diff mbox series

[v2,3/5] ath10k: sdio: read RX packets in bundles

Message ID 20190417191503.18814-4-erik.stromdahl@gmail.com (mailing list archive)
State Superseded
Delegated to: Kalle Valo
Headers show
Series ath10k: SDIO and high latency patches from Silex | expand

Commit Message

Erik Stromdahl April 17, 2019, 7:15 p.m. UTC 
From: Alagu Sankar <alagusankar@silex-india.com>

The existing implementation of initiating multiple sdio transfers for
receive bundling is slowing down the receive speed.

Instead of having one sdio transfer for each packet in the bundle, we
read all packets in one sdio transfer.

This results in significant performance improvement on some targets.

On an imx6dl together with a QCA9377 SDIO device, the following
performance increase was obtained with iperf:

Before:

[  3]  0.0- 1.0 sec  3.38 MBytes  28.3 Mbits/sec

After:

[  3]  0.0- 1.0 sec  7.12 MBytes  59.8 Mbits/sec

Co-developed-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
---
 drivers/net/wireless/ath/ath10k/sdio.c | 71 +++++++++++++++++++++-----
 drivers/net/wireless/ath/ath10k/sdio.h |  2 +
 2 files changed, 60 insertions(+), 13 deletions(-)

Comments

Kalle Valo Sept. 25, 2019, 5:51 a.m. UTC | #1 
Kalle Valo <kvalo@codeaurora.org> writes:

> Erik Stromdahl <erik.stromdahl@gmail.com> wrote:
>
>> From: Alagu Sankar <alagusankar@silex-india.com>
>> 
>> The existing implementation of initiating multiple sdio transfers for
>> receive bundling is slowing down the receive speed.
>> 
>> Instead of having one sdio transfer for each packet in the bundle, we
>> read all packets in one sdio transfer.
>> 
>> This results in significant performance improvement on some targets.
>> 
>> On an imx6dl together with a QCA9377 SDIO device, the following
>> performance increase was obtained with iperf:
>> 
>> Before:
>> 
>> [  3]  0.0- 1.0 sec  3.38 MBytes  28.3 Mbits/sec
>> 
>> After:
>> 
>> [  3]  0.0- 1.0 sec  7.12 MBytes  59.8 Mbits/sec
>> 
>> Co-developed-by: Erik Stromdahl <erik.stromdahl@gmail.com>
>> Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
>> Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
>
> Wen is working on this:
>
> [v5,2/8] ath10k: enable RX bundle receive for sdio
>
> https://patchwork.kernel.org/patch/11132661/
>
> So I'll drop this version. Patch set to Superseded.

There were invalid characters and linux-wireless dropped my mail,
resending now.
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index d5073fac9509..b89732aad97c 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -24,6 +24,8 @@ 
 #include "trace.h"
 #include "sdio.h"
 
+#define ATH10K_SDIO_READ_BUF_SIZE	(32 * 1024)
+
 /* inlined helper functions */
 
 static inline int ath10k_sdio_calc_txrx_padded_len(struct ath10k_sdio *ar_sdio,
@@ -618,41 +620,73 @@  static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 	return ret;
 }
 
-static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar,
-				      struct ath10k_sdio_rx_data *pkt)
+static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar)
 {
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
+	struct ath10k_sdio_rx_data *pkt = &ar_sdio->rx_pkts[0];
 	struct sk_buff *skb = pkt->skb;
 	int ret;
 
-	ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
-				 skb->data, pkt->alloc_len);
+	ret = ath10k_sdio_read(ar, ar_sdio->mbox_info.htc_addr,
+			       skb->data, pkt->alloc_len);
+	if (ret) {
+		ath10k_warn(ar, "sdio_read error %d\n", ret);
+		goto err;
+	}
+
 	pkt->status = ret;
-	if (!ret)
-		skb_put(skb, pkt->act_len);
+	skb_put(skb, pkt->act_len);
 
+	return 0;
+
+err:
+	ar_sdio->n_rx_pkts = 0;
+	ath10k_sdio_mbox_free_rx_pkt(pkt);
 	return ret;
 }
 
-static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar)
+static int ath10k_sdio_mbox_rx_fetch_bundle(struct ath10k *ar)
 {
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
+	struct ath10k_sdio_rx_data *pkt;
 	int ret, i;
+	u32 pkt_offset = 0, pkt_bundle_len = 0;
+
+	for (i = 0; i < ar_sdio->n_rx_pkts; i++)
+		pkt_bundle_len += ar_sdio->rx_pkts[i].alloc_len;
+
+	if (pkt_bundle_len > ATH10K_SDIO_READ_BUF_SIZE) {
+		ret = -ENOSPC;
+		ath10k_warn(ar, "bundle size (%d) exceeding limit %d\n",
+			    pkt_bundle_len, ATH10K_SDIO_READ_BUF_SIZE);
+		goto err;
+	}
+
+	ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
+				 ar_sdio->sdio_read_buf, pkt_bundle_len);
+	if (ret)
+		goto err;
 
 	for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
-		ret = ath10k_sdio_mbox_rx_packet(ar,
-						 &ar_sdio->rx_pkts[i]);
-		if (ret)
-			goto err;
+		struct sk_buff *skb = ar_sdio->rx_pkts[i].skb;
+
+		pkt = &ar_sdio->rx_pkts[i];
+		skb_put(skb, pkt->act_len);
+		memcpy(skb->data, ar_sdio->sdio_read_buf + pkt_offset,
+		       pkt->alloc_len);
+		pkt->status = 0;
+		pkt_offset += pkt->alloc_len;
 	}
 
 	return 0;
 
 err:
 	/* Free all packets that was not successfully fetched. */
-	for (; i < ar_sdio->n_rx_pkts; i++)
+	for (i = 0; i < ar_sdio->n_rx_pkts; i++)
 		ath10k_sdio_mbox_free_rx_pkt(&ar_sdio->rx_pkts[i]);
 
+	ar_sdio->n_rx_pkts = 0;
+
 	return ret;
 }
 
@@ -695,7 +729,10 @@  static int ath10k_sdio_mbox_rxmsg_pending_handler(struct ath10k *ar,
 			 */
 			*done = false;
 
-		ret = ath10k_sdio_mbox_rx_fetch(ar);
+		if (ar_sdio->n_rx_pkts > 1)
+			ret = ath10k_sdio_mbox_rx_fetch_bundle(ar);
+		else
+			ret = ath10k_sdio_mbox_rx_fetch(ar);
 
 		/* Process fetched packets. This will potentially update
 		 * n_lookaheads depending on if the packets contain lookahead
@@ -2001,6 +2038,14 @@  static int ath10k_sdio_probe(struct sdio_func *func,
 		goto err_core_destroy;
 	}
 
+	ar_sdio->sdio_read_buf = devm_kzalloc(ar->dev,
+					      ATH10K_SDIO_READ_BUF_SIZE,
+					      GFP_KERNEL);
+	if (!ar_sdio->sdio_read_buf) {
+		ret = -ENOMEM;
+		goto err_core_destroy;
+	}
+
 	ar_sdio->func = func;
 	sdio_set_drvdata(func, ar_sdio);
 
diff --git a/drivers/net/wireless/ath/ath10k/sdio.h b/drivers/net/wireless/ath/ath10k/sdio.h
index b8c7ac0330bd..07e2cc6a3bd8 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.h
+++ b/drivers/net/wireless/ath/ath10k/sdio.h
@@ -196,6 +196,8 @@  struct ath10k_sdio {
 	struct ath10k *ar;
 	struct ath10k_sdio_irq_data irq_data;
 
+	u8 *sdio_read_buf;
+
 	/* temporary buffer for BMI requests */
 	u8 *bmi_buf;