>>>>>>>>>> tasklet_kill(&local->tasklet); >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> + del_timer_sync(&local->remove_timer); >>>>>>>>>>>>>>> #ifdef CONFIG_INET >>>>>>>>>>>>>>> unregister_inetaddr_notifier(&local->ifa_notifier); >>>>>>>>>>>>>>> #endif >>>>>>>>>>>>>>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c >>>>>>>>>>>>>>> index d00baaa..42ca010 100644 >>>>>>>>>>>>>>> --- a/net/mac80211/tx.c >>>>>>>>>>>>>>> +++ b/net/mac80211/tx.c >>>>>>>>>>>>>>> @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct >>>>>>>>>>>>>>> ieee80211_sub_if_data *sdata, >>>>>>>>>>>>>>> codel_stats_init(&txqi->cstats); >>>>>>>>>>>>>>> __skb_queue_head_init(&txqi->frags); >>>>>>>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>>>>>>> + INIT_LIST_HEAD(&txqi->candidate); >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> txqi->txq.vif = &sdata->vif; >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct >>>>>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>>>>> *hw, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> + if (!list_empty(&txqi->candidate)) >>>>>>>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order)) >>>>>>>>>>>>>>> goto out; >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> @@ -3783,6 +3787,20 @@ static void >>>>>>>>>>>>>>> __ieee80211_unschedule_txq(struct >>>>>>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>>>>>> RB_CLEAR_NODE(&txqi->schedule_order); >>>>>>>>>>>>>>> } >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> +void ieee80211_remove_txq(struct ieee80211_hw *hw, >>>>>>>>>>>>>>> + struct ieee80211_txq *txq) >>>>>>>>>>>>>>> +{ >>>>>>>>>>>>>>> + struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>>>>>>> + struct txq_info *txqi = to_txq_info(txq); >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { >>>>>>>>>>>>>>> + __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>>>>>> + list_del_init(&txqi->candidate); >>>>>>>>>>>>>>> + } >>>>>>>>>>>>>>> +} >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> void ieee80211_unschedule_txq(struct ieee80211_hw *hw, >>>>>>>>>>>>>>> struct ieee80211_txq *txq) >>>>>>>>>>>>>>> __acquires(txq_lock) __releases(txq_lock) >>>>>>>>>>>>>>> @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct >>>>>>>>>>>>>>> ieee80211_hw *hw, >>>>>>>>>>>>>>> struct ieee80211_local *local = hw_to_local(hw); >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> spin_lock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>>>>>> + ieee80211_remove_txq(hw, txq); >>>>>>>>>>>>>>> spin_unlock_bh(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>>>>> } >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct >>>>>>>>>>>>>>> ieee80211_hw >>>>>>>>>>>>>>> *hw, >>>>>>>>>>>>>>> lockdep_assert_held(&local->active_txq_lock[txq->ac]); >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> if (!RB_EMPTY_NODE(&txqi->schedule_order) && >>>>>>>>>>>>>>> - (skb_queue_empty(&txqi->frags) && >>>>>>>>>>>>>>> !txqi->tin.backlog_packets)) >>>>>>>>>>>>>>> - __ieee80211_unschedule_txq(hw, txq); >>>>>>>>>>>>>>> + !txq_has_queue(&txqi->txq) && >>>>>>>>>>>>>>> + list_empty(&txqi->candidate)) >>>>>>>>>>>>>>> + list_add_tail(&txqi->candidate, >>>>>>>>>>>>>>> &local->remove_list[txq->ac]); >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> } >>>>>>>>>>>>>>> EXPORT_SYMBOL(ieee80211_return_txq); >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> +void __ieee80211_check_txqs(struct ieee80211_local >>>>>>>>>>>>>>> *local, >>>>>>>>>>>>>>> int >>>>>>>>>>>>>>> ac) >>>>>>>>>>>>>>> +{ >>>>>>>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>>>>>>> + struct sta_info *sta; >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> + lockdep_assert_held(&local->active_txq_lock[ac]); >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> + list_for_each_entry_safe(iter, tmp, >>>>>>>>>>>>>>> &local->remove_list[ac], >>>>>>>>>>>>>>> + candidate) { >>>>>>>>>>>>>>> + sta = container_of(iter->txq.sta, struct sta_info, >>>>>>>>>>>>>>> sta); >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> + if (txq_has_queue(&iter->txq)) >>>>>>>>>>>>>>> + list_del_init(&iter->candidate); >>>>>>>>>>>>>>> + else >>>>>>>>>>>>>>> + ieee80211_remove_txq(&local->hw, &iter->txq); >>>>>>>>>>>>>>> + } >>>>>>>>>>>>>>> +} >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> +void ieee80211_txqs_check(struct timer_list *t) >>>>>>>>>>>>>>> +{ >>>>>>>>>>>>>>> + struct ieee80211_local *local = from_timer(local, t, >>>>>>>>>>>>>>> remove_timer); >>>>>>>>>>>>>>> + struct txq_info *iter, *tmp; >>>>>>>>>>>>>>> + struct sta_info *sta; >>>>>>>>>>>>>>> + int ac; >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { >>>>>>>>>>>>>>> + spin_lock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>>>>>> + __ieee80211_check_txqs(local, ac); >>>>>>>>>>>>>>> + spin_unlock_bh(&local->active_txq_lock[ac]); >>>>>>>>>>>>>>> + } >>>>>>>>>>>>>>> + >>>>>>>>>>>>>>> + mod_timer(&local->remove_timer, >>>>>>>>>>>>>>> + jiffies + >>>>>>>>>>>>>>> msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); >>>>>>>>>>>>>>> +} >>>>>>>>>>>>>> >>>>>>>>>>>>>> I'll ask the same as I did last time (where you told me to >>>>>>>>>>>>>> hold >>>>>>>>>>>>>> off >>>>>>>>>>>>>> until this round): >>>>>>>>>>>>>> >>>>>>>>>>>>>> Why do you need the timer and the periodic check? If TXQs >>>>>>>>>>>>>> are >>>>>>>>>>>>>> added >>>>>>>>>>>>>> to >>>>>>>>>>>>>> the remove list during the scheduling run, and >>>>>>>>>>>>>> __ieee80211_check_txqs() >>>>>>>>>>>>>> is run from schedule_end(), isn't that sufficient to clear >>>>>>>>>>>>>> the >>>>>>>>>>>>>> list? >>>>>>>>>>>>> Is it possible that a txq is not added to the remove list >>>>>>>>>>>>> but >>>>>>>>>>>>> then >>>>>>>>>>>>> packets in it are dropped by fq_codel algo? Like the station >>>>>>>>>>>>> disconnects >>>>>>>>>>>>> without any notification. >>>>>>>>>>>> >>>>>>>>>>>> Well as long as all the other cleanup paths call directly >>>>>>>>>>>> into >>>>>>>>>>>> __unschedule_txq(), that should remove stations from the >>>>>>>>>>>> scheduler >>>>>>>>>>>> when >>>>>>>>>>>> they disconnect etc. >>>>>>>>>>> Yes, the disconnect scenario is a bad example. My concern is, >>>>>>>>>>> say, >>>>>>>>>>> we >>>>>>>>>>> have 10 stations and only one of them is assigned a very small >>>>>>>>>>> weight >>>>>>>>>>> compared with that of others. Suppose, after its chance of Tx, >>>>>>>>>>> it >>>>>>>>>>> is >>>>>>>>>>> most likely to be placed in the rightmost(still has some >>>>>>>>>>> packets >>>>>>>>>>> in >>>>>>>>>>> the >>>>>>>>>>> txq) and no more incoming data for it. The remaining packets >>>>>>>>>>> in >>>>>>>>>>> txq >>>>>>>>>>> will >>>>>>>>>>> be dropped due to timeout algo in codel(correct me if I am >>>>>>>>>>> wrong) >>>>>>>>>>> but >>>>>>>>>>> this empty txq will stay on the rbtree until other txqs get >>>>>>>>>>> drained >>>>>>>>>>> or >>>>>>>>>>> global vt catch up with its vt. The staying time could be long >>>>>>>>>>> if >>>>>>>>>>> weight >>>>>>>>>>> is extremely small. Then do we need timer to check or any >>>>>>>>>>> other >>>>>>>>>>> better >>>>>>>>>>> solution? >>>>>>>>>> >>>>>>>>>> Ah, I see what you mean. No, I don't think this will be a >>>>>>>>>> problem; >>>>>>>>>> the >>>>>>>>>> scenario you're describing would play out like this: >>>>>>>>>> >>>>>>>>>> 1. Station ends transmitting, still has a single packet queued, >>>>>>>>>> gets >>>>>>>>>> moved to the end of the rbtree (and stays there for a >>>>>>>>>> while). >>>>>>>>>> >>>>>>>>>> 2. When we finally get to the point where this station gets >>>>>>>>>> another >>>>>>>>>> chance to transmit, the CoDel drop timer triggers and the >>>>>>>>>> last >>>>>>>>>> packet >>>>>>>>>> is dropped[0]. This means that the queue will just be empty >>>>>>>>>> (and ieee80211_tx_dequeue() will return NULL). >>>>>>>>>> >>>>>>>>>> 3. Because the queue is empty, ieee80211_return_txq() will not >>>>>>>>>> put >>>>>>>>>> it >>>>>>>>>> back on the rbtree. >>>>>>>>>> >>>>>>>>>> Crucially, in 2. the CoDel algorithm doesn't kick in until the >>>>>>>>>> point >>>>>>>>>> of >>>>>>>>>> packet dequeue. But even if an empty queue stays on the rbtree >>>>>>>>>> for >>>>>>>>>> a >>>>>>>>>> while, there is no harm in that: eventually it will get its >>>>>>>>>> turn, >>>>>>>>>> it >>>>>>>>>> will turn out to be empty, and just be skipped over. >>>>>>>>> Then that will be fine. Thanks for the explanation of the >>>>>>>>> dropping >>>>>>>>> part >>>>>>>>> in CoDel algorithm. >>>>>>>> >>>>>>>> Yup, think so. And you're welcome :) >>>>>>>> >>>>>>>>>> The issue we need to be concerned about is the opposite: If we >>>>>>>>>> have >>>>>>>>>> a >>>>>>>>>> queue that *does* have packets queued, but which is *not* >>>>>>>>>> scheduled >>>>>>>>>> for >>>>>>>>>> transmission, that will stall TX. >>>>>>>>> Is it by design since its vt is more than global vt, right? The >>>>>>>>> lattency >>>>>>>>> may somehow get impacted though. >>>>>>>> >>>>>>>> Well, it should still stay on the rbtree as long as it has >>>>>>>> packets >>>>>>>> queued. We don't have a check anywhere that reschedules TXQs >>>>>>>> whose >>>>>>>> v_t >>>>>>>> drops below global v_t... >>>>>>>> >>>>>>>>>> [0] CoDel in most cases only drops a single packet at a time, >>>>>>>>>> so >>>>>>>>>> it >>>>>>>>>> will >>>>>>>>>> not clear out an entire queue with multiple packets in one go. >>>>>>>>>> But >>>>>>>>>> you >>>>>>>>>> are right that it could conceivably drop the last packet in a >>>>>>>>>> queue. >>>>>>>>>> >>>>>>>>>>>> We only need to defer removal inside a single "scheduling >>>>>>>>>>>> round" >>>>>>>>>>>> (i.e., >>>>>>>>>>>> between a pair of ieee80211_txq_schedule_start/end. So if we >>>>>>>>>>>> just >>>>>>>>>>>> walk >>>>>>>>>>>> the remove list in schedule_end() we should be enough, no? >>>>>>>>>>>> >>>>>>>>>>>> Hmm, or maybe a simpler way to fix the original issue is just >>>>>>>>>>>> to >>>>>>>>>>>> have >>>>>>>>>>>> unschedule_txq() update the schedule_pos() pointer? >>>>>>>>>>>> >>>>>>>>>>>> I.e., unschedule_txq checks if the txq being removed is >>>>>>>>>>>> currently >>>>>>>>>>>> being >>>>>>>>>>>> pointed to by schedule_pos[ac], and if it is, it updates >>>>>>>>>>>> schedule_pos >>>>>>>>>>>> to >>>>>>>>>>>> be the rb_next of the current value? >>>>>>>>>>> Actually, if schedule_pos is updated to rb_next of the current >>>>>>>>>>> value, >>>>>>>>>>> then in the next_txq() where we are going to use rb_next again >>>>>>>>>>> and >>>>>>>>>>> finally pick the next node of the node we really want. Is it >>>>>>>>>>> fine >>>>>>>>>>> to >>>>>>>>>>> update schedule_pos to NULL? >>>>>>>>>> >>>>>>>>>> Hmm, yeah, good point. >>>>>>>>>> >>>>>>>>>> If we do end up setting schedule_pos to NULL in the middle of a >>>>>>>>>> scheduling round, that will make next_txq() "start over", and >>>>>>>>>> do >>>>>>>>>> another >>>>>>>>>> loop through the whole thing. I guess we may be able hit a case >>>>>>>>>> where >>>>>>>>>> things can oscillate back and forth between addition and >>>>>>>>>> removal >>>>>>>>>> resulting in an infinite loop? Not sure, but at least I can't >>>>>>>>>> seem >>>>>>>>>> to >>>>>>>>>> convince myself that this can't happen. >>>>>>>>> >>>>>>>>> As the loop of next_txq under lock protection as below, >>>>>>>>> >>>>>>>>> txq_schedule_start(); >>>>>>>>> while(txq=next_txq()){ >>>>>>>>> ... >>>>>>>>> return_txq(txq); >>>>>>>>> } >>>>>>>>> txq_schedule_end(); >>>>>>>>> >>>>>>>>> I do not see any chance of addition, no? >>>>>>>> >>>>>>>> As you noted in your other email, Felix reduced the locking. And >>>>>>>> yeah, >>>>>>>> we need to rebase this series to also incorporate that. I figure >>>>>>>> I >>>>>>>> can >>>>>>>> send an updated version of the first patch in the series once >>>>>>>> we've >>>>>>>> worked out the remaining issues with your follow-up patches. >>>>>>>> >>>>>>> Oh, I was thinking we were discussing without locking reduced. >>>>>>> Yes, >>>>>>> I >>>>>>> also agree there might be a case causing infinite loop. With >>>>>>> locking >>>>>>> reduced, the tree can be adjusted between next_txq() and >>>>>>> return_txq() >>>>>>> in >>>>>>> the loop situation. For further discussion, let 's consider, >>>>>>> 1) the tree starts like: >>>>>>> A->B->C->D->E >>>>>>> 2) then next_txq() returns A for dequeuing >>>>>>> 3) driver dequeues A and draines A without any active txq locked >>>>>>> meaning >>>>>>> the tree could be changed upon Tx compeletion. >>>>>>> 4) then in return_txq(), the tree could be, >>>>>>> i A->B->C->D->E （A is empty, and maybe soon be added >>>>>>> back >>>>>>> before the loop end） >>>>>>> ii B->C->A->D->E （A is empty, and maybe soon be added >>>>>>> back >>>>>>> before the loop end） >>>>>>> iii B->C->D->E->A （A is empty, and maybe soon be added >>>>>>> back >>>>>>> before the loop end) >>>>>>> >>>>>>> with this change: >>>>>>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>>>>>> >>>>>>> for case i, local->schedule_pos[ac] is rb_next(A) which is B, and >>>>>>> in >>>>>>> next_txq(), rb_next(B) is what we returns which actually is C and >>>>>>> B >>>>>>> is >>>>>>> skipped, no? >>>>>>> >>>>>>> Similiar for case ii, we skip B, C, D. >>>>>> >>>>>> Yup, I think you're right. But if we can fix this by making >>>>>> ieee80211_resort_txq() aware of the schedule_pos as well, no? I.e., >>>>>> if >>>>>> resort_txq() acts on the txq that's currently in schedule_pos, it >>>>>> will >>>>>> update schedule pos with the same rb_next(node) ?: rb_prev(node); >>>>>> (optionally after checking that the position of the node is >>>>>> actually >>>>>> going to change). >>>>> Sorry, please igore last email sent by mistake. >>>>> >>>>> I don't think it makes any difference with that in unschedule_txq(). >>>>> For >>>>> case i, it finally picks C as well in next_txq(). For next_txq(), >>>>> schedule_pos means previous candidate node whereas with your change, >>>>> it >>>>> looks like schedule_pos is current candidate node instead. >>>> >>>> Hmm, that was not actually what I was thinking, but yeah I think >>>> you're >>>> right that it would be easier to just change it so schedule_pos is >>>> pointing to the next and not the current txq we want to schedule. >>> So do you mean we can change next_txq like this, >>> >>> struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 >>> ac) >>> { >>> struct ieee80211_local *local = hw_to_local(hw); >>> struct rb_node *node = local->schedule_pos[ac]; >>> struct txq_info *txqi = NULL; >>> bool first = false; >>> >>> lockdep_assert_held(&local->active_txq_lock[ac]); >>> >>> if (!node) { >>> node = rb_first_cached(&local->active_txqs[ac]); >>> first = true; >>> - } else >>> - node = rb_next(node); >>> + } >>> + >>> if (!node) >>> return NULL; >> >> Ah, no, now I remember why this didn't work and I went with the other >> approach: If you make this change, you also have to have this at the >> end: >> >> local->schedule_pos[ac] = rb_next(node); >> >> >> But this means we can no longer distinguish between having gone through >> the whole thing (so rb_next() returns NULL), or starting out with >> nothing. >> >> So, instead we need to keep next_txq() the way it is, and just add > > Right, should keep next_txq() the way it is. > >> >> local->schedule_pos[ac] = rb_prev(node); >> >> whenever we remove a node (both in return_txq() and resort_txq()). > > Agree, and also we may need to consider case like A is removed and soon > be added back just the same as ii), > B->C->A->D->E > then B is schedule, removed and soon added back, > C->A->B->D->E > A and B will have a second chance to be scheduled and this may happen to > others as well leading to the infinite loop as you have mentioned > previously, so do we need to maintain a schedule_round like we do in > DRR? Like, > - If the node is in the same round, by pass schedule, go to > rb_next(), either continue loop this round or end this round. > - Increase the schedule_round at the schedule_start() only when the > schedule_pos is NULL. Hmm, yeah, I guess we could end up with a loop like that as well. Keeping the schedule_round would be a way to fix it, but I'm not sure we should just skip that station; maybe we should just end the round instead? >>>> We'd still need a check in resort_txq() then, but it would make it >>>> safe >>>> to unschedule in return_txq()... >>> Yes, agree with that. >>> >>> >>>> >>>>>>> Also I am wondering if there will be some SMP issues relating with >>>>>>> local->schedule_pos[ac]. >>>>>> >>>>>> Not sure what you mean by this? >>>>> My bad. Please ignore this. >>>>> >>>>> >>>>>> >>>>>>>>> In ath10k, we will usually push packets of first txq as many as >>>>>>>>> we >>>>>>>>> can >>>>>>>>> until it is drained and then move to the next one. So if a txq >>>>>>>>> gets >>>>>>>>> removed in the return_txq, it should always be the leftmost. And >>>>>>>>> during this period, neither vt of any station or global vt can >>>>>>>>> be >>>>>>>>> updated due to lock protection. >>>>>>>>> >>>>>>>>>> >>>>>>>>>> But in that case, we could fix it by just conditionally >>>>>>>>>> assigning >>>>>>>>>> either >>>>>>>>>> rb_next or rb_prev to the schedule_pos in unschedule_txq()? >>>>>>>>>> I.e., >>>>>>>>>> something like: >>>>>>>>>> >>>>>>>>>> local->schedule_pos[ac] = rb_next(node) ?: rb_prev(node); >>>>>>>>> I am not sure I am getting your point. Still in next_txq, >>>>>>>>> schedule_pos[ac] will lead us to the next node of the one we >>>>>>>>> want. >>>>>>>> >>>>>>>> The logic in next_txq is different when schedule_pos[ac] is NULL, >>>>>>>> vs >>>>>>>> when rb_next(schedule_pos[ac]) is NULL. The former restarts a new >>>>>>>> scheduling round, while the latter ends the current round. >>>>>>>> >>>>>>>> -Toke >>>>>>> >>>>>>> -- >>>>>>> Yibo >>>>> >>>>> -- >>>>> Yibo >>> >>> -- >>> Yibo > > -- > Yibo
Toke Høiland-Jørgensen <toke@redhat.com> writes: > Yibo Zhao <yiboz@codeaurora.org> writes: > >> On 2019-09-21 22:00, Toke Høiland-Jørgensen wrote: >>> Yibo Zhao <yiboz@codeaurora.org> writes: >>> >>>> On 2019-09-21 21:02, Toke Høiland-Jørgensen wrote: >>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>> >>>>>> On 2019-09-21 19:27, Toke Høiland-Jørgensen wrote: >>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>> >>>>>>>> On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: >>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>> >>>>>>>>>> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>> >>>>>>>>>>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>>>> >>>>>>>>>>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: Guys, PLEASE please consider us poor maintainers drowning in email and edit your quotes :) This style of discussion makes patchwork unusable: https://patchwork.kernel.org/patch/11147019/
Kalle Valo <kvalo@codeaurora.org> writes: > Toke Høiland-Jørgensen <toke@redhat.com> writes: > >> Yibo Zhao <yiboz@codeaurora.org> writes: >> >>> On 2019-09-21 22:00, Toke Høiland-Jørgensen wrote: >>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>> >>>>> On 2019-09-21 21:02, Toke Høiland-Jørgensen wrote: >>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>> >>>>>>> On 2019-09-21 19:27, Toke Høiland-Jørgensen wrote: >>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>> >>>>>>>>> On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: >>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>> >>>>>>>>>>> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>>> >>>>>>>>>>>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: > > Guys, PLEASE please consider us poor maintainers drowning in email and > edit your quotes :) This style of discussion makes patchwork unusable: > > https://patchwork.kernel.org/patch/11147019/ Heh, oops, didn't realise you were following the discussion from patchwork; sorry, will be sure to cut things in the future. The quote marks do make a very nice (reverse) christmas tree, though ;) -Toke
On 2019-09-23 18:47, Toke Høiland-Jørgensen wrote: > Yibo Zhao <yiboz@codeaurora.org> writes: >>> So, instead we need to keep next_txq() the way it is, and just add >> >> Right, should keep next_txq() the way it is. >> >>> >>> local->schedule_pos[ac] = rb_prev(node); >>> >>> whenever we remove a node (both in return_txq() and resort_txq()). >> >> Agree, and also we may need to consider case like A is removed and >> soon >> be added back just the same as ii), >> B->C->A->D->E >> then B is schedule, removed and soon added back, >> C->A->B->D->E >> A and B will have a second chance to be scheduled and this may happen >> to >> others as well leading to the infinite loop as you have mentioned >> previously, so do we need to maintain a schedule_round like we do in >> DRR? Like, >> - If the node is in the same round, by pass schedule, go to >> rb_next(), either continue loop this round or end this round. >> - Increase the schedule_round at the schedule_start() only when >> the >> schedule_pos is NULL. > > Hmm, yeah, I guess we could end up with a loop like that as well. > Keeping the schedule_round would be a way to fix it, but I'm not sure > we > should just skip that station; maybe we should just end the round > instead? I am not sure. I believe, in some cases, the rest of the nodes which could be most of the nodes in the tree will not have the chance to be scheduled in this round. > >>>>> We'd still need a check in resort_txq() then, but it would make it >>>>> safe >>>>> to unschedule in return_txq()... >>>> Yes, agree with that. >>>>
Toke Høiland-Jørgensen <toke@redhat.com> writes: > Kalle Valo <kvalo@codeaurora.org> writes: > >> Toke Høiland-Jørgensen <toke@redhat.com> writes: >> >>> Yibo Zhao <yiboz@codeaurora.org> writes: >>> >>>> On 2019-09-21 22:00, Toke Høiland-Jørgensen wrote: >>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>> >>>>>> On 2019-09-21 21:02, Toke Høiland-Jørgensen wrote: >>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>> >>>>>>>> On 2019-09-21 19:27, Toke Høiland-Jørgensen wrote: >>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>> >>>>>>>>>> On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: >>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>> >>>>>>>>>>>> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>>>> >>>>>>>>>>>>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >> >> Guys, PLEASE please consider us poor maintainers drowning in email and >> edit your quotes :) This style of discussion makes patchwork unusable: >> >> https://patchwork.kernel.org/patch/11147019/ > > Heh, oops, didn't realise you were following the discussion from > patchwork; sorry, will be sure to cut things in the future. To be honest, I'm not sure how much Johannes uses patchwork. But I check everything from patchwork 95% of the time and try to keep my email boxes clean. > The quote marks do make a very nice (reverse) christmas tree, though ;) It did! I had to include that to my rant :)
Kalle Valo <kvalo@codeaurora.org> writes: > Toke Høiland-Jørgensen <toke@redhat.com> writes: > >> Kalle Valo <kvalo@codeaurora.org> writes: >> >>> Toke Høiland-Jørgensen <toke@redhat.com> writes: >>> >>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>> >>>>> On 2019-09-21 22:00, Toke Høiland-Jørgensen wrote: >>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>> >>>>>>> On 2019-09-21 21:02, Toke Høiland-Jørgensen wrote: >>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>> >>>>>>>>> On 2019-09-21 19:27, Toke Høiland-Jørgensen wrote: >>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>> >>>>>>>>>>> On 2019-09-20 17:15, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>>> >>>>>>>>>>>>> On 2019-09-19 18:37, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> On 2019-09-18 19:23, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On 2019-09-18 05:10, Toke Høiland-Jørgensen wrote: >>>>>>>>>>>>>>>>>> Yibo Zhao <yiboz@codeaurora.org> writes: >>> >>> Guys, PLEASE please consider us poor maintainers drowning in email and >>> edit your quotes :) This style of discussion makes patchwork unusable: >>> >>> https://patchwork.kernel.org/patch/11147019/ >> >> Heh, oops, didn't realise you were following the discussion from >> patchwork; sorry, will be sure to cut things in the future. > > To be honest, I'm not sure how much Johannes uses patchwork. But I > check everything from patchwork 95% of the time and try to keep my > email boxes clean. Noted. I'll try to be nice to patchwork, then :) >> The quote marks do make a very nice (reverse) christmas tree, though ;) > > It did! I had to include that to my rant :) :D -Toke
>> Hmm, yeah, I guess we could end up with a loop like that as well. >> Keeping the schedule_round would be a way to fix it, but I'm not sure >> we >> should just skip that station; maybe we should just end the round >> instead? > I am not sure. I believe, in some cases, the rest of the nodes which > could be most of the nodes in the tree will not have the chance to be > scheduled in this round. My guess would be that it doesn't really matter, because in most cases each schedule round will only actually end up queueing packets from one or two stations; as the driver will pull multiple packets from that one station which will often fill up the firmware queues (especially once we start throttling that with the AQL stuff). So I guess we can just skip TXQs that we've already seen this scheduling round, and let the v_t compare determine transmit eligibility :) -Toke
On 2019-09-24 15:26, Toke Høiland-Jørgensen wrote: >>> Hmm, yeah, I guess we could end up with a loop like that as well. >>> Keeping the schedule_round would be a way to fix it, but I'm not sure >>> we >>> should just skip that station; maybe we should just end the round >>> instead? >> I am not sure. I believe, in some cases, the rest of the nodes which >> could be most of the nodes in the tree will not have the chance to be >> scheduled in this round. > > My guess would be that it doesn't really matter, because in most cases > each schedule round will only actually end up queueing packets from one > or two stations; as the driver will pull multiple packets from that one > station which will often fill up the firmware queues (especially once > we > start throttling that with the AQL stuff). > > So I guess we can just skip TXQs that we've already seen this > scheduling > round, and let the v_t compare determine transmit eligibility :) I am a little confused. So do you mean it is fine for you to skip the TXQs we met in this round before and continue the loop until the end or vt comparison failure? > > -Toke
Yibo Zhao <yiboz@codeaurora.org> writes: > On 2019-09-24 15:26, Toke Høiland-Jørgensen wrote: >>>> Hmm, yeah, I guess we could end up with a loop like that as well. >>>> Keeping the schedule_round would be a way to fix it, but I'm not sure >>>> we >>>> should just skip that station; maybe we should just end the round >>>> instead? >>> I am not sure. I believe, in some cases, the rest of the nodes which >>> could be most of the nodes in the tree will not have the chance to be >>> scheduled in this round. >> >> My guess would be that it doesn't really matter, because in most cases >> each schedule round will only actually end up queueing packets from one >> or two stations; as the driver will pull multiple packets from that one >> station which will often fill up the firmware queues (especially once >> we >> start throttling that with the AQL stuff). >> >> So I guess we can just skip TXQs that we've already seen this >> scheduling >> round, and let the v_t compare determine transmit eligibility :) > > I am a little confused. So do you mean it is fine for you to skip the > TXQs we met in this round before and continue the loop until the end or > vt comparison failure? Yeah. In most cases it won't make any difference; but it'll make sure we visit all eligible TXQs in all cases, so we might as well do that if we're tracking the scheduling round anyway. -Toke
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ac2ed8e..ba5a345 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -925,6 +925,8 @@ struct ieee80211_tx_rate { #define IEEE80211_MAX_TX_RETRY 31 +#define IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS 100 + static inline void ieee80211_rate_set_vht(struct ieee80211_tx_rate *rate, u8 mcs, u8 nss) { @@ -6232,7 +6234,8 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, * @ac: AC number to return packets from. * * Should only be called between calls to ieee80211_txq_schedule_start() - * and ieee80211_txq_schedule_end(). + * and ieee80211_txq_schedule_end(). If the txq is empty, it will be added + * to a remove list and get removed later. * Returns the next txq if successful, %NULL if no queue is eligible. If a txq * is returned, it should be returned with ieee80211_return_txq() after the * driver has finished scheduling it. @@ -6268,7 +6271,8 @@ void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac) * @hw: pointer as obtained from ieee80211_alloc_hw() * @ac: AC number to acquire locks for * - * Release locks previously acquired by ieee80211_txq_schedule_end(). + * Release locks previously acquired by ieee80211_txq_schedule_end(). Check + * and remove the empty txq from rb-tree. */ void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) __releases(txq_lock); @@ -6287,6 +6291,14 @@ void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq) __acquires(txq_lock) __releases(txq_lock); /** + * ieee80211_txqs_check - Check txqs waiting for removal + * + * @tmr: pointer as obtained from local + * + */ +void ieee80211_txqs_check(struct timer_list *tmr); + +/** * ieee80211_txq_may_transmit - check whether TXQ is allowed to transmit * * This function is used to check whether given txq is allowed to transmit by diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index a4556f9..49aa143e 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -847,6 +847,7 @@ struct txq_info { struct codel_stats cstats; struct sk_buff_head frags; struct rb_node schedule_order; + struct list_head candidate; unsigned long flags; /* keep last! */ @@ -1145,6 +1146,8 @@ struct ieee80211_local { u64 airtime_v_t[IEEE80211_NUM_ACS]; u64 airtime_weight_sum[IEEE80211_NUM_ACS]; + struct list_head remove_list[IEEE80211_NUM_ACS]; + struct timer_list remove_timer; u16 airtime_flags; const struct ieee80211_ops *ops; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index e9ffa8e..78fe24a 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -667,10 +667,15 @@ struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len, for (i = 0; i < IEEE80211_NUM_ACS; i++) { local->active_txqs[i] = RB_ROOT_CACHED; + INIT_LIST_HEAD(&local->remove_list[i]); spin_lock_init(&local->active_txq_lock[i]); } local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; + timer_setup(&local->remove_timer, ieee80211_txqs_check, 0); + mod_timer(&local->remove_timer, + jiffies + msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); + INIT_LIST_HEAD(&local->chanctx_list); mutex_init(&local->chanctx_mtx); @@ -1305,6 +1310,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) tasklet_kill(&local->tx_pending_tasklet); tasklet_kill(&local->tasklet); + del_timer_sync(&local->remove_timer); #ifdef CONFIG_INET unregister_inetaddr_notifier(&local->ifa_notifier); #endif diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index d00baaa..42ca010 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1450,6 +1450,7 @@ void ieee80211_txq_init(struct ieee80211_sub_if_data *sdata, codel_stats_init(&txqi->cstats); __skb_queue_head_init(&txqi->frags); RB_CLEAR_NODE(&txqi->schedule_order); + INIT_LIST_HEAD(&txqi->candidate); txqi->txq.vif = &sdata->vif; @@ -3724,6 +3725,9 @@ void ieee80211_schedule_txq(struct ieee80211_hw *hw, spin_lock_bh(&local->active_txq_lock[ac]); + if (!list_empty(&txqi->candidate)) + list_del_init(&txqi->candidate); + if (!RB_EMPTY_NODE(&txqi->schedule_order)) goto out; @@ -3783,6 +3787,20 @@ static void __ieee80211_unschedule_txq(struct ieee80211_hw *hw, RB_CLEAR_NODE(&txqi->schedule_order); } +void ieee80211_remove_txq(struct ieee80211_hw *hw, + struct ieee80211_txq *txq) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct txq_info *txqi = to_txq_info(txq); + + lockdep_assert_held(&local->active_txq_lock[txq->ac]); + + if (!RB_EMPTY_NODE(&txqi->schedule_order)) { + __ieee80211_unschedule_txq(hw, txq); + list_del_init(&txqi->candidate); + } +} + void ieee80211_unschedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq) __acquires(txq_lock) __releases(txq_lock) @@ -3790,7 +3808,7 @@ void ieee80211_unschedule_txq(struct ieee80211_hw *hw, struct ieee80211_local *local = hw_to_local(hw); spin_lock_bh(&local->active_txq_lock[txq->ac]); - __ieee80211_unschedule_txq(hw, txq); + ieee80211_remove_txq(hw, txq); spin_unlock_bh(&local->active_txq_lock[txq->ac]); } @@ -3803,11 +3821,48 @@ void ieee80211_return_txq(struct ieee80211_hw *hw, lockdep_assert_held(&local->active_txq_lock[txq->ac]); if (!RB_EMPTY_NODE(&txqi->schedule_order) && - (skb_queue_empty(&txqi->frags) && !txqi->tin.backlog_packets)) - __ieee80211_unschedule_txq(hw, txq); + !txq_has_queue(&txqi->txq) && + list_empty(&txqi->candidate)) + list_add_tail(&txqi->candidate, &local->remove_list[txq->ac]); + } EXPORT_SYMBOL(ieee80211_return_txq); +void __ieee80211_check_txqs(struct ieee80211_local *local, int ac) +{ + struct txq_info *iter, *tmp; + struct sta_info *sta; + + lockdep_assert_held(&local->active_txq_lock[ac]); + + list_for_each_entry_safe(iter, tmp, &local->remove_list[ac], + candidate) { + sta = container_of(iter->txq.sta, struct sta_info, sta); + + if (txq_has_queue(&iter->txq)) + list_del_init(&iter->candidate); + else + ieee80211_remove_txq(&local->hw, &iter->txq); + } +} + +void ieee80211_txqs_check(struct timer_list *t) +{ + struct ieee80211_local *local = from_timer(local, t, remove_timer); + struct txq_info *iter, *tmp; + struct sta_info *sta; + int ac; + + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { + spin_lock_bh(&local->active_txq_lock[ac]); + __ieee80211_check_txqs(local, ac); + spin_unlock_bh(&local->active_txq_lock[ac]); + } + + mod_timer(&local->remove_timer, + jiffies + msecs_to_jiffies(IEEE80211_AIRTIME_TXQ_RM_CHK_INTV_IN_MS)); +} + bool ieee80211_txq_may_transmit(struct ieee80211_hw *hw, struct ieee80211_txq *txq) { @@ -3841,6 +3896,8 @@ void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) struct ieee80211_local *local = hw_to_local(hw); local->schedule_pos[ac] = NULL; + __ieee80211_check_txqs(local, ac); + spin_unlock_bh(&local->active_txq_lock[ac]); } EXPORT_SYMBOL(ieee80211_txq_schedule_end);