diff mbox

[v4,7/9] NFC: trf7970a: Enable pins are active high not active low

Message ID 20170425184036.1212-8-mgreer@animalcreek.com (mailing list archive)
State Accepted
Delegated to: Samuel Ortiz
Headers show

Commit Message

Mark Greer April 25, 2017, 6:40 p.m. UTC 
The example DTS code for the trf7970a sets the GPIOs for the EN
and EN2 pins to active low when they are really active high so
correct the error.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
---
 Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
index 57cb52c94783..a24a93a4b010 100644
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -36,8 +36,8 @@  Example (for ARM-based BeagleBone with TRF7970A on SPI1):
 		spi-max-frequency = <2000000>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <14 0>;
-		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>,
-				  <&gpio2 5 GPIO_ACTIVE_LOW>;
+		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
+				  <&gpio2 5 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&ldo3_reg>;
 		vdd-io-supply = <&ldo2_reg>;
 		autosuspend-delay = <30000>;