@@ -1411,9 +1411,11 @@ static int ieee80211_change_station(struct wiphy *wiphy,
return -ENOENT;
}
- /* in station mode, supported rates are only valid with TDLS */
+ /* in station mode, some updates are only valid with TDLS */
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
- params->supported_rates &&
+ (params->supported_rates || params->ht_capa || params->vht_capa ||
+ params->sta_modify_mask ||
+ (params->sta_flags_mask & BIT(NL80211_STA_FLAG_WME))) &&
!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) {
mutex_unlock(&local->sta_mtx);
return -EINVAL;
@@ -3302,6 +3302,63 @@ static struct net_device *get_vlan(struct genl_info *info,
return ERR_PTR(ret);
}
+static struct nla_policy
+nl80211_sta_wme_policy[NL80211_STA_WME_MAX + 1] __read_mostly = {
+ [NL80211_STA_WME_UAPSD_QUEUES] = { .type = NLA_U8 },
+ [NL80211_STA_WME_MAX_SP] = { .type = NLA_U8 },
+};
+
+static int nl80211_set_station_tdls(struct genl_info *info,
+ struct station_parameters *params)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct nlattr *tb[NL80211_STA_WME_MAX + 1];
+ struct nlattr *nla;
+ int err;
+
+ /* Can only set if TDLS ... */
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS))
+ return -EOPNOTSUPP;
+
+ /* ... with external setup is supported */
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP))
+ return -EOPNOTSUPP;
+
+ /* Dummy STA entry gets updated once the peer capabilities are known */
+ if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
+ params->ht_capa =
+ nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
+ if (info->attrs[NL80211_ATTR_VHT_CAPABILITY])
+ params->vht_capa =
+ nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]);
+
+ /* parse WME attributes if present */
+ if (!info->attrs[NL80211_ATTR_STA_WME])
+ return 0;
+
+ nla = info->attrs[NL80211_ATTR_STA_WME];
+ err = nla_parse_nested(tb, NL80211_STA_WME_MAX, nla,
+ nl80211_sta_wme_policy);
+ if (err)
+ return err;
+
+ if (tb[NL80211_STA_WME_UAPSD_QUEUES])
+ params->uapsd_queues = nla_get_u8(
+ tb[NL80211_STA_WME_UAPSD_QUEUES]);
+ if (params->uapsd_queues & ~IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK)
+ return -EINVAL;
+
+ if (tb[NL80211_STA_WME_MAX_SP])
+ params->max_sp = nla_get_u8(tb[NL80211_STA_WME_MAX_SP]);
+
+ if (params->max_sp & ~IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK)
+ return -EINVAL;
+
+ params->sta_modify_mask |= STATION_PARAM_APPLY_UAPSD;
+
+ return 0;
+}
+
static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -3343,8 +3400,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]);
}
- if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL] ||
- info->attrs[NL80211_ATTR_HT_CAPABILITY])
+ if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
return -EINVAL;
if (!rdev->ops->change_station)
@@ -3417,6 +3473,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY])
return -EINVAL;
+ if (info->attrs[NL80211_ATTR_HT_CAPABILITY] ||
+ info->attrs[NL80211_ATTR_VHT_CAPABILITY])
+ return -EINVAL;
/* must be last in here for error handling */
params.vlan = get_vlan(info, rdev);
@@ -3432,13 +3491,29 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
* to change the flag.
*/
params.sta_flags_mask &= ~BIT(NL80211_STA_FLAG_TDLS_PEER);
- /* fall through */
+ /* Include parameters for TDLS peer (driver will check) */
+ err = nl80211_set_station_tdls(info, ¶ms);
+ if (err)
+ return err;
+ /* disallow things sta doesn't support */
+ if (params.plink_action)
+ return -EINVAL;
+ if (params.local_pm)
+ return -EINVAL;
+ /* reject any changes other than AUTHORIZED or WME (for TDLS) */
+ if (params.sta_flags_mask & ~(BIT(NL80211_STA_FLAG_AUTHORIZED) |
+ BIT(NL80211_STA_FLAG_WME)))
+ return -EINVAL;
+ break;
case NL80211_IFTYPE_ADHOC:
/* disallow things sta doesn't support */
if (params.plink_action)
return -EINVAL;
if (params.local_pm)
return -EINVAL;
+ if (info->attrs[NL80211_ATTR_HT_CAPABILITY] ||
+ info->attrs[NL80211_ATTR_VHT_CAPABILITY])
+ return -EINVAL;
/* reject any changes other than AUTHORIZED */
if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED))
return -EINVAL;
@@ -3453,6 +3528,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY])
return -EINVAL;
+ if (info->attrs[NL80211_ATTR_HT_CAPABILITY] ||
+ info->attrs[NL80211_ATTR_VHT_CAPABILITY])
+ return -EINVAL;
/*
* No special handling for TDLS here -- the userspace
* mesh code doesn't have this bug.
@@ -3477,11 +3555,6 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
return err;
}
-static struct nla_policy
-nl80211_sta_wme_policy[NL80211_STA_WME_MAX + 1] __read_mostly = {
- [NL80211_STA_WME_UAPSD_QUEUES] = { .type = NLA_U8 },
- [NL80211_STA_WME_MAX_SP] = { .type = NLA_U8 },
-};
static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
{
The information of the peer's capabilities is required for the driver to perform TDLS Peer UAPSD operations. This information of the peer is passed by the supplicant using NL80211_CMD_SET_STATION command. This commit enhances the function nl80211_set_station to pass this information of the peer to the driver in case this command is used with the TDLS peer STA. In addition, make the HT/VHT capability configuration handled more consistently for other STA cases (reject both instead of just HT). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> --- net/mac80211/cfg.c | 6 ++-- net/wireless/nl80211.c | 89 +++++++++++++++++++++++++++++++++++++++++++----- 2 files changed, 85 insertions(+), 10 deletions(-)