diff mbox series

[08/10] rtw88: pci: config phy after chip info is setup

Message ID 20191008082101.2494-9-yhchuang@realtek.com (mailing list archive)
State Accepted
Commit 474264d5a6b7db4d6c1a1ba1464812addbb7f974
Delegated to: Kalle Valo
Headers show
Series rtw88: minor throughput improvement | expand

Commit Message

Tony Chuang Oct. 8, 2019, 8:20 a.m. UTC 
From: Yan-Hsuan Chuang <yhchuang@realtek.com>

Chip info such as cut_version is required to configure
PCI phy. Move rtw_pci_phy_config after rtw_chip_info_setup.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
---
 drivers/net/wireless/realtek/rtw88/pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c
index 772a14d851fc..17b9cdf9cb05 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.c
+++ b/drivers/net/wireless/realtek/rtw88/pci.c
@@ -1190,8 +1190,6 @@  static int rtw_pci_setup_resource(struct rtw_dev *rtwdev, struct pci_dev *pdev)
 		goto err_io_unmap;
 	}
 
-	rtw_pci_phy_cfg(rtwdev);
-
 	return 0;
 
 err_io_unmap:
@@ -1304,6 +1302,8 @@  static int rtw_pci_probe(struct pci_dev *pdev,
 		goto err_destroy_pci;
 	}
 
+	rtw_pci_phy_cfg(rtwdev);
+
 	ret = rtw_register_hw(rtwdev, hw);
 	if (ret) {
 		rtw_err(rtwdev, "failed to register hw\n");