diff mbox series

[3/8] staging: wilc1000: refactor interrupt handling for sdio

Message ID 20200214172250.13026-4-ajay.kathat@microchip.com (mailing list archive)
State Not Applicable
Delegated to: Johannes Berg
Headers show
Series staging: wilc1000: remove magic values and handle review comments | expand

Commit Message

Ajay Singh Feb. 14, 2020, 11:52 a.m. UTC
From: Ajay Singh <ajay.kathat@microchip.com>

Make use of FIELD_PREP/FIELD_GET macro to refactor the interrupt
handling for SDIO.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
---
 drivers/staging/wilc1000/sdio.c | 98 ++++++++++++---------------------
 drivers/staging/wilc1000/spi.c  |  4 --
 drivers/staging/wilc1000/wlan.h |  3 +
 3 files changed, 39 insertions(+), 66 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/wilc1000/sdio.c b/drivers/staging/wilc1000/sdio.c
index 77ef84f9cc37..66706efc5711 100644
--- a/drivers/staging/wilc1000/sdio.c
+++ b/drivers/staging/wilc1000/sdio.c
@@ -26,7 +26,6 @@  static const struct sdio_device_id wilc_sdio_ids[] = {
 struct wilc_sdio {
 	bool irq_gpio;
 	u32 block_size;
-	int nint;
 	int has_thrpt_enh3;
 };
 
@@ -790,6 +789,7 @@  static int wilc_sdio_read_int(struct wilc *wilc, u32 *int_status)
 	struct sdio_func *func = dev_to_sdio_func(wilc->dev);
 	struct wilc_sdio *sdio_priv = wilc->bus_data;
 	u32 tmp;
+	u8 irq_flags;
 	struct sdio_cmd52 cmd;
 
 	wilc_sdio_read_size(wilc, &tmp);
@@ -798,44 +798,22 @@  static int wilc_sdio_read_int(struct wilc *wilc, u32 *int_status)
 	 *      Read IRQ flags
 	 **/
 	if (!sdio_priv->irq_gpio) {
-		int i;
-
-		cmd.read_write = 0;
 		cmd.function = 1;
 		cmd.address = 0x04;
-		cmd.data = 0;
-		wilc_sdio_cmd52(wilc, &cmd);
-
-		if (cmd.data & BIT(0))
-			tmp |= INT_0;
-		if (cmd.data & BIT(2))
-			tmp |= INT_1;
-		if (cmd.data & BIT(3))
-			tmp |= INT_2;
-		if (cmd.data & BIT(4))
-			tmp |= INT_3;
-		if (cmd.data & BIT(5))
-			tmp |= INT_4;
-		for (i = sdio_priv->nint; i < MAX_NUM_INT; i++) {
-			if ((tmp >> (IRG_FLAGS_OFFSET + i)) & 0x1) {
-				dev_err(&func->dev,
-					"Unexpected interrupt (1) : tmp=%x, data=%x\n",
-					tmp, cmd.data);
-				break;
-			}
-		}
 	} else {
-		u32 irq_flags;
-
-		cmd.read_write = 0;
 		cmd.function = 0;
-		cmd.raw = 0;
 		cmd.address = 0xf7;
-		cmd.data = 0;
-		wilc_sdio_cmd52(wilc, &cmd);
-		irq_flags = cmd.data & 0x1f;
-		tmp |= ((irq_flags >> 0) << IRG_FLAGS_OFFSET);
 	}
+	cmd.raw = 0;
+	cmd.read_write = 0;
+	cmd.data = 0;
+	wilc_sdio_cmd52(wilc, &cmd);
+	irq_flags = cmd.data;
+	tmp |= FIELD_PREP(IRG_FLAGS_MASK, cmd.data);
+
+	if (FIELD_GET(UNHANDLED_IRQ_MASK, irq_flags))
+		dev_err(&func->dev, "Unexpected interrupt (1) int=%lx\n",
+			FIELD_GET(UNHANDLED_IRQ_MASK, irq_flags));
 
 	*int_status = tmp;
 
@@ -890,38 +868,36 @@  static int wilc_sdio_clear_int_ext(struct wilc *wilc, u32 val)
 		 * Must clear each interrupt individually.
 		 */
 		u32 flags;
+		int i;
 
 		flags = val & (BIT(MAX_NUM_INT) - 1);
-		if (flags) {
-			int i;
-
-			for (i = 0; i < sdio_priv->nint; i++) {
-				if (flags & 1) {
-					struct sdio_cmd52 cmd;
-
-					cmd.read_write = 1;
-					cmd.function = 0;
-					cmd.raw = 0;
-					cmd.address = 0xf8;
-					cmd.data = BIT(i);
-
-					ret = wilc_sdio_cmd52(wilc, &cmd);
-					if (ret) {
-						dev_err(&func->dev,
-							"Failed cmd52, set 0xf8 data (%d) ...\n",
-							__LINE__);
-						return ret;
-					}
+		for (i = 0; i < NUM_INT_EXT && flags; i++) {
+			if (flags & BIT(i)) {
+				struct sdio_cmd52 cmd;
+
+				cmd.read_write = 1;
+				cmd.function = 0;
+				cmd.raw = 0;
+				cmd.address = 0xf8;
+				cmd.data = BIT(i);
+
+				ret = wilc_sdio_cmd52(wilc, &cmd);
+				if (ret) {
+					dev_err(&func->dev,
+						"Failed cmd52, set 0xf8 data (%d) ...\n",
+						__LINE__);
+					return ret;
 				}
-				flags >>= 1;
+				flags &= ~BIT(i);
 			}
+		}
 
-			for (i = sdio_priv->nint; i < MAX_NUM_INT; i++) {
-				if (flags & 1)
-					dev_err(&func->dev,
-						"Unexpected interrupt cleared %d...\n",
-						i);
-				flags >>= 1;
+		for (i = NUM_INT_EXT; i < MAX_NUM_INT && flags; i++) {
+			if (flags & BIT(i)) {
+				dev_err(&func->dev,
+					"Unexpected interrupt cleared %d...\n",
+					i);
+				flags &= ~BIT(i);
 			}
 		}
 	}
@@ -967,8 +943,6 @@  static int wilc_sdio_sync_ext(struct wilc *wilc, int nint)
 		return -EINVAL;
 	}
 
-	sdio_priv->nint = nint;
-
 	/**
 	 *      Disable power sequencer
 	 **/
diff --git a/drivers/staging/wilc1000/spi.c b/drivers/staging/wilc1000/spi.c
index 300c5c832572..37be627e72ce 100644
--- a/drivers/staging/wilc1000/spi.c
+++ b/drivers/staging/wilc1000/spi.c
@@ -12,7 +12,6 @@ 
 
 struct wilc_spi {
 	int crc_off;
-	int nint;
 };
 
 static const struct wilc_hif_func wilc_hif_spi;
@@ -916,7 +915,6 @@  static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
 static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
 {
 	struct spi_device *spi = to_spi_device(wilc->dev);
-	struct wilc_spi *spi_priv = wilc->bus_data;
 	u32 reg;
 	int ret, i;
 
@@ -925,8 +923,6 @@  static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
 		return -EINVAL;
 	}
 
-	spi_priv->nint = nint;
-
 	/*
 	 * interrupt pin mux select
 	 */
diff --git a/drivers/staging/wilc1000/wlan.h b/drivers/staging/wilc1000/wlan.h
index 876b02e93a81..27f08b375345 100644
--- a/drivers/staging/wilc1000/wlan.h
+++ b/drivers/staging/wilc1000/wlan.h
@@ -176,6 +176,8 @@ 
 #define INT_4			BIT(IRG_FLAGS_OFFSET + 4)
 #define INT_5			BIT(IRG_FLAGS_OFFSET + 5)
 #define MAX_NUM_INT		5
+#define IRG_FLAGS_MASK		GENMASK(IRG_FLAGS_OFFSET + MAX_NUM_INT, \
+					IRG_FLAGS_OFFSET)
 
 /*******************************************/
 /*        E0 and later Interrupt flags.    */
@@ -203,6 +205,7 @@ 
 #define DATA_INT_EXT		INT_0
 #define ALL_INT_EXT		DATA_INT_EXT
 #define NUM_INT_EXT		1
+#define UNHANDLED_IRQ_MASK	GENMASK(MAX_NUM_INT - 1, NUM_INT_EXT)
 
 #define DATA_INT_CLR		CLR_INT0