===================================================================
@@ -247,34 +247,25 @@ static void ath_pci_remove(struct pci_de
#ifdef CONFIG_PM
-static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int ath_pci_suspend(struct device *device)
{
+ struct pci_dev *pdev = to_pci_dev(device);
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
return 0;
}
-static int ath_pci_resume(struct pci_dev *pdev)
+static int ath_pci_resume(struct device *device)
{
+ struct pci_dev *pdev = to_pci_dev(device);
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
u32 val;
- int err;
-
- pci_restore_state(pdev);
-
- err = pci_enable_device(pdev);
- if (err)
- return err;
/*
* Suspend/Resume resets the PCI configuration space, so we have to
@@ -293,7 +284,23 @@ static int ath_pci_resume(struct pci_dev
return 0;
}
-#endif /* CONFIG_PM */
+static const struct dev_pm_ops ath9k_pm_ops = {
+ .suspend = ath_pci_suspend,
+ .resume = ath_pci_resume,
+ .freeze = ath_pci_suspend,
+ .thaw = ath_pci_resume,
+ .poweroff = ath_pci_suspend,
+ .restore = ath_pci_resume,
+};
+
+#define ATH9K_PM_OPS (&ath9k_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define ATH9K_PM_OPS NULL
+
+#endif /* !CONFIG_PM */
+
MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
@@ -302,10 +309,7 @@ static struct pci_driver ath_pci_driver
.id_table = ath_pci_id_table,
.probe = ath_pci_probe,
.remove = ath_pci_remove,
-#ifdef CONFIG_PM
- .suspend = ath_pci_suspend,
- .resume = ath_pci_resume,
-#endif /* CONFIG_PM */
+ .driver.pm = ATH9K_PM_OPS,
};
int ath_pci_init(void)