diff mbox

[1/3] soc: qcom: smd: Transition client drivers from smd to rpmsg

Message ID 20170320233544.1656-1-bjorn.andersson@linaro.org (mailing list archive)
State Not Applicable
Delegated to: Kalle Valo
Headers show

Commit Message

Bjorn Andersson March 20, 2017, 11:35 p.m. UTC
By moving these client drivers to use RPMSG instead of the direct SMD
API we can reuse them ontop of the newly added GLINK wire-protocol
support found in the 820 and 835 Qualcomm platforms.

As the new (RPMSG-based) and old SMD implementations are mutually
exclusive we have to change all client drivers in one commit, to make
sure we have a working system before and after this transition.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
(https://lkml.org/lkml/2017/3/20/1038).

 drivers/bluetooth/Kconfig                  |  2 +-
 drivers/bluetooth/btqcomsmd.c              | 32 +++++++++----------
 drivers/net/wireless/ath/wcn36xx/Kconfig   |  2 +-
 drivers/net/wireless/ath/wcn36xx/main.c    |  6 ++--
 drivers/net/wireless/ath/wcn36xx/smd.c     | 10 +++---
 drivers/net/wireless/ath/wcn36xx/smd.h     |  6 ++--
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h |  2 +-
 drivers/soc/qcom/Kconfig                   |  4 +--
 drivers/soc/qcom/smd-rpm.c                 | 43 +++++++++++++------------
 drivers/soc/qcom/wcnss_ctrl.c              | 50 +++++++++++++++++-------------
 include/linux/soc/qcom/wcnss_ctrl.h        | 11 ++++---
 net/qrtr/Kconfig                           |  2 +-
 net/qrtr/smd.c                             | 42 ++++++++++++-------------
 13 files changed, 108 insertions(+), 104 deletions(-)

Comments

Marcel Holtmann March 21, 2017, 8:20 a.m. UTC | #1
Hi Bjorn,

> By moving these client drivers to use RPMSG instead of the direct SMD
> API we can reuse them ontop of the newly added GLINK wire-protocol
> support found in the 820 and 835 Qualcomm platforms.
> 
> As the new (RPMSG-based) and old SMD implementations are mutually
> exclusive we have to change all client drivers in one commit, to make
> sure we have a working system before and after this transition.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
> (https://lkml.org/lkml/2017/3/20/1038).
> 
> drivers/bluetooth/Kconfig                  |  2 +-
> drivers/bluetooth/btqcomsmd.c              | 32 +++++++++----------
> drivers/net/wireless/ath/wcn36xx/Kconfig   |  2 +-
> drivers/net/wireless/ath/wcn36xx/main.c    |  6 ++--
> drivers/net/wireless/ath/wcn36xx/smd.c     | 10 +++---
> drivers/net/wireless/ath/wcn36xx/smd.h     |  6 ++--
> drivers/net/wireless/ath/wcn36xx/wcn36xx.h |  2 +-
> drivers/soc/qcom/Kconfig                   |  4 +--
> drivers/soc/qcom/smd-rpm.c                 | 43 +++++++++++++------------
> drivers/soc/qcom/wcnss_ctrl.c              | 50 +++++++++++++++++-------------
> include/linux/soc/qcom/wcnss_ctrl.h        | 11 ++++---
> net/qrtr/Kconfig                           |  2 +-
> net/qrtr/smd.c                             | 42 ++++++++++++-------------
> 13 files changed, 108 insertions(+), 104 deletions(-)

I think that it is best if Dave takes these directly then and I pull them back down later into our trees. Including the Kconfig fix that I will ACK as well.

Acked-by: Marcel Holtmann <marcel@holtmann.org>

Regards

Marcel
Kalle Valo March 21, 2017, 12:17 p.m. UTC | #2
Marcel Holtmann <marcel@holtmann.org> writes:

>> By moving these client drivers to use RPMSG instead of the direct SMD
>> API we can reuse them ontop of the newly added GLINK wire-protocol
>> support found in the 820 and 835 Qualcomm platforms.
>> 
>> As the new (RPMSG-based) and old SMD implementations are mutually
>> exclusive we have to change all client drivers in one commit, to make
>> sure we have a working system before and after this transition.
>> 
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>> ---
>> 
>> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
>> (https://lkml.org/lkml/2017/3/20/1038).
>> 
>> drivers/bluetooth/Kconfig                  |  2 +-
>> drivers/bluetooth/btqcomsmd.c              | 32 +++++++++----------
>> drivers/net/wireless/ath/wcn36xx/Kconfig   |  2 +-
>> drivers/net/wireless/ath/wcn36xx/main.c    |  6 ++--
>> drivers/net/wireless/ath/wcn36xx/smd.c     | 10 +++---
>> drivers/net/wireless/ath/wcn36xx/smd.h     |  6 ++--
>> drivers/net/wireless/ath/wcn36xx/wcn36xx.h |  2 +-
>> drivers/soc/qcom/Kconfig                   |  4 +--
>> drivers/soc/qcom/smd-rpm.c                 | 43 +++++++++++++------------
>> drivers/soc/qcom/wcnss_ctrl.c              | 50 +++++++++++++++++-------------
>> include/linux/soc/qcom/wcnss_ctrl.h        | 11 ++++---
>> net/qrtr/Kconfig                           |  2 +-
>> net/qrtr/smd.c                             | 42 ++++++++++++-------------
>> 13 files changed, 108 insertions(+), 104 deletions(-)
>
> I think that it is best if Dave takes these directly then and I pull
> them back down later into our trees. Including the Kconfig fix that I
> will ACK as well.
>
> Acked-by: Marcel Holtmann <marcel@holtmann.org>

Sounds good to me.

Acked-by: Kalle Valo <kvalo@codeaurora.org>
David Miller March 22, 2017, 6:44 p.m. UTC | #3
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Date: Mon, 20 Mar 2017 16:35:42 -0700

> By moving these client drivers to use RPMSG instead of the direct SMD
> API we can reuse them ontop of the newly added GLINK wire-protocol
> support found in the 820 and 835 Qualcomm platforms.
> 
> As the new (RPMSG-based) and old SMD implementations are mutually
> exclusive we have to change all client drivers in one commit, to make
> sure we have a working system before and after this transition.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
> (https://lkml.org/lkml/2017/3/20/1038).

Just some questions since I'm supposed to merge this into my net-next
tree.

What is the status of the Kconfig dependency fix and how will I be
getting it?

Second, should I merge all three of these patches to net-next or just
this one?

Thanks.
Marcel Holtmann March 22, 2017, 7:23 p.m. UTC | #4
Hi Dave,

>> By moving these client drivers to use RPMSG instead of the direct SMD
>> API we can reuse them ontop of the newly added GLINK wire-protocol
>> support found in the 820 and 835 Qualcomm platforms.
>> 
>> As the new (RPMSG-based) and old SMD implementations are mutually
>> exclusive we have to change all client drivers in one commit, to make
>> sure we have a working system before and after this transition.
>> 
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>> ---
>> 
>> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
>> (https://lkml.org/lkml/2017/3/20/1038).
> 
> Just some questions since I'm supposed to merge this into my net-next
> tree.
> 
> What is the status of the Kconfig dependency fix and how will I be
> getting it?

I acked that one separately and added you:

[PATCH v2] Bluetooth: btqcomsmd: fix compile-test dependency

> Second, should I merge all three of these patches to net-next or just
> this one?

I think you have to take all 3 patches. Otherwise it will break.

Regards

Marcel
Andy Gross March 22, 2017, 9:52 p.m. UTC | #5
On Mon, Mar 20, 2017 at 04:35:42PM -0700, Bjorn Andersson wrote:
> By moving these client drivers to use RPMSG instead of the direct SMD
> API we can reuse them ontop of the newly added GLINK wire-protocol
> support found in the 820 and 835 Qualcomm platforms.
> 
> As the new (RPMSG-based) and old SMD implementations are mutually
> exclusive we have to change all client drivers in one commit, to make
> sure we have a working system before and after this transition.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---

For the qcom/smd parts:

Acked-by: Andy Gross <andy.gross@linaro.org>
Andy Gross March 22, 2017, 9:56 p.m. UTC | #6
On Wed, Mar 22, 2017 at 11:44:39AM -0700, David Miller wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> Date: Mon, 20 Mar 2017 16:35:42 -0700
> 
> > By moving these client drivers to use RPMSG instead of the direct SMD
> > API we can reuse them ontop of the newly added GLINK wire-protocol
> > support found in the 820 and 835 Qualcomm platforms.
> > 
> > As the new (RPMSG-based) and old SMD implementations are mutually
> > exclusive we have to change all client drivers in one commit, to make
> > sure we have a working system before and after this transition.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> > 
> > Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
> > (https://lkml.org/lkml/2017/3/20/1038).
> 
> Just some questions since I'm supposed to merge this into my net-next
> tree.
> 
> What is the status of the Kconfig dependency fix and how will I be
> getting it?
> 
> Second, should I merge all three of these patches to net-next or just
> this one?

David,
I ack'd all three.  Please take these through your tree.


Bjorn,
Are we going to need an immutable branch or tag for sychronizing work?

Regards,

Andy Gross
Bjorn Andersson March 22, 2017, 9:57 p.m. UTC | #7
On Wed 22 Mar 11:44 PDT 2017, David Miller wrote:

> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> Date: Mon, 20 Mar 2017 16:35:42 -0700
> 
> > By moving these client drivers to use RPMSG instead of the direct SMD
> > API we can reuse them ontop of the newly added GLINK wire-protocol
> > support found in the 820 and 835 Qualcomm platforms.
> > 
> > As the new (RPMSG-based) and old SMD implementations are mutually
> > exclusive we have to change all client drivers in one commit, to make
> > sure we have a working system before and after this transition.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> > 
> > Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
> > (https://lkml.org/lkml/2017/3/20/1038).
> 
> Just some questions since I'm supposed to merge this into my net-next
> tree.
> 
> What is the status of the Kconfig dependency fix and how will I be
> getting it?
> 

There are two Kconfig dependencies in play here, the first is
c3104aae5d8c ("remoteproc: qcom: fix QCOM_SMD dependencies"), this was
picked up by Linus yesterday and will as such be in v4.10-rc4.

The other dependency, is the one Marcel wants you to pick up here is
https://patchwork.kernel.org/patch/9635385/. It's on LKML, but if you
want I can resend it with you as direct recipient, with Marcel's ack.

Likely Arnd would like this fix to be sent upstream for v4.11 already.

> Second, should I merge all three of these patches to net-next or just
> this one?
> 

I would like all three to be merged in this cycle and in addition I have
a couple of patches coming up that will cause some minor conflicts with
patch 2 - so I would prefer if patch 2 was available in a tag I can
merge into my tree.

Would it be possible for you to prepare merge all 4 (these 3 and the
bluetooth fix) and prepare a tag for Andy, Marcel and myself to include
in our trees?

Regards,
Bjorn
David Miller March 23, 2017, 2:23 a.m. UTC | #8
From: Marcel Holtmann <marcel@holtmann.org>
Date: Wed, 22 Mar 2017 20:23:15 +0100

> Hi Dave,
> 
>>> By moving these client drivers to use RPMSG instead of the direct SMD
>>> API we can reuse them ontop of the newly added GLINK wire-protocol
>>> support found in the 820 and 835 Qualcomm platforms.
>>> 
>>> As the new (RPMSG-based) and old SMD implementations are mutually
>>> exclusive we have to change all client drivers in one commit, to make
>>> sure we have a working system before and after this transition.
>>> 
>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>>> ---
>>> 
>>> Based on v4.11-rc3 with Arnd's Kconfig dependency fixes for BT_QCOMSMD
>>> (https://lkml.org/lkml/2017/3/20/1038).
>> 
>> Just some questions since I'm supposed to merge this into my net-next
>> tree.
>> 
>> What is the status of the Kconfig dependency fix and how will I be
>> getting it?
> 
> I acked that one separately and added you:
> 
> [PATCH v2] Bluetooth: btqcomsmd: fix compile-test dependency

I applied this to my 'net' tree, thanks.
David Miller March 23, 2017, 11:56 p.m. UTC | #9
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Date: Wed, 22 Mar 2017 14:57:33 -0700

> On Wed 22 Mar 11:44 PDT 2017, David Miller wrote:
> 
>> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>> Date: Mon, 20 Mar 2017 16:35:42 -0700
>> 
>> What is the status of the Kconfig dependency fix and how will I be
>> getting it?
>> 
> 
> There are two Kconfig dependencies in play here, the first is
> c3104aae5d8c ("remoteproc: qcom: fix QCOM_SMD dependencies"), this was
> picked up by Linus yesterday and will as such be in v4.10-rc4.
> 
> The other dependency, is the one Marcel wants you to pick up here is
> https://patchwork.kernel.org/patch/9635385/. It's on LKML, but if you
> want I can resend it with you as direct recipient, with Marcel's ack.
> 
> Likely Arnd would like this fix to be sent upstream for v4.11 already.
> 
>> Second, should I merge all three of these patches to net-next or just
>> this one?
>> 
> 
> I would like all three to be merged in this cycle and in addition I have
> a couple of patches coming up that will cause some minor conflicts with
> patch 2 - so I would prefer if patch 2 was available in a tag I can
> merge into my tree.

I should have all the dependencies in net-next now, but when I apply
this series I get undefined symbols:

[davem@localhost net-next]$ time make -s -j8
Kernel: arch/x86/boot/bzImage is ready  (#578)
ERROR: "qcom_rpm_smd_write" [drivers/regulator/qcom_smd-regulator.ko] undefined!
ERROR: "qcom_wcnss_open_channel" [drivers/net/wireless/ath/wcn36xx/wcn36xx.ko] undefined!
ERROR: "qcom_rpm_smd_write" [drivers/clk/qcom/clk-smd-rpm.ko] undefined!
ERROR: "qcom_wcnss_open_channel" [drivers/bluetooth/btqcomsmd.ko] undefined!
scripts/Makefile.modpost:91: recipe for target '__modpost' failed

Please fix this up.
Bjorn Andersson March 27, 2017, 10:58 p.m. UTC | #10
On Thu 23 Mar 16:56 PDT 2017, David Miller wrote:

> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> Date: Wed, 22 Mar 2017 14:57:33 -0700
> 
> > On Wed 22 Mar 11:44 PDT 2017, David Miller wrote:
> > 
> >> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> >> Date: Mon, 20 Mar 2017 16:35:42 -0700
> >> 
> >> What is the status of the Kconfig dependency fix and how will I be
> >> getting it?
> >> 
> > 
> > There are two Kconfig dependencies in play here, the first is
> > c3104aae5d8c ("remoteproc: qcom: fix QCOM_SMD dependencies"), this was
> > picked up by Linus yesterday and will as such be in v4.10-rc4.
> > 
> > The other dependency, is the one Marcel wants you to pick up here is
> > https://patchwork.kernel.org/patch/9635385/. It's on LKML, but if you
> > want I can resend it with you as direct recipient, with Marcel's ack.
> > 
> > Likely Arnd would like this fix to be sent upstream for v4.11 already.
> > 
> >> Second, should I merge all three of these patches to net-next or just
> >> this one?
> >> 
> > 
> > I would like all three to be merged in this cycle and in addition I have
> > a couple of patches coming up that will cause some minor conflicts with
> > patch 2 - so I would prefer if patch 2 was available in a tag I can
> > merge into my tree.
> 
> I should have all the dependencies in net-next now, but when I apply
> this series I get undefined symbols:
> 

I'm sorry, but I can't figure out how to reproduce this. I took the
master branch of net-next and applied the three patches in this series.

> [davem@localhost net-next]$ time make -s -j8
> Kernel: arch/x86/boot/bzImage is ready  (#578)
> ERROR: "qcom_rpm_smd_write" [drivers/regulator/qcom_smd-regulator.ko] undefined!

According to drivers/regulator/Kconfig REGULATOR_QCOM_SMD_RPM depends on
QCOM_SMD_RPM and there's nothing tricky here. So if the Kconfig
dependency is met you should have qcom_rpm_smd_write().

> ERROR: "qcom_wcnss_open_channel" [drivers/net/wireless/ath/wcn36xx/wcn36xx.ko] undefined!

WCN36XX depends on QCOM_WCNSS_CTRL || QCOM_WCNSS_CTRL=n, in other words
either qcom_wcnss_open_channel() should be defined from
drivers/soc/qcom/wcnss_ctrl.o (or .ko) or be stubbed by
include/linux/soc/qcom/wcnss_ctrl.h

> ERROR: "qcom_rpm_smd_write" [drivers/clk/qcom/clk-smd-rpm.ko] undefined!

As with REGULATOR_QCOM_SMD_RPM, this depends on QCOM_SMD_RPM - so it
should be covered.

> ERROR: "qcom_wcnss_open_channel" [drivers/bluetooth/btqcomsmd.ko] undefined!

This is the problem that was corrected by  6e9e6cc8f4e4 ("Bluetooth:
btqcomsmd: fix compile-test dependency") and with the same dependencies
as CONFIG_WCN36XX I don't see how this can happen (with that patch
applied).

> scripts/Makefile.modpost:91: recipe for target '__modpost' failed
> 
> Please fix this up.

Can you please help me figure this out?

Perhaps you can help me figure it out by letting me know the state of
the following config options in your local .config?

CONFIG_QCOM_SMD_RPM
CONFIG_QCOM_WCNSS_CTRL
CONFIG_REGULATOR_QCOM_SMD_RPM
CONFIG_RPMSG
CONFIG_WCN36XX

I'm sorry for the inconvenience.

Regards,
Bjorn
David Miller March 27, 2017, 11:04 p.m. UTC | #11
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Date: Mon, 27 Mar 2017 15:58:37 -0700

> I'm sorry, but I can't figure out how to reproduce this.

All of my builds are "make allmodconfig" so it should be easy to reproduce.
Bjorn Andersson March 28, 2017, 5:49 a.m. UTC | #12
On Mon 27 Mar 16:04 PDT 2017, David Miller wrote:

> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> Date: Mon, 27 Mar 2017 15:58:37 -0700
> 
> > I'm sorry, but I can't figure out how to reproduce this.
> 
> All of my builds are "make allmodconfig" so it should be easy to reproduce.

Thanks, turns out that while it was possible to select CONFIG_SMD_RPM
and CONFIG_QCOM_WCNSS_CTRL drivers/soc/Makefile does not traverse into
qcom/ unless CONFIG_ARCH_QCOM was set.

So I just sent out version 2 of the three patches, where I add an
explicit dependency on ARCH_QCOM for those two options.

Regards,
Bjorn
David Miller March 29, 2017, 12:58 a.m. UTC | #13
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Date: Mon, 27 Mar 2017 22:49:22 -0700

> On Mon 27 Mar 16:04 PDT 2017, David Miller wrote:
> 
>> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>> Date: Mon, 27 Mar 2017 15:58:37 -0700
>> 
>> > I'm sorry, but I can't figure out how to reproduce this.
>> 
>> All of my builds are "make allmodconfig" so it should be easy to reproduce.
> 
> Thanks, turns out that while it was possible to select CONFIG_SMD_RPM
> and CONFIG_QCOM_WCNSS_CTRL drivers/soc/Makefile does not traverse into
> qcom/ unless CONFIG_ARCH_QCOM was set.
> 
> So I just sent out version 2 of the three patches, where I add an
> explicit dependency on ARCH_QCOM for those two options.

Looks great, all three applied.
diff mbox

Patch

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 08e054507d0b..a6a9dd4d0eef 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -344,7 +344,7 @@  config BT_WILINK
 
 config BT_QCOMSMD
 	tristate "Qualcomm SMD based HCI support"
-	depends on QCOM_SMD || (COMPILE_TEST && QCOM_SMD=n)
+	depends on RPMSG || (COMPILE_TEST && RPMSG=n)
 	depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
 	select BT_QCA
 	help
diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c
index 8d4868af9bbd..ef730c173d4b 100644
--- a/drivers/bluetooth/btqcomsmd.c
+++ b/drivers/bluetooth/btqcomsmd.c
@@ -14,7 +14,7 @@ 
 
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/soc/qcom/smd.h>
+#include <linux/rpmsg.h>
 #include <linux/soc/qcom/wcnss_ctrl.h>
 #include <linux/platform_device.h>
 
@@ -26,8 +26,8 @@ 
 struct btqcomsmd {
 	struct hci_dev *hdev;
 
-	struct qcom_smd_channel *acl_channel;
-	struct qcom_smd_channel *cmd_channel;
+	struct rpmsg_endpoint *acl_channel;
+	struct rpmsg_endpoint *cmd_channel;
 };
 
 static int btqcomsmd_recv(struct hci_dev *hdev, unsigned int type,
@@ -48,19 +48,19 @@  static int btqcomsmd_recv(struct hci_dev *hdev, unsigned int type,
 	return hci_recv_frame(hdev, skb);
 }
 
-static int btqcomsmd_acl_callback(struct qcom_smd_channel *channel,
-				  const void *data, size_t count)
+static int btqcomsmd_acl_callback(struct rpmsg_device *rpdev, void *data,
+				  int count, void *priv, u32 addr)
 {
-	struct btqcomsmd *btq = qcom_smd_get_drvdata(channel);
+	struct btqcomsmd *btq = priv;
 
 	btq->hdev->stat.byte_rx += count;
 	return btqcomsmd_recv(btq->hdev, HCI_ACLDATA_PKT, data, count);
 }
 
-static int btqcomsmd_cmd_callback(struct qcom_smd_channel *channel,
-				  const void *data, size_t count)
+static int btqcomsmd_cmd_callback(struct rpmsg_device *rpdev, void *data,
+				  int count, void *priv, u32 addr)
 {
-	struct btqcomsmd *btq = qcom_smd_get_drvdata(channel);
+	struct btqcomsmd *btq = priv;
 
 	return btqcomsmd_recv(btq->hdev, HCI_EVENT_PKT, data, count);
 }
@@ -72,12 +72,12 @@  static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb)
 
 	switch (hci_skb_pkt_type(skb)) {
 	case HCI_ACLDATA_PKT:
-		ret = qcom_smd_send(btq->acl_channel, skb->data, skb->len);
+		ret = rpmsg_send(btq->acl_channel, skb->data, skb->len);
 		hdev->stat.acl_tx++;
 		hdev->stat.byte_tx += skb->len;
 		break;
 	case HCI_COMMAND_PKT:
-		ret = qcom_smd_send(btq->cmd_channel, skb->data, skb->len);
+		ret = rpmsg_send(btq->cmd_channel, skb->data, skb->len);
 		hdev->stat.cmd_tx++;
 		break;
 	default:
@@ -114,18 +114,15 @@  static int btqcomsmd_probe(struct platform_device *pdev)
 	wcnss = dev_get_drvdata(pdev->dev.parent);
 
 	btq->acl_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_ACL",
-						   btqcomsmd_acl_callback);
+						   btqcomsmd_acl_callback, btq);
 	if (IS_ERR(btq->acl_channel))
 		return PTR_ERR(btq->acl_channel);
 
 	btq->cmd_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_CMD",
-						   btqcomsmd_cmd_callback);
+						   btqcomsmd_cmd_callback, btq);
 	if (IS_ERR(btq->cmd_channel))
 		return PTR_ERR(btq->cmd_channel);
 
-	qcom_smd_set_drvdata(btq->acl_channel, btq);
-	qcom_smd_set_drvdata(btq->cmd_channel, btq);
-
 	hdev = hci_alloc_dev();
 	if (!hdev)
 		return -ENOMEM;
@@ -158,6 +155,9 @@  static int btqcomsmd_remove(struct platform_device *pdev)
 	hci_unregister_dev(btq->hdev);
 	hci_free_dev(btq->hdev);
 
+	rpmsg_destroy_ept(btq->cmd_channel);
+	rpmsg_destroy_ept(btq->acl_channel);
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/wcn36xx/Kconfig b/drivers/net/wireless/ath/wcn36xx/Kconfig
index 4b83e87f0b94..20bf967a70b9 100644
--- a/drivers/net/wireless/ath/wcn36xx/Kconfig
+++ b/drivers/net/wireless/ath/wcn36xx/Kconfig
@@ -2,7 +2,7 @@  config WCN36XX
 	tristate "Qualcomm Atheros WCN3660/3680 support"
 	depends on MAC80211 && HAS_DMA
 	depends on QCOM_WCNSS_CTRL || QCOM_WCNSS_CTRL=n
-	depends on QCOM_SMD || QCOM_SMD=n
+	depends on RPMSG || RPMSG=n
 	---help---
 	  This module adds support for wireless adapters based on
 	  Qualcomm Atheros WCN3660 and WCN3680 mobile chipsets.
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 7a0c2e7da7f6..bb7110f7fc86 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -22,7 +22,7 @@ 
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
-#include <linux/soc/qcom/smd.h>
+#include <linux/rpmsg.h>
 #include <linux/soc/qcom/smem_state.h>
 #include <linux/soc/qcom/wcnss_ctrl.h>
 #include "wcn36xx.h"
@@ -1218,15 +1218,13 @@  static int wcn36xx_probe(struct platform_device *pdev)
 
 	INIT_WORK(&wcn->scan_work, wcn36xx_hw_scan_worker);
 
-	wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process);
+	wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process, hw);
 	if (IS_ERR(wcn->smd_channel)) {
 		wcn36xx_err("failed to open WLAN_CTRL channel\n");
 		ret = PTR_ERR(wcn->smd_channel);
 		goto out_wq;
 	}
 
-	qcom_smd_set_drvdata(wcn->smd_channel, hw);
-
 	addr = of_get_property(pdev->dev.of_node, "local-mac-address", &ret);
 	if (addr && ret != ETH_ALEN) {
 		wcn36xx_err("invalid local-mac-address\n");
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 1c2966f7db7a..9c6590d5348a 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -19,7 +19,7 @@ 
 #include <linux/etherdevice.h>
 #include <linux/firmware.h>
 #include <linux/bitops.h>
-#include <linux/soc/qcom/smd.h>
+#include <linux/rpmsg.h>
 #include "smd.h"
 
 struct wcn36xx_cfg_val {
@@ -254,7 +254,7 @@  static int wcn36xx_smd_send_and_wait(struct wcn36xx *wcn, size_t len)
 
 	init_completion(&wcn->hal_rsp_compl);
 	start = jiffies;
-	ret = qcom_smd_send(wcn->smd_channel, wcn->hal_buf, len);
+	ret = rpmsg_send(wcn->smd_channel, wcn->hal_buf, len);
 	if (ret) {
 		wcn36xx_err("HAL TX failed\n");
 		goto out;
@@ -2205,11 +2205,11 @@  int wcn36xx_smd_set_mc_list(struct wcn36xx *wcn,
 	return ret;
 }
 
-int wcn36xx_smd_rsp_process(struct qcom_smd_channel *channel,
-			    const void *buf, size_t len)
+int wcn36xx_smd_rsp_process(struct rpmsg_device *rpdev,
+			    void *buf, int len, void *priv, u32 addr)
 {
 	const struct wcn36xx_hal_msg_header *msg_header = buf;
-	struct ieee80211_hw *hw = qcom_smd_get_drvdata(channel);
+	struct ieee80211_hw *hw = priv;
 	struct wcn36xx *wcn = hw->priv;
 	struct wcn36xx_hal_ind_msg *msg_ind;
 	wcn36xx_dbg_dump(WCN36XX_DBG_SMD_DUMP, "SMD <<< ", buf, len);
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index 8892ccd67b14..013fc9546f56 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -51,7 +51,7 @@  struct wcn36xx_hal_ind_msg {
 };
 
 struct wcn36xx;
-struct qcom_smd_channel;
+struct rpmsg_device;
 
 int wcn36xx_smd_open(struct wcn36xx *wcn);
 void wcn36xx_smd_close(struct wcn36xx *wcn);
@@ -129,8 +129,8 @@  int wcn36xx_smd_trigger_ba(struct wcn36xx *wcn, u8 sta_index);
 
 int wcn36xx_smd_update_cfg(struct wcn36xx *wcn, u32 cfg_id, u32 value);
 
-int wcn36xx_smd_rsp_process(struct qcom_smd_channel *channel,
-			    const void *buf, size_t len);
+int wcn36xx_smd_rsp_process(struct rpmsg_device *rpdev,
+			    void *buf, int len, void *priv, u32 addr);
 
 int wcn36xx_smd_set_mc_list(struct wcn36xx *wcn,
 			    struct ieee80211_vif *vif,
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 7423998ddeb4..b52b4da9a967 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -195,7 +195,7 @@  struct wcn36xx {
 	void __iomem		*ccu_base;
 	void __iomem		*dxe_base;
 
-	struct qcom_smd_channel *smd_channel;
+	struct rpmsg_endpoint	*smd_channel;
 
 	struct qcom_smem_state  *tx_enable_state;
 	unsigned		tx_enable_state_bit;
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 78b1bb7bcf20..751dce0c19b3 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -43,7 +43,7 @@  config QCOM_SMD
 
 config QCOM_SMD_RPM
 	tristate "Qualcomm Resource Power Manager (RPM) over SMD"
-	depends on QCOM_SMD && OF
+	depends on RPMSG && OF
 	help
 	  If you say yes to this option, support will be included for the
 	  Resource Power Manager system found in the Qualcomm 8974 based
@@ -76,7 +76,7 @@  config QCOM_SMSM
 
 config QCOM_WCNSS_CTRL
 	tristate "Qualcomm WCNSS control driver"
-	depends on QCOM_SMD
+	depends on RPMSG
 	help
 	  Client driver for the WCNSS_CTRL SMD channel, used to download nv
 	  firmware to a newly booted WCNSS chip.
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index 6609d7e0edb0..0dcf1bf33126 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -19,7 +19,7 @@ 
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 
-#include <linux/soc/qcom/smd.h>
+#include <linux/rpmsg.h>
 #include <linux/soc/qcom/smd-rpm.h>
 
 #define RPM_REQUEST_TIMEOUT     (5 * HZ)
@@ -32,7 +32,7 @@ 
  * @ack_status:		result of the rpm request
  */
 struct qcom_smd_rpm {
-	struct qcom_smd_channel *rpm_channel;
+	struct rpmsg_endpoint *rpm_channel;
 	struct device *dev;
 
 	struct completion ack;
@@ -133,7 +133,7 @@  int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm,
 	pkt->req.data_len = cpu_to_le32(count);
 	memcpy(pkt->payload, buf, count);
 
-	ret = qcom_smd_send(rpm->rpm_channel, pkt, size);
+	ret = rpmsg_send(rpm->rpm_channel, pkt, size);
 	if (ret)
 		goto out;
 
@@ -150,14 +150,16 @@  int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm,
 }
 EXPORT_SYMBOL(qcom_rpm_smd_write);
 
-static int qcom_smd_rpm_callback(struct qcom_smd_channel *channel,
-				 const void *data,
-				 size_t count)
+static int qcom_smd_rpm_callback(struct rpmsg_device *rpdev,
+				 void *data,
+				 int count,
+				 void *priv,
+				 u32 addr)
 {
 	const struct qcom_rpm_header *hdr = data;
 	size_t hdr_length = le32_to_cpu(hdr->length);
 	const struct qcom_rpm_message *msg;
-	struct qcom_smd_rpm *rpm = qcom_smd_get_drvdata(channel);
+	struct qcom_smd_rpm *rpm = dev_get_drvdata(&rpdev->dev);
 	const u8 *buf = data + sizeof(struct qcom_rpm_header);
 	const u8 *end = buf + hdr_length;
 	char msgbuf[32];
@@ -196,29 +198,27 @@  static int qcom_smd_rpm_callback(struct qcom_smd_channel *channel,
 	return 0;
 }
 
-static int qcom_smd_rpm_probe(struct qcom_smd_device *sdev)
+static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev)
 {
 	struct qcom_smd_rpm *rpm;
 
-	rpm = devm_kzalloc(&sdev->dev, sizeof(*rpm), GFP_KERNEL);
+	rpm = devm_kzalloc(&rpdev->dev, sizeof(*rpm), GFP_KERNEL);
 	if (!rpm)
 		return -ENOMEM;
 
 	mutex_init(&rpm->lock);
 	init_completion(&rpm->ack);
 
-	rpm->dev = &sdev->dev;
-	rpm->rpm_channel = sdev->channel;
-	qcom_smd_set_drvdata(sdev->channel, rpm);
+	rpm->dev = &rpdev->dev;
+	rpm->rpm_channel = rpdev->ept;
+	dev_set_drvdata(&rpdev->dev, rpm);
 
-	dev_set_drvdata(&sdev->dev, rpm);
-
-	return of_platform_populate(sdev->dev.of_node, NULL, NULL, &sdev->dev);
+	return of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev);
 }
 
-static void qcom_smd_rpm_remove(struct qcom_smd_device *sdev)
+static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev)
 {
-	of_platform_depopulate(&sdev->dev);
+	of_platform_depopulate(&rpdev->dev);
 }
 
 static const struct of_device_id qcom_smd_rpm_of_match[] = {
@@ -229,26 +229,25 @@  static const struct of_device_id qcom_smd_rpm_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, qcom_smd_rpm_of_match);
 
-static struct qcom_smd_driver qcom_smd_rpm_driver = {
+static struct rpmsg_driver qcom_smd_rpm_driver = {
 	.probe = qcom_smd_rpm_probe,
 	.remove = qcom_smd_rpm_remove,
 	.callback = qcom_smd_rpm_callback,
-	.driver  = {
+	.drv  = {
 		.name  = "qcom_smd_rpm",
-		.owner = THIS_MODULE,
 		.of_match_table = qcom_smd_rpm_of_match,
 	},
 };
 
 static int __init qcom_smd_rpm_init(void)
 {
-	return qcom_smd_driver_register(&qcom_smd_rpm_driver);
+	return register_rpmsg_driver(&qcom_smd_rpm_driver);
 }
 arch_initcall(qcom_smd_rpm_init);
 
 static void __exit qcom_smd_rpm_exit(void)
 {
-	qcom_smd_driver_unregister(&qcom_smd_rpm_driver);
+	unregister_rpmsg_driver(&qcom_smd_rpm_driver);
 }
 module_exit(qcom_smd_rpm_exit);
 
diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
index 520aedd29965..b9069184df19 100644
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -14,10 +14,10 @@ 
 #include <linux/firmware.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/soc/qcom/smd.h>
 #include <linux/io.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/rpmsg.h>
 #include <linux/soc/qcom/wcnss_ctrl.h>
 
 #define WCNSS_REQUEST_TIMEOUT	(5 * HZ)
@@ -40,7 +40,7 @@ 
  */
 struct wcnss_ctrl {
 	struct device *dev;
-	struct qcom_smd_channel *channel;
+	struct rpmsg_endpoint *channel;
 
 	struct completion ack;
 	struct completion cbc;
@@ -122,11 +122,13 @@  struct wcnss_download_nv_resp {
  *
  * Handles any incoming packets from the remote WCNSS_CTRL service.
  */
-static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
-				   const void *data,
-				   size_t count)
+static int wcnss_ctrl_smd_callback(struct rpmsg_device *rpdev,
+				   void *data,
+				   int count,
+				   void *priv,
+				   u32 addr)
 {
-	struct wcnss_ctrl *wcnss = qcom_smd_get_drvdata(channel);
+	struct wcnss_ctrl *wcnss = dev_get_drvdata(&rpdev->dev);
 	const struct wcnss_download_nv_resp *nvresp;
 	const struct wcnss_version_resp *version;
 	const struct wcnss_msg_hdr *hdr = data;
@@ -180,7 +182,7 @@  static int wcnss_request_version(struct wcnss_ctrl *wcnss)
 
 	msg.type = WCNSS_VERSION_REQ;
 	msg.len = sizeof(msg);
-	ret = qcom_smd_send(wcnss->channel, &msg, sizeof(msg));
+	ret = rpmsg_send(wcnss->channel, &msg, sizeof(msg));
 	if (ret < 0)
 		return ret;
 
@@ -238,7 +240,7 @@  static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
 
 		memcpy(req->fragment, data, req->frag_size);
 
-		ret = qcom_smd_send(wcnss->channel, req, req->hdr.len);
+		ret = rpmsg_send(wcnss->channel, req, req->hdr.len);
 		if (ret < 0) {
 			dev_err(wcnss->dev, "failed to send smd packet\n");
 			goto release_fw;
@@ -274,11 +276,16 @@  static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
  * @name:	SMD channel name
  * @cb:		callback to handle incoming data on the channel
  */
-struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb)
+struct rpmsg_endpoint *qcom_wcnss_open_channel(void *wcnss, const char *name, rpmsg_rx_cb_t cb, void *priv)
 {
+	struct rpmsg_channel_info chinfo;
 	struct wcnss_ctrl *_wcnss = wcnss;
 
-	return qcom_smd_open_channel(_wcnss->channel, name, cb);
+	strncpy(chinfo.name, name, sizeof(chinfo.name));
+	chinfo.src = RPMSG_ADDR_ANY;
+	chinfo.dst = RPMSG_ADDR_ANY;
+
+	return rpmsg_create_ept(_wcnss->channel->rpdev, cb, priv, chinfo);
 }
 EXPORT_SYMBOL(qcom_wcnss_open_channel);
 
@@ -306,35 +313,34 @@  static void wcnss_async_probe(struct work_struct *work)
 	of_platform_populate(wcnss->dev->of_node, NULL, NULL, wcnss->dev);
 }
 
-static int wcnss_ctrl_probe(struct qcom_smd_device *sdev)
+static int wcnss_ctrl_probe(struct rpmsg_device *rpdev)
 {
 	struct wcnss_ctrl *wcnss;
 
-	wcnss = devm_kzalloc(&sdev->dev, sizeof(*wcnss), GFP_KERNEL);
+	wcnss = devm_kzalloc(&rpdev->dev, sizeof(*wcnss), GFP_KERNEL);
 	if (!wcnss)
 		return -ENOMEM;
 
-	wcnss->dev = &sdev->dev;
-	wcnss->channel = sdev->channel;
+	wcnss->dev = &rpdev->dev;
+	wcnss->channel = rpdev->ept;
 
 	init_completion(&wcnss->ack);
 	init_completion(&wcnss->cbc);
 	INIT_WORK(&wcnss->probe_work, wcnss_async_probe);
 
-	qcom_smd_set_drvdata(sdev->channel, wcnss);
-	dev_set_drvdata(&sdev->dev, wcnss);
+	dev_set_drvdata(&rpdev->dev, wcnss);
 
 	schedule_work(&wcnss->probe_work);
 
 	return 0;
 }
 
-static void wcnss_ctrl_remove(struct qcom_smd_device *sdev)
+static void wcnss_ctrl_remove(struct rpmsg_device *rpdev)
 {
-	struct wcnss_ctrl *wcnss = qcom_smd_get_drvdata(sdev->channel);
+	struct wcnss_ctrl *wcnss = dev_get_drvdata(&rpdev->dev);
 
 	cancel_work_sync(&wcnss->probe_work);
-	of_platform_depopulate(&sdev->dev);
+	of_platform_depopulate(&rpdev->dev);
 }
 
 static const struct of_device_id wcnss_ctrl_of_match[] = {
@@ -342,18 +348,18 @@  static const struct of_device_id wcnss_ctrl_of_match[] = {
 	{}
 };
 
-static struct qcom_smd_driver wcnss_ctrl_driver = {
+static struct rpmsg_driver wcnss_ctrl_driver = {
 	.probe = wcnss_ctrl_probe,
 	.remove = wcnss_ctrl_remove,
 	.callback = wcnss_ctrl_smd_callback,
-	.driver  = {
+	.drv  = {
 		.name  = "qcom_wcnss_ctrl",
 		.owner = THIS_MODULE,
 		.of_match_table = wcnss_ctrl_of_match,
 	},
 };
 
-module_qcom_smd_driver(wcnss_ctrl_driver);
+module_rpmsg_driver(wcnss_ctrl_driver);
 
 MODULE_DESCRIPTION("Qualcomm WCNSS control driver");
 MODULE_LICENSE("GPL v2");
diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h
index eab64976a73b..a4dd4d7c711d 100644
--- a/include/linux/soc/qcom/wcnss_ctrl.h
+++ b/include/linux/soc/qcom/wcnss_ctrl.h
@@ -1,16 +1,19 @@ 
 #ifndef __WCNSS_CTRL_H__
 #define __WCNSS_CTRL_H__
 
-#include <linux/soc/qcom/smd.h>
+#include <linux/rpmsg.h>
 
 #if IS_ENABLED(CONFIG_QCOM_WCNSS_CTRL)
 
-struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb);
+struct rpmsg_endpoint *qcom_wcnss_open_channel(void *wcnss, const char *name,
+					       rpmsg_rx_cb_t cb, void *priv);
 
 #else
 
-static inline struct qcom_smd_channel*
-qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb)
+static struct rpmsg_endpoint *qcom_wcnss_open_channel(void *wcnss,
+						      const char *name,
+						      rpmsg_rx_cb_t cb,
+						      void *priv)
 {
 	WARN_ON(1);
 	return ERR_PTR(-ENXIO);
diff --git a/net/qrtr/Kconfig b/net/qrtr/Kconfig
index b83c6807a5ae..326fd97444f5 100644
--- a/net/qrtr/Kconfig
+++ b/net/qrtr/Kconfig
@@ -16,7 +16,7 @@  if QRTR
 
 config QRTR_SMD
 	tristate "SMD IPC Router channels"
-	depends on QCOM_SMD || (COMPILE_TEST && QCOM_SMD=n)
+	depends on RPMSG || (COMPILE_TEST && RPMSG=n)
 	---help---
 	  Say Y here to support SMD based ipcrouter channels.  SMD is the
 	  most common transport for IPC Router.
diff --git a/net/qrtr/smd.c b/net/qrtr/smd.c
index 0d11132b3370..50615d5efac1 100644
--- a/net/qrtr/smd.c
+++ b/net/qrtr/smd.c
@@ -14,21 +14,21 @@ 
 
 #include <linux/module.h>
 #include <linux/skbuff.h>
-#include <linux/soc/qcom/smd.h>
+#include <linux/rpmsg.h>
 
 #include "qrtr.h"
 
 struct qrtr_smd_dev {
 	struct qrtr_endpoint ep;
-	struct qcom_smd_channel *channel;
+	struct rpmsg_endpoint *channel;
 	struct device *dev;
 };
 
 /* from smd to qrtr */
-static int qcom_smd_qrtr_callback(struct qcom_smd_channel *channel,
-				  const void *data, size_t len)
+static int qcom_smd_qrtr_callback(struct rpmsg_device *rpdev,
+				  void *data, int len, void *priv, u32 addr)
 {
-	struct qrtr_smd_dev *qdev = qcom_smd_get_drvdata(channel);
+	struct qrtr_smd_dev *qdev = dev_get_drvdata(&rpdev->dev);
 	int rc;
 
 	if (!qdev)
@@ -54,7 +54,7 @@  static int qcom_smd_qrtr_send(struct qrtr_endpoint *ep, struct sk_buff *skb)
 	if (rc)
 		goto out;
 
-	rc = qcom_smd_send(qdev->channel, skb->data, skb->len);
+	rc = rpmsg_send(qdev->channel, skb->data, skb->len);
 
 out:
 	if (rc)
@@ -64,57 +64,55 @@  static int qcom_smd_qrtr_send(struct qrtr_endpoint *ep, struct sk_buff *skb)
 	return rc;
 }
 
-static int qcom_smd_qrtr_probe(struct qcom_smd_device *sdev)
+static int qcom_smd_qrtr_probe(struct rpmsg_device *rpdev)
 {
 	struct qrtr_smd_dev *qdev;
 	int rc;
 
-	qdev = devm_kzalloc(&sdev->dev, sizeof(*qdev), GFP_KERNEL);
+	qdev = devm_kzalloc(&rpdev->dev, sizeof(*qdev), GFP_KERNEL);
 	if (!qdev)
 		return -ENOMEM;
 
-	qdev->channel = sdev->channel;
-	qdev->dev = &sdev->dev;
+	qdev->channel = rpdev->ept;
+	qdev->dev = &rpdev->dev;
 	qdev->ep.xmit = qcom_smd_qrtr_send;
 
 	rc = qrtr_endpoint_register(&qdev->ep, QRTR_EP_NID_AUTO);
 	if (rc)
 		return rc;
 
-	qcom_smd_set_drvdata(sdev->channel, qdev);
-	dev_set_drvdata(&sdev->dev, qdev);
+	dev_set_drvdata(&rpdev->dev, qdev);
 
-	dev_dbg(&sdev->dev, "Qualcomm SMD QRTR driver probed\n");
+	dev_dbg(&rpdev->dev, "Qualcomm SMD QRTR driver probed\n");
 
 	return 0;
 }
 
-static void qcom_smd_qrtr_remove(struct qcom_smd_device *sdev)
+static void qcom_smd_qrtr_remove(struct rpmsg_device *rpdev)
 {
-	struct qrtr_smd_dev *qdev = dev_get_drvdata(&sdev->dev);
+	struct qrtr_smd_dev *qdev = dev_get_drvdata(&rpdev->dev);
 
 	qrtr_endpoint_unregister(&qdev->ep);
 
-	dev_set_drvdata(&sdev->dev, NULL);
+	dev_set_drvdata(&rpdev->dev, NULL);
 }
 
-static const struct qcom_smd_id qcom_smd_qrtr_smd_match[] = {
+static const struct rpmsg_device_id qcom_smd_qrtr_smd_match[] = {
 	{ "IPCRTR" },
 	{}
 };
 
-static struct qcom_smd_driver qcom_smd_qrtr_driver = {
+static struct rpmsg_driver qcom_smd_qrtr_driver = {
 	.probe = qcom_smd_qrtr_probe,
 	.remove = qcom_smd_qrtr_remove,
 	.callback = qcom_smd_qrtr_callback,
-	.smd_match_table = qcom_smd_qrtr_smd_match,
-	.driver = {
+	.id_table = qcom_smd_qrtr_smd_match,
+	.drv = {
 		.name = "qcom_smd_qrtr",
-		.owner = THIS_MODULE,
 	},
 };
 
-module_qcom_smd_driver(qcom_smd_qrtr_driver);
+module_rpmsg_driver(qcom_smd_qrtr_driver);
 
 MODULE_DESCRIPTION("Qualcomm IPC-Router SMD interface driver");
 MODULE_LICENSE("GPL v2");