@@ -1756,6 +1756,16 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map))
val |= WMI_10_4_BSS_CHANNEL_INFO_64;
+ /* 10.4 firmware supports BT-Coex without reloading firmware
+ * via pdev param. To support Bluetooth coexistence pdev param,
+ * WMI_COEX_GPIO_SUPPORT of extended resource config should be
+ * enabled always.
+ */
+ if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) &&
+ test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
+ ar->running_fw->fw_file.fw_features))
+ val |= WMI_10_4_COEX_GPIO_SUPPORT;
+
status = ath10k_mac_ext_resource_config(ar, val);
if (status) {
ath10k_err(ar,
@@ -2127,6 +2127,7 @@ static ssize_t ath10k_write_btcoex(struct file *file,
size_t buf_size;
int ret;
bool val;
+ u32 pdev_param;
buf_size = min(count, (sizeof(buf) - 1));
if (copy_from_user(buf, ubuf, buf_size))
@@ -2150,14 +2151,25 @@ static ssize_t ath10k_write_btcoex(struct file *file,
goto exit;
}
+ pdev_param = ar->wmi.pdev_param->enable_btcoex;
+ if (test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
+ ar->running_fw->fw_file.fw_features)) {
+ ret = ath10k_wmi_pdev_set_param(ar, pdev_param, val);
+ if (ret) {
+ ath10k_warn(ar, "failed to enable btcoex: %d\n", ret);
+ ret = count;
+ goto exit;
+ }
+ } else {
+ ath10k_info(ar, "restarting firmware due to btcoex change");
+ queue_work(ar->workqueue, &ar->restart_work);
+ }
+
if (val)
set_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
else
clear_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
- ath10k_info(ar, "restarting firmware due to btcoex change");
-
- queue_work(ar->workqueue, &ar->restart_work);
ret = count;
exit:
@@ -4468,6 +4468,19 @@ static int ath10k_start(struct ieee80211_hw *hw)
}
}
+ param = ar->wmi.pdev_param->enable_btcoex;
+ if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) &&
+ test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
+ ar->running_fw->fw_file.fw_features)) {
+ ret = ath10k_wmi_pdev_set_param(ar, param, 0);
+ if (ret) {
+ ath10k_warn(ar,
+ "failed to set btcoex param: %d\n", ret);
+ goto err_core_stop;
+ }
+ clear_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
+ }
+
ar->num_started_vdevs = 0;
ath10k_regd_update(ar);
@@ -1104,6 +1104,7 @@ static struct wmi_pdev_param_map wmi_pdev_param_map = {
.wapi_mbssid_offset = WMI_PDEV_PARAM_UNSUPPORTED,
.arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED,
.arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED,
+ .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED,
};
static struct wmi_pdev_param_map wmi_10x_pdev_param_map = {
@@ -1199,6 +1200,7 @@ static struct wmi_pdev_param_map wmi_10x_pdev_param_map = {
.wapi_mbssid_offset = WMI_PDEV_PARAM_UNSUPPORTED,
.arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED,
.arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED,
+ .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED,
};
static struct wmi_pdev_param_map wmi_10_2_4_pdev_param_map = {
@@ -1294,6 +1296,7 @@ static struct wmi_pdev_param_map wmi_10_2_4_pdev_param_map = {
.wapi_mbssid_offset = WMI_PDEV_PARAM_UNSUPPORTED,
.arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED,
.arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED,
+ .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED,
};
/* firmware 10.2 specific mappings */
@@ -1550,6 +1553,7 @@ static struct wmi_pdev_param_map wmi_10_4_pdev_param_map = {
.wapi_mbssid_offset = WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
.arp_srcaddr = WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
.arp_dstaddr = WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
+ .enable_btcoex = WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
};
static const struct wmi_peer_flags_map wmi_peer_flags_map = {
@@ -3447,6 +3447,7 @@ struct wmi_pdev_param_map {
u32 wapi_mbssid_offset;
u32 arp_srcaddr;
u32 arp_dstaddr;
+ u32 enable_btcoex;
};
#define WMI_PDEV_PARAM_UNSUPPORTED 0
@@ -3760,6 +3761,9 @@ enum wmi_10_4_pdev_param {
WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
+ WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
+ WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
+ WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
};
struct wmi_pdev_set_param_cmd {
10.4 firmware has support to enable or disable btcoex functionality without reloading firmware via wmi pdev param. Add provision to send pdev param command via existing btcoex knob. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/core.c | 10 ++++++++++ drivers/net/wireless/ath/ath10k/debug.c | 18 +++++++++++++++--- drivers/net/wireless/ath/ath10k/mac.c | 13 +++++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 4 ++++ drivers/net/wireless/ath/ath10k/wmi.h | 4 ++++ 5 files changed, 46 insertions(+), 3 deletions(-)