===================================================================
@@ -716,139 +716,6 @@ static void rt2500usb_reset_tuner(struct
}
/*
- * NOTE: This function is directly ported from legacy driver, but
- * despite it being declared it was never called. Although link tuning
- * sounds like a good idea, and usually works well for the other drivers,
- * it does _not_ work with rt2500usb. Enabling this function will result
- * in TX capabilities only until association kicks in. Immediately
- * after the successful association all TX frames will be kept in the
- * hardware queue and never transmitted.
- */
-#if 0
-static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
-{
- int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
- u16 bbp_thresh;
- u16 vgc_bound;
- u16 sens;
- u16 r24;
- u16 r25;
- u16 r61;
- u16 r17_sens;
- u8 r17;
- u8 up_bound;
- u8 low_bound;
-
- /*
- * Read current r17 value, as well as the sensitivity values
- * for the r17 register.
- */
- rt2500usb_bbp_read(rt2x00dev, 17, &r17);
- rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens);
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound);
- up_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER);
- low_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCLOWER);
-
- /*
- * If we are not associated, we should go straight to the
- * dynamic CCA tuning.
- */
- if (!rt2x00dev->intf_associated)
- goto dynamic_cca_tune;
-
- /*
- * Determine the BBP tuning threshold and correctly
- * set BBP 24, 25 and 61.
- */
- rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh);
- bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD);
-
- rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24);
- rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25);
- rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61);
-
- if ((rssi + bbp_thresh) > 0) {
- r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH);
- r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH);
- r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH);
- } else {
- r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW);
- r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW);
- r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW);
- }
-
- rt2500usb_bbp_write(rt2x00dev, 24, r24);
- rt2500usb_bbp_write(rt2x00dev, 25, r25);
- rt2500usb_bbp_write(rt2x00dev, 61, r61);
-
- /*
- * A too low RSSI will cause too much false CCA which will
- * then corrupt the R17 tuning. To remidy this the tuning should
- * be stopped (While making sure the R17 value will not exceed limits)
- */
- if (rssi >= -40) {
- if (r17 != 0x60)
- rt2500usb_bbp_write(rt2x00dev, 17, 0x60);
- return;
- }
-
- /*
- * Special big-R17 for short distance
- */
- if (rssi >= -58) {
- sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW);
- if (r17 != sens)
- rt2500usb_bbp_write(rt2x00dev, 17, sens);
- return;
- }
-
- /*
- * Special mid-R17 for middle distance
- */
- if (rssi >= -74) {
- sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH);
- if (r17 != sens)
- rt2500usb_bbp_write(rt2x00dev, 17, sens);
- return;
- }
-
- /*
- * Leave short or middle distance condition, restore r17
- * to the dynamic tuning range.
- */
- low_bound = 0x32;
- if (rssi < -77)
- up_bound -= (-77 - rssi);
-
- if (up_bound < low_bound)
- up_bound = low_bound;
-
- if (r17 > up_bound) {
- rt2500usb_bbp_write(rt2x00dev, 17, up_bound);
- rt2x00dev->link.vgc_level = up_bound;
- return;
- }
-
-dynamic_cca_tune:
-
- /*
- * R17 is inside the dynamic tuning range,
- * start tuning the link based on the false cca counter.
- */
- if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) {
- rt2500usb_bbp_write(rt2x00dev, 17, ++r17);
- rt2x00dev->link.vgc_level = r17;
- } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) {
- rt2500usb_bbp_write(rt2x00dev, 17, --r17);
- rt2x00dev->link.vgc_level = r17;
- }
-}
-#else
-#define rt2500usb_link_tuner NULL
-#endif
-
-/*
* Initialization functions.
*/
static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
@@ -1910,7 +1777,6 @@ static const struct rt2x00lib_ops rt2500
.rfkill_poll = rt2500usb_rfkill_poll,
.link_stats = rt2500usb_link_stats,
.reset_tuner = rt2500usb_reset_tuner,
- .link_tuner = rt2500usb_link_tuner,
.write_tx_desc = rt2500usb_write_tx_desc,
.write_tx_data = rt2x00usb_write_tx_data,
.write_beacon = rt2500usb_write_beacon,