@@ -18,7 +18,6 @@
#include <linux/nl80211.h>
#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
#include <linux/module.h>
#include "ath9k.h"
@@ -58,20 +57,9 @@ static void ath_ahb_read_cachesize(struct ath_common *common, int *csz)
static bool ath_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
{
- struct ath_softc *sc = (struct ath_softc *)common->priv;
- struct platform_device *pdev = to_platform_device(sc->dev);
- struct ath9k_platform_data *pdata;
-
- pdata = dev_get_platdata(&pdev->dev);
- if (off >= (ARRAY_SIZE(pdata->eeprom_data))) {
- ath_err(common,
- "%s: flash read failed, offset %08x is out of range\n",
- __func__, off);
- return false;
- }
-
- *data = pdata->eeprom_data[off];
- return true;
+ ath_err(common, "%s: eeprom data has to be provided externally\n",
+ __func__);
+ return false;
}
static struct ath_bus_ops ath_ahb_bus_ops = {
@@ -15,6 +15,7 @@
*/
#include "hw.h"
+#include <linux/ath9k_platform.h>
void ath9k_hw_analog_shift_regwrite(struct ath_hw *ah, u32 reg, u32 val)
{
@@ -108,26 +109,42 @@ void ath9k_hw_usb_gen_fill_eeprom(struct ath_hw *ah, u16 *eep_data,
}
}
-static bool ath9k_hw_nvram_read_blob(struct ath_hw *ah, u32 off,
- u16 *data)
+static bool ath9k_hw_nvram_read_array(u16 *blob, size_t blob_size,
+ off_t offset, u16 *data)
{
- u16 *blob_data;
-
- if (off * sizeof(u16) > ah->eeprom_blob->size)
+ if (offset > blob_size)
return false;
- blob_data = (u16 *)ah->eeprom_blob->data;
- *data = blob_data[off];
+ *data = blob[offset];
return true;
}
+static bool ath9k_hw_nvram_read_pdata(struct ath9k_platform_data *pdata,
+ off_t offset, u16 *data)
+{
+ return ath9k_hw_nvram_read_array(pdata->eeprom_data,
+ ARRAY_SIZE(pdata->eeprom_data),
+ offset, data);
+}
+
+static bool ath9k_hw_nvram_read_firmware(const struct firmware *eeprom_blob,
+ off_t offset, u16 *data)
+{
+ return ath9k_hw_nvram_read_array((u16 *) eeprom_blob->data,
+ eeprom_blob->size / sizeof(u16),
+ offset, data);
+}
+
bool ath9k_hw_nvram_read(struct ath_hw *ah, u32 off, u16 *data)
{
struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_platform_data *pdata = ah->dev->platform_data;
bool ret;
if (ah->eeprom_blob)
- ret = ath9k_hw_nvram_read_blob(ah, off, data);
+ ret = ath9k_hw_nvram_read_firmware(ah->eeprom_blob, off, data);
+ else if (pdata && !pdata->use_eeprom && pdata->eeprom_data)
+ ret = ath9k_hw_nvram_read_pdata(pdata, off, data);
else
ret = common->bus_ops->eeprom_read(common, off, data);
@@ -19,7 +19,6 @@
#include <linux/nl80211.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
-#include <linux/ath9k_platform.h>
#include <linux/module.h>
#include "ath9k.h"
@@ -786,37 +785,21 @@ static void ath_pci_read_cachesize(struct ath_common *common, int *csz)
static bool ath_pci_eeprom_read(struct ath_common *common, u32 off, u16 *data)
{
- struct ath_softc *sc = (struct ath_softc *) common->priv;
- struct ath9k_platform_data *pdata = sc->dev->platform_data;
-
- if (pdata && !pdata->use_eeprom) {
- if (off >= (ARRAY_SIZE(pdata->eeprom_data))) {
- ath_err(common,
- "%s: eeprom read failed, offset %08x is out of range\n",
- __func__, off);
-
- return false;
- }
-
- *data = pdata->eeprom_data[off];
- } else {
- struct ath_hw *ah = (struct ath_hw *) common->ah;
-
- common->ops->read(ah, AR5416_EEPROM_OFFSET +
- (off << AR5416_EEPROM_S));
-
- if (!ath9k_hw_wait(ah,
- AR_EEPROM_STATUS_DATA,
- AR_EEPROM_STATUS_DATA_BUSY |
- AR_EEPROM_STATUS_DATA_PROT_ACCESS, 0,
- AH_WAIT_TIMEOUT)) {
- return false;
- }
-
- *data = MS(common->ops->read(ah, AR_EEPROM_STATUS_DATA),
- AR_EEPROM_STATUS_DATA_VAL);
+ struct ath_hw *ah = (struct ath_hw *) common->ah;
+
+ common->ops->read(ah, AR5416_EEPROM_OFFSET + (off << AR5416_EEPROM_S));
+
+ if (!ath9k_hw_wait(ah,
+ AR_EEPROM_STATUS_DATA,
+ AR_EEPROM_STATUS_DATA_BUSY |
+ AR_EEPROM_STATUS_DATA_PROT_ACCESS, 0,
+ AH_WAIT_TIMEOUT)) {
+ return false;
}
+ *data = MS(common->ops->read(ah, AR_EEPROM_STATUS_DATA),
+ AR_EEPROM_STATUS_DATA_VAL);
+
return true;
}
There were two paths in the code for "external" eeprom sources. The code in eeprom.c only handled the cases where the eeprom data was loaded via request_firmware. ahb.c and pci.c on the other hand had some duplicate code which was only used when the eeprom data was passed via ath9k_platform_data. With this change all eeprom data handling is now unified in eeprom.c. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- Changes since v1: - rebased to currrent ath.git/ath-next to resolve a small merge conflict with commit "0f27ac40fb64 ath9k: return false when reading wrong eeprom offset" - renamed ath9k_hw_nvram_read_blob to ath9k_hw_nvram_read_array since that name fit the function's purpose better - fixed a bug in v1 which caused ARRAY_SIZE(pdata->eeprom_blob) to be interpreted as "count of u8", while it is actually "count of u16" (this led to some small code changes, such as introduction of the _read_pdata and _read_firmware functions to make the code easier to read) drivers/net/wireless/ath/ath9k/ahb.c | 18 +++----------- drivers/net/wireless/ath/ath9k/eeprom.c | 33 +++++++++++++++++++------ drivers/net/wireless/ath/ath9k/pci.c | 43 ++++++++++----------------------- 3 files changed, 41 insertions(+), 53 deletions(-)