@@ -5694,6 +5694,28 @@ void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie,
/**
+ * cfg80211_rx_control_port - notification about a received control port frame
+ * @dev: The device the frame matched to
+ * @buf: control port frame
+ * @len: length of the frame data
+ * @addr: The peer from which the frame was received
+ * @proto: frame protocol, typically PAE or Pre-authentication
+ * @unencrypted: Whether the frame was received unencrypted
+ *
+ * This function is used to inform userspace about a received control port
+ * frame. It should only be used if userspace indicated it wants to receive
+ * control port frames over NL80211.
+ *
+ * The frame is the data portion of the 802.3 or 802.11 data frame with all
+ * network layer headers removed (e.g. the raw EAPoL frame).
+ *
+ * Return: %true if the frame was passed to userspace
+ */
+bool cfg80211_rx_control_port(struct net_device *dev,
+ const u8 *buf, size_t len,
+ const u8 *addr, u16 proto, bool unencrypted);
+
+/**
* cfg80211_cqm_rssi_notify - connection quality monitoring rssi event
* @dev: network device
* @rssi_event: the triggered RSSI event
@@ -990,6 +990,17 @@
* &NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed
* &NL80211_CMD_DISCONNECT should be indicated instead.
*
+ * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
+ * and RX notification. This command is used both as a request to transmit
+ * a control port frame and as a notification that a control port frame
+ * has been received. %NL80211_ATTR_FRAME is used to specify the
+ * frame contents. The frame is the raw EAPoL data, without ethernet or
+ * 802.11 headers.
+ * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added
+ * indicating the protocol type of the received frame; whether the frame
+ * was received unencrypted and the MAC address of the peer respectively.
+ *
* @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
*
* @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host
@@ -1228,6 +1239,8 @@ enum nl80211_commands {
NL80211_CMD_STA_OPMODE_CHANGED,
+ NL80211_CMD_CONTROL_PORT_FRAME,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -14535,6 +14535,64 @@ void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie,
}
EXPORT_SYMBOL(cfg80211_mgmt_tx_status);
+static int __nl80211_rx_control_port(struct net_device *dev,
+ const u8 *buf, size_t len,
+ const u8 *addr, u16 proto,
+ bool unencrypted, gfp_t gfp)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
+ struct sk_buff *msg;
+ void *hdr;
+ u32 nlportid = READ_ONCE(wdev->conn_owner_nlportid);
+
+ if (!nlportid)
+ return -ENOENT;
+
+ msg = nlmsg_new(100 + len, gfp);
+ if (!msg)
+ return -ENOMEM;
+
+ hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_CONTROL_PORT_FRAME);
+ if (!hdr) {
+ nlmsg_free(msg);
+ return -ENOMEM;
+ }
+
+ if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
+ nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
+ nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
+ NL80211_ATTR_PAD) ||
+ nla_put(msg, NL80211_ATTR_FRAME, len, buf) ||
+ nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, addr) ||
+ nla_put_u16(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE, proto) ||
+ (unencrypted && nla_put_flag(msg,
+ NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT)))
+ goto nla_put_failure;
+
+ genlmsg_end(msg, hdr);
+
+ return genlmsg_unicast(wiphy_net(&rdev->wiphy), msg, nlportid);
+
+ nla_put_failure:
+ nlmsg_free(msg);
+ return -ENOBUFS;
+}
+
+bool cfg80211_rx_control_port(struct net_device *dev,
+ const u8 *buf, size_t len,
+ const u8 *addr, u16 proto, bool unencrypted)
+{
+ int ret;
+
+ trace_cfg80211_rx_control_port(dev, buf, len, addr, proto, unencrypted);
+ ret = __nl80211_rx_control_port(dev, buf, len, addr, proto,
+ unencrypted, GFP_ATOMIC);
+ trace_cfg80211_return_bool(ret == 0);
+ return ret;
+}
+EXPORT_SYMBOL(cfg80211_rx_control_port);
+
static struct sk_buff *cfg80211_prepare_cqm(struct net_device *dev,
const char *mac, gfp_t gfp)
{
@@ -2600,6 +2600,27 @@ TRACE_EVENT(cfg80211_mgmt_tx_status,
WDEV_PR_ARG, __entry->cookie, BOOL_TO_STR(__entry->ack))
);
+TRACE_EVENT(cfg80211_rx_control_port,
+ TP_PROTO(struct net_device *netdev, const u8 *buf, size_t len,
+ const u8 *addr, u16 proto, bool unencrypted),
+ TP_ARGS(netdev, buf, len, addr, proto, unencrypted),
+ TP_STRUCT__entry(
+ NETDEV_ENTRY
+ MAC_ENTRY(addr)
+ __field(u16, proto)
+ __field(bool, unencrypted)
+ ),
+ TP_fast_assign(
+ NETDEV_ASSIGN;
+ MAC_ASSIGN(addr, addr);
+ __entry->proto = proto;
+ __entry->unencrypted = unencrypted;
+ ),
+ TP_printk(NETDEV_PR_FMT ", " MAC_PR_FMT " proto: %x, unencrypted: %s",
+ NETDEV_PR_ARG, MAC_PR_ARG(addr),
+ __entry->proto, BOOL_TO_STR(__entry->unencrypted))
+);
+
TRACE_EVENT(cfg80211_cqm_rssi_notify,
TP_PROTO(struct net_device *netdev,
enum nl80211_cqm_rssi_threshold_event rssi_event,
This commit also adds cfg80211_rx_control_port function. This is used to generate a CMD_CONTROL_PORT_FRAME event out to userspace. The conn_owner_nlportid is used as the unicast destination. This means that userspace must specify NL80211_ATTR_SOCKET_OWNER flag if control port over nl80211 routing is requested in NL80211_CMD_CONNECT, NL80211_CMD_ASSOCIATE or NL80211_CMD_START_AP Signed-off-by: Denis Kenzior <denkenz@gmail.com> --- include/net/cfg80211.h | 22 +++++++++++++++++ include/uapi/linux/nl80211.h | 13 ++++++++++ net/wireless/nl80211.c | 58 ++++++++++++++++++++++++++++++++++++++++++++ net/wireless/trace.h | 21 ++++++++++++++++ 4 files changed, 114 insertions(+)