diff mbox series

[v4,1/6] bus: mhi: core: Set BHI/BHIe offsets on power up preparation

Message ID 1620330705-40192-2-git-send-email-bbhatt@codeaurora.org (mailing list archive)
State Not Applicable
Delegated to: Kalle Valo
Headers show
Series BHI/BHIe improvements for MHI power purposes | expand

Commit Message

Bhaumik Bhatt May 6, 2021, 7:51 p.m. UTC 
Set the BHI and/or BHIe offsets in mhi_prepare_for_power_up(),
rearrange the function, and remove the equivalent from
mhi_async_power_up(). This helps consolidate multiple checks
in different parts of the driver and can help MHI fail early on
before power up begins if the offsets are not read correctly.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/bus/mhi/core/init.c | 42 +++++++++++++++++++++++-------------------
 drivers/bus/mhi/core/pm.c   | 28 ++++------------------------
 2 files changed, 27 insertions(+), 43 deletions(-)

Comments

Manivannan Sadhasivam May 21, 2021, 1:36 p.m. UTC | #1 
On Thu, May 06, 2021 at 12:51:40PM -0700, Bhaumik Bhatt wrote:
> Set the BHI and/or BHIe offsets in mhi_prepare_for_power_up(),
> rearrange the function, and remove the equivalent from
> mhi_async_power_up(). This helps consolidate multiple checks
> in different parts of the driver and can help MHI fail early on
> before power up begins if the offsets are not read correctly.
> 
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  drivers/bus/mhi/core/init.c | 42 +++++++++++++++++++++++-------------------
>  drivers/bus/mhi/core/pm.c   | 28 ++++------------------------
>  2 files changed, 27 insertions(+), 43 deletions(-)
> 
> diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
> index c81b377..11c7a3d 100644
> --- a/drivers/bus/mhi/core/init.c
> +++ b/drivers/bus/mhi/core/init.c
> @@ -1063,7 +1063,7 @@ EXPORT_SYMBOL_GPL(mhi_free_controller);
>  int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
>  {
>  	struct device *dev = &mhi_cntrl->mhi_dev->dev;
> -	u32 bhie_off;
> +	u32 bhi_off, bhie_off;
>  	int ret;
>  
>  	mutex_lock(&mhi_cntrl->pm_mutex);
> @@ -1072,29 +1072,36 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
>  	if (ret)
>  		goto error_dev_ctxt;
>  
> -	/*
> -	 * Allocate RDDM table if specified, this table is for debugging purpose
> -	 */
> -	if (mhi_cntrl->rddm_size) {
> -		mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->rddm_image,
> -				     mhi_cntrl->rddm_size);
> +	ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIOFF, &bhi_off);
> +	if (ret) {
> +		dev_err(dev, "Error getting BHI offset\n");
> +		goto error_reg_offset;
> +	}
> +	mhi_cntrl->bhi = mhi_cntrl->regs + bhi_off;
>  
> -		/*
> -		 * This controller supports RDDM, so we need to manually clear
> -		 * BHIE RX registers since POR values are undefined.
> -		 */
> +	if (mhi_cntrl->fbc_download || mhi_cntrl->rddm_size) {
>  		ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIEOFF,
>  				   &bhie_off);
>  		if (ret) {
>  			dev_err(dev, "Error getting BHIE offset\n");
> -			goto bhie_error;
> +			goto error_reg_offset;
>  		}
> -
>  		mhi_cntrl->bhie = mhi_cntrl->regs + bhie_off;
> +	}
> +
> +	if (mhi_cntrl->rddm_size) {
> +		/*
> +		 * This controller supports RDDM, so we need to manually clear
> +		 * BHIE RX registers since POR values are undefined.
> +		 */
>  		memset_io(mhi_cntrl->bhie + BHIE_RXVECADDR_LOW_OFFS,
>  			  0, BHIE_RXVECSTATUS_OFFS - BHIE_RXVECADDR_LOW_OFFS +
>  			  4);
> -
> +		/*
> +		 * Allocate RDDM table for debugging purpose if specified
> +		 */
> +		mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->rddm_image,
> +				     mhi_cntrl->rddm_size);
>  		if (mhi_cntrl->rddm_image)
>  			mhi_rddm_prepare(mhi_cntrl, mhi_cntrl->rddm_image);
>  	}
> @@ -1103,11 +1110,8 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
>  
>  	return 0;
>  
> -bhie_error:
> -	if (mhi_cntrl->rddm_image) {
> -		mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->rddm_image);
> -		mhi_cntrl->rddm_image = NULL;
> -	}
> +error_reg_offset:
> +	mhi_deinit_dev_ctxt(mhi_cntrl);
>  
>  error_dev_ctxt:
>  	mutex_unlock(&mhi_cntrl->pm_mutex);
> diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
> index e2e59a3..adf426c 100644
> --- a/drivers/bus/mhi/core/pm.c
> +++ b/drivers/bus/mhi/core/pm.c
> @@ -1066,28 +1066,8 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
>  	if (ret)
>  		goto error_setup_irq;
>  
> -	/* Setup BHI offset & INTVEC */
> +	/* Setup BHI INTVEC */
>  	write_lock_irq(&mhi_cntrl->pm_lock);
> -	ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIOFF, &val);
> -	if (ret) {
> -		write_unlock_irq(&mhi_cntrl->pm_lock);
> -		goto error_bhi_offset;
> -	}
> -
> -	mhi_cntrl->bhi = mhi_cntrl->regs + val;
> -
> -	/* Setup BHIE offset */
> -	if (mhi_cntrl->fbc_download) {
> -		ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIEOFF, &val);
> -		if (ret) {
> -			write_unlock_irq(&mhi_cntrl->pm_lock);
> -			dev_err(dev, "Error reading BHIE offset\n");
> -			goto error_bhi_offset;
> -		}
> -
> -		mhi_cntrl->bhie = mhi_cntrl->regs + val;
> -	}
> -
>  	mhi_write_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_INTVEC, 0);
>  	mhi_cntrl->pm_state = MHI_PM_POR;
>  	mhi_cntrl->ee = MHI_EE_MAX;
> @@ -1098,7 +1078,7 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
>  	if (!MHI_IN_PBL(current_ee) && current_ee != MHI_EE_AMSS) {
>  		dev_err(dev, "Not a valid EE for power on\n");
>  		ret = -EIO;
> -		goto error_bhi_offset;
> +		goto error_async_power_up;
>  	}
>  
>  	state = mhi_get_mhi_state(mhi_cntrl);
> @@ -1117,7 +1097,7 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
>  		if (!ret) {
>  			ret = -EIO;
>  			dev_info(dev, "Failed to reset MHI due to syserr state\n");
> -			goto error_bhi_offset;
> +			goto error_async_power_up;
>  		}
>  
>  		/*
> @@ -1139,7 +1119,7 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
>  
>  	return 0;
>  
> -error_bhi_offset:
> +error_async_power_up:
>  	mhi_deinit_free_irq(mhi_cntrl);
>  
>  error_setup_irq:
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
diff mbox series

Patch

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index c81b377..11c7a3d 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -1063,7 +1063,7 @@  EXPORT_SYMBOL_GPL(mhi_free_controller);
 int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
 {
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
-	u32 bhie_off;
+	u32 bhi_off, bhie_off;
 	int ret;
 
 	mutex_lock(&mhi_cntrl->pm_mutex);
@@ -1072,29 +1072,36 @@  int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
 	if (ret)
 		goto error_dev_ctxt;
 
-	/*
-	 * Allocate RDDM table if specified, this table is for debugging purpose
-	 */
-	if (mhi_cntrl->rddm_size) {
-		mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->rddm_image,
-				     mhi_cntrl->rddm_size);
+	ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIOFF, &bhi_off);
+	if (ret) {
+		dev_err(dev, "Error getting BHI offset\n");
+		goto error_reg_offset;
+	}
+	mhi_cntrl->bhi = mhi_cntrl->regs + bhi_off;
 
-		/*
-		 * This controller supports RDDM, so we need to manually clear
-		 * BHIE RX registers since POR values are undefined.
-		 */
+	if (mhi_cntrl->fbc_download || mhi_cntrl->rddm_size) {
 		ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIEOFF,
 				   &bhie_off);
 		if (ret) {
 			dev_err(dev, "Error getting BHIE offset\n");
-			goto bhie_error;
+			goto error_reg_offset;
 		}
-
 		mhi_cntrl->bhie = mhi_cntrl->regs + bhie_off;
+	}
+
+	if (mhi_cntrl->rddm_size) {
+		/*
+		 * This controller supports RDDM, so we need to manually clear
+		 * BHIE RX registers since POR values are undefined.
+		 */
 		memset_io(mhi_cntrl->bhie + BHIE_RXVECADDR_LOW_OFFS,
 			  0, BHIE_RXVECSTATUS_OFFS - BHIE_RXVECADDR_LOW_OFFS +
 			  4);
-
+		/*
+		 * Allocate RDDM table for debugging purpose if specified
+		 */
+		mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->rddm_image,
+				     mhi_cntrl->rddm_size);
 		if (mhi_cntrl->rddm_image)
 			mhi_rddm_prepare(mhi_cntrl, mhi_cntrl->rddm_image);
 	}
@@ -1103,11 +1110,8 @@  int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
 
 	return 0;
 
-bhie_error:
-	if (mhi_cntrl->rddm_image) {
-		mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->rddm_image);
-		mhi_cntrl->rddm_image = NULL;
-	}
+error_reg_offset:
+	mhi_deinit_dev_ctxt(mhi_cntrl);
 
 error_dev_ctxt:
 	mutex_unlock(&mhi_cntrl->pm_mutex);
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index e2e59a3..adf426c 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -1066,28 +1066,8 @@  int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 	if (ret)
 		goto error_setup_irq;
 
-	/* Setup BHI offset & INTVEC */
+	/* Setup BHI INTVEC */
 	write_lock_irq(&mhi_cntrl->pm_lock);
-	ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIOFF, &val);
-	if (ret) {
-		write_unlock_irq(&mhi_cntrl->pm_lock);
-		goto error_bhi_offset;
-	}
-
-	mhi_cntrl->bhi = mhi_cntrl->regs + val;
-
-	/* Setup BHIE offset */
-	if (mhi_cntrl->fbc_download) {
-		ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, BHIEOFF, &val);
-		if (ret) {
-			write_unlock_irq(&mhi_cntrl->pm_lock);
-			dev_err(dev, "Error reading BHIE offset\n");
-			goto error_bhi_offset;
-		}
-
-		mhi_cntrl->bhie = mhi_cntrl->regs + val;
-	}
-
 	mhi_write_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_INTVEC, 0);
 	mhi_cntrl->pm_state = MHI_PM_POR;
 	mhi_cntrl->ee = MHI_EE_MAX;
@@ -1098,7 +1078,7 @@  int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 	if (!MHI_IN_PBL(current_ee) && current_ee != MHI_EE_AMSS) {
 		dev_err(dev, "Not a valid EE for power on\n");
 		ret = -EIO;
-		goto error_bhi_offset;
+		goto error_async_power_up;
 	}
 
 	state = mhi_get_mhi_state(mhi_cntrl);
@@ -1117,7 +1097,7 @@  int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 		if (!ret) {
 			ret = -EIO;
 			dev_info(dev, "Failed to reset MHI due to syserr state\n");
-			goto error_bhi_offset;
+			goto error_async_power_up;
 		}
 
 		/*
@@ -1139,7 +1119,7 @@  int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
 
 	return 0;
 
-error_bhi_offset:
+error_async_power_up:
 	mhi_deinit_free_irq(mhi_cntrl);
 
 error_setup_irq: