@@ -1000,7 +1000,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (WARN_ONCE(!cfg->trans.csr, "CSR addresses aren't configured\n"))
return -EINVAL;
- iwl_trans = iwl_trans_pcie_alloc(pdev, ent, cfg);
+ iwl_trans = iwl_trans_pcie_alloc(pdev, ent, &cfg->trans);
if (IS_ERR(iwl_trans))
return PTR_ERR(iwl_trans);
@@ -635,9 +635,10 @@ iwl_trans_pcie_get_trans(struct iwl_trans_pcie *trans_pcie)
* Convention: trans API functions: iwl_trans_pcie_XXX
* Other functions: iwl_pcie_XXX
*/
-struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
- const struct pci_device_id *ent,
- const struct iwl_cfg *cfg);
+struct iwl_trans
+*iwl_trans_pcie_alloc(struct pci_dev *pdev,
+ const struct pci_device_id *ent,
+ const struct iwl_cfg_trans_params *cfg_trans);
void iwl_trans_pcie_free(struct iwl_trans *trans);
/*****************************************************
@@ -3373,8 +3373,8 @@ static const struct iwl_trans_ops trans_ops_pcie_gen2 = {
};
struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
- const struct pci_device_id *ent,
- const struct iwl_cfg *cfg)
+ const struct pci_device_id *ent,
+ const struct iwl_cfg_trans_params *cfg_trans)
{
struct iwl_trans_pcie *trans_pcie;
struct iwl_trans *trans;
@@ -3384,7 +3384,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
if (ret)
return ERR_PTR(ret);
- if (cfg->trans.gen2)
+ if (cfg_trans->gen2)
trans = iwl_trans_alloc(sizeof(struct iwl_trans_pcie),
&pdev->dev, &trans_ops_pcie_gen2);
else
@@ -3409,7 +3409,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
}
trans_pcie->debug_rfkill = -1;
- if (!cfg->trans.base_params->pcie_l1_allowed) {
+ if (!cfg_trans->base_params->pcie_l1_allowed) {
/*
* W/A - seems to solve weird behavior. We need to remove this
* if we don't want to stay in L1 all the time. This wastes a
@@ -3422,7 +3422,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
trans_pcie->def_rx_queue = 0;
- if (cfg->trans.use_tfh) {
+ if (cfg_trans->use_tfh) {
addr_size = 64;
trans_pcie->max_tbs = IWL_TFH_NUM_TBS;
trans_pcie->tfd_size = sizeof(struct iwl_tfh_tfd);
@@ -3484,7 +3484,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
* "dash" value). To keep hw_rev backwards compatible - we'll store it
* in the old format.
*/
- if (cfg->trans.device_family >= IWL_DEVICE_FAMILY_8000) {
+ if (cfg_trans->device_family >= IWL_DEVICE_FAMILY_8000) {
trans->hw_rev = (trans->hw_rev & 0xfff0) |
(CSR_HW_REV_STEP(trans->hw_rev << 2) << 2);
@@ -3498,7 +3498,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
* in-order to recognize C step driver should read chip version
* id located at the AUX bus MISC address space.
*/
- ret = iwl_finish_nic_init(trans, &cfg->trans);
+ ret = iwl_finish_nic_init(trans, cfg_trans);
if (ret)
goto out_no_pci;
@@ -3506,7 +3506,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
IWL_DEBUG_INFO(trans, "HW REV: 0x%0x\n", trans->hw_rev);
- iwl_pcie_set_interrupt_capa(pdev, trans, &cfg->trans);
+ iwl_pcie_set_interrupt_capa(pdev, trans, cfg_trans);
trans->hw_id = (pdev->device << 16) + pdev->subsystem_device;
snprintf(trans->hw_id_str, sizeof(trans->hw_id_str),
"PCI ID: 0x%04X:0x%04X", pdev->device, pdev->subsystem_device);