@@ -9,4 +9,3 @@ obj-$(CONFIG_VLAN_8021Q) += 8021q.o
8021q-$(CONFIG_VLAN_8021Q_GVRP) += vlan_gvrp.o
8021q-$(CONFIG_VLAN_8021Q_MVRP) += vlan_mvrp.o
8021q-$(CONFIG_PROC_FS) += vlanproc.o
-
@@ -12,7 +12,7 @@ menuconfig NET
The reason is that some programs need kernel networking support even
when running on a stand-alone machine that isn't connected to any
other computer.
-
+
If you are upgrading from an older kernel, you
should consider updating your networking tools too because changes
in the kernel and the tools often go hand in hand. The tools are
@@ -3274,4 +3274,3 @@ static int __init neigh_init(void)
}
subsys_initcall(neigh_init);
-
@@ -320,4 +320,3 @@ static void __exit exit_dns_resolver(void)
module_init(init_dns_resolver)
module_exit(exit_dns_resolver)
MODULE_LICENSE("GPL");
-
@@ -400,4 +400,3 @@ module_exit(wpan_phy_class_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("IEEE 802.15.4 configuration interface");
MODULE_AUTHOR("Dmitry Eremin-Solenikov");
-
@@ -75,4 +75,3 @@ const struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
[IEEE802154_ATTR_LLSEC_DEV_OVERRIDE] = { .type = NLA_U8, },
[IEEE802154_ATTR_LLSEC_DEV_KEY_MODE] = { .type = NLA_U8, },
};
-
@@ -430,7 +430,7 @@ config INET_DIAG
Support for INET (TCP, DCCP, etc) socket monitoring interface used by
native Linux tools such as ss. ss is included in iproute2, currently
downloadable at:
-
+
http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2
If unsure, say Y.
@@ -600,7 +600,7 @@ config TCP_CONG_VENO
distinguishing to circumvent the difficult judgment of the packet loss
type. TCP Veno cuts down less congestion window in response to random
loss packets.
- See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186>
+ See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186>
config TCP_CONG_YEAH
tristate "YeAH TCP"
@@ -43,7 +43,7 @@ obj-$(CONFIG_INET_XFRM_MODE_TRANSPORT) += xfrm4_mode_transport.o
obj-$(CONFIG_INET_XFRM_MODE_TUNNEL) += xfrm4_mode_tunnel.o
obj-$(CONFIG_IP_PNP) += ipconfig.o
obj-$(CONFIG_NETFILTER) += netfilter.o netfilter/
-obj-$(CONFIG_INET_DIAG) += inet_diag.o
+obj-$(CONFIG_INET_DIAG) += inet_diag.o
obj-$(CONFIG_INET_TCP_DIAG) += tcp_diag.o
obj-$(CONFIG_INET_UDP_DIAG) += udp_diag.o
obj-$(CONFIG_INET_RAW_DIAG) += raw_diag.o
@@ -15,7 +15,7 @@ menuconfig IPV6
Documentation/networking/ipv6.txt and read the HOWTO at
<http://www.tldp.org/HOWTO/Linux+IPv6-HOWTO/>
- To compile this protocol support as a module, choose M here: the
+ To compile this protocol support as a module, choose M here: the
module will be called ipv6.
if IPV6
@@ -2515,4 +2515,3 @@ MODULE_DESCRIPTION("IUCV Sockets ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS_NETPROTO(PF_IUCV);
-
@@ -8,4 +8,3 @@ config AF_KCM
KCM (Kernel Connection Multiplexor) sockets provide a method
for multiplexing messages of a message based application
protocol over kernel connectons (e.g. TCP connections).
-
@@ -2104,4 +2104,3 @@ module_exit(kcm_exit);
MODULE_LICENSE("GPL");
MODULE_ALIAS_NETPROTO(PF_KCM);
-
@@ -751,4 +751,3 @@ rc80211_minstrel_exit(void)
{
ieee80211_rate_control_unregister(&mac80211_minstrel);
}
-
Several files have extra line at end of file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> --- net/8021q/Makefile | 1 - net/Kconfig | 2 +- net/core/neighbour.c | 1 - net/dns_resolver/dns_key.c | 1 - net/ieee802154/core.c | 1 - net/ieee802154/nl_policy.c | 1 - net/ipv4/Kconfig | 4 ++-- net/ipv4/Makefile | 2 +- net/ipv6/Kconfig | 2 +- net/iucv/af_iucv.c | 1 - net/kcm/Kconfig | 1 - net/kcm/kcmsock.c | 1 - net/mac80211/rc80211_minstrel.c | 1 - 13 files changed, 5 insertions(+), 14 deletions(-)