@@ -54,3 +54,5 @@ brcmfmac-$(CONFIG_BRCM_TRACING) += \
tracepoint.o
brcmfmac-$(CONFIG_OF) += \
of.o
+brcmfmac-$(CONFIG_DMI) += \
+ dmi.o
@@ -450,8 +450,9 @@ struct brcmf_mp_device *brcmf_get_module_param(struct device *dev,
}
}
if (!found) {
- /* No platform data for this device, try OF (Open Firwmare) */
+ /* No platform data for this device, try OF and DMI data */
brcmf_of_probe(dev, bus_type, settings);
+ brcmf_dmi_probe(settings, chip, chiprev);
}
return settings;
}
@@ -75,4 +75,11 @@ void brcmf_release_module_param(struct brcmf_mp_device *module_param);
/* Sets dongle media info (drv_version, mac address). */
int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
+#ifdef CONFIG_DMI
+void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev);
+#else
+static inline void
+brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev) {}
+#endif
+
#endif /* BRCMFMAC_COMMON_H */
new file mode 100644
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2018 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/dmi.h>
+#include <linux/mod_devicetable.h>
+#include "core.h"
+#include "common.h"
+#include "brcm_hw_ids.h"
+
+/* The DMI data never changes so we can use a static buf for this */
+static char dmi_board_type[128];
+
+struct brcmf_dmi_data {
+ u32 chip;
+ u32 chiprev;
+ const char *board_type;
+};
+
+/* NOTE: Please keep all entries sorted alphabetically */
+
+static const struct brcmf_dmi_data gpd_win_pocket_data = {
+ BRCM_CC_4356_CHIP_ID, 2, "gpd-win-pocket"
+};
+
+static const struct brcmf_dmi_data jumper_ezpad_mini3_data = {
+ BRCM_CC_43430_CHIP_ID, 0, "jumper-ezpad-mini3"
+};
+
+static const struct brcmf_dmi_data meegopad_t08_data = {
+ BRCM_CC_43340_CHIP_ID, 2, "meegopad-t08"
+};
+
+static const struct dmi_system_id dmi_platform_data[] = {
+ {
+ /* Match for the GPDwin which unfortunately uses somewhat
+ * generic dmi strings, which is why we test for 4 strings.
+ * Comparing against 23 other byt/cht boards, board_vendor
+ * and board_name are unique to the GPDwin, where as only one
+ * other board has the same board_serial and 3 others have
+ * the same default product_name. Also the GPDwin is the
+ * only device to have both board_ and product_name not set.
+ */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "Default string"),
+ DMI_MATCH(DMI_BOARD_SERIAL, "Default string"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
+ },
+ .driver_data = (void *)&gpd_win_pocket_data,
+ },
+ {
+ /* Jumper EZpad mini3 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "CherryTrail"),
+ /* jumperx.T87.KFBNEEA02 with the version-nr dropped */
+ DMI_MATCH(DMI_BIOS_VERSION, "jumperx.T87.KFBNEEA"),
+ },
+ .driver_data = (void *)&jumper_ezpad_mini3_data,
+ },
+ {
+ /* Meegopad T08 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Default string"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
+ DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"),
+ DMI_MATCH(DMI_BOARD_VERSION, "V1.1"),
+ },
+ .driver_data = (void *)&meegopad_t08_data,
+ },
+ {}
+};
+
+void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev)
+{
+ const struct dmi_system_id *match;
+ const struct brcmf_dmi_data *data;
+ const char *sys_vendor;
+ const char *product_name;
+
+ /* Some models have DMI strings which are too generic, e.g.
+ * "Default string", we use a quirk table for these.
+ */
+ for (match = dmi_first_match(dmi_platform_data);
+ match;
+ match = dmi_first_match(match + 1)) {
+ data = match->driver_data;
+
+ if (data->chip == chip && data->chiprev == chiprev) {
+ settings->board_type = data->board_type;
+ return;
+ }
+ }
+
+ /* Not found in the quirk-table, use sys_vendor-product_name */
+ sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ if (sys_vendor && product_name) {
+ snprintf(dmi_board_type, sizeof(dmi_board_type), "%s-%s",
+ sys_vendor, product_name);
+ settings->board_type = dmi_board_type;
+ }
+}
For x86 based machines, set the board_type used for nvram file selection based on the DMI sys-vendor and product-name strings. Since on some models these strings are too generic, this commit also adds a quirk table overriding the strings for models listed in that table. The board_type setting is used to load the board-specific nvram file with a board-specific name so that we can ship files for each supported board in linux-firmware. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: -Use full ISC text for now instead of SPDX tag, because the ISC is not yet listed under LICENSES --- .../broadcom/brcm80211/brcmfmac/Makefile | 2 + .../broadcom/brcm80211/brcmfmac/common.c | 3 +- .../broadcom/brcm80211/brcmfmac/common.h | 7 ++ .../broadcom/brcm80211/brcmfmac/dmi.c | 116 ++++++++++++++++++ 4 files changed, 127 insertions(+), 1 deletion(-) create mode 100644 drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c