diff mbox series

[v9,1/6] mt76: mt76x02: ommit beacon slot clearing

Message ID 20191126214704.27297-2-markus.theil@tu-ilmenau.de (mailing list archive)
State Superseded
Delegated to: Felix Fietkau
Headers show
Series mt76: channel switch support for USB devices | expand

Commit Message

Markus Theil Nov. 26, 2019, 9:46 p.m. UTC 
mt76 hw does not send beacons from beacon slots, if the corresponding
bitmask is set accordingly. Therefore we can ommit clearing the beacon
memory. Clearing uses many usb calls, if usb drivers are used. These
calls unnecessarily slow down the beacon tasklet. Thanks to Stanislaw
Gruzska for pointing this out.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
---
 drivers/net/wireless/mediatek/mt76/mt76x02_beacon.c | 8 --------
 1 file changed, 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_beacon.c b/drivers/net/wireless/mediatek/mt76/mt76x02_beacon.c
index 4209209ac940..403866496640 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_beacon.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_beacon.c
@@ -58,8 +58,6 @@  __mt76x02_mac_set_beacon(struct mt76x02_dev *dev, u8 bcn_idx,
 			dev->beacon_data_mask |= BIT(bcn_idx);
 	} else {
 		dev->beacon_data_mask &= ~BIT(bcn_idx);
-		for (i = 0; i < beacon_len; i += 4)
-			mt76_wr(dev, beacon_addr + i, 0);
 	}
 
 	mt76_wr(dev, MT_BCN_BYPASS_MASK, 0xff00 | ~dev->beacon_data_mask);
@@ -241,17 +239,11 @@  EXPORT_SYMBOL_GPL(mt76x02_enqueue_buffered_bc);
 
 void mt76x02_init_beacon_config(struct mt76x02_dev *dev)
 {
-	int i;
-
 	mt76_clear(dev, MT_BEACON_TIME_CFG, (MT_BEACON_TIME_CFG_TIMER_EN |
 					     MT_BEACON_TIME_CFG_TBTT_EN |
 					     MT_BEACON_TIME_CFG_BEACON_TX));
 	mt76_set(dev, MT_BEACON_TIME_CFG, MT_BEACON_TIME_CFG_SYNC_MODE);
 	mt76_wr(dev, MT_BCN_BYPASS_MASK, 0xffff);
-
-	for (i = 0; i < 8; i++)
-		mt76x02_mac_set_beacon(dev, i, NULL);
-
 	mt76x02_set_beacon_offsets(dev);
 }
 EXPORT_SYMBOL_GPL(mt76x02_init_beacon_config);