@@ -885,7 +885,8 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
if (!mhi_cntrl || !mhi_cntrl->cntrl_dev || !mhi_cntrl->regs ||
!mhi_cntrl->runtime_get || !mhi_cntrl->runtime_put ||
!mhi_cntrl->status_cb || !mhi_cntrl->read_reg ||
- !mhi_cntrl->write_reg || !mhi_cntrl->nr_irqs || !mhi_cntrl->irq)
+ !mhi_cntrl->write_reg || !mhi_cntrl->nr_irqs ||
+ !mhi_cntrl->irq || !mhi_cntrl->reg_len)
return -EINVAL;
ret = parse_config(mhi_cntrl, config);
@@ -1077,6 +1078,12 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
dev_err(dev, "Error getting BHI offset\n");
goto error_reg_offset;
}
+
+ if (bhi_off >= mhi_cntrl->reg_len) {
+ dev_err(dev, "BHI offset is out of range\n");
+ ret = -EINVAL;
+ goto error_reg_offset;
+ }
mhi_cntrl->bhi = mhi_cntrl->regs + bhi_off;
if (mhi_cntrl->fbc_download || mhi_cntrl->rddm_size) {
@@ -1086,6 +1093,12 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
dev_err(dev, "Error getting BHIE offset\n");
goto error_reg_offset;
}
+
+ if (bhie_off >= mhi_cntrl->reg_len) {
+ dev_err(dev, "BHIe offset is out of range\n");
+ ret = -EINVAL;
+ goto error_reg_offset;
+ }
mhi_cntrl->bhie = mhi_cntrl->regs + bhie_off;
}
When obtaining the BHI or BHIe offsets during the power up preparation phase, range checks are missing. These can help controller drivers avoid accessing any address outside of the MMIO region. Ensure that mhi_cntrl->reg_len is set before MHI registration as it is a required field and range checks will fail without it. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> --- drivers/bus/mhi/core/init.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)