staging: wilc1000: refactor SPI read/write commands handling API's

Commit Message

Ajay Singh Feb. 3, 2020, 10:39 a.m. UTC

From: Ajay Singh <[e-mail]>

Refactor SPI commands handling by making use of 'struct' for data
exchange and extraction of information flow between host and firmware.
The SPI read/write commands are now handled in separate function instead
of using a single function to process all types of command.
The use of 'struct' helped to make the code self explanatory. These
points were discussed and suggested during code review [1].

1. https://www.spinics.net/lists/linux-wireless/msg191489.html

Signed-off-by: Ajay Singh <[e-mail]>
---
 drivers/staging/wilc1000/spi.c | 754 ++++++++++++++++-----------------
 1 file changed, 374 insertions(+), 380 deletions(-)

Patch

diff --git a/drivers/staging/wilc1000/spi.c b/drivers/staging/wilc1000/spi.c
index 3ffc7b4fddf6..9a9f3624e158 100644
--- a/drivers/staging/wilc1000/spi.c
+++ b/drivers/staging/wilc1000/spi.c
@@ -70,6 +70,11 @@  static u8 crc7(u8 crc, const u8 *buffer, u32 len)
 	return crc;
 }
 
+static u8 wilc_get_crc7(u8 *buffer, u32 len)
+{
+	return crc7(0x7f, (const u8 *)buffer, len) << 1;
+}
+
 /********************************************
  *
  *      Spi protocol Function
@@ -97,6 +102,52 @@  static u8 crc7(u8 crc, const u8 *buffer, u32 len)
 
 #define USE_SPI_DMA				0
 
+#define WILC_SPI_COMMAND_STAT_SUCCESS		0
+#define WILC_GET_RESP_HDR_START(h)		(((h) >> 4) & 0xf)
+
+struct wilc_spi_cmd {
+	u8 cmd_type;
+	union {
+		struct {
+			u8 addr[3];
+			u8 crc[0];
+		} __packed simple_cmd;
+		struct {
+			u8 addr[3];
+			u8 size[2];
+			u8 crc[0];
+		} __packed dma_cmd;
+		struct {
+			u8 addr[3];
+			u8 size[3];
+			u8 crc[0];
+		} __packed dma_cmd_ext;
+		struct {
+			u8 addr[2];
+			__be32 data;
+			u8 crc[0];
+		} __packed internal_w_cmd;
+		struct {
+			u8 addr[3];
+			__be32 data;
+			u8 crc[0];
+		} __packed w_cmd;
+	} u;
+} __packed;
+
+struct wilc_spi_read_rsp_data {
+	u8 rsp_cmd_type;
+	u8 status;
+	u8 resp_header;
+	u8 resp_data[4];
+	u8 crc[0];
+} __packed;
+
+struct wilc_spi_rsp_data {
+	u8 rsp_cmd_type;
+	u8 status;
+} __packed;
+
 static int wilc_bus_probe(struct spi_device *spi)
 {
 	int ret;
@@ -284,335 +335,6 @@  static int wilc_spi_tx_rx(struct wilc *wilc, u8 *wb, u8 *rb, u32 rlen)
 	return ret;
 }
 
-static int spi_cmd_complete(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz,
-			    u8 clockless)
-{
-	struct spi_device *spi = to_spi_device(wilc->dev);
-	struct wilc_spi *spi_priv = wilc->bus_data;
-	u8 wb[32], rb[32];
-	u8 wix, rix;
-	u32 len2;
-	u8 rsp;
-	int len = 0;
-	int result = 0;
-	int retry;
-	u8 crc[2];
-
-	wb[0] = cmd;
-	switch (cmd) {
-	case CMD_SINGLE_READ: /* single word (4 bytes) read */
-		wb[1] = (u8)(adr >> 16);
-		wb[2] = (u8)(adr >> 8);
-		wb[3] = (u8)adr;
-		len = 5;
-		break;
-
-	case CMD_INTERNAL_READ: /* internal register read */
-		wb[1] = (u8)(adr >> 8);
-		if (clockless == 1)
-			wb[1] |= BIT(7);
-		wb[2] = (u8)adr;
-		wb[3] = 0x00;
-		len = 5;
-		break;
-
-	case CMD_TERMINATE:
-		wb[1] = 0x00;
-		wb[2] = 0x00;
-		wb[3] = 0x00;
-		len = 5;
-		break;
-
-	case CMD_REPEAT:
-		wb[1] = 0x00;
-		wb[2] = 0x00;
-		wb[3] = 0x00;
-		len = 5;
-		break;
-
-	case CMD_RESET:
-		wb[1] = 0xff;
-		wb[2] = 0xff;
-		wb[3] = 0xff;
-		len = 5;
-		break;
-
-	case CMD_DMA_WRITE: /* dma write */
-	case CMD_DMA_READ:  /* dma read */
-		wb[1] = (u8)(adr >> 16);
-		wb[2] = (u8)(adr >> 8);
-		wb[3] = (u8)adr;
-		wb[4] = (u8)(sz >> 8);
-		wb[5] = (u8)(sz);
-		len = 7;
-		break;
-
-	case CMD_DMA_EXT_WRITE: /* dma extended write */
-	case CMD_DMA_EXT_READ:  /* dma extended read */
-		wb[1] = (u8)(adr >> 16);
-		wb[2] = (u8)(adr >> 8);
-		wb[3] = (u8)adr;
-		wb[4] = (u8)(sz >> 16);
-		wb[5] = (u8)(sz >> 8);
-		wb[6] = (u8)(sz);
-		len = 8;
-		break;
-
-	case CMD_INTERNAL_WRITE: /* internal register write */
-		wb[1] = (u8)(adr >> 8);
-		if (clockless == 1)
-			wb[1] |= BIT(7);
-		wb[2] = (u8)(adr);
-		wb[3] = b[3];
-		wb[4] = b[2];
-		wb[5] = b[1];
-		wb[6] = b[0];
-		len = 8;
-		break;
-
-	case CMD_SINGLE_WRITE: /* single word write */
-		wb[1] = (u8)(adr >> 16);
-		wb[2] = (u8)(adr >> 8);
-		wb[3] = (u8)(adr);
-		wb[4] = b[3];
-		wb[5] = b[2];
-		wb[6] = b[1];
-		wb[7] = b[0];
-		len = 9;
-		break;
-
-	default:
-		result = -EINVAL;
-		break;
-	}
-
-	if (result)
-		return result;
-
-	if (!spi_priv->crc_off)
-		wb[len - 1] = (crc7(0x7f, (const u8 *)&wb[0], len - 1)) << 1;
-	else
-		len -= 1;
-
-#define NUM_SKIP_BYTES (1)
-#define NUM_RSP_BYTES (2)
-#define NUM_DATA_HDR_BYTES (1)
-#define NUM_DATA_BYTES (4)
-#define NUM_CRC_BYTES (2)
-#define NUM_DUMMY_BYTES (3)
-	if (cmd == CMD_RESET ||
-	    cmd == CMD_TERMINATE ||
-	    cmd == CMD_REPEAT) {
-		len2 = len + (NUM_SKIP_BYTES + NUM_RSP_BYTES + NUM_DUMMY_BYTES);
-	} else if (cmd == CMD_INTERNAL_READ || cmd == CMD_SINGLE_READ) {
-		int tmp = NUM_RSP_BYTES + NUM_DATA_HDR_BYTES + NUM_DATA_BYTES
-			+ NUM_DUMMY_BYTES;
-		if (!spi_priv->crc_off)
-			len2 = len + tmp + NUM_CRC_BYTES;
-		else
-			len2 = len + tmp;
-	} else {
-		len2 = len + (NUM_RSP_BYTES + NUM_DUMMY_BYTES);
-	}
-#undef NUM_DUMMY_BYTES
-
-	if (len2 > ARRAY_SIZE(wb)) {
-		dev_err(&spi->dev, "spi buffer size too small (%d) (%zu)\n",
-			len2, ARRAY_SIZE(wb));
-		return -EINVAL;
-	}
-	/* zero spi write buffers. */
-	for (wix = len; wix < len2; wix++)
-		wb[wix] = 0;
-	rix = len;
-
-	if (wilc_spi_tx_rx(wilc, wb, rb, len2)) {
-		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Command/Control response
-	 */
-	if (cmd == CMD_RESET || cmd == CMD_TERMINATE || cmd == CMD_REPEAT)
-		rix++; /* skip 1 byte */
-
-	rsp = rb[rix++];
-
-	if (rsp != cmd) {
-		dev_err(&spi->dev,
-			"Failed cmd response, cmd (%02x), resp (%02x)\n",
-			cmd, rsp);
-		return -EINVAL;
-	}
-
-	/*
-	 * State response
-	 */
-	rsp = rb[rix++];
-	if (rsp != 0x00) {
-		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
-			rsp);
-		return -EINVAL;
-	}
-
-	if (cmd == CMD_INTERNAL_READ || cmd == CMD_SINGLE_READ ||
-	    cmd == CMD_DMA_READ || cmd == CMD_DMA_EXT_READ) {
-		/*
-		 * Data Respnose header
-		 */
-		retry = 100;
-		do {
-			/*
-			 * ensure there is room in buffer later
-			 * to read data and crc
-			 */
-			if (rix < len2) {
-				rsp = rb[rix++];
-			} else {
-				retry = 0;
-				break;
-			}
-			if (((rsp >> 4) & 0xf) == 0xf)
-				break;
-		} while (retry--);
-
-		if (retry <= 0) {
-			dev_err(&spi->dev,
-				"Error, data read response (%02x)\n", rsp);
-			return -EAGAIN;
-		}
-	}
-
-	if (cmd == CMD_INTERNAL_READ || cmd == CMD_SINGLE_READ) {
-		/*
-		 * Read bytes
-		 */
-		if ((rix + 3) < len2) {
-			b[0] = rb[rix++];
-			b[1] = rb[rix++];
-			b[2] = rb[rix++];
-			b[3] = rb[rix++];
-		} else {
-			dev_err(&spi->dev,
-				"buffer overrun when reading data.\n");
-			return -EINVAL;
-		}
-
-		if (!spi_priv->crc_off) {
-			/*
-			 * Read Crc
-			 */
-			if ((rix + 1) < len2) {
-				crc[0] = rb[rix++];
-				crc[1] = rb[rix++];
-			} else {
-				dev_err(&spi->dev,
-					"buffer overrun when reading crc.\n");
-				return -EINVAL;
-			}
-		}
-	} else if ((cmd == CMD_DMA_READ) || (cmd == CMD_DMA_EXT_READ)) {
-		int ix;
-
-		/* some data may be read in response to dummy bytes. */
-		for (ix = 0; (rix < len2) && (ix < sz); )
-			b[ix++] = rb[rix++];
-
-		sz -= ix;
-
-		if (sz > 0) {
-			int nbytes;
-
-			if (sz <= (DATA_PKT_SZ - ix))
-				nbytes = sz;
-			else
-				nbytes = DATA_PKT_SZ - ix;
-
-			/*
-			 * Read bytes
-			 */
-			if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
-				dev_err(&spi->dev,
-					"Failed block read, bus err\n");
-				return -EINVAL;
-			}
-
-			/*
-			 * Read Crc
-			 */
-			if (!spi_priv->crc_off && wilc_spi_rx(wilc, crc, 2)) {
-				dev_err(&spi->dev,
-					"Failed block crc read, bus err\n");
-				return -EINVAL;
-			}
-
-			ix += nbytes;
-			sz -= nbytes;
-		}
-
-		/*
-		 * if any data in left unread,
-		 * then read the rest using normal DMA code.
-		 */
-		while (sz > 0) {
-			int nbytes;
-
-			if (sz <= DATA_PKT_SZ)
-				nbytes = sz;
-			else
-				nbytes = DATA_PKT_SZ;
-
-			/*
-			 * read data response only on the next DMA cycles not
-			 * the first DMA since data response header is already
-			 * handled above for the first DMA.
-			 */
-			/*
-			 * Data Respnose header
-			 */
-			retry = 10;
-			do {
-				if (wilc_spi_rx(wilc, &rsp, 1)) {
-					dev_err(&spi->dev,
-						"Failed resp read, bus err\n");
-					result = -EINVAL;
-					break;
-				}
-				if (((rsp >> 4) & 0xf) == 0xf)
-					break;
-			} while (retry--);
-
-			if (result)
-				break;
-
-			/*
-			 * Read bytes
-			 */
-			if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
-				dev_err(&spi->dev,
-					"Failed block read, bus err\n");
-				result = -EINVAL;
-				break;
-			}
-
-			/*
-			 * Read Crc
-			 */
-			if (!spi_priv->crc_off && wilc_spi_rx(wilc, crc, 2)) {
-				dev_err(&spi->dev,
-					"Failed block crc read, bus err\n");
-				result = -EINVAL;
-				break;
-			}
-
-			ix += nbytes;
-			sz -= nbytes;
-		}
-	}
-	return result;
-}
-
 static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
 {
 	struct spi_device *spi = to_spi_device(wilc->dev);
@@ -686,19 +408,328 @@  static int spi_data_write(struct wilc *wilc, u8 *b, u32 sz)
  *      Spi Internal Read/Write Function
  *
  ********************************************/
+static int wilc_spi_single_read(struct wilc *wilc, u8 cmd, u32 adr, void *b,
+				u8 clockless)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	struct wilc_spi *spi_priv = wilc->bus_data;
+	u8 wb[32], rb[32];
+	int cmd_len, resp_len;
+	u8 crc[2];
+	struct wilc_spi_cmd *c;
+	struct wilc_spi_read_rsp_data *r;
+
+	memset(wb, 0x0, sizeof(wb));
+	memset(rb, 0x0, sizeof(rb));
+	c = (struct wilc_spi_cmd *)wb;
+	c->cmd_type = cmd;
+	if (cmd == CMD_SINGLE_READ) {
+		c->u.simple_cmd.addr[0] = adr >> 16;
+		c->u.simple_cmd.addr[1] = adr >> 8;
+		c->u.simple_cmd.addr[2] = adr;
+	} else if (cmd == CMD_INTERNAL_READ) {
+		c->u.simple_cmd.addr[0] = adr >> 8;
+		if (clockless == 1)
+			c->u.simple_cmd.addr[0] |= BIT(7);
+		c->u.simple_cmd.addr[1] = adr;
+		c->u.simple_cmd.addr[2] = 0x0;
+	} else {
+		dev_err(&spi->dev, "cmd [%x] not supported\n", cmd);
+		return -EINVAL;
+	}
+
+	cmd_len = offsetof(struct wilc_spi_cmd, u.simple_cmd.crc);
+	resp_len = sizeof(*r);
+	if (!spi_priv->crc_off) {
+		c->u.simple_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
+		cmd_len += 1;
+		resp_len += 2;
+	}
+
+	if (cmd_len + resp_len > ARRAY_SIZE(wb)) {
+		dev_err(&spi->dev,
+			"spi buffer size too small (%d) (%d) (%zu)\n",
+			cmd_len, resp_len, ARRAY_SIZE(wb));
+		return -EINVAL;
+	}
+
+	if (wilc_spi_tx_rx(wilc, wb, rb, cmd_len + resp_len)) {
+		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
+		return -EINVAL;
+	}
+
+	r = (struct wilc_spi_read_rsp_data *)&rb[cmd_len];
+	if (r->rsp_cmd_type != cmd) {
+		dev_err(&spi->dev,
+			"Failed cmd response, cmd (%02x), resp (%02x)\n",
+			cmd, r->rsp_cmd_type);
+		return -EINVAL;
+	}
+
+	if (r->status != WILC_SPI_COMMAND_STAT_SUCCESS) {
+		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
+			r->status);
+		return -EINVAL;
+	}
+
+	if (WILC_GET_RESP_HDR_START(r->resp_header) != 0xf) {
+		dev_err(&spi->dev, "Error, data read response (%02x)\n",
+			r->resp_header);
+		return -EINVAL;
+	}
+
+	if (b)
+		memcpy(b, r->resp_data, 4);
+
+	if (!spi_priv->crc_off)
+		memcpy(crc, r->crc, 2);
+
+	return 0;
+}
+
+static int wilc_spi_write_cmd(struct wilc *wilc, u8 cmd, u32 adr, u32 data,
+			      u8 clockless)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	struct wilc_spi *spi_priv = wilc->bus_data;
+	u8 wb[32], rb[32];
+	int cmd_len, resp_len;
+	struct wilc_spi_cmd *c;
+	struct wilc_spi_rsp_data *r;
+
+	memset(wb, 0x0, sizeof(wb));
+	memset(rb, 0x0, sizeof(rb));
+	c = (struct wilc_spi_cmd *)wb;
+	c->cmd_type = cmd;
+	if (cmd == CMD_INTERNAL_WRITE) {
+		c->u.internal_w_cmd.addr[0] = adr >> 8;
+		if (clockless == 1)
+			c->u.internal_w_cmd.addr[0] |= BIT(7);
+
+		c->u.internal_w_cmd.addr[1] = adr;
+		c->u.internal_w_cmd.data = cpu_to_be32(data);
+		cmd_len = offsetof(struct wilc_spi_cmd, u.internal_w_cmd.crc);
+		if (!spi_priv->crc_off)
+			c->u.internal_w_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
+	} else if (cmd == CMD_SINGLE_WRITE) {
+		c->u.w_cmd.addr[0] = adr >> 16;
+		c->u.w_cmd.addr[1] = adr >> 8;
+		c->u.w_cmd.addr[2] = adr;
+		c->u.w_cmd.data = cpu_to_be32(data);
+		cmd_len = offsetof(struct wilc_spi_cmd, u.w_cmd.crc);
+		if (!spi_priv->crc_off)
+			c->u.w_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
+	} else {
+		dev_err(&spi->dev, "write cmd [%x] not supported\n", cmd);
+		return -EINVAL;
+	}
+
+	if (!spi_priv->crc_off)
+		cmd_len += 1;
+
+	resp_len = sizeof(*r);
+
+	if (cmd_len + resp_len > ARRAY_SIZE(wb)) {
+		dev_err(&spi->dev,
+			"spi buffer size too small (%d) (%d) (%zu)\n",
+			cmd_len, resp_len, ARRAY_SIZE(wb));
+		return -EINVAL;
+	}
+
+	if (wilc_spi_tx_rx(wilc, wb, rb, cmd_len + resp_len)) {
+		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
+		return -EINVAL;
+	}
+
+	r = (struct wilc_spi_rsp_data *)&rb[cmd_len];
+	if (r->rsp_cmd_type != cmd) {
+		dev_err(&spi->dev,
+			"Failed cmd response, cmd (%02x), resp (%02x)\n",
+			cmd, r->rsp_cmd_type);
+		return -EINVAL;
+	}
+
+	if (r->status != WILC_SPI_COMMAND_STAT_SUCCESS) {
+		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
+			r->status);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wilc_spi_dma_rw(struct wilc *wilc, u8 cmd, u32 adr, u8 *b, u32 sz)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	struct wilc_spi *spi_priv = wilc->bus_data;
+	u8 wb[32], rb[32];
+	int cmd_len, resp_len;
+	int retry, ix = 0;
+	u8 crc[2];
+	struct wilc_spi_cmd *c;
+	struct wilc_spi_rsp_data *r;
+
+	memset(wb, 0x0, sizeof(wb));
+	memset(rb, 0x0, sizeof(rb));
+	c = (struct wilc_spi_cmd *)wb;
+	c->cmd_type = cmd;
+	if (cmd == CMD_DMA_WRITE || cmd == CMD_DMA_READ) {
+		c->u.dma_cmd.addr[0] = adr >> 16;
+		c->u.dma_cmd.addr[1] = adr >> 8;
+		c->u.dma_cmd.addr[2] = adr;
+		c->u.dma_cmd.size[0] = sz >> 8;
+		c->u.dma_cmd.size[1] = sz;
+		cmd_len = offsetof(struct wilc_spi_cmd, u.dma_cmd.crc);
+		if (!spi_priv->crc_off)
+			c->u.dma_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
+	} else if (cmd == CMD_DMA_EXT_WRITE || cmd == CMD_DMA_EXT_READ) {
+		c->u.dma_cmd_ext.addr[0] = adr >> 16;
+		c->u.dma_cmd_ext.addr[1] = adr >> 8;
+		c->u.dma_cmd_ext.addr[2] = adr;
+		c->u.dma_cmd_ext.size[0] = sz >> 16;
+		c->u.dma_cmd_ext.size[1] = sz >> 8;
+		c->u.dma_cmd_ext.size[2] = sz;
+		cmd_len = offsetof(struct wilc_spi_cmd, u.dma_cmd_ext.crc);
+		if (!spi_priv->crc_off)
+			c->u.dma_cmd_ext.crc[0] = wilc_get_crc7(wb, cmd_len);
+	} else {
+		dev_err(&spi->dev, "dma read write cmd [%x] not supported\n",
+			cmd);
+		return -EINVAL;
+	}
+	if (!spi_priv->crc_off)
+		cmd_len += 1;
+
+	resp_len = sizeof(*r);
+
+	if (cmd_len + resp_len > ARRAY_SIZE(wb)) {
+		dev_err(&spi->dev, "spi buffer size too small (%d)(%d) (%zu)\n",
+			cmd_len, resp_len, ARRAY_SIZE(wb));
+		return -EINVAL;
+	}
+
+	if (wilc_spi_tx_rx(wilc, wb, rb, cmd_len + resp_len)) {
+		dev_err(&spi->dev, "Failed cmd write, bus error...\n");
+		return -EINVAL;
+	}
+
+	r = (struct wilc_spi_rsp_data *)&rb[cmd_len];
+	if (r->rsp_cmd_type != cmd) {
+		dev_err(&spi->dev,
+			"Failed cmd response, cmd (%02x), resp (%02x)\n",
+			cmd, r->rsp_cmd_type);
+		return -EINVAL;
+	}
+
+	if (r->status != WILC_SPI_COMMAND_STAT_SUCCESS) {
+		dev_err(&spi->dev, "Failed cmd state response state (%02x)\n",
+			r->status);
+		return -EINVAL;
+	}
+
+	if (cmd == CMD_DMA_WRITE || cmd == CMD_DMA_EXT_WRITE)
+		return 0;
+
+	while (sz > 0) {
+		int nbytes;
+		u8 rsp;
+
+		if (sz <= DATA_PKT_SZ)
+			nbytes = sz;
+		else
+			nbytes = DATA_PKT_SZ;
+
+		/*
+		 * Data Response header
+		 */
+		retry = 100;
+		do {
+			if (wilc_spi_rx(wilc, &rsp, 1)) {
+				dev_err(&spi->dev,
+					"Failed resp read, bus err\n");
+				return -EINVAL;
+			}
+			if (WILC_GET_RESP_HDR_START(rsp) == 0xf)
+				break;
+		} while (retry--);
+
+		/*
+		 * Read bytes
+		 */
+		if (wilc_spi_rx(wilc, &b[ix], nbytes)) {
+			dev_err(&spi->dev,
+				"Failed block read, bus err\n");
+			return -EINVAL;
+		}
+
+		/*
+		 * Read Crc
+		 */
+		if (!spi_priv->crc_off && wilc_spi_rx(wilc, crc, 2)) {
+			dev_err(&spi->dev,
+				"Failed block crc read, bus err\n");
+			return -EINVAL;
+		}
+
+		ix += nbytes;
+		sz -= nbytes;
+	}
+	return 0;
+}
+
+static int wilc_spi_read_reg(struct wilc *wilc, u32 addr, u32 *data)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	int result;
+	u8 cmd = CMD_SINGLE_READ;
+	u8 clockless = 0;
+
+	if (addr < 0x30) {
+		/* Clockless register */
+		cmd = CMD_INTERNAL_READ;
+		clockless = 1;
+	}
+
+	result = wilc_spi_single_read(wilc, cmd, addr, data, clockless);
+	if (result) {
+		dev_err(&spi->dev, "Failed cmd, read reg (%08x)...\n", addr);
+		return result;
+	}
+
+	le32_to_cpus(data);
+
+	return 0;
+}
+
+static int wilc_spi_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
+{
+	struct spi_device *spi = to_spi_device(wilc->dev);
+	int result;
+
+	if (size <= 4)
+		return -EINVAL;
+
+	result = wilc_spi_dma_rw(wilc, CMD_DMA_EXT_READ, addr, buf, size);
+	if (result) {
+		dev_err(&spi->dev, "Failed cmd, read block (%08x)...\n", addr);
+		return result;
+	}
+
+	return 0;
+}
 
 static int spi_internal_write(struct wilc *wilc, u32 adr, u32 dat)
 {
 	struct spi_device *spi = to_spi_device(wilc->dev);
 	int result;
 
-	cpu_to_le32s(&dat);
-	result = spi_cmd_complete(wilc, CMD_INTERNAL_WRITE, adr, (u8 *)&dat, 4,
-				  0);
-	if (result)
+	result = wilc_spi_write_cmd(wilc, CMD_INTERNAL_WRITE, adr, dat, 0);
+	if (result) {
 		dev_err(&spi->dev, "Failed internal write cmd...\n");
+		return result;
+	}
 
-	return result;
+	return 0;
 }
 
 static int spi_internal_read(struct wilc *wilc, u32 adr, u32 *data)
@@ -706,8 +737,7 @@  static int spi_internal_read(struct wilc *wilc, u32 adr, u32 *data)
 	struct spi_device *spi = to_spi_device(wilc->dev);
 	int result;
 
-	result = spi_cmd_complete(wilc, CMD_INTERNAL_READ, adr, (u8 *)data, 4,
-				  0);
+	result = wilc_spi_single_read(wilc, CMD_INTERNAL_READ, adr, data, 0);
 	if (result) {
 		dev_err(&spi->dev, "Failed internal read cmd...\n");
 		return result;
@@ -715,7 +745,7 @@  static int spi_internal_read(struct wilc *wilc, u32 adr, u32 *data)
 
 	le32_to_cpus(data);
 
-	return result;
+	return 0;
 }
 
 /********************************************
@@ -731,18 +761,19 @@  static int wilc_spi_write_reg(struct wilc *wilc, u32 addr, u32 data)
 	u8 cmd = CMD_SINGLE_WRITE;
 	u8 clockless = 0;
 
-	cpu_to_le32s(&data);
 	if (addr < 0x30) {
 		/* Clockless register */
 		cmd = CMD_INTERNAL_WRITE;
 		clockless = 1;
 	}
 
-	result = spi_cmd_complete(wilc, cmd, addr, (u8 *)&data, 4, clockless);
-	if (result)
+	result = wilc_spi_write_cmd(wilc, cmd, addr, data, clockless);
+	if (result) {
 		dev_err(&spi->dev, "Failed cmd, write reg (%08x)...\n", addr);
+		return result;
+	}
 
-	return result;
+	return 0;
 }
 
 static int wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
@@ -756,7 +787,7 @@  static int wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
 	if (size <= 4)
 		return -EINVAL;
 
-	result = spi_cmd_complete(wilc, CMD_DMA_EXT_WRITE, addr, NULL, size, 0);
+	result = wilc_spi_dma_rw(wilc, CMD_DMA_EXT_WRITE, addr, NULL, size);
 	if (result) {
 		dev_err(&spi->dev,
 			"Failed cmd, write block (%08x)...\n", addr);
@@ -767,51 +798,14 @@  static int wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
 	 * Data
 	 */
 	result = spi_data_write(wilc, buf, size);
-	if (result)
-		dev_err(&spi->dev, "Failed block data write...\n");
-
-	return result;
-}
-
-static int wilc_spi_read_reg(struct wilc *wilc, u32 addr, u32 *data)
-{
-	struct spi_device *spi = to_spi_device(wilc->dev);
-	int result;
-	u8 cmd = CMD_SINGLE_READ;
-	u8 clockless = 0;
-
-	if (addr < 0x30) {
-		/* Clockless register */
-		cmd = CMD_INTERNAL_READ;
-		clockless = 1;
-	}
-
-	result = spi_cmd_complete(wilc, cmd, addr, (u8 *)data, 4, clockless);
 	if (result) {
-		dev_err(&spi->dev, "Failed cmd, read reg (%08x)...\n", addr);
+		dev_err(&spi->dev, "Failed block data write...\n");
 		return result;
 	}
 
-	le32_to_cpus(data);
-
 	return 0;
 }
 
-static int wilc_spi_read(struct wilc *wilc, u32 addr, u8 *buf, u32 size)
-{
-	struct spi_device *spi = to_spi_device(wilc->dev);
-	int result;
-
-	if (size <= 4)
-		return -EINVAL;
-
-	result = spi_cmd_complete(wilc, CMD_DMA_EXT_READ, addr, buf, size, 0);
-	if (result)
-		dev_err(&spi->dev, "Failed cmd, read block (%08x)...\n", addr);
-
-	return result;
-}
-
 /********************************************
  *
  *      Bus interfaces