@@ -435,6 +435,7 @@ struct brcmf_sdio_count {
struct brcmf_sdio {
struct brcmf_sdio_dev *sdiodev; /* sdio device handler */
struct brcmf_chip *ci; /* Chip info struct */
+ struct brcmf_core *sdio_core; /* sdio core info struct */
u32 hostintmask; /* Copy of Host Interrupt Mask */
atomic_t intstatus; /* Intstatus bits (events) pending */
@@ -662,10 +663,9 @@ static bool data_ok(struct brcmf_sdio *bus)
*/
static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
{
- struct brcmf_core *core;
+ struct brcmf_core *core = bus->sdio_core;
int ret;
- core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
*regvar = brcmf_sdiod_readl(bus->sdiodev, core->base + offset, &ret);
return ret;
@@ -673,10 +673,9 @@ static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
static int w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
{
- struct brcmf_core *core;
+ struct brcmf_core *core = bus->sdio_core;
int ret;
- core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
brcmf_sdiod_writel(bus->sdiodev, core->base + reg_offset, regval, &ret);
return ret;
@@ -2477,12 +2476,11 @@ static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus)
static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
{
- struct brcmf_core *buscore;
+ struct brcmf_core *buscore = bus->sdio_core;
u32 addr;
unsigned long val;
int ret;
- buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
addr = buscore->base + __sd_reg(intstatus);
val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret);
@@ -3357,13 +3355,14 @@ static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
/* enable KSO bit */
static int brcmf_sdio_kso_init(struct brcmf_sdio *bus)
{
+ struct brcmf_core *core = bus->sdio_core;
u8 val;
int err = 0;
brcmf_dbg(TRACE, "Enter\n");
/* KSO bit added in SDIO core rev 12 */
- if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12)
+ if (core->rev < 12)
return 0;
val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
@@ -3391,6 +3390,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
+ struct brcmf_core *core = bus->sdio_core;
uint pad_size;
u32 value;
int err;
@@ -3399,7 +3399,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
* a device perspective, ie. bus:txglom affects the
* bus transfers from device to host.
*/
- if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) {
+ if (core->rev < 12) {
/* for sdio core rev < 12, disable txgloming */
value = 0;
err = brcmf_iovar_data_set(dev, "bus:txglom", &value,
@@ -3735,11 +3735,10 @@ static void brcmf_sdio_buscore_activate(void *ctx, struct brcmf_chip *chip,
u32 rstvec)
{
struct brcmf_sdio_dev *sdiodev = ctx;
- struct brcmf_core *core;
+ struct brcmf_core *core = sdiodev->bus->sdio_core;
u32 reg_addr;
/* clear all interrupts */
- core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV);
reg_addr = core->base + __sd_reg(intstatus);
brcmf_sdiod_writel(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
@@ -3818,6 +3817,12 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
bus->ci = NULL;
goto fail;
}
+
+ /* Pick up the SDIO core info struct from chip.c */
+ bus->sdio_core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
+ if (!bus->sdio_core)
+ goto fail;
+
sdiodev->settings = brcmf_get_module_param(sdiodev->dev,
BRCMF_BUSTYPE_SDIO,
bus->ci->chip,
There is no need to repeatdly call brcmf_chip_get_core(), which traverses a list of cores every time its called (including during register access code!). Call it once, and store a pointer to the core structure. The existing code does nto keep track of users of the cores anyway, and even so, this will allow for easier refcounting in future. Signed-off-by: Ian Molton <ian@mnementh.co.uk> --- .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 25 +++++++++++++--------- 1 file changed, 15 insertions(+), 10 deletions(-)