new file mode 100644
@@ -0,0 +1,273 @@
+/*
+ * mac80211 <-> driver interface
+ *
+ * Copyright 2002-2005, Devicescape Software, Inc.
+ * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
+ * Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2011 Kalle Valo <kvalo@adurom.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MAC80211_COMPAT_H
+#define MAC80211_COMPAT_H
+
+#define ieee80211_max_queues mac80211_max_queues
+#define IEEE80211_MAX_QUEUES MAC80211_MAX_QUEUES
+
+#define ieee80211_ac_numbers mac80211_ac_numbers
+#define IEEE80211_AC_VO MAC80211_AC_VO
+#define IEEE80211_AC_VI MAC80211_AC_VI
+#define IEEE80211_AC_BE MAC80211_AC_BE
+#define IEEE80211_AC_BK MAC80211_AC_BK
+
+#define ieee80211_tx_queue_params mac80211_tx_queue_params
+
+#define ieee80211_low_level_stats mac80211_low_level_stats
+
+#define ieee80211_bss_change mac80211_bss_change
+
+#define IEEE80211_BSS_ARP_ADDR_LIST_LEN MAC80211_BSS_ARP_ADDR_LIST_LEN
+
+#define ieee80211_bss_conf mac80211_bss_conf
+
+#define IEEE80211_TX_CTL_REQ_TX_STATUS MAC80211_TX_CTL_REQ_TX_STATUS
+#define IEEE80211_TX_CTL_ASSIGN_SEQ MAC80211_TX_CTL_ASSIGN_SEQ
+#define IEEE80211_TX_CTL_NO_ACK MAC80211_TX_CTL_NO_ACK
+#define IEEE80211_TX_CTL_CLEAR_PS_FILT MAC80211_TX_CTL_CLEAR_PS_FILT
+#define IEEE80211_TX_CTL_FIRST_FRAGMENT MAC80211_TX_CTL_FIRST_FRAGMENT
+#define IEEE80211_TX_CTL_SEND_AFTER_DTIM MAC80211_TX_CTL_SEND_AFTER_DTIM
+#define IEEE80211_TX_CTL_AMPDU MAC80211_TX_CTL_AMPDU
+#define IEEE80211_TX_CTL_INJECTED MAC80211_TX_CTL_INJECTED
+#define IEEE80211_TX_STAT_TX_FILTERED MAC80211_TX_STAT_TX_FILTERED
+#define IEEE80211_TX_STAT_ACK MAC80211_TX_STAT_ACK
+#define IEEE80211_TX_STAT_AMPDU MAC80211_TX_STAT_AMPDU
+#define IEEE80211_TX_STAT_AMPDU_NO_BACK MAC80211_TX_STAT_AMPDU_NO_BACK
+#define IEEE80211_TX_CTL_RATE_CTRL_PROBE MAC80211_TX_CTL_RATE_CTRL_PROBE
+#define IEEE80211_TX_INTFL_NEED_TXPROCESSING MAC80211_TX_INTFL_NEED_TXPROCESSING
+#define IEEE80211_TX_INTFL_RETRIED MAC80211_TX_INTFL_RETRIED
+#define IEEE80211_TX_INTFL_DONT_ENCRYPT MAC80211_TX_INTFL_DONT_ENCRYPT
+#define IEEE80211_TX_CTL_PSPOLL_RESPONSE MAC80211_TX_CTL_PSPOLL_RESPONSE
+#define IEEE80211_TX_CTL_MORE_FRAMES MAC80211_TX_CTL_MORE_FRAMES
+#define IEEE80211_TX_INTFL_RETRANSMISSION MAC80211_TX_INTFL_RETRANSMISSION
+#define IEEE80211_TX_INTFL_HAS_RADIOTAP MAC80211_TX_INTFL_HAS_RADIOTAP
+#define IEEE80211_TX_INTFL_NL80211_FRAME_TX MAC80211_TX_INTFL_NL80211_FRAME_TX
+#define IEEE80211_TX_CTL_LDPC MAC80211_TX_CTL_LDPC
+#define IEEE80211_TX_CTL_STBC MAC80211_TX_CTL_STBC
+#define IEEE80211_TX_CTL_TX_OFFCHAN MAC80211_TX_CTL_TX_OFFCHAN
+#define IEEE80211_TX_INTFL_TKIP_MIC_FAILURE MAC80211_TX_INTFL_TKIP_MIC_FAILURE
+
+#define IEEE80211_TX_CTL_STBC_SHIFT MAC80211_TX_CTL_STBC_SHIFT
+
+#define IEEE80211_TX_TEMPORARY_FLAGS MAC80211_TX_TEMPORARY_FLAGS
+
+#define IEEE80211_TX_RC_USE_RTS_CTS MAC80211_TX_RC_USE_RTS_CTS
+#define IEEE80211_TX_RC_USE_CTS_PROTECT MAC80211_TX_RC_USE_CTS_PROTECT
+#define IEEE80211_TX_RC_USE_SHORT_PREAMBLE MAC80211_TX_RC_USE_SHORT_PREAMBLE
+#define IEEE80211_TX_RC_MCS MAC80211_TX_RC_MCS
+#define IEEE80211_TX_RC_GREEN_FIELD MAC80211_TX_RC_GREEN_FIELD
+#define IEEE80211_TX_RC_40_MHZ_WIDTH MAC80211_TX_RC_40_MHZ_WIDTH
+#define IEEE80211_TX_RC_DUP_DATA MAC80211_TX_RC_DUP_DATA
+#define IEEE80211_TX_RC_SHORT_GI MAC80211_TX_RC_SHORT_GI
+
+#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE MAC80211_TX_INFO_DRIVER_DATA_SIZE
+#define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE MAC80211_TX_INFO_RATE_DRIVER_DATA_SIZE
+#define IEEE80211_TX_MAX_RATES MAC80211_TX_MAX_RATES
+
+#define ieee80211_tx_rate mac80211_tx_rate
+#define ieee80211_tx_info mac80211_tx_info
+
+#define ieee80211_tx_info mac80211_tx_info
+#define ieee80211_rx_status mac80211_rx_status
+
+#define ieee80211_sched_scan_ies mac80211_sched_scan_ies
+
+#define IEEE80211_SKB_CB MAC80211_SKB_CB
+
+#define IEEE80211_SKB_RXCB MAC80211_SKB_RXCB
+
+#define ieee80211_tx_info_clear_status mac80211_tx_info_clear_status
+
+#define ieee80211_rx_status mac80211_rx_status
+
+#define ieee80211_conf_flags mac80211_conf_flags
+
+#define IEEE80211_CONF_MONITOR MAC80211_CONF_MONITOR
+#define IEEE80211_CONF_PS MAC80211_CONF_PS
+#define IEEE80211_CONF_IDLE MAC80211_CONF_IDLE
+#define IEEE80211_CONF_OFFCHANNEL MAC80211_CONF_OFFCHANNEL
+
+#define ieee80211_conf_changed mac80211_conf_changed
+
+#define IEEE80211_CONF_CHANGE_SMPS MAC80211_CONF_CHANGE_SMPS
+#define IEEE80211_CONF_CHANGE_LISTEN_INTERVAL MAC80211_CONF_CHANGE_LISTEN_INTERVAL
+#define IEEE80211_CONF_CHANGE_MONITOR MAC80211_CONF_CHANGE_MONITOR
+#define IEEE80211_CONF_CHANGE_PS MAC80211_CONF_CHANGE_PS
+#define IEEE80211_CONF_CHANGE_POWER MAC80211_CONF_CHANGE_POWER
+#define IEEE80211_CONF_CHANGE_CHANNEL MAC80211_CONF_CHANGE_CHANNEL
+#define IEEE80211_CONF_CHANGE_RETRY_LIMITS MAC80211_CONF_CHANGE_RETRY_LIMITS
+#define IEEE80211_CONF_CHANGE_IDLE MAC80211_CONF_CHANGE_IDLE
+
+#define ieee80211_smps_mode mac80211_smps_mode
+#define IEEE80211_SMPS_AUTOMATIC MAC80211_SMPS_AUTOMATIC
+#define IEEE80211_SMPS_OFF MAC80211_SMPS_OFF
+#define IEEE80211_SMPS_STATIC MAC80211_SMPS_STATIC
+#define IEEE80211_SMPS_DYNAMIC MAC80211_SMPS_DYNAMIC
+#define IEEE80211_SMPS_NUM_MODES MAC80211_SMPS_NUM_MODES
+
+#define ieee80211_conf mac80211_conf
+#define ieee80211_channel_switch mac80211_channel_switch
+#define ieee80211_vif mac80211_vif
+#define ieee80211_vif_is_mesh mac80211_vif_is_mesh
+
+#define ieee80211_key_flags mac80211_key_flags
+#define IEEE80211_KEY_FLAG_WMM_STA MAC80211_KEY_FLAG_WMM_STA
+#define IEEE80211_KEY_FLAG_GENERATE_IV MAC80211_KEY_FLAG_GENERATE_IV
+#define IEEE80211_KEY_FLAG_GENERATE_MMIC MAC80211_KEY_FLAG_GENERATE_MMIC
+#define IEEE80211_KEY_FLAG_PAIRWISE MAC80211_KEY_FLAG_PAIRWISE
+#define IEEE80211_KEY_FLAG_SW_MGMT MAC80211_KEY_FLAG_SW_MGMT
+
+#define ieee80211_key_conf mac80211_key_conf
+#define ieee80211_sta mac80211_sta
+
+#define ieee80211_tkip_key_type mac80211_tkip_key_type
+#define IEEE80211_TKIP_P1_KEY MAC80211_TKIP_P1_KEY
+#define IEEE80211_TKIP_P2_KEY MAC80211_TKIP_P2_KEY
+
+#define ieee80211_hw_flags mac80211_hw_flags
+
+#define IEEE80211_HW_HAS_RATE_CONTROL MAC80211_HW_HAS_RATE_CONTROL
+#define IEEE80211_HW_RX_INCLUDES_FCS MAC80211_HW_RX_INCLUDES_FCS
+#define IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING MAC80211_HW_HOST_BROADCAST_PS_BUFFERING
+#define IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE MAC80211_HW_2GHZ_SHORT_SLOT_INCAPABLE
+#define IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE MAC80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE
+#define IEEE80211_HW_SIGNAL_UNSPEC MAC80211_HW_SIGNAL_UNSPEC
+#define IEEE80211_HW_SIGNAL_DBM MAC80211_HW_SIGNAL_DBM
+#define IEEE80211_HW_NEED_DTIM_PERIOD MAC80211_HW_NEED_DTIM_PERIOD
+#define IEEE80211_HW_SPECTRUM_MGMT MAC80211_HW_SPECTRUM_MGMT
+#define IEEE80211_HW_AMPDU_AGGREGATION MAC80211_HW_AMPDU_AGGREGATION
+#define IEEE80211_HW_SUPPORTS_PS MAC80211_HW_SUPPORTS_PS
+#define IEEE80211_HW_PS_NULLFUNC_STACK MAC80211_HW_PS_NULLFUNC_STACK
+#define IEEE80211_HW_SUPPORTS_DYNAMIC_PS MAC80211_HW_SUPPORTS_DYNAMIC_PS
+#define IEEE80211_HW_MFP_CAPABLE MAC80211_HW_MFP_CAPABLE
+#define IEEE80211_HW_BEACON_FILTER MAC80211_HW_BEACON_FILTER
+#define IEEE80211_HW_SUPPORTS_STATIC_SMPS MAC80211_HW_SUPPORTS_STATIC_SMPS
+#define IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS MAC80211_HW_SUPPORTS_DYNAMIC_SMPS
+#define IEEE80211_HW_SUPPORTS_UAPSD MAC80211_HW_SUPPORTS_UAPSD
+#define IEEE80211_HW_REPORTS_TX_ACK_STATUS MAC80211_HW_REPORTS_TX_ACK_STATUS
+#define IEEE80211_HW_CONNECTION_MONITOR MAC80211_HW_CONNECTION_MONITOR
+#define IEEE80211_HW_SUPPORTS_CQM_RSSI MAC80211_HW_SUPPORTS_CQM_RSSI
+#define IEEE80211_HW_SUPPORTS_PER_STA_GTK MAC80211_HW_SUPPORTS_PER_STA_GTK
+#define IEEE80211_HW_AP_LINK_PS MAC80211_HW_AP_LINK_PS
+
+#define ieee80211_hw mac80211_hw
+#define wiphy_to_ieee80211_hw wiphy_to_mac80211_hw
+#define SET_IEEE80211_DEV SET_MAC80211_DEV
+#define SET_IEEE80211_PERM_ADDR SET_MAC80211_PERM_ADDR
+
+#define ieee80211_get_tx_rate mac80211_get_tx_rate
+#define ieee80211_get_rts_cts_rate mac80211_get_rts_cts_rate
+#define ieee80211_get_alt_retry_rate mac80211_get_alt_retry_rate
+
+#define ieee80211_filter_flags mac80211_filter_flags
+
+#define ieee80211_ampdu_mlme_action mac80211_ampdu_mlme_action
+#define IEEE80211_AMPDU_RX_START MAC80211_AMPDU_RX_START
+#define IEEE80211_AMPDU_RX_STOP MAC80211_AMPDU_RX_STOP
+#define IEEE80211_AMPDU_TX_START MAC80211_AMPDU_TX_START
+#define IEEE80211_AMPDU_TX_STOP MAC80211_AMPDU_TX_STOP
+#define IEEE80211_AMPDU_TX_OPERATIONAL MAC80211_AMPDU_TX_OPERATIONAL
+
+#define ieee80211_ops mac80211_ops
+#define ieee80211_alloc_hw mac80211_alloc_hw
+#define ieee80211_register_hw mac80211_register_hw
+#define ieee80211_tpt_blink mac80211_tpt_blink
+
+#define ieee80211_tpt_led_trigger_flags mac80211_tpt_led_trigger_flags
+#define IEEE80211_TPT_LEDTRIG_FL_RADIO MAC80211_TPT_LEDTRIG_FL_RADIO
+#define IEEE80211_TPT_LEDTRIG_FL_WORK MAC80211_TPT_LEDTRIG_FL_WORK
+#define IEEE80211_TPT_LEDTRIG_FL_CONNECTED MAC80211_TPT_LEDTRIG_FL_CONNECTED
+
+#define __ieee80211_get_tx_led_name __mac80211_get_tx_led_name
+#define __ieee80211_get_rx_led_name __mac80211_get_rx_led_name
+#define __ieee80211_get_assoc_led_name __mac80211_get_assoc_led_name
+#define __ieee80211_get_radio_led_name __mac80211_get_radio_led_name
+#define __ieee80211_create_tpt_led_trigger __mac80211_create_tpt_led_trigger
+
+#define ieee80211_get_tx_led_name mac80211_get_tx_led_name
+#define ieee80211_get_rx_led_name mac80211_get_rx_led_name
+#define ieee80211_get_assoc_led_name mac80211_get_assoc_led_name
+#define ieee80211_get_radio_led_name mac80211_get_radio_led_name
+#define ieee80211_create_tpt_led_trigger mac80211_create_tpt_led_trigger
+#define ieee80211_unregister_hw mac80211_unregister_hw
+#define ieee80211_free_hw mac80211_free_hw
+#define ieee80211_restart_hw mac80211_restart_hw
+#define ieee80211_napi_schedule mac80211_napi_schedule
+#define ieee80211_napi_complete mac80211_napi_complete
+#define ieee80211_rx mac80211_rx
+#define ieee80211_rx_irqsafe mac80211_rx_irqsafe
+#define ieee80211_rx_ni mac80211_rx_ni
+#define ieee80211_sta_ps_transition mac80211_sta_ps_transition
+#define ieee80211_sta_ps_transition_ni mac80211_sta_ps_transition_ni
+#define IEEE80211_TX_STATUS_HEADROOM MAC80211_TX_STATUS_HEADROOM
+#define ieee80211_sta_set_tim mac80211_sta_set_tim
+#define ieee80211_tx_status mac80211_tx_status
+#define ieee80211_tx_status_ni mac80211_tx_status_ni
+#define ieee80211_tx_status_irqsafe mac80211_tx_status_irqsafe
+#define ieee80211_report_low_ack mac80211_report_low_ack
+#define ieee80211_beacon_get_tim mac80211_beacon_get_tim
+#define ieee80211_beacon_get mac80211_beacon_get
+#define ieee80211_pspoll_get mac80211_pspoll_get
+#define ieee80211_nullfunc_get mac80211_nullfunc_get
+#define ieee80211_probereq_get mac80211_probereq_get
+#define ieee80211_rts_get mac80211_rts_get
+#define ieee80211_rts_duration mac80211_rts_duration
+#define ieee80211_ctstoself_get mac80211_ctstoself_get
+#define ieee80211_ctstoself_duration mac80211_ctstoself_duration
+#define ieee80211_generic_frame_duration mac80211_generic_frame_duration
+#define ieee80211_get_buffered_bc mac80211_get_buffered_bc
+#define ieee80211_get_tkip_key mac80211_get_tkip_key
+#define ieee80211_wake_queue mac80211_wake_queue
+#define ieee80211_stop_queue mac80211_stop_queue
+#define ieee80211_queue_stopped mac80211_queue_stopped
+#define ieee80211_stop_queues mac80211_stop_queues
+#define ieee80211_wake_queues mac80211_wake_queues
+#define ieee80211_scan_completed mac80211_scan_completed
+#define ieee80211_sched_scan_results mac80211_sched_scan_results
+#define ieee80211_sched_scan_stopped mac80211_sched_scan_stopped
+#define ieee80211_iterate_active_interfaces mac80211_iterate_active_interfaces
+#define ieee80211_iterate_active_interfaces_atomic mac80211_iterate_active_interfaces_atomic
+#define ieee80211_queue_work mac80211_queue_work
+#define ieee80211_queue_delayed_work mac80211_queue_delayed_work
+#define ieee80211_start_tx_ba_session mac80211_start_tx_ba_session
+#define ieee80211_start_tx_ba_cb_irqsafe mac80211_start_tx_ba_cb_irqsafe
+#define ieee80211_stop_tx_ba_session mac80211_stop_tx_ba_session
+#define ieee80211_stop_tx_ba_cb_irqsafe mac80211_stop_tx_ba_cb_irqsafe
+#define ieee80211_find_sta mac80211_find_sta
+#define ieee80211_find_sta_by_ifaddr mac80211_find_sta_by_ifaddr
+#define ieee80211_sta_block_awake mac80211_sta_block_awake
+#define ieee80211_ap_probereq_get mac80211_ap_probereq_get
+#define ieee80211_beacon_loss mac80211_beacon_loss
+#define ieee80211_connection_loss mac80211_connection_loss
+#define ieee80211_disable_dyn_ps mac80211_disable_dyn_ps
+#define ieee80211_enable_dyn_ps mac80211_enable_dyn_ps
+#define ieee80211_cqm_rssi_notify mac80211_cqm_rssi_notify
+#define ieee80211_chswitch_done mac80211_chswitch_done
+#define ieee80211_request_smps mac80211_request_smps
+#define ieee80211_key_removed mac80211_key_removed
+#define ieee80211_ready_on_channel mac80211_ready_on_channel
+#define ieee80211_remain_on_channel_expired mac80211_remain_on_channel_expired
+
+#define IEEE80211_RC_HT_CHANGED MAC80211_RC_HT_CHANGED
+
+#define ieee80211_tx_rate_control mac80211_tx_rate_control
+
+#define ieee80211_rate_control_register mac80211_rate_control_register
+#define ieee80211_rate_control_unregister mac80211_rate_control_unregister
+
+#define ieee80211_iftype_p2p mac80211_iftype_p2p
+#define ieee80211_vif_type_p2p mac80211_vif_type_p2p
+
+#endif /* MAC80211_COMPAT_H */
@@ -21,6 +21,8 @@
#include <linux/ieee80211.h>
#include <net/cfg80211.h>
+#include <net/mac80211-compat.h>
+
/**
* DOC: Introduction
*
@@ -33,7 +35,7 @@
/**
* DOC: Calling mac80211 from interrupts
*
- * Only ieee80211_tx_status_irqsafe() and ieee80211_rx_irqsafe() can be
+ * Only mac80211_tx_status_irqsafe() and mac80211_rx_irqsafe() can be
* called in hardware interrupt context. The low-level driver must not call any
* other functions in hardware interrupt context. If there is a need for such
* call, the low-level driver should first ACK the interrupt and perform the
@@ -88,30 +90,30 @@
*/
/**
- * enum ieee80211_max_queues - maximum number of queues
+ * enum mac80211_max_queues - maximum number of queues
*
- * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues.
+ * @MAC80211_MAX_QUEUES: Maximum number of regular device queues.
*/
-enum ieee80211_max_queues {
- IEEE80211_MAX_QUEUES = 4,
+enum mac80211_max_queues {
+ MAC80211_MAX_QUEUES = 4,
};
/**
- * enum ieee80211_ac_numbers - AC numbers as used in mac80211
- * @IEEE80211_AC_VO: voice
- * @IEEE80211_AC_VI: video
- * @IEEE80211_AC_BE: best effort
- * @IEEE80211_AC_BK: background
+ * enum mac80211_ac_numbers - AC numbers as used in mac80211
+ * @MAC80211_AC_VO: voice
+ * @MAC80211_AC_VI: video
+ * @MAC80211_AC_BE: best effort
+ * @MAC80211_AC_BK: background
*/
-enum ieee80211_ac_numbers {
- IEEE80211_AC_VO = 0,
- IEEE80211_AC_VI = 1,
- IEEE80211_AC_BE = 2,
- IEEE80211_AC_BK = 3,
+enum mac80211_ac_numbers {
+ MAC80211_AC_VO = 0,
+ MAC80211_AC_VI = 1,
+ MAC80211_AC_BE = 2,
+ MAC80211_AC_BK = 3,
};
/**
- * struct ieee80211_tx_queue_params - transmit queue configuration
+ * struct mac80211_tx_queue_params - transmit queue configuration
*
* The information provided in this structure is required for QoS
* transmit queue configuration. Cf. IEEE 802.11 7.3.2.29.
@@ -123,7 +125,7 @@ enum ieee80211_ac_numbers {
* @txop: maximum burst time in units of 32 usecs, 0 meaning disabled
* @uapsd: is U-APSD mode enabled for the queue
*/
-struct ieee80211_tx_queue_params {
+struct mac80211_tx_queue_params {
u16 txop;
u16 cw_min;
u16 cw_max;
@@ -131,7 +133,7 @@ struct ieee80211_tx_queue_params {
bool uapsd;
};
-struct ieee80211_low_level_stats {
+struct mac80211_low_level_stats {
unsigned int dot11ACKFailureCount;
unsigned int dot11RTSFailureCount;
unsigned int dot11FCSErrorCount;
@@ -139,7 +141,7 @@ struct ieee80211_low_level_stats {
};
/**
- * enum ieee80211_bss_change - BSS change notification flags
+ * enum mac80211_bss_change - BSS change notification flags
*
* These flags are used with the bss_info_changed() callback
* to indicate which BSS parameter changed.
@@ -165,7 +167,7 @@ struct ieee80211_low_level_stats {
* that it is only ever disabled for station mode.
* @BSS_CHANGED_IDLE: Idle changed for this BSS/interface.
*/
-enum ieee80211_bss_change {
+enum mac80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
BSS_CHANGED_ERP_CTS_PROT = 1<<1,
BSS_CHANGED_ERP_PREAMBLE = 1<<2,
@@ -182,7 +184,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_QOS = 1<<13,
BSS_CHANGED_IDLE = 1<<14,
- /* when adding here, make sure to change ieee80211_reconfig */
+ /* when adding here, make sure to change mac80211_reconfig */
};
/*
@@ -190,10 +192,10 @@ enum ieee80211_bss_change {
* of addresses for an interface increase beyond this value, hardware ARP
* filtering will be disabled.
*/
-#define IEEE80211_BSS_ARP_ADDR_LIST_LEN 4
+#define MAC80211_BSS_ARP_ADDR_LIST_LEN 4
/**
- * struct ieee80211_bss_conf - holds the BSS's changing parameters
+ * struct mac80211_bss_conf - holds the BSS's changing parameters
*
* This structure keeps information about a BSS (and an association
* to that BSS) that can change during the lifetime of the BSS.
@@ -205,13 +207,13 @@ enum ieee80211_bss_change {
* @use_cts_prot: use CTS protection
* @use_short_preamble: use 802.11b short preamble;
* if the hardware cannot handle this it must set the
- * IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE hardware flag
+ * MAC80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE hardware flag
* @use_short_slot: use short slot time (only relevant for ERP);
* if the hardware cannot handle this it must set the
- * IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
+ * MAC80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
* @dtim_period: num of beacons before the next DTIM, for beaconing,
* valid in station mode only while @assoc is true and if also
- * requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf
+ * requested by %MAC80211_HW_NEED_DTIM_PERIOD (cf. also hw conf
* @ps_dtim_period)
* @timestamp: beacon timestamp
* @beacon_int: beacon interval
@@ -225,7 +227,7 @@ enum ieee80211_bss_change {
* @channel_type: Channel type for this BSS -- the hardware might be
* configured for HT40+ while this BSS only uses no-HT, for
* example.
- * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info).
+ * @ht_operation_mode: HT operation mode (like in &struct mac80211_ht_info).
* This field is only valid when the channel type is one of the HT types.
* @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
* implies disabled
@@ -244,7 +246,7 @@ enum ieee80211_bss_change {
* hardware config which may be more appropriate depending on what
* your driver/device needs to do.
*/
-struct ieee80211_bss_conf {
+struct mac80211_bss_conf {
const u8 *bssid;
/* association related data */
bool assoc, ibss_joined;
@@ -264,7 +266,7 @@ struct ieee80211_bss_conf {
s32 cqm_rssi_thold;
u32 cqm_rssi_hyst;
enum nl80211_channel_type channel_type;
- __be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
+ __be32 arp_addr_list[MAC80211_BSS_ARP_ADDR_LIST_LEN];
u8 arp_addr_cnt;
bool arp_filter_enabled;
bool qos;
@@ -274,13 +276,13 @@ struct ieee80211_bss_conf {
/**
* enum mac80211_tx_control_flags - flags to describe transmission information/status
*
- * These flags are used with the @flags member of &ieee80211_tx_info.
+ * These flags are used with the @flags member of &mac80211_tx_info.
*
- * @IEEE80211_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame.
- * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence
+ * @MAC80211_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame.
+ * @MAC80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence
* number to this frame, taking care of not overwriting the fragment
* number and increasing the sequence number only when the
- * IEEE80211_TX_CTL_FIRST_FRAGMENT flag is set. mac80211 will properly
+ * MAC80211_TX_CTL_FIRST_FRAGMENT flag is set. mac80211 will properly
* assign sequence numbers to QoS-data frames but cannot do so correctly
* for non-QoS-data and management frames because beacons need them from
* that counter as well and mac80211 cannot guarantee proper sequencing.
@@ -288,154 +290,154 @@ struct ieee80211_bss_conf {
* assign a sequence number to the frame or assign one itself. Cf. IEEE
* 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for
* beacons and always be clear for frames without a sequence number field.
- * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack
- * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination
+ * @MAC80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack
+ * @MAC80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination
* station
- * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame
- * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
- * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
- * @IEEE80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211.
- * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted
+ * @MAC80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame
+ * @MAC80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
+ * @MAC80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
+ * @MAC80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211.
+ * @MAC80211_TX_STAT_TX_FILTERED: The frame was not transmitted
* because the destination STA was in powersave mode. Note that to
* avoid race conditions, the filter must be set by the hardware or
* firmware upon receiving a frame that indicates that the station
* went to sleep (must be done on device to filter frames already on
* the queue) and may only be unset after mac80211 gives the OK for
- * that by setting the IEEE80211_TX_CTL_CLEAR_PS_FILT (see above),
+ * that by setting the MAC80211_TX_CTL_CLEAR_PS_FILT (see above),
* since only then is it guaranteed that no more frames are in the
* hardware queue.
- * @IEEE80211_TX_STAT_ACK: Frame was acknowledged
- * @IEEE80211_TX_STAT_AMPDU: The frame was aggregated, so status
+ * @MAC80211_TX_STAT_ACK: Frame was acknowledged
+ * @MAC80211_TX_STAT_AMPDU: The frame was aggregated, so status
* is for the whole aggregation.
- * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned,
+ * @MAC80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned,
* so consider using block ack request (BAR).
- * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be
+ * @MAC80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be
* set by rate control algorithms to indicate probe rate, will
* be cleared for fragmented frames (except on the last fragment)
- * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
+ * @MAC80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
* used to indicate that a pending frame requires TX processing before
* it can be sent out.
- * @IEEE80211_TX_INTFL_RETRIED: completely internal to mac80211,
+ * @MAC80211_TX_INTFL_RETRIED: completely internal to mac80211,
* used to indicate that a frame was already retried due to PS
- * @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211,
+ * @MAC80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211,
* used to indicate frame should not be encrypted
- * @IEEE80211_TX_CTL_PSPOLL_RESPONSE: (internal?)
+ * @MAC80211_TX_CTL_PSPOLL_RESPONSE: (internal?)
* This frame is a response to a PS-poll frame and should be sent
* although the station is in powersave mode.
- * @IEEE80211_TX_CTL_MORE_FRAMES: More frames will be passed to the
+ * @MAC80211_TX_CTL_MORE_FRAMES: More frames will be passed to the
* transmit function after the current frame, this can be used
* by drivers to kick the DMA queue only if unset or when the
* queue gets full.
- * @IEEE80211_TX_INTFL_RETRANSMISSION: This frame is being retransmitted
+ * @MAC80211_TX_INTFL_RETRANSMISSION: This frame is being retransmitted
* after TX status because the destination was asleep, it must not
* be modified again (no seqno assignment, crypto, etc.)
- * @IEEE80211_TX_INTFL_HAS_RADIOTAP: This frame was injected and still
+ * @MAC80211_TX_INTFL_HAS_RADIOTAP: This frame was injected and still
* has a radiotap header at skb->data.
- * @IEEE80211_TX_INTFL_NL80211_FRAME_TX: Frame was requested through nl80211
+ * @MAC80211_TX_INTFL_NL80211_FRAME_TX: Frame was requested through nl80211
* MLME command (internal to mac80211 to figure out whether to send TX
* status to user space)
- * @IEEE80211_TX_CTL_LDPC: tells the driver to use LDPC for this frame
- * @IEEE80211_TX_CTL_STBC: Enables Space-Time Block Coding (STBC) for this
+ * @MAC80211_TX_CTL_LDPC: tells the driver to use LDPC for this frame
+ * @MAC80211_TX_CTL_STBC: Enables Space-Time Block Coding (STBC) for this
* frame and selects the maximum number of streams that it can use.
- * @IEEE80211_TX_CTL_TX_OFFCHAN: Marks this packet to be transmitted on
+ * @MAC80211_TX_CTL_TX_OFFCHAN: Marks this packet to be transmitted on
* the off-channel channel when a remain-on-channel offload is done
* in hardware -- normal packets still flow and are expected to be
* handled properly by the device.
- * @IEEE80211_TX_INTFL_TKIP_MIC_FAILURE: Marks this packet to be used for TKIP
+ * @MAC80211_TX_INTFL_TKIP_MIC_FAILURE: Marks this packet to be used for TKIP
* testing. It will be sent out with incorrect Michael MIC key to allow
* TKIP countermeasures to be tested.
*
* Note: If you have to add new flags to the enumeration, then don't
- * forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
+ * forget to update %MAC80211_TX_TEMPORARY_FLAGS when necessary.
*/
enum mac80211_tx_control_flags {
- IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0),
- IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(1),
- IEEE80211_TX_CTL_NO_ACK = BIT(2),
- IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(3),
- IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(4),
- IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(5),
- IEEE80211_TX_CTL_AMPDU = BIT(6),
- IEEE80211_TX_CTL_INJECTED = BIT(7),
- IEEE80211_TX_STAT_TX_FILTERED = BIT(8),
- IEEE80211_TX_STAT_ACK = BIT(9),
- IEEE80211_TX_STAT_AMPDU = BIT(10),
- IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11),
- IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12),
- IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14),
- IEEE80211_TX_INTFL_RETRIED = BIT(15),
- IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16),
- IEEE80211_TX_CTL_PSPOLL_RESPONSE = BIT(17),
- IEEE80211_TX_CTL_MORE_FRAMES = BIT(18),
- IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19),
- IEEE80211_TX_INTFL_HAS_RADIOTAP = BIT(20),
- IEEE80211_TX_INTFL_NL80211_FRAME_TX = BIT(21),
- IEEE80211_TX_CTL_LDPC = BIT(22),
- IEEE80211_TX_CTL_STBC = BIT(23) | BIT(24),
- IEEE80211_TX_CTL_TX_OFFCHAN = BIT(25),
- IEEE80211_TX_INTFL_TKIP_MIC_FAILURE = BIT(26),
+ MAC80211_TX_CTL_REQ_TX_STATUS = BIT(0),
+ MAC80211_TX_CTL_ASSIGN_SEQ = BIT(1),
+ MAC80211_TX_CTL_NO_ACK = BIT(2),
+ MAC80211_TX_CTL_CLEAR_PS_FILT = BIT(3),
+ MAC80211_TX_CTL_FIRST_FRAGMENT = BIT(4),
+ MAC80211_TX_CTL_SEND_AFTER_DTIM = BIT(5),
+ MAC80211_TX_CTL_AMPDU = BIT(6),
+ MAC80211_TX_CTL_INJECTED = BIT(7),
+ MAC80211_TX_STAT_TX_FILTERED = BIT(8),
+ MAC80211_TX_STAT_ACK = BIT(9),
+ MAC80211_TX_STAT_AMPDU = BIT(10),
+ MAC80211_TX_STAT_AMPDU_NO_BACK = BIT(11),
+ MAC80211_TX_CTL_RATE_CTRL_PROBE = BIT(12),
+ MAC80211_TX_INTFL_NEED_TXPROCESSING = BIT(14),
+ MAC80211_TX_INTFL_RETRIED = BIT(15),
+ MAC80211_TX_INTFL_DONT_ENCRYPT = BIT(16),
+ MAC80211_TX_CTL_PSPOLL_RESPONSE = BIT(17),
+ MAC80211_TX_CTL_MORE_FRAMES = BIT(18),
+ MAC80211_TX_INTFL_RETRANSMISSION = BIT(19),
+ MAC80211_TX_INTFL_HAS_RADIOTAP = BIT(20),
+ MAC80211_TX_INTFL_NL80211_FRAME_TX = BIT(21),
+ MAC80211_TX_CTL_LDPC = BIT(22),
+ MAC80211_TX_CTL_STBC = BIT(23) | BIT(24),
+ MAC80211_TX_CTL_TX_OFFCHAN = BIT(25),
+ MAC80211_TX_INTFL_TKIP_MIC_FAILURE = BIT(26),
};
-#define IEEE80211_TX_CTL_STBC_SHIFT 23
+#define MAC80211_TX_CTL_STBC_SHIFT 23
/*
* This definition is used as a mask to clear all temporary flags, which are
* set by the tx handlers for each transmission attempt by the mac80211 stack.
*/
-#define IEEE80211_TX_TEMPORARY_FLAGS (IEEE80211_TX_CTL_NO_ACK | \
- IEEE80211_TX_CTL_CLEAR_PS_FILT | IEEE80211_TX_CTL_FIRST_FRAGMENT | \
- IEEE80211_TX_CTL_SEND_AFTER_DTIM | IEEE80211_TX_CTL_AMPDU | \
- IEEE80211_TX_STAT_TX_FILTERED | IEEE80211_TX_STAT_ACK | \
- IEEE80211_TX_STAT_AMPDU | IEEE80211_TX_STAT_AMPDU_NO_BACK | \
- IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_PSPOLL_RESPONSE | \
- IEEE80211_TX_CTL_MORE_FRAMES | IEEE80211_TX_CTL_LDPC | \
- IEEE80211_TX_CTL_STBC)
+#define MAC80211_TX_TEMPORARY_FLAGS (MAC80211_TX_CTL_NO_ACK | \
+ MAC80211_TX_CTL_CLEAR_PS_FILT | MAC80211_TX_CTL_FIRST_FRAGMENT | \
+ MAC80211_TX_CTL_SEND_AFTER_DTIM | MAC80211_TX_CTL_AMPDU | \
+ MAC80211_TX_STAT_TX_FILTERED | MAC80211_TX_STAT_ACK | \
+ MAC80211_TX_STAT_AMPDU | MAC80211_TX_STAT_AMPDU_NO_BACK | \
+ MAC80211_TX_CTL_RATE_CTRL_PROBE | MAC80211_TX_CTL_PSPOLL_RESPONSE | \
+ MAC80211_TX_CTL_MORE_FRAMES | MAC80211_TX_CTL_LDPC | \
+ MAC80211_TX_CTL_STBC)
/**
* enum mac80211_rate_control_flags - per-rate flags set by the
* Rate Control algorithm.
*
* These flags are set by the Rate control algorithm for each rate during tx,
- * in the @flags member of struct ieee80211_tx_rate.
+ * in the @flags member of struct mac80211_tx_rate.
*
- * @IEEE80211_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate.
- * @IEEE80211_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required.
+ * @MAC80211_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate.
+ * @MAC80211_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required.
* This is set if the current BSS requires ERP protection.
- * @IEEE80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
- * @IEEE80211_TX_RC_MCS: HT rate.
- * @IEEE80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in
+ * @MAC80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
+ * @MAC80211_TX_RC_MCS: HT rate.
+ * @MAC80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in
* Greenfield mode.
- * @IEEE80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz.
- * @IEEE80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the
+ * @MAC80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz.
+ * @MAC80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the
* adjacent 20 MHz channels, if the current channel type is
* NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
- * @IEEE80211_TX_RC_SHORT_GI: Short Guard interval should be used for this rate.
+ * @MAC80211_TX_RC_SHORT_GI: Short Guard interval should be used for this rate.
*/
enum mac80211_rate_control_flags {
- IEEE80211_TX_RC_USE_RTS_CTS = BIT(0),
- IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1),
- IEEE80211_TX_RC_USE_SHORT_PREAMBLE = BIT(2),
+ MAC80211_TX_RC_USE_RTS_CTS = BIT(0),
+ MAC80211_TX_RC_USE_CTS_PROTECT = BIT(1),
+ MAC80211_TX_RC_USE_SHORT_PREAMBLE = BIT(2),
/* rate index is an MCS rate number instead of an index */
- IEEE80211_TX_RC_MCS = BIT(3),
- IEEE80211_TX_RC_GREEN_FIELD = BIT(4),
- IEEE80211_TX_RC_40_MHZ_WIDTH = BIT(5),
- IEEE80211_TX_RC_DUP_DATA = BIT(6),
- IEEE80211_TX_RC_SHORT_GI = BIT(7),
+ MAC80211_TX_RC_MCS = BIT(3),
+ MAC80211_TX_RC_GREEN_FIELD = BIT(4),
+ MAC80211_TX_RC_40_MHZ_WIDTH = BIT(5),
+ MAC80211_TX_RC_DUP_DATA = BIT(6),
+ MAC80211_TX_RC_SHORT_GI = BIT(7),
};
/* there are 40 bytes if you don't need the rateset to be kept */
-#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE 40
+#define MAC80211_TX_INFO_DRIVER_DATA_SIZE 40
/* if you do need the rateset, then you have less space */
-#define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24
+#define MAC80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24
/* maximum number of rate stages */
-#define IEEE80211_TX_MAX_RATES 5
+#define MAC80211_TX_MAX_RATES 5
/**
- * struct ieee80211_tx_rate - rate selection/status
+ * struct mac80211_tx_rate - rate selection/status
*
* @idx: rate index to attempt to send with
* @flags: rate control flags (&enum mac80211_rate_control_flags)
@@ -447,7 +449,7 @@ enum mac80211_rate_control_flags {
* When used for transmit status reporting, the driver should
* always report the rate along with the flags it used.
*
- * &struct ieee80211_tx_info contains an array of these structs
+ * &struct mac80211_tx_info contains an array of these structs
* in the control information, and it will be filled by the rate
* control algorithm according to what should be sent. For example,
* if this array contains, in the format { <idx>, <count> } the
@@ -462,14 +464,14 @@ enum mac80211_rate_control_flags {
* since it was transmitted twice at rate 3, twice at rate 2
* and once at rate 1 after which we received an acknowledgement.
*/
-struct ieee80211_tx_rate {
+struct mac80211_tx_rate {
s8 idx;
u8 count;
u8 flags;
} __packed;
/**
- * struct ieee80211_tx_info - skb transmit information
+ * struct mac80211_tx_info - skb transmit information
*
* This structure is placed in skb->cb for three uses:
* (1) mac80211 TX control - mac80211 tells the driver what to do
@@ -487,12 +489,12 @@ struct ieee80211_tx_rate {
* @status: union for status data
* @driver_data: array of driver_data pointers
* @ampdu_ack_len: number of acked aggregated frames.
- * relevant only if IEEE80211_TX_STAT_AMPDU was set.
+ * relevant only if MAC80211_TX_STAT_AMPDU was set.
* @ampdu_len: number of aggregated frames.
- * relevant only if IEEE80211_TX_STAT_AMPDU was set.
+ * relevant only if MAC80211_TX_STAT_AMPDU was set.
* @ack_signal: signal strength of the ACK frame
*/
-struct ieee80211_tx_info {
+struct mac80211_tx_info {
/* common information */
u32 flags;
u8 band;
@@ -507,38 +509,38 @@ struct ieee80211_tx_info {
union {
/* rate control */
struct {
- struct ieee80211_tx_rate rates[
- IEEE80211_TX_MAX_RATES];
+ struct mac80211_tx_rate rates[
+ MAC80211_TX_MAX_RATES];
s8 rts_cts_rate_idx;
};
/* only needed before rate control */
unsigned long jiffies;
};
/* NB: vif can be NULL for injected frames */
- struct ieee80211_vif *vif;
- struct ieee80211_key_conf *hw_key;
- struct ieee80211_sta *sta;
+ struct mac80211_vif *vif;
+ struct mac80211_key_conf *hw_key;
+ struct mac80211_sta *sta;
} control;
struct {
- struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
+ struct mac80211_tx_rate rates[MAC80211_TX_MAX_RATES];
u8 ampdu_ack_len;
int ack_signal;
u8 ampdu_len;
/* 15 bytes free */
} status;
struct {
- struct ieee80211_tx_rate driver_rates[
- IEEE80211_TX_MAX_RATES];
+ struct mac80211_tx_rate driver_rates[
+ MAC80211_TX_MAX_RATES];
void *rate_driver_data[
- IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)];
+ MAC80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)];
};
void *driver_data[
- IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)];
+ MAC80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)];
};
};
/**
- * struct ieee80211_sched_scan_ies - scheduled scan IEs
+ * struct mac80211_sched_scan_ies - scheduled scan IEs
*
* This structure is used to pass the appropriate IEs to be used in scheduled
* scans for all bands. It contains both the IEs passed from the userspace
@@ -547,25 +549,25 @@ struct ieee80211_tx_info {
* @ie: array with the IEs for each supported band
* @len: array with the total length of the IEs for each band
*/
-struct ieee80211_sched_scan_ies {
+struct mac80211_sched_scan_ies {
u8 *ie[IEEE80211_NUM_BANDS];
size_t len[IEEE80211_NUM_BANDS];
};
-static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb)
+static inline struct mac80211_tx_info *MAC80211_SKB_CB(struct sk_buff *skb)
{
- return (struct ieee80211_tx_info *)skb->cb;
+ return (struct mac80211_tx_info *)skb->cb;
}
-static inline struct ieee80211_rx_status *IEEE80211_SKB_RXCB(struct sk_buff *skb)
+static inline struct mac80211_rx_status *MAC80211_SKB_RXCB(struct sk_buff *skb)
{
- return (struct ieee80211_rx_status *)skb->cb;
+ return (struct mac80211_rx_status *)skb->cb;
}
/**
- * ieee80211_tx_info_clear_status - clear TX status
+ * mac80211_tx_info_clear_status - clear TX status
*
- * @info: The &struct ieee80211_tx_info to be cleared.
+ * @info: The &struct mac80211_tx_info to be cleared.
*
* When the driver passes an skb back to mac80211, it must report
* a number of things in TX status. This function clears everything
@@ -577,31 +579,31 @@ static inline struct ieee80211_rx_status *IEEE80211_SKB_RXCB(struct sk_buff *skb
* instead if you need only the less space that allows.
*/
static inline void
-ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
+mac80211_tx_info_clear_status(struct mac80211_tx_info *info)
{
int i;
- BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) !=
- offsetof(struct ieee80211_tx_info, control.rates));
- BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) !=
- offsetof(struct ieee80211_tx_info, driver_rates));
- BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != 8);
+ BUILD_BUG_ON(offsetof(struct mac80211_tx_info, status.rates) !=
+ offsetof(struct mac80211_tx_info, control.rates));
+ BUILD_BUG_ON(offsetof(struct mac80211_tx_info, status.rates) !=
+ offsetof(struct mac80211_tx_info, driver_rates));
+ BUILD_BUG_ON(offsetof(struct mac80211_tx_info, status.rates) != 8);
/* clear the rate counts */
- for (i = 0; i < IEEE80211_TX_MAX_RATES; i++)
+ for (i = 0; i < MAC80211_TX_MAX_RATES; i++)
info->status.rates[i].count = 0;
BUILD_BUG_ON(
- offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23);
+ offsetof(struct mac80211_tx_info, status.ampdu_ack_len) != 23);
memset(&info->status.ampdu_ack_len, 0,
- sizeof(struct ieee80211_tx_info) -
- offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
+ sizeof(struct mac80211_tx_info) -
+ offsetof(struct mac80211_tx_info, status.ampdu_ack_len));
}
/**
* enum mac80211_rx_flags - receive flags
*
- * These flags are used with the @flag member of &struct ieee80211_rx_status.
+ * These flags are used with the @flag member of &struct mac80211_rx_status.
* @RX_FLAG_MMIC_ERROR: Michael MIC error was reported on this frame.
* Use together with %RX_FLAG_MMIC_STRIPPED.
* @RX_FLAG_DECRYPTED: This frame was decrypted in hardware.
@@ -638,7 +640,7 @@ enum mac80211_rx_flags {
};
/**
- * struct ieee80211_rx_status - receive status
+ * struct mac80211_rx_status - receive status
*
* The low-level driver should provide this information (the subset
* supported by hardware) to the 802.11 code with each received
@@ -650,14 +652,14 @@ enum mac80211_rx_flags {
* @freq: frequency the radio was tuned to when receiving this frame, in MHz
* @signal: signal strength when receiving this frame, either in dBm, in dB or
* unspecified depending on the hardware capabilities flags
- * @IEEE80211_HW_SIGNAL_*
+ * @MAC80211_HW_SIGNAL_*
* @antenna: antenna used
* @rate_idx: index of data rate into band's supported rates or MCS index if
* HT rates are use (RX_FLAG_HT)
* @flag: %RX_FLAG_*
* @rx_flags: internal RX flags for mac80211
*/
-struct ieee80211_rx_status {
+struct mac80211_rx_status {
u64 mactime;
enum ieee80211_band band;
int freq;
@@ -669,80 +671,80 @@ struct ieee80211_rx_status {
};
/**
- * enum ieee80211_conf_flags - configuration flags
+ * enum mac80211_conf_flags - configuration flags
*
* Flags to define PHY configuration options
*
- * @IEEE80211_CONF_MONITOR: there's a monitor interface present -- use this
+ * @MAC80211_CONF_MONITOR: there's a monitor interface present -- use this
* to determine for example whether to calculate timestamps for packets
* or not, do not use instead of filter flags!
- * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only).
+ * @MAC80211_CONF_PS: Enable 802.11 power save mode (managed mode only).
* This is the power save mode defined by IEEE 802.11-2007 section 11.2,
* meaning that the hardware still wakes up for beacons, is able to
* transmit frames and receive the possible acknowledgment frames.
* Not to be confused with hardware specific wakeup/sleep states,
* driver is responsible for that. See the section "Powersave support"
* for more.
- * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set
+ * @MAC80211_CONF_IDLE: The device is running, but idle; if the flag is set
* the driver should be prepared to handle configuration requests but
* may turn the device off as much as possible. Typically, this flag will
* be set when an interface is set UP but not associated or scanning, but
* it can also be unset in that case when monitor interfaces are active.
- * @IEEE80211_CONF_OFFCHANNEL: The device is currently not on its main
+ * @MAC80211_CONF_OFFCHANNEL: The device is currently not on its main
* operating channel.
*/
-enum ieee80211_conf_flags {
- IEEE80211_CONF_MONITOR = (1<<0),
- IEEE80211_CONF_PS = (1<<1),
- IEEE80211_CONF_IDLE = (1<<2),
- IEEE80211_CONF_OFFCHANNEL = (1<<3),
+enum mac80211_conf_flags {
+ MAC80211_CONF_MONITOR = (1<<0),
+ MAC80211_CONF_PS = (1<<1),
+ MAC80211_CONF_IDLE = (1<<2),
+ MAC80211_CONF_OFFCHANNEL = (1<<3),
};
/**
- * enum ieee80211_conf_changed - denotes which configuration changed
+ * enum mac80211_conf_changed - denotes which configuration changed
*
- * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
- * @IEEE80211_CONF_CHANGE_MONITOR: the monitor flag changed
- * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
- * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
- * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
- * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
- * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed
- * @IEEE80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed
+ * @MAC80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
+ * @MAC80211_CONF_CHANGE_MONITOR: the monitor flag changed
+ * @MAC80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
+ * @MAC80211_CONF_CHANGE_POWER: the TX power changed
+ * @MAC80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
+ * @MAC80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
+ * @MAC80211_CONF_CHANGE_IDLE: Idle flag changed
+ * @MAC80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed
*/
-enum ieee80211_conf_changed {
- IEEE80211_CONF_CHANGE_SMPS = BIT(1),
- IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
- IEEE80211_CONF_CHANGE_MONITOR = BIT(3),
- IEEE80211_CONF_CHANGE_PS = BIT(4),
- IEEE80211_CONF_CHANGE_POWER = BIT(5),
- IEEE80211_CONF_CHANGE_CHANNEL = BIT(6),
- IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7),
- IEEE80211_CONF_CHANGE_IDLE = BIT(8),
+enum mac80211_conf_changed {
+ MAC80211_CONF_CHANGE_SMPS = BIT(1),
+ MAC80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
+ MAC80211_CONF_CHANGE_MONITOR = BIT(3),
+ MAC80211_CONF_CHANGE_PS = BIT(4),
+ MAC80211_CONF_CHANGE_POWER = BIT(5),
+ MAC80211_CONF_CHANGE_CHANNEL = BIT(6),
+ MAC80211_CONF_CHANGE_RETRY_LIMITS = BIT(7),
+ MAC80211_CONF_CHANGE_IDLE = BIT(8),
};
/**
- * enum ieee80211_smps_mode - spatial multiplexing power save mode
+ * enum mac80211_smps_mode - spatial multiplexing power save mode
*
- * @IEEE80211_SMPS_AUTOMATIC: automatic
- * @IEEE80211_SMPS_OFF: off
- * @IEEE80211_SMPS_STATIC: static
- * @IEEE80211_SMPS_DYNAMIC: dynamic
- * @IEEE80211_SMPS_NUM_MODES: internal, don't use
+ * @MAC80211_SMPS_AUTOMATIC: automatic
+ * @MAC80211_SMPS_OFF: off
+ * @MAC80211_SMPS_STATIC: static
+ * @MAC80211_SMPS_DYNAMIC: dynamic
+ * @MAC80211_SMPS_NUM_MODES: internal, don't use
*/
-enum ieee80211_smps_mode {
- IEEE80211_SMPS_AUTOMATIC,
- IEEE80211_SMPS_OFF,
- IEEE80211_SMPS_STATIC,
- IEEE80211_SMPS_DYNAMIC,
+enum mac80211_smps_mode {
+ MAC80211_SMPS_AUTOMATIC,
+ MAC80211_SMPS_OFF,
+ MAC80211_SMPS_STATIC,
+ MAC80211_SMPS_DYNAMIC,
/* keep last */
- IEEE80211_SMPS_NUM_MODES,
+ MAC80211_SMPS_NUM_MODES,
};
/**
- * struct ieee80211_conf - configuration of the device
+ * struct mac80211_conf - configuration of the device
*
* This struct indicates how the driver shall configure the hardware.
*
@@ -774,10 +776,10 @@ enum ieee80211_smps_mode {
* number of transmissions not the number of retries
*
* @smps_mode: spatial multiplexing powersave mode; note that
- * %IEEE80211_SMPS_STATIC is used when the device is not
+ * %MAC80211_SMPS_STATIC is used when the device is not
* configured for an HT channel
*/
-struct ieee80211_conf {
+struct mac80211_conf {
u32 flags;
int power_level, dynamic_ps_timeout;
int max_sleep_period;
@@ -789,11 +791,11 @@ struct ieee80211_conf {
struct ieee80211_channel *channel;
enum nl80211_channel_type channel_type;
- enum ieee80211_smps_mode smps_mode;
+ enum mac80211_smps_mode smps_mode;
};
/**
- * struct ieee80211_channel_switch - holds the channel switch data
+ * struct mac80211_channel_switch - holds the channel switch data
*
* The information provided in this structure is required for channel switch
* operation.
@@ -807,7 +809,7 @@ struct ieee80211_conf {
* @channel: the new channel to switch to
* @count: the number of TBTT's until the channel switch event
*/
-struct ieee80211_channel_switch {
+struct mac80211_channel_switch {
u64 timestamp;
bool block_tx;
struct ieee80211_channel *channel;
@@ -815,7 +817,7 @@ struct ieee80211_channel_switch {
};
/**
- * struct ieee80211_vif - per-interface data
+ * struct mac80211_vif - per-interface data
*
* Data in this structure is continually present for driver
* use during the life of a virtual interface.
@@ -829,16 +831,16 @@ struct ieee80211_channel_switch {
* @drv_priv: data area for driver use, will always be aligned to
* sizeof(void *).
*/
-struct ieee80211_vif {
+struct mac80211_vif {
enum nl80211_iftype type;
- struct ieee80211_bss_conf bss_conf;
+ struct mac80211_bss_conf bss_conf;
u8 addr[ETH_ALEN];
bool p2p;
/* must be last */
u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
};
-static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
+static inline bool mac80211_vif_is_mesh(struct mac80211_vif *vif)
{
#ifdef CONFIG_MAC80211_MESH
return vif->type == NL80211_IFTYPE_MESH_POINT;
@@ -847,44 +849,44 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
}
/**
- * enum ieee80211_key_flags - key flags
+ * enum mac80211_key_flags - key flags
*
* These flags are used for communication about keys between the driver
- * and mac80211, with the @flags parameter of &struct ieee80211_key_conf.
+ * and mac80211, with the @flags parameter of &struct mac80211_key_conf.
*
- * @IEEE80211_KEY_FLAG_WMM_STA: Set by mac80211, this flag indicates
+ * @MAC80211_KEY_FLAG_WMM_STA: Set by mac80211, this flag indicates
* that the STA this key will be used with could be using QoS.
- * @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the
+ * @MAC80211_KEY_FLAG_GENERATE_IV: This flag should be set by the
* driver to indicate that it requires IV generation for this
* particular key.
- * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by
+ * @MAC80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by
* the driver for a TKIP key if it requires Michael MIC
* generation in software.
- * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
+ * @MAC80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
* that the key is pairwise rather then a shared key.
- * @IEEE80211_KEY_FLAG_SW_MGMT: This flag should be set by the driver for a
+ * @MAC80211_KEY_FLAG_SW_MGMT: This flag should be set by the driver for a
* CCMP key if it requires CCMP encryption of management frames (MFP) to
* be done in software.
*/
-enum ieee80211_key_flags {
- IEEE80211_KEY_FLAG_WMM_STA = 1<<0,
- IEEE80211_KEY_FLAG_GENERATE_IV = 1<<1,
- IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
- IEEE80211_KEY_FLAG_PAIRWISE = 1<<3,
- IEEE80211_KEY_FLAG_SW_MGMT = 1<<4,
+enum mac80211_key_flags {
+ MAC80211_KEY_FLAG_WMM_STA = 1<<0,
+ MAC80211_KEY_FLAG_GENERATE_IV = 1<<1,
+ MAC80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
+ MAC80211_KEY_FLAG_PAIRWISE = 1<<3,
+ MAC80211_KEY_FLAG_SW_MGMT = 1<<4,
};
/**
- * struct ieee80211_key_conf - key information
+ * struct mac80211_key_conf - key information
*
* This key information is given by mac80211 to the driver by
- * the set_key() callback in &struct ieee80211_ops.
+ * the set_key() callback in &struct mac80211_ops.
*
* @hw_key_idx: To be set by the driver, this is the key index the driver
* wants to be given when a frame is transmitted and needs to be
* encrypted in hardware.
* @cipher: The key's cipher suite selector.
- * @flags: key flags, see &enum ieee80211_key_flags.
+ * @flags: key flags, see &enum mac80211_key_flags.
* @keyidx: the key index (0-3)
* @keylen: key material length
* @key: key material. For ALG_TKIP the key is encoded as a 256-bit (32 byte)
@@ -895,7 +897,7 @@ enum ieee80211_key_flags {
* @icv_len: The ICV length for this key type
* @iv_len: The IV length for this key type
*/
-struct ieee80211_key_conf {
+struct mac80211_key_conf {
u32 cipher;
u8 icv_len;
u8 iv_len;
@@ -909,7 +911,7 @@ struct ieee80211_key_conf {
/**
* enum set_key_cmd - key command
*
- * Used with the set_key() callback in &struct ieee80211_ops, this
+ * Used with the set_key() callback in &struct mac80211_ops, this
* indicates whether a key is being removed or added.
*
* @SET_KEY: a key is set
@@ -920,11 +922,11 @@ enum set_key_cmd {
};
/**
- * struct ieee80211_sta - station table entry
+ * struct mac80211_sta - station table entry
*
* A station table entry represents a station we are possibly
* communicating with. Since stations are RCU-managed in
- * mac80211, any ieee80211_sta pointer you get access to must
+ * mac80211, any mac80211_sta pointer you get access to must
* either be protected by rcu_read_lock() explicitly or implicitly,
* or you must take good care to not use such a pointer after a
* call to your sta_remove callback that removed it.
@@ -936,7 +938,7 @@ enum set_key_cmd {
* @drv_priv: data area for driver use, will always be aligned to
* sizeof(void *), size is determined in hw information.
*/
-struct ieee80211_sta {
+struct mac80211_sta {
u32 supp_rates[IEEE80211_NUM_BANDS];
u8 addr[ETH_ALEN];
u16 aid;
@@ -949,7 +951,7 @@ struct ieee80211_sta {
/**
* enum sta_notify_cmd - sta notify command
*
- * Used with the sta_notify() callback in &struct ieee80211_ops, this
+ * Used with the sta_notify() callback in &struct mac80211_ops, this
* indicates if an associated station made a power state transition.
*
* @STA_NOTIFY_SLEEP: a station is now sleeping
@@ -960,22 +962,22 @@ enum sta_notify_cmd {
};
/**
- * enum ieee80211_tkip_key_type - get tkip key
+ * enum mac80211_tkip_key_type - get tkip key
*
* Used by drivers which need to get a tkip key for skb. Some drivers need a
* phase 1 key, others need a phase 2 key. A single function allows the driver
* to get the key, this enum indicates what type of key is required.
*
- * @IEEE80211_TKIP_P1_KEY: the driver needs a phase 1 key
- * @IEEE80211_TKIP_P2_KEY: the driver needs a phase 2 key
+ * @MAC80211_TKIP_P1_KEY: the driver needs a phase 1 key
+ * @MAC80211_TKIP_P2_KEY: the driver needs a phase 2 key
*/
-enum ieee80211_tkip_key_type {
- IEEE80211_TKIP_P1_KEY,
- IEEE80211_TKIP_P2_KEY,
+enum mac80211_tkip_key_type {
+ MAC80211_TKIP_P1_KEY,
+ MAC80211_TKIP_P2_KEY,
};
/**
- * enum ieee80211_hw_flags - hardware flags
+ * enum mac80211_hw_flags - hardware flags
*
* These flags are used to indicate hardware capabilities to
* the stack. Generally, flags here should have their meaning
@@ -983,7 +985,7 @@ enum ieee80211_tkip_key_type {
* any particular flags. There are some exceptions to this rule,
* however, so you are advised to review these flags carefully.
*
- * @IEEE80211_HW_HAS_RATE_CONTROL:
+ * @MAC80211_HW_HAS_RATE_CONTROL:
* The hardware or firmware includes rate control, and cannot be
* controlled by the stack. As such, no rate control algorithm
* should be instantiated, and the TX rate reported to userspace
@@ -996,151 +998,151 @@ enum ieee80211_tkip_key_type {
* timing in 2.4 GHz and @use_short_preamble for preambles for
* CCK frames.
*
- * @IEEE80211_HW_RX_INCLUDES_FCS:
+ * @MAC80211_HW_RX_INCLUDES_FCS:
* Indicates that received frames passed to the stack include
* the FCS at the end.
*
- * @IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING:
+ * @MAC80211_HW_HOST_BROADCAST_PS_BUFFERING:
* Some wireless LAN chipsets buffer broadcast/multicast frames
* for power saving stations in the hardware/firmware and others
* rely on the host system for such buffering. This option is used
* to configure the IEEE 802.11 upper layer to buffer broadcast and
* multicast frames when there are power saving stations so that
- * the driver can fetch them with ieee80211_get_buffered_bc().
+ * the driver can fetch them with mac80211_get_buffered_bc().
*
- * @IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE:
+ * @MAC80211_HW_2GHZ_SHORT_SLOT_INCAPABLE:
* Hardware is not capable of short slot operation on the 2.4 GHz band.
*
- * @IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE:
+ * @MAC80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE:
* Hardware is not capable of receiving frames with short preamble on
* the 2.4 GHz band.
*
- * @IEEE80211_HW_SIGNAL_UNSPEC:
+ * @MAC80211_HW_SIGNAL_UNSPEC:
* Hardware can provide signal values but we don't know its units. We
* expect values between 0 and @max_signal.
* If possible please provide dB or dBm instead.
*
- * @IEEE80211_HW_SIGNAL_DBM:
+ * @MAC80211_HW_SIGNAL_DBM:
* Hardware gives signal values in dBm, decibel difference from
* one milliwatt. This is the preferred method since it is standardized
* between different devices. @max_signal does not need to be set.
*
- * @IEEE80211_HW_SPECTRUM_MGMT:
+ * @MAC80211_HW_SPECTRUM_MGMT:
* Hardware supports spectrum management defined in 802.11h
* Measurement, Channel Switch, Quieting, TPC
*
- * @IEEE80211_HW_AMPDU_AGGREGATION:
+ * @MAC80211_HW_AMPDU_AGGREGATION:
* Hardware supports 11n A-MPDU aggregation.
*
- * @IEEE80211_HW_SUPPORTS_PS:
+ * @MAC80211_HW_SUPPORTS_PS:
* Hardware has power save support (i.e. can go to sleep).
*
- * @IEEE80211_HW_PS_NULLFUNC_STACK:
+ * @MAC80211_HW_PS_NULLFUNC_STACK:
* Hardware requires nullfunc frame handling in stack, implies
* stack support for dynamic PS.
*
- * @IEEE80211_HW_SUPPORTS_DYNAMIC_PS:
+ * @MAC80211_HW_SUPPORTS_DYNAMIC_PS:
* Hardware has support for dynamic PS.
*
- * @IEEE80211_HW_MFP_CAPABLE:
+ * @MAC80211_HW_MFP_CAPABLE:
* Hardware supports management frame protection (MFP, IEEE 802.11w).
*
- * @IEEE80211_HW_BEACON_FILTER:
+ * @MAC80211_HW_BEACON_FILTER:
* Hardware supports dropping of irrelevant beacon frames to
* avoid waking up cpu.
*
- * @IEEE80211_HW_SUPPORTS_STATIC_SMPS:
+ * @MAC80211_HW_SUPPORTS_STATIC_SMPS:
* Hardware supports static spatial multiplexing powersave,
* ie. can turn off all but one chain even on HT connections
* that should be using more chains.
*
- * @IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS:
+ * @MAC80211_HW_SUPPORTS_DYNAMIC_SMPS:
* Hardware supports dynamic spatial multiplexing powersave,
* ie. can turn off all but one chain and then wake the rest
* up as required after, for example, rts/cts handshake.
*
- * @IEEE80211_HW_SUPPORTS_UAPSD:
+ * @MAC80211_HW_SUPPORTS_UAPSD:
* Hardware supports Unscheduled Automatic Power Save Delivery
* (U-APSD) in managed mode. The mode is configured with
* conf_tx() operation.
*
- * @IEEE80211_HW_REPORTS_TX_ACK_STATUS:
+ * @MAC80211_HW_REPORTS_TX_ACK_STATUS:
* Hardware can provide ack status reports of Tx frames to
* the stack.
*
- * @IEEE80211_HW_CONNECTION_MONITOR:
+ * @MAC80211_HW_CONNECTION_MONITOR:
* The hardware performs its own connection monitoring, including
* periodic keep-alives to the AP and probing the AP on beacon loss.
* When this flag is set, signaling beacon-loss will cause an immediate
* change to disassociated state.
*
- * @IEEE80211_HW_SUPPORTS_CQM_RSSI:
+ * @MAC80211_HW_SUPPORTS_CQM_RSSI:
* Hardware can do connection quality monitoring - i.e. it can monitor
* connection quality related parameters, such as the RSSI level and
* provide notifications if configured trigger levels are reached.
*
- * @IEEE80211_HW_NEED_DTIM_PERIOD:
+ * @MAC80211_HW_NEED_DTIM_PERIOD:
* This device needs to know the DTIM period for the BSS before
* associating.
*
- * @IEEE80211_HW_SUPPORTS_PER_STA_GTK: The device's crypto engine supports
+ * @MAC80211_HW_SUPPORTS_PER_STA_GTK: The device's crypto engine supports
* per-station GTKs as used by IBSS RSN or during fast transition. If
* the device doesn't support per-station GTKs, but can be asked not
* to decrypt group addressed frames, then IBSS RSN support is still
* possible but software crypto will be used. Advertise the wiphy flag
* only in that case.
*
- * @IEEE80211_HW_AP_LINK_PS: When operating in AP mode the device
+ * @MAC80211_HW_AP_LINK_PS: When operating in AP mode the device
* autonomously manages the PS status of connected stations. When
* this flag is set mac80211 will not trigger PS mode for connected
* stations based on the PM bit of incoming frames.
- * Use ieee80211_start_ps()/ieee8021_end_ps() to manually configure
+ * Use mac80211_start_ps()/ieee8021_end_ps() to manually configure
* the PS mode of connected stations.
*/
-enum ieee80211_hw_flags {
- IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
- IEEE80211_HW_RX_INCLUDES_FCS = 1<<1,
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2,
- IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3,
- IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4,
- IEEE80211_HW_SIGNAL_UNSPEC = 1<<5,
- IEEE80211_HW_SIGNAL_DBM = 1<<6,
- IEEE80211_HW_NEED_DTIM_PERIOD = 1<<7,
- IEEE80211_HW_SPECTRUM_MGMT = 1<<8,
- IEEE80211_HW_AMPDU_AGGREGATION = 1<<9,
- IEEE80211_HW_SUPPORTS_PS = 1<<10,
- IEEE80211_HW_PS_NULLFUNC_STACK = 1<<11,
- IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12,
- IEEE80211_HW_MFP_CAPABLE = 1<<13,
- IEEE80211_HW_BEACON_FILTER = 1<<14,
- IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15,
- IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16,
- IEEE80211_HW_SUPPORTS_UAPSD = 1<<17,
- IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18,
- IEEE80211_HW_CONNECTION_MONITOR = 1<<19,
- IEEE80211_HW_SUPPORTS_CQM_RSSI = 1<<20,
- IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21,
- IEEE80211_HW_AP_LINK_PS = 1<<22,
+enum mac80211_hw_flags {
+ MAC80211_HW_HAS_RATE_CONTROL = 1<<0,
+ MAC80211_HW_RX_INCLUDES_FCS = 1<<1,
+ MAC80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2,
+ MAC80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3,
+ MAC80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4,
+ MAC80211_HW_SIGNAL_UNSPEC = 1<<5,
+ MAC80211_HW_SIGNAL_DBM = 1<<6,
+ MAC80211_HW_NEED_DTIM_PERIOD = 1<<7,
+ MAC80211_HW_SPECTRUM_MGMT = 1<<8,
+ MAC80211_HW_AMPDU_AGGREGATION = 1<<9,
+ MAC80211_HW_SUPPORTS_PS = 1<<10,
+ MAC80211_HW_PS_NULLFUNC_STACK = 1<<11,
+ MAC80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12,
+ MAC80211_HW_MFP_CAPABLE = 1<<13,
+ MAC80211_HW_BEACON_FILTER = 1<<14,
+ MAC80211_HW_SUPPORTS_STATIC_SMPS = 1<<15,
+ MAC80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16,
+ MAC80211_HW_SUPPORTS_UAPSD = 1<<17,
+ MAC80211_HW_REPORTS_TX_ACK_STATUS = 1<<18,
+ MAC80211_HW_CONNECTION_MONITOR = 1<<19,
+ MAC80211_HW_SUPPORTS_CQM_RSSI = 1<<20,
+ MAC80211_HW_SUPPORTS_PER_STA_GTK = 1<<21,
+ MAC80211_HW_AP_LINK_PS = 1<<22,
};
/**
- * struct ieee80211_hw - hardware information and state
+ * struct mac80211_hw - hardware information and state
*
* This structure contains the configuration and hardware
* information for an 802.11 PHY.
*
* @wiphy: This points to the &struct wiphy allocated for this
* 802.11 PHY. You must fill in the @perm_addr and @dev
- * members of this structure using SET_IEEE80211_DEV()
- * and SET_IEEE80211_PERM_ADDR(). Additionally, all supported
+ * members of this structure using SET_MAC80211_DEV()
+ * and SET_MAC80211_PERM_ADDR(). Additionally, all supported
* bands (with channels, bitrates) are registered here.
*
- * @conf: &struct ieee80211_conf, device configuration, don't use.
+ * @conf: &struct mac80211_conf, device configuration, don't use.
*
* @priv: pointer to private area that was allocated for driver use
* along with this structure.
*
- * @flags: hardware flags, see &enum ieee80211_hw_flags.
+ * @flags: hardware flags, see &enum mac80211_hw_flags.
*
* @extra_tx_headroom: headroom to reserve in each transmit skb
* for use by the driver (e.g. for transmit headers.)
@@ -1148,7 +1150,7 @@ enum ieee80211_hw_flags {
* @channel_change_time: time (in microseconds) it takes to change channels.
*
* @max_signal: Maximum value for signal (rssi) in RX information, used
- * only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB
+ * only when @MAC80211_HW_SIGNAL_UNSPEC or @MAC80211_HW_SIGNAL_DB
*
* @max_listen_interval: max listen interval in units of beacon interval
* that HW supports
@@ -1159,12 +1161,12 @@ enum ieee80211_hw_flags {
*
* @rate_control_algorithm: rate control algorithm for this hardware.
* If unset (NULL), the default algorithm will be used. Must be
- * set before calling ieee80211_register_hw().
+ * set before calling mac80211_register_hw().
*
* @vif_data_size: size (in bytes) of the drv_priv data area
- * within &struct ieee80211_vif.
+ * within &struct mac80211_vif.
* @sta_data_size: size (in bytes) of the drv_priv data area
- * within &struct ieee80211_sta.
+ * within &struct mac80211_sta.
*
* @max_rates: maximum number of alternate rate retry stages the hw
* can handle.
@@ -1187,8 +1189,8 @@ enum ieee80211_hw_flags {
* aggregate an HT driver will transmit, used by the peer as a
* hint to size its reorder buffer.
*/
-struct ieee80211_hw {
- struct ieee80211_conf conf;
+struct mac80211_hw {
+ struct mac80211_conf conf;
struct wiphy *wiphy;
const char *rate_control_algorithm;
void *priv;
@@ -1209,43 +1211,43 @@ struct ieee80211_hw {
};
/**
- * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy
+ * wiphy_to_mac80211_hw - return a mac80211 driver hw struct from a wiphy
*
* @wiphy: the &struct wiphy which we want to query
*
* mac80211 drivers can use this to get to their respective
- * &struct ieee80211_hw. Drivers wishing to get to their own private
+ * &struct mac80211_hw. Drivers wishing to get to their own private
* structure can then access it via hw->priv. Note that mac802111 drivers should
* not use wiphy_priv() to try to get their private driver structure as this
* is already used internally by mac80211.
*/
-struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy);
+struct mac80211_hw *wiphy_to_mac80211_hw(struct wiphy *wiphy);
/**
- * SET_IEEE80211_DEV - set device for 802.11 hardware
+ * SET_MAC80211_DEV - set device for 802.11 hardware
*
- * @hw: the &struct ieee80211_hw to set the device for
+ * @hw: the &struct mac80211_hw to set the device for
* @dev: the &struct device of this 802.11 device
*/
-static inline void SET_IEEE80211_DEV(struct ieee80211_hw *hw, struct device *dev)
+static inline void SET_MAC80211_DEV(struct mac80211_hw *hw, struct device *dev)
{
set_wiphy_dev(hw->wiphy, dev);
}
/**
- * SET_IEEE80211_PERM_ADDR - set the permanent MAC address for 802.11 hardware
+ * SET_MAC80211_PERM_ADDR - set the permanent MAC address for 802.11 hardware
*
- * @hw: the &struct ieee80211_hw to set the MAC address for
+ * @hw: the &struct mac80211_hw to set the MAC address for
* @addr: the address to set
*/
-static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr)
+static inline void SET_MAC80211_PERM_ADDR(struct mac80211_hw *hw, u8 *addr)
{
memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN);
}
static inline struct ieee80211_rate *
-ieee80211_get_tx_rate(const struct ieee80211_hw *hw,
- const struct ieee80211_tx_info *c)
+mac80211_get_tx_rate(const struct mac80211_hw *hw,
+ const struct mac80211_tx_info *c)
{
if (WARN_ON(c->control.rates[0].idx < 0))
return NULL;
@@ -1253,8 +1255,8 @@ ieee80211_get_tx_rate(const struct ieee80211_hw *hw,
}
static inline struct ieee80211_rate *
-ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw,
- const struct ieee80211_tx_info *c)
+mac80211_get_rts_cts_rate(const struct mac80211_hw *hw,
+ const struct mac80211_tx_info *c)
{
if (c->control.rts_cts_rate_idx < 0)
return NULL;
@@ -1262,8 +1264,8 @@ ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw,
}
static inline struct ieee80211_rate *
-ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
- const struct ieee80211_tx_info *c, int idx)
+mac80211_get_alt_retry_rate(const struct mac80211_hw *hw,
+ const struct mac80211_tx_info *c, int idx)
{
if (c->control.rates[idx + 1].idx < 0)
return NULL;
@@ -1276,7 +1278,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* mac80211 is capable of taking advantage of many hardware
* acceleration designs for encryption and decryption operations.
*
- * The set_key() callback in the &struct ieee80211_ops for a given
+ * The set_key() callback in the &struct mac80211_ops for a given
* device is called to enable hardware acceleration of encryption and
* decryption. The callback takes a @sta parameter that will be NULL
* for default keys or keys used for transmission only, or point to
@@ -1285,7 +1287,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* VLANs are configured for an access point.
*
* When transmitting, the TX control data will use the @hw_key_idx
- * selected by the driver by modifying the &struct ieee80211_key_conf
+ * selected by the driver by modifying the &struct mac80211_key_conf
* pointed to by the @key parameter to the set_key() function.
*
* The set_key() call for the %SET_KEY command should return 0 if
@@ -1300,7 +1302,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* decision based on whether a key has been uploaded or not but rather
* based on the receive flags.
*
- * The &struct ieee80211_key_conf structure pointed to by the @key
+ * The &struct mac80211_key_conf structure pointed to by the @key
* parameter is guaranteed to be valid until another call to set_key()
* removes it, but it can only be used as a cookie to differentiate
* keys.
@@ -1322,15 +1324,15 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* mac80211 has support for various powersave implementations.
*
* First, it can support hardware that handles all powersaving by itself,
- * such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS hardware
+ * such hardware should simply set the %MAC80211_HW_SUPPORTS_PS hardware
* flag. In that case, it will be told about the desired powersave mode
- * with the %IEEE80211_CONF_PS flag depending on the association status.
+ * with the %MAC80211_CONF_PS flag depending on the association status.
* The hardware must take care of sending nullfunc frames when necessary,
* i.e. when entering and leaving powersave mode. The hardware is required
* to look at the AID in beacons and signal to the AP that it woke up when
* it finds traffic directed to it.
*
- * %IEEE80211_CONF_PS flag enabled means that the powersave mode defined in
+ * %MAC80211_CONF_PS flag enabled means that the powersave mode defined in
* IEEE 802.11-2007 section 11.2 is enabled. This is not to be confused
* with hardware wakeup and sleep states. Driver is responsible for waking
* up the hardware before issuing commands to the hardware and putting it
@@ -1342,8 +1344,8 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
*
* Other hardware designs cannot send nullfunc frames by themselves and also
* need software support for parsing the TIM bitmap. This is also supported
- * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and
- * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still
+ * by mac80211 by combining the %MAC80211_HW_SUPPORTS_PS and
+ * %MAC80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still
* required to pass up beacons. The hardware is still required to handle
* waking up for multicast traffic; if it cannot the driver must handle that
* as best as it can, mac80211 is too slow to do that.
@@ -1356,14 +1358,14 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* periods.
*
* Dynamic powersave is simply supported by mac80211 enabling and disabling
- * PS based on traffic. Driver needs to only set %IEEE80211_HW_SUPPORTS_PS
+ * PS based on traffic. Driver needs to only set %MAC80211_HW_SUPPORTS_PS
* flag and mac80211 will handle everything automatically. Additionally,
* hardware having support for the dynamic PS feature may set the
- * %IEEE80211_HW_SUPPORTS_DYNAMIC_PS flag to indicate that it can support
+ * %MAC80211_HW_SUPPORTS_DYNAMIC_PS flag to indicate that it can support
* dynamic PS mode itself. The driver needs to look at the
* @dynamic_ps_timeout hardware configuration value and use it that value
- * whenever %IEEE80211_CONF_PS is set. In this case mac80211 will disable
- * dynamic PS feature in stack and will just keep %IEEE80211_CONF_PS
+ * whenever %MAC80211_CONF_PS is set. In this case mac80211 will disable
+ * dynamic PS feature in stack and will just keep %MAC80211_CONF_PS
* enabled whenever user has enabled powersave.
*
* Some hardware need to toggle a single shared antenna between WLAN and
@@ -1376,14 +1378,14 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* temporarily set to zero until the driver re-enables dynamic powersave.
*
* Driver informs U-APSD client support by enabling
- * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the
+ * %MAC80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the
* uapsd paramater in conf_tx() operation. Hardware needs to send the QoS
* Nullfunc frames and stay awake until the service period has ended. To
* utilize U-APSD, dynamic powersave is disabled for voip AC and all frames
* from that AC are transmitted with powersave enabled.
*
* Note: U-APSD client mode is not yet supported with
- * %IEEE80211_HW_PS_NULLFUNC_STACK.
+ * %MAC80211_HW_PS_NULLFUNC_STACK.
*/
/**
@@ -1397,15 +1399,15 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
* way the host will only receive beacons where some relevant information
* (for example ERP protection or WMM settings) have changed.
*
- * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER
+ * Beacon filter support is advertised with the %MAC80211_HW_BEACON_FILTER
* hardware capability. The driver needs to enable beacon filter support
- * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When
+ * whenever power save is enabled, that is %MAC80211_CONF_PS is set. When
* power save is enabled, the stack will not check for beacon loss and the
- * driver needs to notify about loss of beacons with ieee80211_beacon_loss().
+ * driver needs to notify about loss of beacons with mac80211_beacon_loss().
*
* The time (or number of beacons missed) until the firmware notifies the
* driver of a beacon loss event (which in turn causes the driver to call
- * ieee80211_beacon_loss()) should be configurable and will be controlled
+ * mac80211_beacon_loss()) should be configurable and will be controlled
* by mac80211 and the roaming algorithm in the future.
*
* Since there may be constantly changing information elements that nothing
@@ -1512,7 +1514,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
*/
/**
- * enum ieee80211_filter_flags - hardware filter flags
+ * enum mac80211_filter_flags - hardware filter flags
*
* These flags determine what the filter in hardware should be
* programmed to let through and what should not be passed to the
@@ -1549,7 +1551,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
*
* @FIF_PROBE_REQ: pass probe request frames
*/
-enum ieee80211_filter_flags {
+enum mac80211_filter_flags {
FIF_PROMISC_IN_BSS = 1<<0,
FIF_ALLMULTI = 1<<1,
FIF_FCSFAIL = 1<<2,
@@ -1562,32 +1564,32 @@ enum ieee80211_filter_flags {
};
/**
- * enum ieee80211_ampdu_mlme_action - A-MPDU actions
+ * enum mac80211_ampdu_mlme_action - A-MPDU actions
*
* These flags are used with the ampdu_action() callback in
- * &struct ieee80211_ops to indicate which action is needed.
+ * &struct mac80211_ops to indicate which action is needed.
*
* Note that drivers MUST be able to deal with a TX aggregation
* session being stopped even before they OK'ed starting it by
- * calling ieee80211_start_tx_ba_cb_irqsafe, because the peer
+ * calling mac80211_start_tx_ba_cb_irqsafe, because the peer
* might receive the addBA frame and send a delBA right away!
*
- * @IEEE80211_AMPDU_RX_START: start Rx aggregation
- * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation
- * @IEEE80211_AMPDU_TX_START: start Tx aggregation
- * @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation
- * @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational
- */
-enum ieee80211_ampdu_mlme_action {
- IEEE80211_AMPDU_RX_START,
- IEEE80211_AMPDU_RX_STOP,
- IEEE80211_AMPDU_TX_START,
- IEEE80211_AMPDU_TX_STOP,
- IEEE80211_AMPDU_TX_OPERATIONAL,
+ * @MAC80211_AMPDU_RX_START: start Rx aggregation
+ * @MAC80211_AMPDU_RX_STOP: stop Rx aggregation
+ * @MAC80211_AMPDU_TX_START: start Tx aggregation
+ * @MAC80211_AMPDU_TX_STOP: stop Tx aggregation
+ * @MAC80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational
+ */
+enum mac80211_ampdu_mlme_action {
+ MAC80211_AMPDU_RX_START,
+ MAC80211_AMPDU_RX_STOP,
+ MAC80211_AMPDU_TX_START,
+ MAC80211_AMPDU_TX_STOP,
+ MAC80211_AMPDU_TX_OPERATIONAL,
};
/**
- * struct ieee80211_ops - callbacks from mac80211 to the driver
+ * struct mac80211_ops - callbacks from mac80211 to the driver
*
* This structure contains various callbacks that the driver may
* handle or, in some cases, must handle, for example to configure
@@ -1691,7 +1693,7 @@ enum ieee80211_ampdu_mlme_action {
*
* @update_tkip_key: See the section "Hardware crypto acceleration"
* This callback will be called in the context of Rx. Called for drivers
- * which set IEEE80211_KEY_FLAG_TKIP_REQ_RX_P1_KEY.
+ * which set MAC80211_KEY_FLAG_TKIP_REQ_RX_P1_KEY.
* The callback must be atomic.
*
* @hw_scan: Ask the hardware to service the scan request, no need to start
@@ -1703,14 +1705,14 @@ enum ieee80211_ampdu_mlme_action {
* entire IEs after the SSID, so that drivers need not look at these
* at all but just send them after the SSID -- mac80211 includes the
* (extended) supported rates and HT information (where applicable).
- * When the scan finishes, ieee80211_scan_completed() must be called;
+ * When the scan finishes, mac80211_scan_completed() must be called;
* note that it also must be called when the scan cannot finish due to
* any error unless this callback returned a negative error code.
* The callback can sleep.
*
* @sched_scan_start: Ask the hardware to start scanning repeatedly at
* specific intervals. The driver must call the
- * ieee80211_sched_scan_results() function whenever it finds results.
+ * mac80211_sched_scan_results() function whenever it finds results.
* This process will continue until sched_scan_stop is called.
*
* @sched_scan_stop: Tell the hardware to stop an ongoing scheduled scan.
@@ -1750,7 +1752,7 @@ enum ieee80211_ampdu_mlme_action {
* @sta_notify: Notifies low level driver about power state transition of an
* associated station, AP, IBSS/WDS/mesh peer etc. For a VIF operating
* in AP mode, this callback will not be called when the flag
- * %IEEE80211_HW_AP_LINK_PS is set. Must be atomic.
+ * %MAC80211_HW_AP_LINK_PS is set. Must be atomic.
*
* @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
* bursting) for a hardware TX queue.
@@ -1782,11 +1784,11 @@ enum ieee80211_ampdu_mlme_action {
* @ampdu_action: Perform a certain A-MPDU action
* The RA/TID combination determines the destination and TID we want
* the ampdu action to be performed for. The action is defined through
- * ieee80211_ampdu_mlme_action. Starting sequence number (@ssn)
+ * mac80211_ampdu_mlme_action. Starting sequence number (@ssn)
* is the first frame we expect to perform the action on. Notice
* that TX/RX_STOP can pass NULL for this parameter.
* The @buf_size parameter is only valid when the action is set to
- * %IEEE80211_AMPDU_TX_OPERATIONAL and indicates the peer's reorder
+ * %MAC80211_AMPDU_TX_OPERATIONAL and indicates the peer's reorder
* buffer size (number of subframes) for this session -- the driver
* may neither send aggregates containing more subframes than this
* nor send aggregates in a way that lost frames would exceed the
@@ -1823,7 +1825,7 @@ enum ieee80211_ampdu_mlme_action {
*
* @channel_switch: Drivers that need (or want) to offload the channel
* switch operation for CSAs received from the AP may implement this
- * callback. They must then call ieee80211_chswitch_done() to indicate
+ * callback. They must then call mac80211_chswitch_done() to indicate
* completion of the channel switch.
*
* @napi_poll: Poll Rx queue for incoming data frames.
@@ -1836,12 +1838,12 @@ enum ieee80211_ampdu_mlme_action {
* @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
*
* @remain_on_channel: Starts an off-channel period on the given channel, must
- * call back to ieee80211_ready_on_channel() when on that channel. Note
+ * call back to mac80211_ready_on_channel() when on that channel. Note
* that normal channel traffic is not stopped as this is intended for hw
* offload. Frames to transmit on the off-channel channel are transmitted
- * normally except for the %IEEE80211_TX_CTL_TX_OFFCHAN flag. When the
+ * normally except for the %MAC80211_TX_CTL_TX_OFFCHAN flag. When the
* duration (which will always be non-zero) expires, the driver must call
- * ieee80211_remain_on_channel_expired(). This callback may sleep.
+ * mac80211_remain_on_channel_expired(). This callback may sleep.
* @cancel_remain_on_channel: Requests that an ongoing off-channel period is
* aborted before it expires. This callback may sleep.
* @offchannel_tx: Transmit frame on another channel, wait for a response
@@ -1861,169 +1863,169 @@ enum ieee80211_ampdu_mlme_action {
* when transmitting a frame. Currently only legacy rates are handled.
* The callback can sleep.
*/
-struct ieee80211_ops {
- void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
- int (*start)(struct ieee80211_hw *hw);
- void (*stop)(struct ieee80211_hw *hw);
+struct mac80211_ops {
+ void (*tx)(struct mac80211_hw *hw, struct sk_buff *skb);
+ int (*start)(struct mac80211_hw *hw);
+ void (*stop)(struct mac80211_hw *hw);
#ifdef CONFIG_PM
- int (*suspend)(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan);
- int (*resume)(struct ieee80211_hw *hw);
+ int (*suspend)(struct mac80211_hw *hw, struct cfg80211_wowlan *wowlan);
+ int (*resume)(struct mac80211_hw *hw);
#endif
- int (*add_interface)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
- int (*change_interface)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
+ int (*add_interface)(struct mac80211_hw *hw,
+ struct mac80211_vif *vif);
+ int (*change_interface)(struct mac80211_hw *hw,
+ struct mac80211_vif *vif,
enum nl80211_iftype new_type, bool p2p);
- void (*remove_interface)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
- int (*config)(struct ieee80211_hw *hw, u32 changed);
- void (*bss_info_changed)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *info,
+ void (*remove_interface)(struct mac80211_hw *hw,
+ struct mac80211_vif *vif);
+ int (*config)(struct mac80211_hw *hw, u32 changed);
+ void (*bss_info_changed)(struct mac80211_hw *hw,
+ struct mac80211_vif *vif,
+ struct mac80211_bss_conf *info,
u32 changed);
- u64 (*prepare_multicast)(struct ieee80211_hw *hw,
+ u64 (*prepare_multicast)(struct mac80211_hw *hw,
struct netdev_hw_addr_list *mc_list);
- void (*configure_filter)(struct ieee80211_hw *hw,
+ void (*configure_filter)(struct mac80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast);
- int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
+ int (*set_tim)(struct mac80211_hw *hw, struct mac80211_sta *sta,
bool set);
- int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif, struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key);
- void (*update_tkip_key)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_key_conf *conf,
- struct ieee80211_sta *sta,
+ int (*set_key)(struct mac80211_hw *hw, enum set_key_cmd cmd,
+ struct mac80211_vif *vif, struct mac80211_sta *sta,
+ struct mac80211_key_conf *key);
+ void (*update_tkip_key)(struct mac80211_hw *hw,
+ struct mac80211_vif *vif,
+ struct mac80211_key_conf *conf,
+ struct mac80211_sta *sta,
u32 iv32, u16 *phase1key);
- int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ int (*hw_scan)(struct mac80211_hw *hw, struct mac80211_vif *vif,
struct cfg80211_scan_request *req);
- int (*sched_scan_start)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
+ int (*sched_scan_start)(struct mac80211_hw *hw,
+ struct mac80211_vif *vif,
struct cfg80211_sched_scan_request *req,
- struct ieee80211_sched_scan_ies *ies);
- void (*sched_scan_stop)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
- void (*sw_scan_start)(struct ieee80211_hw *hw);
- void (*sw_scan_complete)(struct ieee80211_hw *hw);
- int (*get_stats)(struct ieee80211_hw *hw,
- struct ieee80211_low_level_stats *stats);
- void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx,
+ struct mac80211_sched_scan_ies *ies);
+ void (*sched_scan_stop)(struct mac80211_hw *hw,
+ struct mac80211_vif *vif);
+ void (*sw_scan_start)(struct mac80211_hw *hw);
+ void (*sw_scan_complete)(struct mac80211_hw *hw);
+ int (*get_stats)(struct mac80211_hw *hw,
+ struct mac80211_low_level_stats *stats);
+ void (*get_tkip_seq)(struct mac80211_hw *hw, u8 hw_key_idx,
u32 *iv32, u16 *iv16);
- int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value);
- int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value);
- int (*sta_add)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- struct ieee80211_sta *sta);
- int (*sta_remove)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- struct ieee80211_sta *sta);
- void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- enum sta_notify_cmd, struct ieee80211_sta *sta);
- int (*conf_tx)(struct ieee80211_hw *hw, u16 queue,
- const struct ieee80211_tx_queue_params *params);
- u64 (*get_tsf)(struct ieee80211_hw *hw);
- void (*set_tsf)(struct ieee80211_hw *hw, u64 tsf);
- void (*reset_tsf)(struct ieee80211_hw *hw);
- int (*tx_last_beacon)(struct ieee80211_hw *hw);
- int (*ampdu_action)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+ int (*set_frag_threshold)(struct mac80211_hw *hw, u32 value);
+ int (*set_rts_threshold)(struct mac80211_hw *hw, u32 value);
+ int (*sta_add)(struct mac80211_hw *hw, struct mac80211_vif *vif,
+ struct mac80211_sta *sta);
+ int (*sta_remove)(struct mac80211_hw *hw, struct mac80211_vif *vif,
+ struct mac80211_sta *sta);
+ void (*sta_notify)(struct mac80211_hw *hw, struct mac80211_vif *vif,
+ enum sta_notify_cmd, struct mac80211_sta *sta);
+ int (*conf_tx)(struct mac80211_hw *hw, u16 queue,
+ const struct mac80211_tx_queue_params *params);
+ u64 (*get_tsf)(struct mac80211_hw *hw);
+ void (*set_tsf)(struct mac80211_hw *hw, u64 tsf);
+ void (*reset_tsf)(struct mac80211_hw *hw);
+ int (*tx_last_beacon)(struct mac80211_hw *hw);
+ int (*ampdu_action)(struct mac80211_hw *hw,
+ struct mac80211_vif *vif,
+ enum mac80211_ampdu_mlme_action action,
+ struct mac80211_sta *sta, u16 tid, u16 *ssn,
u8 buf_size);
- int (*get_survey)(struct ieee80211_hw *hw, int idx,
+ int (*get_survey)(struct mac80211_hw *hw, int idx,
struct survey_info *survey);
- void (*rfkill_poll)(struct ieee80211_hw *hw);
- void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class);
+ void (*rfkill_poll)(struct mac80211_hw *hw);
+ void (*set_coverage_class)(struct mac80211_hw *hw, u8 coverage_class);
#ifdef CONFIG_NL80211_TESTMODE
- int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len);
+ int (*testmode_cmd)(struct mac80211_hw *hw, void *data, int len);
#endif
- void (*flush)(struct ieee80211_hw *hw, bool drop);
- void (*channel_switch)(struct ieee80211_hw *hw,
- struct ieee80211_channel_switch *ch_switch);
- int (*napi_poll)(struct ieee80211_hw *hw, int budget);
- int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
- int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
-
- int (*remain_on_channel)(struct ieee80211_hw *hw,
+ void (*flush)(struct mac80211_hw *hw, bool drop);
+ void (*channel_switch)(struct mac80211_hw *hw,
+ struct mac80211_channel_switch *ch_switch);
+ int (*napi_poll)(struct mac80211_hw *hw, int budget);
+ int (*set_antenna)(struct mac80211_hw *hw, u32 tx_ant, u32 rx_ant);
+ int (*get_antenna)(struct mac80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
+
+ int (*remain_on_channel)(struct mac80211_hw *hw,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type,
int duration);
- int (*cancel_remain_on_channel)(struct ieee80211_hw *hw);
- int (*offchannel_tx)(struct ieee80211_hw *hw, struct sk_buff *skb,
+ int (*cancel_remain_on_channel)(struct mac80211_hw *hw);
+ int (*offchannel_tx)(struct mac80211_hw *hw, struct sk_buff *skb,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type,
unsigned int wait);
- int (*offchannel_tx_cancel_wait)(struct ieee80211_hw *hw);
- int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx);
- void (*get_ringparam)(struct ieee80211_hw *hw,
+ int (*offchannel_tx_cancel_wait)(struct mac80211_hw *hw);
+ int (*set_ringparam)(struct mac80211_hw *hw, u32 tx, u32 rx);
+ void (*get_ringparam)(struct mac80211_hw *hw,
u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
- bool (*tx_frames_pending)(struct ieee80211_hw *hw);
- int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ bool (*tx_frames_pending)(struct mac80211_hw *hw);
+ int (*set_bitrate_mask)(struct mac80211_hw *hw, struct mac80211_vif *vif,
const struct cfg80211_bitrate_mask *mask);
};
/**
- * ieee80211_alloc_hw - Allocate a new hardware device
+ * mac80211_alloc_hw - Allocate a new hardware device
*
* This must be called once for each hardware device. The returned pointer
* must be used to refer to this device when calling other functions.
* mac80211 allocates a private data area for the driver pointed to by
- * @priv in &struct ieee80211_hw, the size of this area is given as
+ * @priv in &struct mac80211_hw, the size of this area is given as
* @priv_data_len.
*
* @priv_data_len: length of private data
* @ops: callbacks for this device
*/
-struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
- const struct ieee80211_ops *ops);
+struct mac80211_hw *mac80211_alloc_hw(size_t priv_data_len,
+ const struct mac80211_ops *ops);
/**
- * ieee80211_register_hw - Register hardware device
+ * mac80211_register_hw - Register hardware device
*
* You must call this function before any other functions in
* mac80211. Note that before a hardware can be registered, you
* need to fill the contained wiphy's information.
*
- * @hw: the device to register as returned by ieee80211_alloc_hw()
+ * @hw: the device to register as returned by mac80211_alloc_hw()
*/
-int ieee80211_register_hw(struct ieee80211_hw *hw);
+int mac80211_register_hw(struct mac80211_hw *hw);
/**
- * struct ieee80211_tpt_blink - throughput blink description
+ * struct mac80211_tpt_blink - throughput blink description
* @throughput: throughput in Kbit/sec
* @blink_time: blink time in milliseconds
* (full cycle, ie. one off + one on period)
*/
-struct ieee80211_tpt_blink {
+struct mac80211_tpt_blink {
int throughput;
int blink_time;
};
/**
- * enum ieee80211_tpt_led_trigger_flags - throughput trigger flags
- * @IEEE80211_TPT_LEDTRIG_FL_RADIO: enable blinking with radio
- * @IEEE80211_TPT_LEDTRIG_FL_WORK: enable blinking when working
- * @IEEE80211_TPT_LEDTRIG_FL_CONNECTED: enable blinking when at least one
+ * enum mac80211_tpt_led_trigger_flags - throughput trigger flags
+ * @MAC80211_TPT_LEDTRIG_FL_RADIO: enable blinking with radio
+ * @MAC80211_TPT_LEDTRIG_FL_WORK: enable blinking when working
+ * @MAC80211_TPT_LEDTRIG_FL_CONNECTED: enable blinking when at least one
* interface is connected in some way, including being an AP
*/
-enum ieee80211_tpt_led_trigger_flags {
- IEEE80211_TPT_LEDTRIG_FL_RADIO = BIT(0),
- IEEE80211_TPT_LEDTRIG_FL_WORK = BIT(1),
- IEEE80211_TPT_LEDTRIG_FL_CONNECTED = BIT(2),
+enum mac80211_tpt_led_trigger_flags {
+ MAC80211_TPT_LEDTRIG_FL_RADIO = BIT(0),
+ MAC80211_TPT_LEDTRIG_FL_WORK = BIT(1),
+ MAC80211_TPT_LEDTRIG_FL_CONNECTED = BIT(2),
};
#ifdef CONFIG_MAC80211_LEDS
-extern char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw);
-extern char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw);
-extern char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw);
-extern char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw);
-extern char *__ieee80211_create_tpt_led_trigger(
- struct ieee80211_hw *hw, unsigned int flags,
- const struct ieee80211_tpt_blink *blink_table,
+extern char *__mac80211_get_tx_led_name(struct mac80211_hw *hw);
+extern char *__mac80211_get_rx_led_name(struct mac80211_hw *hw);
+extern char *__mac80211_get_assoc_led_name(struct mac80211_hw *hw);
+extern char *__mac80211_get_radio_led_name(struct mac80211_hw *hw);
+extern char *__mac80211_create_tpt_led_trigger(
+ struct mac80211_hw *hw, unsigned int flags,
+ const struct mac80211_tpt_blink *blink_table,
unsigned int blink_table_len);
#endif
/**
- * ieee80211_get_tx_led_name - get name of TX LED
+ * mac80211_get_tx_led_name - get name of TX LED
*
* mac80211 creates a transmit LED trigger for each wireless hardware
* that can be used to drive LEDs if your driver registers a LED device.
@@ -2032,17 +2034,17 @@ extern char *__ieee80211_create_tpt_led_trigger(
*
* @hw: the hardware to get the LED trigger name for
*/
-static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
+static inline char *mac80211_get_tx_led_name(struct mac80211_hw *hw)
{
#ifdef CONFIG_MAC80211_LEDS
- return __ieee80211_get_tx_led_name(hw);
+ return __mac80211_get_tx_led_name(hw);
#else
return NULL;
#endif
}
/**
- * ieee80211_get_rx_led_name - get name of RX LED
+ * mac80211_get_rx_led_name - get name of RX LED
*
* mac80211 creates a receive LED trigger for each wireless hardware
* that can be used to drive LEDs if your driver registers a LED device.
@@ -2051,17 +2053,17 @@ static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
*
* @hw: the hardware to get the LED trigger name for
*/
-static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
+static inline char *mac80211_get_rx_led_name(struct mac80211_hw *hw)
{
#ifdef CONFIG_MAC80211_LEDS
- return __ieee80211_get_rx_led_name(hw);
+ return __mac80211_get_rx_led_name(hw);
#else
return NULL;
#endif
}
/**
- * ieee80211_get_assoc_led_name - get name of association LED
+ * mac80211_get_assoc_led_name - get name of association LED
*
* mac80211 creates a association LED trigger for each wireless hardware
* that can be used to drive LEDs if your driver registers a LED device.
@@ -2070,17 +2072,17 @@ static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
*
* @hw: the hardware to get the LED trigger name for
*/
-static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
+static inline char *mac80211_get_assoc_led_name(struct mac80211_hw *hw)
{
#ifdef CONFIG_MAC80211_LEDS
- return __ieee80211_get_assoc_led_name(hw);
+ return __mac80211_get_assoc_led_name(hw);
#else
return NULL;
#endif
}
/**
- * ieee80211_get_radio_led_name - get name of radio LED
+ * mac80211_get_radio_led_name - get name of radio LED
*
* mac80211 creates a radio change LED trigger for each wireless hardware
* that can be used to drive LEDs if your driver registers a LED device.
@@ -2089,33 +2091,33 @@ static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
*
* @hw: the hardware to get the LED trigger name for
*/
-static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
+static inline char *mac80211_get_radio_led_name(struct mac80211_hw *hw)
{
#ifdef CONFIG_MAC80211_LEDS
- return __ieee80211_get_radio_led_name(hw);
+ return __mac80211_get_radio_led_name(hw);
#else
return NULL;
#endif
}
/**
- * ieee80211_create_tpt_led_trigger - create throughput LED trigger
+ * mac80211_create_tpt_led_trigger - create throughput LED trigger
* @hw: the hardware to create the trigger for
- * @flags: trigger flags, see &enum ieee80211_tpt_led_trigger_flags
+ * @flags: trigger flags, see &enum mac80211_tpt_led_trigger_flags
* @blink_table: the blink table -- needs to be ordered by throughput
* @blink_table_len: size of the blink table
*
* This function returns %NULL (in case of error, or if no LED
* triggers are configured) or the name of the new trigger.
- * This function must be called before ieee80211_register_hw().
+ * This function must be called before mac80211_register_hw().
*/
static inline char *
-ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
- const struct ieee80211_tpt_blink *blink_table,
+mac80211_create_tpt_led_trigger(struct mac80211_hw *hw, unsigned int flags,
+ const struct mac80211_tpt_blink *blink_table,
unsigned int blink_table_len)
{
#ifdef CONFIG_MAC80211_LEDS
- return __ieee80211_create_tpt_led_trigger(hw, flags, blink_table,
+ return __mac80211_create_tpt_led_trigger(hw, flags, blink_table,
blink_table_len);
#else
return NULL;
@@ -2123,28 +2125,28 @@ ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
}
/**
- * ieee80211_unregister_hw - Unregister a hardware device
+ * mac80211_unregister_hw - Unregister a hardware device
*
* This function instructs mac80211 to free allocated resources
* and unregister netdevices from the networking subsystem.
*
* @hw: the hardware to unregister
*/
-void ieee80211_unregister_hw(struct ieee80211_hw *hw);
+void mac80211_unregister_hw(struct mac80211_hw *hw);
/**
- * ieee80211_free_hw - free hardware descriptor
+ * mac80211_free_hw - free hardware descriptor
*
* This function frees everything that was allocated, including the
- * private data for the driver. You must call ieee80211_unregister_hw()
+ * private data for the driver. You must call mac80211_unregister_hw()
* before calling this function.
*
* @hw: the hardware to free
*/
-void ieee80211_free_hw(struct ieee80211_hw *hw);
+void mac80211_free_hw(struct mac80211_hw *hw);
/**
- * ieee80211_restart_hw - restart hardware completely
+ * mac80211_restart_hw - restart hardware completely
*
* Call this function when the hardware was restarted for some reason
* (hardware error, ...) and the driver is unable to restore its state
@@ -2155,83 +2157,83 @@ void ieee80211_free_hw(struct ieee80211_hw *hw);
*
* @hw: the hardware to restart
*/
-void ieee80211_restart_hw(struct ieee80211_hw *hw);
+void mac80211_restart_hw(struct mac80211_hw *hw);
-/** ieee80211_napi_schedule - schedule NAPI poll
+/** mac80211_napi_schedule - schedule NAPI poll
*
* Use this function to schedule NAPI polling on a device.
*
* @hw: the hardware to start polling
*/
-void ieee80211_napi_schedule(struct ieee80211_hw *hw);
+void mac80211_napi_schedule(struct mac80211_hw *hw);
-/** ieee80211_napi_complete - complete NAPI polling
+/** mac80211_napi_complete - complete NAPI polling
*
* Use this function to finish NAPI polling on a device.
*
* @hw: the hardware to stop polling
*/
-void ieee80211_napi_complete(struct ieee80211_hw *hw);
+void mac80211_napi_complete(struct mac80211_hw *hw);
/**
- * ieee80211_rx - receive frame
+ * mac80211_rx - receive frame
*
* Use this function to hand received frames to mac80211. The receive
* buffer in @skb must start with an IEEE 802.11 header. In case of a
- * paged @skb is used, the driver is recommended to put the ieee80211
+ * paged @skb is used, the driver is recommended to put the mac80211
* header of the frame on the linear part of the @skb to avoid memory
* allocation and/or memcpy by the stack.
*
* This function may not be called in IRQ context. Calls to this function
* for a single hardware must be synchronized against each other. Calls to
- * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be
+ * this function, mac80211_rx_ni() and mac80211_rx_irqsafe() may not be
* mixed for a single hardware.
*
- * In process context use instead ieee80211_rx_ni().
+ * In process context use instead mac80211_rx_ni().
*
* @hw: the hardware this frame came in on
* @skb: the buffer to receive, owned by mac80211 after this call
*/
-void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb);
+void mac80211_rx(struct mac80211_hw *hw, struct sk_buff *skb);
/**
- * ieee80211_rx_irqsafe - receive frame
+ * mac80211_rx_irqsafe - receive frame
*
- * Like ieee80211_rx() but can be called in IRQ context
+ * Like mac80211_rx() but can be called in IRQ context
* (internally defers to a tasklet.)
*
- * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not
+ * Calls to this function, mac80211_rx() or mac80211_rx_ni() may not
* be mixed for a single hardware.
*
* @hw: the hardware this frame came in on
* @skb: the buffer to receive, owned by mac80211 after this call
*/
-void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb);
+void mac80211_rx_irqsafe(struct mac80211_hw *hw, struct sk_buff *skb);
/**
- * ieee80211_rx_ni - receive frame (in process context)
+ * mac80211_rx_ni - receive frame (in process context)
*
- * Like ieee80211_rx() but can be called in process context
+ * Like mac80211_rx() but can be called in process context
* (internally disables bottom halves).
*
- * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may
+ * Calls to this function, mac80211_rx() and mac80211_rx_irqsafe() may
* not be mixed for a single hardware.
*
* @hw: the hardware this frame came in on
* @skb: the buffer to receive, owned by mac80211 after this call
*/
-static inline void ieee80211_rx_ni(struct ieee80211_hw *hw,
+static inline void mac80211_rx_ni(struct mac80211_hw *hw,
struct sk_buff *skb)
{
local_bh_disable();
- ieee80211_rx(hw, skb);
+ mac80211_rx(hw, skb);
local_bh_enable();
}
/**
- * ieee80211_sta_ps_transition - PS transition for connected sta
+ * mac80211_sta_ps_transition - PS transition for connected sta
*
- * When operating in AP mode with the %IEEE80211_HW_AP_LINK_PS
+ * When operating in AP mode with the %MAC80211_HW_AP_LINK_PS
* flag set, use this function to inform mac80211 about a connected station
* entering/leaving PS mode.
*
@@ -2245,26 +2247,26 @@ static inline void ieee80211_rx_ni(struct ieee80211_hw *hw,
* @sta: currently connected sta
* @start: start or stop PS
*/
-int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
+int mac80211_sta_ps_transition(struct mac80211_sta *sta, bool start);
/**
- * ieee80211_sta_ps_transition_ni - PS transition for connected sta
+ * mac80211_sta_ps_transition_ni - PS transition for connected sta
* (in process context)
*
- * Like ieee80211_sta_ps_transition() but can be called in process context
+ * Like mac80211_sta_ps_transition() but can be called in process context
* (internally disables bottom halves). Concurrent call restriction still
* applies.
*
* @sta: currently connected sta
* @start: start or stop PS
*/
-static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
+static inline int mac80211_sta_ps_transition_ni(struct mac80211_sta *sta,
bool start)
{
int ret;
local_bh_disable();
- ret = ieee80211_sta_ps_transition(sta, start);
+ ret = mac80211_sta_ps_transition(sta, start);
local_bh_enable();
return ret;
@@ -2274,11 +2276,11 @@ static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
* The TX headroom reserved by mac80211 for its own tx_status functions.
* This is enough for the radiotap header.
*/
-#define IEEE80211_TX_STATUS_HEADROOM 13
+#define MAC80211_TX_STATUS_HEADROOM 13
/**
- * ieee80211_sta_set_tim - set the TIM bit for a sleeping station
- * @sta: &struct ieee80211_sta pointer for the sleeping station
+ * mac80211_sta_set_tim - set the TIM bit for a sleeping station
+ * @sta: &struct mac80211_sta pointer for the sleeping station
*
* If a driver buffers frames for a powersave station instead of passing
* them back to mac80211 for retransmission, the station needs to be told
@@ -2287,10 +2289,10 @@ static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
* This function sets the station's TIM bit - it will be cleared when the
* station wakes up.
*/
-void ieee80211_sta_set_tim(struct ieee80211_sta *sta);
+void mac80211_sta_set_tim(struct mac80211_sta *sta);
/**
- * ieee80211_tx_status - transmit status callback
+ * mac80211_tx_status - transmit status callback
*
* Call this function for all transmitted frames after they have been
* transmitted. It is permissible to not call this function for
@@ -2298,52 +2300,52 @@ void ieee80211_sta_set_tim(struct ieee80211_sta *sta);
*
* This function may not be called in IRQ context. Calls to this function
* for a single hardware must be synchronized against each other. Calls
- * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe()
+ * to this function, mac80211_tx_status_ni() and mac80211_tx_status_irqsafe()
* may not be mixed for a single hardware.
*
* @hw: the hardware the frame was transmitted by
* @skb: the frame that was transmitted, owned by mac80211 after this call
*/
-void ieee80211_tx_status(struct ieee80211_hw *hw,
+void mac80211_tx_status(struct mac80211_hw *hw,
struct sk_buff *skb);
/**
- * ieee80211_tx_status_ni - transmit status callback (in process context)
+ * mac80211_tx_status_ni - transmit status callback (in process context)
*
- * Like ieee80211_tx_status() but can be called in process context.
+ * Like mac80211_tx_status() but can be called in process context.
*
- * Calls to this function, ieee80211_tx_status() and
- * ieee80211_tx_status_irqsafe() may not be mixed
+ * Calls to this function, mac80211_tx_status() and
+ * mac80211_tx_status_irqsafe() may not be mixed
* for a single hardware.
*
* @hw: the hardware the frame was transmitted by
* @skb: the frame that was transmitted, owned by mac80211 after this call
*/
-static inline void ieee80211_tx_status_ni(struct ieee80211_hw *hw,
+static inline void mac80211_tx_status_ni(struct mac80211_hw *hw,
struct sk_buff *skb)
{
local_bh_disable();
- ieee80211_tx_status(hw, skb);
+ mac80211_tx_status(hw, skb);
local_bh_enable();
}
/**
- * ieee80211_tx_status_irqsafe - IRQ-safe transmit status callback
+ * mac80211_tx_status_irqsafe - IRQ-safe transmit status callback
*
- * Like ieee80211_tx_status() but can be called in IRQ context
+ * Like mac80211_tx_status() but can be called in IRQ context
* (internally defers to a tasklet.)
*
- * Calls to this function, ieee80211_tx_status() and
- * ieee80211_tx_status_ni() may not be mixed for a single hardware.
+ * Calls to this function, mac80211_tx_status() and
+ * mac80211_tx_status_ni() may not be mixed for a single hardware.
*
* @hw: the hardware the frame was transmitted by
* @skb: the frame that was transmitted, owned by mac80211 after this call
*/
-void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
+void mac80211_tx_status_irqsafe(struct mac80211_hw *hw,
struct sk_buff *skb);
/**
- * ieee80211_report_low_ack - report non-responding station
+ * mac80211_report_low_ack - report non-responding station
*
* When operating in AP-mode, call this function to report a non-responding
* connected STA.
@@ -2351,12 +2353,12 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
* @sta: the non-responding connected sta
* @num_packets: number of packets sent to @sta without a response
*/
-void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
+void mac80211_report_low_ack(struct mac80211_sta *sta, u32 num_packets);
/**
- * ieee80211_beacon_get_tim - beacon generation function
- * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_beacon_get_tim - beacon generation function
+ * @hw: pointer obtained from mac80211_alloc_hw().
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
* @tim_offset: pointer to variable that will receive the TIM IE offset.
* Set to 0 if invalid (in non-AP modes).
* @tim_length: pointer to variable that will receive the TIM IE length,
@@ -2377,57 +2379,57 @@ void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
*
* The driver is responsible for freeing the returned skb.
*/
-struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
+struct sk_buff *mac80211_beacon_get_tim(struct mac80211_hw *hw,
+ struct mac80211_vif *vif,
u16 *tim_offset, u16 *tim_length);
/**
- * ieee80211_beacon_get - beacon generation function
- * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_beacon_get - beacon generation function
+ * @hw: pointer obtained from mac80211_alloc_hw().
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
*
- * See ieee80211_beacon_get_tim().
+ * See mac80211_beacon_get_tim().
*/
-static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
+static inline struct sk_buff *mac80211_beacon_get(struct mac80211_hw *hw,
+ struct mac80211_vif *vif)
{
- return ieee80211_beacon_get_tim(hw, vif, NULL, NULL);
+ return mac80211_beacon_get_tim(hw, vif, NULL, NULL);
}
/**
- * ieee80211_pspoll_get - retrieve a PS Poll template
- * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_pspoll_get - retrieve a PS Poll template
+ * @hw: pointer obtained from mac80211_alloc_hw().
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
*
* Creates a PS Poll a template which can, for example, uploaded to
* hardware. The template must be updated after association so that correct
* AID, BSSID and MAC address is used.
*
* Note: Caller (or hardware) is responsible for setting the
- * &IEEE80211_FCTL_PM bit.
+ * &MAC80211_FCTL_PM bit.
*/
-struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
+struct sk_buff *mac80211_pspoll_get(struct mac80211_hw *hw,
+ struct mac80211_vif *vif);
/**
- * ieee80211_nullfunc_get - retrieve a nullfunc template
- * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_nullfunc_get - retrieve a nullfunc template
+ * @hw: pointer obtained from mac80211_alloc_hw().
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
*
* Creates a Nullfunc template which can, for example, uploaded to
* hardware. The template must be updated after association so that correct
* BSSID and address is used.
*
* Note: Caller (or hardware) is responsible for setting the
- * &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields.
+ * &MAC80211_FCTL_PM bit as well as Duration and Sequence Control fields.
*/
-struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
+struct sk_buff *mac80211_nullfunc_get(struct mac80211_hw *hw,
+ struct mac80211_vif *vif);
/**
- * ieee80211_probereq_get - retrieve a Probe Request template
- * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_probereq_get - retrieve a Probe Request template
+ * @hw: pointer obtained from mac80211_alloc_hw().
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
* @ssid: SSID buffer
* @ssid_len: length of SSID
* @ie: buffer containing all IEs except SSID for the template
@@ -2436,18 +2438,18 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
* Creates a Probe Request template which can, for example, be uploaded to
* hardware.
*/
-struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
+struct sk_buff *mac80211_probereq_get(struct mac80211_hw *hw,
+ struct mac80211_vif *vif,
const u8 *ssid, size_t ssid_len,
const u8 *ie, size_t ie_len);
/**
- * ieee80211_rts_get - RTS frame generation function
- * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_rts_get - RTS frame generation function
+ * @hw: pointer obtained from mac80211_alloc_hw().
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
* @frame: pointer to the frame that is going to be protected by the RTS.
* @frame_len: the frame length (in octets).
- * @frame_txctl: &struct ieee80211_tx_info of the frame.
+ * @frame_txctl: &struct mac80211_tx_info of the frame.
* @rts: The buffer where to store the RTS frame.
*
* If the RTS frames are generated by the host system (i.e., not in
@@ -2455,33 +2457,33 @@ struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw,
* the next RTS frame from the 802.11 code. The low-level is responsible
* for calling this function before and RTS frame is needed.
*/
-void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+void mac80211_rts_get(struct mac80211_hw *hw, struct mac80211_vif *vif,
const void *frame, size_t frame_len,
- const struct ieee80211_tx_info *frame_txctl,
+ const struct mac80211_tx_info *frame_txctl,
struct ieee80211_rts *rts);
/**
- * ieee80211_rts_duration - Get the duration field for an RTS frame
- * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_rts_duration - Get the duration field for an RTS frame
+ * @hw: pointer obtained from mac80211_alloc_hw().
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
* @frame_len: the length of the frame that is going to be protected by the RTS.
- * @frame_txctl: &struct ieee80211_tx_info of the frame.
+ * @frame_txctl: &struct mac80211_tx_info of the frame.
*
* If the RTS is generated in firmware, but the host system must provide
* the duration field, the low-level driver uses this function to receive
* the duration field value in little-endian byteorder.
*/
-__le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif, size_t frame_len,
- const struct ieee80211_tx_info *frame_txctl);
+__le16 mac80211_rts_duration(struct mac80211_hw *hw,
+ struct mac80211_vif *vif, size_t frame_len,
+ const struct mac80211_tx_info *frame_txctl);
/**
- * ieee80211_ctstoself_get - CTS-to-self frame generation function
- * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_ctstoself_get - CTS-to-self frame generation function
+ * @hw: pointer obtained from mac80211_alloc_hw().
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
* @frame: pointer to the frame that is going to be protected by the CTS-to-self.
* @frame_len: the frame length (in octets).
- * @frame_txctl: &struct ieee80211_tx_info of the frame.
+ * @frame_txctl: &struct mac80211_tx_info of the frame.
* @cts: The buffer where to store the CTS-to-self frame.
*
* If the CTS-to-self frames are generated by the host system (i.e., not in
@@ -2489,47 +2491,47 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
* the next CTS-to-self frame from the 802.11 code. The low-level is responsible
* for calling this function before and CTS-to-self frame is needed.
*/
-void ieee80211_ctstoself_get(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
+void mac80211_ctstoself_get(struct mac80211_hw *hw,
+ struct mac80211_vif *vif,
const void *frame, size_t frame_len,
- const struct ieee80211_tx_info *frame_txctl,
+ const struct mac80211_tx_info *frame_txctl,
struct ieee80211_cts *cts);
/**
- * ieee80211_ctstoself_duration - Get the duration field for a CTS-to-self frame
- * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_ctstoself_duration - Get the duration field for a CTS-to-self frame
+ * @hw: pointer obtained from mac80211_alloc_hw().
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
* @frame_len: the length of the frame that is going to be protected by the CTS-to-self.
- * @frame_txctl: &struct ieee80211_tx_info of the frame.
+ * @frame_txctl: &struct mac80211_tx_info of the frame.
*
* If the CTS-to-self is generated in firmware, but the host system must provide
* the duration field, the low-level driver uses this function to receive
* the duration field value in little-endian byteorder.
*/
-__le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
+__le16 mac80211_ctstoself_duration(struct mac80211_hw *hw,
+ struct mac80211_vif *vif,
size_t frame_len,
- const struct ieee80211_tx_info *frame_txctl);
+ const struct mac80211_tx_info *frame_txctl);
/**
- * ieee80211_generic_frame_duration - Calculate the duration field for a frame
- * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_generic_frame_duration - Calculate the duration field for a frame
+ * @hw: pointer obtained from mac80211_alloc_hw().
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
* @frame_len: the length of the frame.
* @rate: the rate at which the frame is going to be transmitted.
*
* Calculate the duration field of some generic frame, given its
* length and transmission rate (in 100kbps).
*/
-__le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
+__le16 mac80211_generic_frame_duration(struct mac80211_hw *hw,
+ struct mac80211_vif *vif,
size_t frame_len,
struct ieee80211_rate *rate);
/**
- * ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames
- * @hw: pointer as obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_get_buffered_bc - accessing buffered broadcast and multicast frames
+ * @hw: pointer as obtained from mac80211_alloc_hw().
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
*
* Function for accessing buffered broadcast and multicast frames. If
* hardware/firmware does not implement buffering of broadcast/multicast
@@ -2540,17 +2542,17 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
* buffered frames are available.
*
* Note: buffered frames are returned only after DTIM beacon frame was
- * generated with ieee80211_beacon_get() and the low-level driver must thus
- * call ieee80211_beacon_get() first. ieee80211_get_buffered_bc() returns
+ * generated with mac80211_beacon_get() and the low-level driver must thus
+ * call mac80211_beacon_get() first. mac80211_get_buffered_bc() returns
* NULL if the previous generated beacon was not DTIM, so the low-level driver
* does not need to check for DTIM beacons separately and should be able to
* use common code for all beacons.
*/
struct sk_buff *
-ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+mac80211_get_buffered_bc(struct mac80211_hw *hw, struct mac80211_vif *vif);
/**
- * ieee80211_get_tkip_key - get a TKIP rc4 for skb
+ * mac80211_get_tkip_key - get a TKIP rc4 for skb
*
* This function computes a TKIP rc4 key for an skb. It computes
* a phase 1 key if needed (iv16 wraps around). This function is to
@@ -2562,55 +2564,55 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
* @type: TBD
* @key: a buffer to which the key will be written
*/
-void ieee80211_get_tkip_key(struct ieee80211_key_conf *keyconf,
+void mac80211_get_tkip_key(struct mac80211_key_conf *keyconf,
struct sk_buff *skb,
- enum ieee80211_tkip_key_type type, u8 *key);
+ enum mac80211_tkip_key_type type, u8 *key);
/**
- * ieee80211_wake_queue - wake specific queue
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * mac80211_wake_queue - wake specific queue
+ * @hw: pointer as obtained from mac80211_alloc_hw().
* @queue: queue number (counted from zero).
*
* Drivers should use this function instead of netif_wake_queue.
*/
-void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue);
+void mac80211_wake_queue(struct mac80211_hw *hw, int queue);
/**
- * ieee80211_stop_queue - stop specific queue
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * mac80211_stop_queue - stop specific queue
+ * @hw: pointer as obtained from mac80211_alloc_hw().
* @queue: queue number (counted from zero).
*
* Drivers should use this function instead of netif_stop_queue.
*/
-void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
+void mac80211_stop_queue(struct mac80211_hw *hw, int queue);
/**
- * ieee80211_queue_stopped - test status of the queue
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * mac80211_queue_stopped - test status of the queue
+ * @hw: pointer as obtained from mac80211_alloc_hw().
* @queue: queue number (counted from zero).
*
* Drivers should use this function instead of netif_stop_queue.
*/
-int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue);
+int mac80211_queue_stopped(struct mac80211_hw *hw, int queue);
/**
- * ieee80211_stop_queues - stop all queues
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * mac80211_stop_queues - stop all queues
+ * @hw: pointer as obtained from mac80211_alloc_hw().
*
* Drivers should use this function instead of netif_stop_queue.
*/
-void ieee80211_stop_queues(struct ieee80211_hw *hw);
+void mac80211_stop_queues(struct mac80211_hw *hw);
/**
- * ieee80211_wake_queues - wake all queues
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * mac80211_wake_queues - wake all queues
+ * @hw: pointer as obtained from mac80211_alloc_hw().
*
* Drivers should use this function instead of netif_wake_queue.
*/
-void ieee80211_wake_queues(struct ieee80211_hw *hw);
+void mac80211_wake_queues(struct mac80211_hw *hw);
/**
- * ieee80211_scan_completed - completed hardware scan
+ * mac80211_scan_completed - completed hardware scan
*
* When hardware scan offload is used (i.e. the hw_scan() callback is
* assigned) this function needs to be called by the driver to notify
@@ -2620,20 +2622,20 @@ void ieee80211_wake_queues(struct ieee80211_hw *hw);
* @hw: the hardware that finished the scan
* @aborted: set to true if scan was aborted
*/
-void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted);
+void mac80211_scan_completed(struct mac80211_hw *hw, bool aborted);
/**
- * ieee80211_sched_scan_results - got results from scheduled scan
+ * mac80211_sched_scan_results - got results from scheduled scan
*
* When a scheduled scan is running, this function needs to be called by the
* driver whenever there are new scan results available.
*
* @hw: the hardware that is performing scheduled scans
*/
-void ieee80211_sched_scan_results(struct ieee80211_hw *hw);
+void mac80211_sched_scan_results(struct mac80211_hw *hw);
/**
- * ieee80211_sched_scan_stopped - inform that the scheduled scan has stopped
+ * mac80211_sched_scan_stopped - inform that the scheduled scan has stopped
*
* When a scheduled scan is running, this function can be called by
* the driver if it needs to stop the scan to perform another task.
@@ -2642,15 +2644,15 @@ void ieee80211_sched_scan_results(struct ieee80211_hw *hw);
*
* @hw: the hardware that is performing scheduled scans
*/
-void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw);
+void mac80211_sched_scan_stopped(struct mac80211_hw *hw);
/**
- * ieee80211_iterate_active_interfaces - iterate active interfaces
+ * mac80211_iterate_active_interfaces - iterate active interfaces
*
* This function iterates over the interfaces associated with a given
* hardware that are currently active and calls the callback for them.
* This function allows the iterator function to sleep, when the iterator
- * function is atomic @ieee80211_iterate_active_interfaces_atomic can
+ * function is atomic @mac80211_iterate_active_interfaces_atomic can
* be used.
* Does not iterate over a new interface during add_interface()
*
@@ -2658,32 +2660,32 @@ void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw);
* @iterator: the iterator function to call
* @data: first argument of the iterator function
*/
-void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
+void mac80211_iterate_active_interfaces(struct mac80211_hw *hw,
void (*iterator)(void *data, u8 *mac,
- struct ieee80211_vif *vif),
+ struct mac80211_vif *vif),
void *data);
/**
- * ieee80211_iterate_active_interfaces_atomic - iterate active interfaces
+ * mac80211_iterate_active_interfaces_atomic - iterate active interfaces
*
* This function iterates over the interfaces associated with a given
* hardware that are currently active and calls the callback for them.
* This function requires the iterator callback function to be atomic,
- * if that is not desired, use @ieee80211_iterate_active_interfaces instead.
+ * if that is not desired, use @mac80211_iterate_active_interfaces instead.
* Does not iterate over a new interface during add_interface()
*
* @hw: the hardware struct of which the interfaces should be iterated over
* @iterator: the iterator function to call, cannot sleep
* @data: first argument of the iterator function
*/
-void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw,
+void mac80211_iterate_active_interfaces_atomic(struct mac80211_hw *hw,
void (*iterator)(void *data,
u8 *mac,
- struct ieee80211_vif *vif),
+ struct mac80211_vif *vif),
void *data);
/**
- * ieee80211_queue_work - add work onto the mac80211 workqueue
+ * mac80211_queue_work - add work onto the mac80211 workqueue
*
* Drivers and mac80211 use this to add work onto the mac80211 workqueue.
* This helper ensures drivers are not queueing work when they should not be.
@@ -2691,10 +2693,10 @@ void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw,
* @hw: the hardware struct for the interface we are adding work for
* @work: the work we want to add onto the mac80211 workqueue
*/
-void ieee80211_queue_work(struct ieee80211_hw *hw, struct work_struct *work);
+void mac80211_queue_work(struct mac80211_hw *hw, struct work_struct *work);
/**
- * ieee80211_queue_delayed_work - add work onto the mac80211 workqueue
+ * mac80211_queue_delayed_work - add work onto the mac80211 workqueue
*
* Drivers and mac80211 use this to queue delayed work onto the mac80211
* workqueue.
@@ -2703,12 +2705,12 @@ void ieee80211_queue_work(struct ieee80211_hw *hw, struct work_struct *work);
* @dwork: delayable work to queue onto the mac80211 workqueue
* @delay: number of jiffies to wait before queueing
*/
-void ieee80211_queue_delayed_work(struct ieee80211_hw *hw,
+void mac80211_queue_delayed_work(struct mac80211_hw *hw,
struct delayed_work *dwork,
unsigned long delay);
/**
- * ieee80211_start_tx_ba_session - Start a tx Block Ack session.
+ * mac80211_start_tx_ba_session - Start a tx Block Ack session.
* @sta: the station for which to start a BA session
* @tid: the TID to BA on.
* @timeout: session timeout value (in TUs)
@@ -2719,12 +2721,12 @@ void ieee80211_queue_delayed_work(struct ieee80211_hw *hw,
* the need to start aggregation on a certain RA/TID, the session level
* will be managed by the mac80211.
*/
-int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid,
+int mac80211_start_tx_ba_session(struct mac80211_sta *sta, u16 tid,
u16 timeout);
/**
- * ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate.
- * @vif: &struct ieee80211_vif pointer from the add_interface callback
+ * mac80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate.
+ * @vif: &struct mac80211_vif pointer from the add_interface callback
* @ra: receiver address of the BA session recipient.
* @tid: the TID to BA on.
*
@@ -2732,11 +2734,11 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid,
* finished with preparations for the BA session. It can be called
* from any context.
*/
-void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
+void mac80211_start_tx_ba_cb_irqsafe(struct mac80211_vif *vif, const u8 *ra,
u16 tid);
/**
- * ieee80211_stop_tx_ba_session - Stop a Block Ack session.
+ * mac80211_stop_tx_ba_session - Stop a Block Ack session.
* @sta: the station whose BA session to stop
* @tid: the TID to stop BA.
*
@@ -2746,11 +2748,11 @@ void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
* the need to stop aggregation on a certain RA/TID, the session level
* will be managed by the mac80211.
*/
-int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid);
+int mac80211_stop_tx_ba_session(struct mac80211_sta *sta, u16 tid);
/**
- * ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate.
- * @vif: &struct ieee80211_vif pointer from the add_interface callback
+ * mac80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate.
+ * @vif: &struct mac80211_vif pointer from the add_interface callback
* @ra: receiver address of the BA session recipient.
* @tid: the desired TID to BA on.
*
@@ -2758,11 +2760,11 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid);
* finished with preparations for the BA session tear down. It
* can be called from any context.
*/
-void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
+void mac80211_stop_tx_ba_cb_irqsafe(struct mac80211_vif *vif, const u8 *ra,
u16 tid);
/**
- * ieee80211_find_sta - find a station
+ * mac80211_find_sta - find a station
*
* @vif: virtual interface to look for station on
* @addr: station's address
@@ -2770,13 +2772,13 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
* This function must be called under RCU lock and the
* resulting pointer is only valid under RCU lock as well.
*/
-struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
+struct mac80211_sta *mac80211_find_sta(struct mac80211_vif *vif,
const u8 *addr);
/**
- * ieee80211_find_sta_by_ifaddr - find a station on hardware
+ * mac80211_find_sta_by_ifaddr - find a station on hardware
*
- * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @hw: pointer as obtained from mac80211_alloc_hw()
* @addr: remote station's address
* @localaddr: local address (vif->sdata->vif.addr). Use NULL for 'any'.
*
@@ -2793,12 +2795,12 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
*
* DO NOT USE THIS FUNCTION with localaddr NULL if at all possible.
*/
-struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw,
+struct mac80211_sta *mac80211_find_sta_by_ifaddr(struct mac80211_hw *hw,
const u8 *addr,
const u8 *localaddr);
/**
- * ieee80211_sta_block_awake - block station from waking up
+ * mac80211_sta_block_awake - block station from waking up
* @hw: the hardware
* @pubsta: the station
* @block: whether to block or unblock
@@ -2826,13 +2828,13 @@ struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw,
* it is unblocked, regardless of whether the station actually
* woke up while blocked or not.
*/
-void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
- struct ieee80211_sta *pubsta, bool block);
+void mac80211_sta_block_awake(struct mac80211_hw *hw,
+ struct mac80211_sta *pubsta, bool block);
/**
- * ieee80211_ap_probereq_get - retrieve a Probe Request template
- * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_ap_probereq_get - retrieve a Probe Request template
+ * @hw: pointer obtained from mac80211_alloc_hw().
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
*
* Creates a Probe Request template which can, for example, be uploaded to
* hardware. The template is filled with bssid, ssid and supported rate
@@ -2841,38 +2843,38 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
* is only useful when the interface is associated, otherwise it will return
* NULL.
*/
-struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
+struct sk_buff *mac80211_ap_probereq_get(struct mac80211_hw *hw,
+ struct mac80211_vif *vif);
/**
- * ieee80211_beacon_loss - inform hardware does not receive beacons
+ * mac80211_beacon_loss - inform hardware does not receive beacons
*
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
*
- * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER and
- * %IEEE80211_CONF_PS is set, the driver needs to inform whenever the
+ * When beacon filtering is enabled with %MAC80211_HW_BEACON_FILTER and
+ * %MAC80211_CONF_PS is set, the driver needs to inform whenever the
* hardware is not receiving beacons with this function.
*/
-void ieee80211_beacon_loss(struct ieee80211_vif *vif);
+void mac80211_beacon_loss(struct mac80211_vif *vif);
/**
- * ieee80211_connection_loss - inform hardware has lost connection to the AP
+ * mac80211_connection_loss - inform hardware has lost connection to the AP
*
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
*
- * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER, and
- * %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver
+ * When beacon filtering is enabled with %MAC80211_HW_BEACON_FILTER, and
+ * %MAC80211_CONF_PS and %MAC80211_HW_CONNECTION_MONITOR are set, the driver
* needs to inform if the connection to the AP has been lost.
*
* This function will cause immediate change to disassociated state,
* without connection recovery attempts.
*/
-void ieee80211_connection_loss(struct ieee80211_vif *vif);
+void mac80211_connection_loss(struct mac80211_vif *vif);
/**
- * ieee80211_disable_dyn_ps - force mac80211 to temporarily disable dynamic psm
+ * mac80211_disable_dyn_ps - force mac80211 to temporarily disable dynamic psm
*
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
*
* Some hardware require full power save to manage simultaneous BT traffic
* on the WLAN frequency. Full PSM is required periodically, whenever there are
@@ -2882,63 +2884,63 @@ void ieee80211_connection_loss(struct ieee80211_vif *vif);
* This function will only temporarily disable dynamic PS, not enable PSM if
* it was not already enabled.
* The driver must make sure to re-enable dynamic PS using
- * ieee80211_enable_dyn_ps() if the driver has disabled it.
+ * mac80211_enable_dyn_ps() if the driver has disabled it.
*
*/
-void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif);
+void mac80211_disable_dyn_ps(struct mac80211_vif *vif);
/**
- * ieee80211_enable_dyn_ps - restore dynamic psm after being disabled
+ * mac80211_enable_dyn_ps - restore dynamic psm after being disabled
*
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
*
* This function restores dynamic PS after being temporarily disabled via
- * ieee80211_disable_dyn_ps(). Each ieee80211_disable_dyn_ps() call must
+ * mac80211_disable_dyn_ps(). Each mac80211_disable_dyn_ps() call must
* be coupled with an eventual call to this function.
*
*/
-void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif);
+void mac80211_enable_dyn_ps(struct mac80211_vif *vif);
/**
- * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring
+ * mac80211_cqm_rssi_notify - inform a configured connection quality monitoring
* rssi threshold triggered
*
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
* @rssi_event: the RSSI trigger event type
* @gfp: context flags
*
- * When the %IEEE80211_HW_SUPPORTS_CQM_RSSI is set, and a connection quality
+ * When the %MAC80211_HW_SUPPORTS_CQM_RSSI is set, and a connection quality
* monitoring is configured with an rssi threshold, the driver will inform
* whenever the rssi level reaches the threshold.
*/
-void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
+void mac80211_cqm_rssi_notify(struct mac80211_vif *vif,
enum nl80211_cqm_rssi_threshold_event rssi_event,
gfp_t gfp);
/**
- * ieee80211_chswitch_done - Complete channel switch process
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_chswitch_done - Complete channel switch process
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
* @success: make the channel switch successful or not
*
* Complete the channel switch post-process: set the new operational channel
* and wake up the suspended queues.
*/
-void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success);
+void mac80211_chswitch_done(struct mac80211_vif *vif, bool success);
/**
- * ieee80211_request_smps - request SM PS transition
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * mac80211_request_smps - request SM PS transition
+ * @vif: &struct mac80211_vif pointer from the add_interface callback.
* @smps_mode: new SM PS mode
*
* This allows the driver to request an SM PS transition in managed
* mode. This is useful when the driver has more information than
* the stack about possible interference, for example by bluetooth.
*/
-void ieee80211_request_smps(struct ieee80211_vif *vif,
- enum ieee80211_smps_mode smps_mode);
+void mac80211_request_smps(struct mac80211_vif *vif,
+ enum mac80211_smps_mode smps_mode);
/**
- * ieee80211_key_removed - disable hw acceleration for key
+ * mac80211_key_removed - disable hw acceleration for key
* @key_conf: The key hw acceleration should be disabled for
*
* This allows drivers to indicate that the given key has been
@@ -2951,34 +2953,34 @@ void ieee80211_request_smps(struct ieee80211_vif *vif,
* @set_key. This function must be allowed to sleep, and the
* key it tries to disable may still be used until it returns.
*/
-void ieee80211_key_removed(struct ieee80211_key_conf *key_conf);
+void mac80211_key_removed(struct mac80211_key_conf *key_conf);
/**
- * ieee80211_ready_on_channel - notification of remain-on-channel start
- * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * mac80211_ready_on_channel - notification of remain-on-channel start
+ * @hw: pointer as obtained from mac80211_alloc_hw()
*/
-void ieee80211_ready_on_channel(struct ieee80211_hw *hw);
+void mac80211_ready_on_channel(struct mac80211_hw *hw);
/**
- * ieee80211_remain_on_channel_expired - remain_on_channel duration expired
- * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * mac80211_remain_on_channel_expired - remain_on_channel duration expired
+ * @hw: pointer as obtained from mac80211_alloc_hw()
*/
-void ieee80211_remain_on_channel_expired(struct ieee80211_hw *hw);
+void mac80211_remain_on_channel_expired(struct mac80211_hw *hw);
/* Rate control API */
/**
* enum rate_control_changed - flags to indicate which parameter changed
*
- * @IEEE80211_RC_HT_CHANGED: The HT parameters of the operating channel have
+ * @MAC80211_RC_HT_CHANGED: The HT parameters of the operating channel have
* changed, rate control algorithm can update its internal state if needed.
*/
enum rate_control_changed {
- IEEE80211_RC_HT_CHANGED = BIT(0)
+ MAC80211_RC_HT_CHANGED = BIT(0)
};
/**
- * struct ieee80211_tx_rate_control - rate control information for/from RC algo
+ * struct mac80211_tx_rate_control - rate control information for/from RC algo
*
* @hw: The hardware the algorithm is invoked for.
* @sband: The band this frame is being transmitted on.
@@ -2998,12 +3000,12 @@ enum rate_control_changed {
* to be filled in
* @bss: whether this frame is sent out in AP or IBSS mode
*/
-struct ieee80211_tx_rate_control {
- struct ieee80211_hw *hw;
+struct mac80211_tx_rate_control {
+ struct mac80211_hw *hw;
struct ieee80211_supported_band *sband;
- struct ieee80211_bss_conf *bss_conf;
+ struct mac80211_bss_conf *bss_conf;
struct sk_buff *skb;
- struct ieee80211_tx_rate reported_rate;
+ struct mac80211_tx_rate reported_rate;
bool rts, short_preamble;
u8 max_rate_idx;
u32 rate_idx_mask;
@@ -3013,31 +3015,31 @@ struct ieee80211_tx_rate_control {
struct rate_control_ops {
struct module *module;
const char *name;
- void *(*alloc)(struct ieee80211_hw *hw, struct dentry *debugfsdir);
+ void *(*alloc)(struct mac80211_hw *hw, struct dentry *debugfsdir);
void (*free)(void *priv);
- void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp);
+ void *(*alloc_sta)(void *priv, struct mac80211_sta *sta, gfp_t gfp);
void (*rate_init)(void *priv, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta);
+ struct mac80211_sta *sta, void *priv_sta);
void (*rate_update)(void *priv, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta,
+ struct mac80211_sta *sta,
void *priv_sta, u32 changed,
enum nl80211_channel_type oper_chan_type);
- void (*free_sta)(void *priv, struct ieee80211_sta *sta,
+ void (*free_sta)(void *priv, struct mac80211_sta *sta,
void *priv_sta);
void (*tx_status)(void *priv, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta,
+ struct mac80211_sta *sta, void *priv_sta,
struct sk_buff *skb);
- void (*get_rate)(void *priv, struct ieee80211_sta *sta, void *priv_sta,
- struct ieee80211_tx_rate_control *txrc);
+ void (*get_rate)(void *priv, struct mac80211_sta *sta, void *priv_sta,
+ struct mac80211_tx_rate_control *txrc);
void (*add_sta_debugfs)(void *priv, void *priv_sta,
struct dentry *dir);
void (*remove_sta_debugfs)(void *priv, void *priv_sta);
};
-static inline int rate_supported(struct ieee80211_sta *sta,
+static inline int rate_supported(struct mac80211_sta *sta,
enum ieee80211_band band,
int index)
{
@@ -3057,19 +3059,19 @@ static inline int rate_supported(struct ieee80211_sta *sta,
* Rate control algorithms wishing to do more intelligent selection of
* rate for multicast/broadcast frames may choose to not use this.
*
- * @sta: &struct ieee80211_sta pointer to the target destination. Note
+ * @sta: &struct mac80211_sta pointer to the target destination. Note
* that this may be null.
* @priv_sta: private rate control structure. This may be null.
* @txrc: rate control information we sholud populate for mac80211.
*/
-bool rate_control_send_low(struct ieee80211_sta *sta,
+bool rate_control_send_low(struct mac80211_sta *sta,
void *priv_sta,
- struct ieee80211_tx_rate_control *txrc);
+ struct mac80211_tx_rate_control *txrc);
static inline s8
rate_lowest_index(struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta)
+ struct mac80211_sta *sta)
{
int i;
@@ -3085,7 +3087,7 @@ rate_lowest_index(struct ieee80211_supported_band *sband,
static inline
bool rate_usable_index_exists(struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta)
+ struct mac80211_sta *sta)
{
unsigned int i;
@@ -3095,41 +3097,41 @@ bool rate_usable_index_exists(struct ieee80211_supported_band *sband,
return false;
}
-int ieee80211_rate_control_register(struct rate_control_ops *ops);
-void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
+int mac80211_rate_control_register(struct rate_control_ops *ops);
+void mac80211_rate_control_unregister(struct rate_control_ops *ops);
static inline bool
-conf_is_ht20(struct ieee80211_conf *conf)
+conf_is_ht20(struct mac80211_conf *conf)
{
return conf->channel_type == NL80211_CHAN_HT20;
}
static inline bool
-conf_is_ht40_minus(struct ieee80211_conf *conf)
+conf_is_ht40_minus(struct mac80211_conf *conf)
{
return conf->channel_type == NL80211_CHAN_HT40MINUS;
}
static inline bool
-conf_is_ht40_plus(struct ieee80211_conf *conf)
+conf_is_ht40_plus(struct mac80211_conf *conf)
{
return conf->channel_type == NL80211_CHAN_HT40PLUS;
}
static inline bool
-conf_is_ht40(struct ieee80211_conf *conf)
+conf_is_ht40(struct mac80211_conf *conf)
{
return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf);
}
static inline bool
-conf_is_ht(struct ieee80211_conf *conf)
+conf_is_ht(struct mac80211_conf *conf)
{
return conf->channel_type != NL80211_CHAN_NO_HT;
}
static inline enum nl80211_iftype
-ieee80211_iftype_p2p(enum nl80211_iftype type, bool p2p)
+mac80211_iftype_p2p(enum nl80211_iftype type, bool p2p)
{
if (p2p) {
switch (type) {
@@ -3145,9 +3147,9 @@ ieee80211_iftype_p2p(enum nl80211_iftype type, bool p2p)
}
static inline enum nl80211_iftype
-ieee80211_vif_type_p2p(struct ieee80211_vif *vif)
+mac80211_vif_type_p2p(struct mac80211_vif *vif)
{
- return ieee80211_iftype_p2p(vif->type, vif->p2p);
+ return mac80211_iftype_p2p(vif->type, vif->p2p);
}
#endif /* MAC80211_H */
It's very confusing that mac80211 uses ieee80211_ prefix everywhere and then we have the generic net/ieee80211.h and cfg80211 also using ieee80211_ prefix. To make it easier to the developers change mac80211 use mac80211_ prefix everywhere. As this is a huge task, introduce new file mac80211-compat.h which makes it possible to not break the build while the transition is in progress. Once mac80211 and all the drivers have been changed to use the new prefix mac80211-compat.h will be removed. Signed-off-by: Kalle Valo <kvalo@adurom.com> --- include/net/mac80211-compat.h | 273 ++++++++ include/net/mac80211.h | 1428 +++++++++++++++++++++-------------------- 2 files changed, 988 insertions(+), 713 deletions(-) create mode 100644 include/net/mac80211-compat.h -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html