diff mbox

[V2] brcmfmac: update BRCMFMAC symbol description

Message ID 20170323102928.11413-1-zajec5@gmail.com (mailing list archive)
State Accepted
Commit 1c92af00a56032c10d1a43277b39515393860b02
Delegated to: Kalle Valo
Headers show

Commit Message

Rafał Miłecki March 23, 2017, 10:29 a.m. UTC 
From: Rafał Miłecki <rafal@milecki.pl>

For quite some time now brcmfmac supports 802.11ac chipsets and it's
not limited to embedded devices only. There are even standalone PCIe
cards based on BCM43602 or BCM4366.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
V2: Drop "IEEE802.11n" part instead of "FullMAC" part, thanks Arend
---
 drivers/net/wireless/broadcom/brcm80211/Kconfig | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Kalle Valo April 5, 2017, 12:35 p.m. UTC | #1 
Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> For quite some time now brcmfmac supports 802.11ac chipsets and it's
> not limited to embedded devices only. There are even standalone PCIe
> cards based on BCM43602 or BCM4366.
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>

Patch applied to wireless-drivers-next.git, thanks.

1c92af00a560 brcmfmac: update BRCMFMAC symbol description
diff mbox

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig b/drivers/net/wireless/broadcom/brcm80211/Kconfig
index d93561f6ef97..4e5df0e15197 100644
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
@@ -18,14 +18,14 @@  config BRCMSMAC
 	  module, the driver will be called brcmsmac.ko.
 
 config BRCMFMAC
-	tristate "Broadcom IEEE802.11n embedded FullMAC WLAN driver"
+	tristate "Broadcom FullMAC WLAN driver"
 	depends on CFG80211
 	select BRCMUTIL
 	---help---
-	  This module adds support for embedded wireless adapters based on
-	  Broadcom IEEE802.11n FullMAC chipsets. It has to work with at least
-	  one of the bus interface support. If you choose to build a module,
-	  it'll be called brcmfmac.ko.
+	  This module adds support for wireless adapters based on Broadcom
+	  FullMAC chipsets. It has to work with at least one of the bus
+	  interface support. If you choose to build a module, it'll be called
+	  brcmfmac.ko.
 
 config BRCMFMAC_PROTO_BCDC
 	bool