diff mbox series

ath11k: Fix single phy hw mode

Message ID 1604511331-22477-1-git-send-email-periyasa@codeaurora.org (mailing list archive)
State Accepted
Commit 9fb13b81e1456c3911b86167470fc05dc9114a07
Delegated to: Kalle Valo
Headers show
Series ath11k: Fix single phy hw mode | expand

Commit Message

Karthikeyan periyasamy Nov. 4, 2020, 5:35 p.m. UTC
driver not able to bootup in the single radio configured board.
single phy hw mode is converted to invalid hw mode and sent to FW
through wmi init cmd. In that case driver is not receiving wmi
ready event which leads to driver bootup fail. single phy hw mode
is a valid for single radio configured board. so removed the
conversion logic.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/wmi.c | 3 ---
 1 file changed, 3 deletions(-)

Comments

Kalle Valo Nov. 7, 2020, 8:04 a.m. UTC | #1
Karthikeyan Periyasamy <periyasa@codeaurora.org> wrote:

> driver not able to bootup in the single radio configured board.
> single phy hw mode is converted to invalid hw mode and sent to FW
> through wmi init cmd. In that case driver is not receiving wmi
> ready event which leads to driver bootup fail. single phy hw mode
> is a valid for single radio configured board. so removed the
> conversion logic.
> 
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
> 
> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

9fb13b81e145 ath11k: Fix single phy hw mode
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 6e17373..1f0c517 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -3351,9 +3351,6 @@  int ath11k_wmi_cmd_init(struct ath11k_base *ab)
 	init_param.hw_mode_id = wmi_sc->preferred_hw_mode;
 	init_param.mem_chunks = wmi_sc->mem_chunks;
 
-	if (wmi_sc->preferred_hw_mode == WMI_HOST_HW_MODE_SINGLE)
-		init_param.hw_mode_id = WMI_HOST_HW_MODE_MAX;
-
 	if (ab->hw_params.needs_band_to_mac) {
 		init_param.num_band_to_mac = ab->num_radios;
 		ath11k_fill_band_to_mac_param(ab, init_param.band_to_mac);